Re: [PATCH v5 6/6] arm64: dts: add dts nodes for MT6779

[Hanks Chen <hanks.chen@mediatek.com>]

On Mon, 2020-06-22 at 13:25 +0200, Matthias Brugger wrote:
> 
> On 16/06/2020 15:34, Hanks Chen wrote:
> > On Wed, 2020-03-25 at 17:39 +0100, Matthias Brugger wrote:
> >>
> >> On 25/03/2020 10:31, Hanks Chen wrote:
> >>> this adds initial MT6779 dts settings fo board support,
> >>
> >> "for board support"
> >>
> >>> including cpu, gic, timer, ccf, pinctrl, uart...etc.
> >>
> >> The etc is PMU and PSCI and sysirq, correct? Let's list at least sysirq as this
> >> is something MediaTek specific.
> >>
> >>>
> >>> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> >>> ---
> >>>  arch/arm64/boot/dts/mediatek/Makefile       |    1 +
> >>>  arch/arm64/boot/dts/mediatek/mt6779-evb.dts |   31 ++++
> >>>  arch/arm64/boot/dts/mediatek/mt6779.dtsi    |  265 +++++++++++++++++++++++++++
> >>>  3 files changed, 297 insertions(+)
> >>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> >>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
> >>>
> >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> >>> index 458bbc4..53f1c61 100644
> >>> --- a/arch/arm64/boot/dts/mediatek/Makefile
> >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> >>> @@ -1,6 +1,7 @@
> >>>  # SPDX-License-Identifier: GPL-2.0
> >>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> >>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
> >>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> >>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> >>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> >>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> >>> new file mode 100644
> >>> index 0000000..164f5cb
> >>> --- /dev/null
> >>> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> >>> @@ -0,0 +1,31 @@
> >>> +// SPDX-License-Identifier: GPL-2.0+
> >>> +/*
> >>> + * Copyright (c) 2019 MediaTek Inc.
> >>> + * Author: Mars.C <mars.cheng@mediatek.com>
> >>> + *
> >>> + */
> >>> +
> >>> +/dts-v1/;
> >>> +#include "mt6779.dtsi"
> >>> +
> >>> +/ {
> >>> +	model = "MediaTek MT6779 EVB";
> >>> +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> >>> +
> >>> +	aliases {
> >>> +		serial0 = &uart0;
> >>> +	};
> >>> +
> >>> +	memory@40000000 {
> >>> +		device_type = "memory";
> >>> +		reg = <0 0x40000000 0 0x1e800000>;
> >>> +	};
> >>> +
> >>> +	chosen {
> >>> +		stdout-path = "serial0:921600n8";
> >>> +	};
> >>> +};
> >>> +
> >>> +&uart0 {
> >>> +	status = "okay";
> >>> +};
> >>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> >>> new file mode 100644
> >>> index 0000000..422ff5f
> >>> --- /dev/null
> >>> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> >>> @@ -0,0 +1,265 @@
> >> [...]
> >>> +
> >>> +	uart_clk: dummy26m {
> >>> +		compatible = "fixed-clock";
> >>> +		clock-frequency = <26000000>;
> >>> +		#clock-cells = <0>;
> >>> +	};
> >>
> >> No real clocks for uart? What about CLK_INFRA_UARTx?
> > 
> > sorry, I miss the clocks for uart
> > I'll add "baud" and "bus" in next version.
> > 
> > clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
> > clock-names = "baud", "bus";
> > 
> > 
> >>
> >>> +
> >>> +	timer {
> >>> +		compatible = "arm,armv8-timer";
> >>> +		interrupt-parent = <&gic>;
> >>> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> >>> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> >>> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> >>> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> >>> +	};
> >>> +
> >>> +	soc {
> >>> +		#address-cells = <2>;
> >>> +		#size-cells = <2>;
> >>> +		compatible = "simple-bus";
> >>> +		ranges;
> >>> +
> >> [...]
> >>> +
> >>> +		uart0: serial@11002000 {
> >>> +			compatible = "mediatek,mt6779-uart",
> >>> +				     "mediatek,mt6577-uart";
> >>> +			reg = <0 0x11002000 0 0x400>;
> >>> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> >>> +			clocks = <&uart_clk>;
> >>> +			status = "disabled";
> >>> +		};
> >>> +
> >>> +		uart1: serial@11003000 {
> >>> +			compatible = "mediatek,mt6779-uart",
> >>> +				     "mediatek,mt6577-uart";
> >>> +			reg = <0 0x11003000 0 0x400>;
> >>> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
> >>> +			clocks = <&uart_clk>;
> >>> +			status = "disabled";
> >>> +		};
> >>
> >> SoC has only two UARTs but clock driver has three, how comes?
> >>
> > 
> > In mt6779 SoC, we have four UARTs.
> > but we only use UART0 and UART1 as standard serial ports for APMCU.The
> > others for modem side.
> > so we add two UARTs in dts.
> > 
> 
> Sorry for the late reply.
> 
> DTS describes the HW, so we should add all four to the mt6779.dtsi but only
> enable the one that can be used.
> BTW I thought modem works through user space application, so why don't you want
> to expose them?
> 
> Regards,
> Matthias
> 

Thank you for your comment.

In MT6779 platform, MDMCUs control UART2 and UART3 directly, it doesn't
need any support from apmcu.

but I'll add all four to the mt6779 dtsi to share the info in next
version.(v7)


Thanks
Hanks

> >>> +
> >>> +		audio: clock-controller@11210000 {
> >>> +			compatible = "mediatek,mt6779-audio", "syscon";
> >>> +			reg = <0 0x11210000 0 0x1000>;
> >>> +			#clock-cells = <1>;
> >>> +		};
> >>> +
> >>> +		mfgcfg: clock-controller@13fbf000 {
> >>> +			compatible = "mediatek,mt6779-mfgcfg", "syscon";
> >>> +			reg = <0 0x13fbf000 0 0x1000>;
> >>> +			#clock-cells = <1>;
> >>> +		};
> >>> +
> >>> +		mmsys: clock-controller@14000000 {
> >>> +			compatible = "mediatek,mt6779-mmsys", "syscon";
> >>> +			reg = <0 0x14000000 0 0x1000>;
> >>> +			#clock-cells = <1>;
> >>> +		};
> >>
> >> Please beware that we are refactoring the mmsys right now. Please use this new
> >> approach as this will go upstream soon.
> >>
> >> https://patchwork.kernel.org/project/linux-mediatek/list/?series=254897
> >>
> > Got it, I'll update new approach in next version.
> > Thanks!
> > 
> >> Regards,
> >> Matthias
> >>
> >> _______________________________________________
> >> Linux-mediatek mailing list
> >> Linux-mediatek@lists.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> >