All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tamizh Chelvam <tamizhr@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Tamizh Chelvam <tamizhr@codeaurora.org>
Subject: [PATCH 1/4] ath10k: Add wmi command support for station specific TID config
Date: Sun, 28 Jun 2020 22:31:55 +0530	[thread overview]
Message-ID: <1593363718-5148-2-git-send-email-tamizhr@codeaurora.org> (raw)
In-Reply-To: <1593363718-5148-1-git-send-email-tamizhr@codeaurora.org>

This patch adds WMI interface to configure station specific
TID configuration . Host needs to send station's MAC address
along with TID number and its configuration to target through
WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID.

WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise
this support.

Testing:
   * Tested HW: QCA9888
   * Tested FW: 10.4-3.5.1-00052

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c     | 32 +++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h     | 52 +++++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 0dd484f..fc9e3ae 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -224,6 +224,8 @@ struct wmi_ops {
 	struct sk_buff *(*gen_bb_timing)
 			(struct ath10k *ar,
 			 const struct wmi_bb_timing_cfg_arg *arg);
+	struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar,
+				const struct wmi_per_peer_per_tid_cfg_arg *arg);
 
 };
 
@@ -1656,4 +1658,21 @@ struct wmi_ops {
 	return ath10k_wmi_cmd_send(ar, skb,
 				   ar->wmi.cmd->set_bb_timing_cmdid);
 }
+
+static inline int
+ath10k_wmi_set_per_peer_per_tid_cfg(struct ath10k *ar,
+				const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_per_peer_per_tid_cfg)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_per_peer_per_tid_cfg(ar, arg);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->per_peer_per_tid_config_cmdid);
+}
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index a81a1ab..4316551 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -740,6 +740,7 @@
 	.tdls_peer_update_cmdid = WMI_10_4_TDLS_PEER_UPDATE_CMDID,
 	.tdls_set_offchan_mode_cmdid = WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
 	.radar_found_cmdid = WMI_10_4_RADAR_FOUND_CMDID,
+	.per_peer_per_tid_config_cmdid = WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
 };
 
 static struct wmi_peer_param_map wmi_peer_param_map = {
@@ -9005,6 +9006,36 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
 }
 
 static struct sk_buff *
+ath10k_wmi_10_4_gen_per_peer_per_tid_cfg(struct ath10k *ar,
+				const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+	struct wmi_peer_per_tid_cfg_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	memset(skb->data, 0, sizeof(*cmd));
+
+	cmd = (struct wmi_peer_per_tid_cfg_cmd *)skb->data;
+	cmd->vdev_id = cpu_to_le32(arg->vdev_id);
+	ether_addr_copy(cmd->peer_macaddr.addr, arg->peer_macaddr.addr);
+	cmd->tid = cpu_to_le32(arg->tid);
+	cmd->ack_policy = cpu_to_le32(arg->ack_policy);
+	cmd->aggr_control = cpu_to_le32(arg->aggr_control);
+	cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
+	cmd->retry_count = cpu_to_le32(arg->retry_count);
+	cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
+		   arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
+		   arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+	return skb;
+}
+
+static struct sk_buff *
 ath10k_wmi_op_gen_echo(struct ath10k *ar, u32 value)
 {
 	struct wmi_echo_cmd *cmd;
@@ -9413,6 +9444,7 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
 	.gen_pdev_get_tpc_table_cmdid =
 			ath10k_wmi_10_4_op_gen_pdev_get_tpc_table_cmdid,
 	.gen_radar_found = ath10k_wmi_10_4_gen_radar_found,
+	.gen_per_peer_per_tid_cfg = ath10k_wmi_10_4_gen_per_peer_per_tid_cfg,
 
 	/* shared with 10.2 */
 	.pull_echo_ev = ath10k_wmi_op_pull_echo_ev,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 511144b..7fed735 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -203,6 +203,7 @@ enum wmi_service {
 	WMI_SERVICE_SYNC_DELETE_CMDS,
 	WMI_SERVICE_TX_PWR_PER_PEER,
 	WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
+	WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 
 	/* Remember to add the new value to wmi_service_name()! */
 
@@ -503,6 +504,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
 	SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
 	SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
 	SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
+	SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
 
 	case WMI_SERVICE_MAX:
 		return NULL;
@@ -834,6 +836,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_TX_PWR_PER_PEER, len);
 	SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
 	       WMI_SERVICE_RESET_CHIP, len);
+	SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 }
 
 #undef SVCMAP
@@ -1036,6 +1040,7 @@ struct wmi_cmd_map {
 	u32 tdls_set_offchan_mode_cmdid;
 	u32 radar_found_cmdid;
 	u32 set_bb_timing_cmdid;
+	u32 per_peer_per_tid_config_cmdid;
 };
 
 /*
@@ -1877,6 +1882,8 @@ enum wmi_10_4_cmd_id {
 	WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
 	WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
 	WMI_10_4_RADAR_FOUND_CMDID,
+	WMI_10_4_PEER_CFR_CAPTURE_CMDID,
+	WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
 	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
 };
 
@@ -7220,6 +7227,51 @@ struct wmi_tdls_peer_event {
 	__le32 vdev_id;
 } __packed;
 
+enum wmi_tid_aggr_control_conf {
+	WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
+	WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
+	WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
+};
+
+enum wmi_noack_tid_conf {
+	WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
+	WMI_PEER_TID_CONFIG_ACK,
+	WMI_PEER_TID_CONFIG_NOACK,
+};
+
+enum wmi_tid_rate_ctrl_conf {
+	WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
+	WMI_TID_CONFIG_RATE_CONTROL_AUTO,
+	WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
+	WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+};
+
+struct wmi_per_peer_per_tid_cfg_arg {
+	u32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	u32 tid;
+	enum wmi_noack_tid_conf ack_policy;
+	enum wmi_tid_aggr_control_conf aggr_control;
+	u8 rate_ctrl;
+	u32 retry_count;
+	u32 rcode_flags;
+};
+
+struct wmi_peer_per_tid_cfg_cmd {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	__le32 tid;
+
+	/* see enum wmi_noack_tid_conf */
+	__le32 ack_policy;
+	/* see enum wmi_tid_aggr_control_conf */
+	__le32 aggr_control;
+	/* see enum wmi_tid_rate_ctrl_conf */
+	__le32 rate_control;
+	__le32 rcode_flags;
+	__le32 retry_count;
+} __packed;
+
 enum wmi_txbf_conf {
 	WMI_TXBF_CONF_UNSUPPORTED,
 	WMI_TXBF_CONF_BEFORE_ASSOC,
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: Tamizh Chelvam <tamizhr@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Tamizh Chelvam <tamizhr@codeaurora.org>
Subject: [PATCH 1/4] ath10k: Add wmi command support for station specific TID config
Date: Sun, 28 Jun 2020 22:31:55 +0530	[thread overview]
Message-ID: <1593363718-5148-2-git-send-email-tamizhr@codeaurora.org> (raw)
In-Reply-To: <1593363718-5148-1-git-send-email-tamizhr@codeaurora.org>

This patch adds WMI interface to configure station specific
TID configuration . Host needs to send station's MAC address
along with TID number and its configuration to target through
WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID.

WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise
this support.

Testing:
   * Tested HW: QCA9888
   * Tested FW: 10.4-3.5.1-00052

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c     | 32 +++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h     | 52 +++++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 0dd484f..fc9e3ae 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -224,6 +224,8 @@ struct wmi_ops {
 	struct sk_buff *(*gen_bb_timing)
 			(struct ath10k *ar,
 			 const struct wmi_bb_timing_cfg_arg *arg);
+	struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar,
+				const struct wmi_per_peer_per_tid_cfg_arg *arg);
 
 };
 
@@ -1656,4 +1658,21 @@ struct wmi_ops {
 	return ath10k_wmi_cmd_send(ar, skb,
 				   ar->wmi.cmd->set_bb_timing_cmdid);
 }
+
+static inline int
+ath10k_wmi_set_per_peer_per_tid_cfg(struct ath10k *ar,
+				const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_per_peer_per_tid_cfg)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_per_peer_per_tid_cfg(ar, arg);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->per_peer_per_tid_config_cmdid);
+}
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index a81a1ab..4316551 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -740,6 +740,7 @@
 	.tdls_peer_update_cmdid = WMI_10_4_TDLS_PEER_UPDATE_CMDID,
 	.tdls_set_offchan_mode_cmdid = WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
 	.radar_found_cmdid = WMI_10_4_RADAR_FOUND_CMDID,
+	.per_peer_per_tid_config_cmdid = WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
 };
 
 static struct wmi_peer_param_map wmi_peer_param_map = {
@@ -9005,6 +9006,36 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
 }
 
 static struct sk_buff *
+ath10k_wmi_10_4_gen_per_peer_per_tid_cfg(struct ath10k *ar,
+				const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+	struct wmi_peer_per_tid_cfg_cmd *cmd;
+	struct sk_buff *skb;
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	memset(skb->data, 0, sizeof(*cmd));
+
+	cmd = (struct wmi_peer_per_tid_cfg_cmd *)skb->data;
+	cmd->vdev_id = cpu_to_le32(arg->vdev_id);
+	ether_addr_copy(cmd->peer_macaddr.addr, arg->peer_macaddr.addr);
+	cmd->tid = cpu_to_le32(arg->tid);
+	cmd->ack_policy = cpu_to_le32(arg->ack_policy);
+	cmd->aggr_control = cpu_to_le32(arg->aggr_control);
+	cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
+	cmd->retry_count = cpu_to_le32(arg->retry_count);
+	cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
+		   arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
+		   arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+	return skb;
+}
+
+static struct sk_buff *
 ath10k_wmi_op_gen_echo(struct ath10k *ar, u32 value)
 {
 	struct wmi_echo_cmd *cmd;
@@ -9413,6 +9444,7 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
 	.gen_pdev_get_tpc_table_cmdid =
 			ath10k_wmi_10_4_op_gen_pdev_get_tpc_table_cmdid,
 	.gen_radar_found = ath10k_wmi_10_4_gen_radar_found,
+	.gen_per_peer_per_tid_cfg = ath10k_wmi_10_4_gen_per_peer_per_tid_cfg,
 
 	/* shared with 10.2 */
 	.pull_echo_ev = ath10k_wmi_op_pull_echo_ev,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 511144b..7fed735 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -203,6 +203,7 @@ enum wmi_service {
 	WMI_SERVICE_SYNC_DELETE_CMDS,
 	WMI_SERVICE_TX_PWR_PER_PEER,
 	WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
+	WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 
 	/* Remember to add the new value to wmi_service_name()! */
 
@@ -503,6 +504,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
 	SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
 	SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
 	SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
+	SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
 
 	case WMI_SERVICE_MAX:
 		return NULL;
@@ -834,6 +836,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_TX_PWR_PER_PEER, len);
 	SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
 	       WMI_SERVICE_RESET_CHIP, len);
+	SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 }
 
 #undef SVCMAP
@@ -1036,6 +1040,7 @@ struct wmi_cmd_map {
 	u32 tdls_set_offchan_mode_cmdid;
 	u32 radar_found_cmdid;
 	u32 set_bb_timing_cmdid;
+	u32 per_peer_per_tid_config_cmdid;
 };
 
 /*
@@ -1877,6 +1882,8 @@ enum wmi_10_4_cmd_id {
 	WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
 	WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
 	WMI_10_4_RADAR_FOUND_CMDID,
+	WMI_10_4_PEER_CFR_CAPTURE_CMDID,
+	WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
 	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
 };
 
@@ -7220,6 +7227,51 @@ struct wmi_tdls_peer_event {
 	__le32 vdev_id;
 } __packed;
 
+enum wmi_tid_aggr_control_conf {
+	WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
+	WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
+	WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
+};
+
+enum wmi_noack_tid_conf {
+	WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
+	WMI_PEER_TID_CONFIG_ACK,
+	WMI_PEER_TID_CONFIG_NOACK,
+};
+
+enum wmi_tid_rate_ctrl_conf {
+	WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
+	WMI_TID_CONFIG_RATE_CONTROL_AUTO,
+	WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
+	WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+};
+
+struct wmi_per_peer_per_tid_cfg_arg {
+	u32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	u32 tid;
+	enum wmi_noack_tid_conf ack_policy;
+	enum wmi_tid_aggr_control_conf aggr_control;
+	u8 rate_ctrl;
+	u32 retry_count;
+	u32 rcode_flags;
+};
+
+struct wmi_peer_per_tid_cfg_cmd {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	__le32 tid;
+
+	/* see enum wmi_noack_tid_conf */
+	__le32 ack_policy;
+	/* see enum wmi_tid_aggr_control_conf */
+	__le32 aggr_control;
+	/* see enum wmi_tid_rate_ctrl_conf */
+	__le32 rate_control;
+	__le32 rcode_flags;
+	__le32 retry_count;
+} __packed;
+
 enum wmi_txbf_conf {
 	WMI_TXBF_CONF_UNSUPPORTED,
 	WMI_TXBF_CONF_BEFORE_ASSOC,
-- 
1.9.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2020-06-28 17:02 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-28 17:01 [PATCH 0/4] ath10k: Add support for TID specific configuration Tamizh Chelvam
2020-06-28 17:01 ` Tamizh Chelvam
2020-06-28 17:01 ` Tamizh Chelvam [this message]
2020-06-28 17:01   ` [PATCH 1/4] ath10k: Add wmi command support for station specific TID config Tamizh Chelvam
2020-06-28 17:01 ` [PATCH 2/4] ath10k: Move rate mask validation function up in the file Tamizh Chelvam
2020-06-28 17:01   ` Tamizh Chelvam
2020-06-28 17:01 ` [PATCH 3/4] ath10k: Add new api to support TID specific configuration Tamizh Chelvam
2020-06-28 17:01   ` Tamizh Chelvam
2020-06-29  8:39   ` kernel test robot
2020-06-29  8:39     ` kernel test robot
2020-06-29  8:39     ` kernel test robot
2020-06-29 10:02   ` kernel test robot
2020-06-29 10:02     ` kernel test robot
2020-06-29 10:02     ` kernel test robot
2020-06-29 10:02   ` [RFC PATCH] ath10k: ath10k_mac_set_tid_config() can be static kernel test robot
2020-06-29 10:02     ` kernel test robot
2020-06-29 10:02     ` kernel test robot
2020-06-28 17:01 ` [PATCH 4/4] ath10k: Add new api to support reset TID config Tamizh Chelvam
2020-06-28 17:01   ` Tamizh Chelvam
2020-06-29  9:11   ` kernel test robot
2020-06-29  9:11     ` kernel test robot
2020-06-29  9:11     ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1593363718-5148-2-git-send-email-tamizhr@codeaurora.org \
    --to=tamizhr@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.