All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, kuba@kernel.org
Subject: [PATCH net-next 8/8] bnxt_en: allow firmware to disable VLAN offloads
Date: Mon, 29 Jun 2020 02:34:24 -0400	[thread overview]
Message-ID: <1593412464-503-9-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1593412464-503-1-git-send-email-michael.chan@broadcom.com>

From: Edwin Peer <edwin.peer@broadcom.com>

Bare-metal use cases require giving firmware and the embedded
application processor control over VLAN offloads. The driver should
not attempt to override or utilize this feature in such scenarios
since it will not work as expected.

Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 22 +++++++++++++++++++---
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |  3 +++
 2 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 4f8fc28..451e0ef 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5210,6 +5210,14 @@ static int bnxt_hwrm_vnic_qcaps(struct bnxt *bp)
 		if (flags &
 		    VNIC_QCAPS_RESP_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP)
 			bp->flags |= BNXT_FLAG_ROCE_MIRROR_CAP;
+
+		/* Older P5 fw before EXT_HW_STATS support did not set
+		 * VLAN_STRIP_CAP properly.
+		 */
+		if ((flags & VNIC_QCAPS_RESP_FLAGS_VLAN_STRIP_CAP) ||
+		    ((bp->flags & BNXT_FLAG_CHIP_P5) &&
+		     !(bp->fw_cap & BNXT_FW_CAP_EXT_HW_STATS_SUPPORTED)))
+			bp->fw_cap |= BNXT_FW_CAP_VLAN_RX_STRIP;
 		bp->max_tpa_v2 = le16_to_cpu(resp->max_aggs_supported);
 		if (bp->max_tpa_v2)
 			bp->hw_ring_stats_size =
@@ -7030,7 +7038,7 @@ static int __bnxt_hwrm_func_qcaps(struct bnxt *bp)
 	struct hwrm_func_qcaps_input req = {0};
 	struct hwrm_func_qcaps_output *resp = bp->hwrm_cmd_resp_addr;
 	struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
-	u32 flags;
+	u32 flags, flags_ext;
 
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_QCAPS, -1, -1);
 	req.fid = cpu_to_le16(0xffff);
@@ -7055,6 +7063,12 @@ static int __bnxt_hwrm_func_qcaps(struct bnxt *bp)
 		bp->fw_cap |= BNXT_FW_CAP_ERROR_RECOVERY;
 	if (flags & FUNC_QCAPS_RESP_FLAGS_ERR_RECOVER_RELOAD)
 		bp->fw_cap |= BNXT_FW_CAP_ERR_RECOVER_RELOAD;
+	if (!(flags & FUNC_QCAPS_RESP_FLAGS_VLAN_ACCELERATION_TX_DISABLED))
+		bp->fw_cap |= BNXT_FW_CAP_VLAN_TX_INSERT;
+
+	flags_ext = le32_to_cpu(resp->flags_ext);
+	if (flags_ext & FUNC_QCAPS_RESP_FLAGS_EXT_EXT_HW_STATS_SUPPORTED)
+		bp->fw_cap |= BNXT_FW_CAP_EXT_HW_STATS_SUPPORTED;
 
 	bp->tx_push_thresh = 0;
 	if ((flags & FUNC_QCAPS_RESP_FLAGS_PUSH_MODE_SUPPORTED) &&
@@ -12033,8 +12047,10 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM |
 				    NETIF_F_GSO_GRE_CSUM;
 	dev->vlan_features = dev->hw_features | NETIF_F_HIGHDMA;
-	dev->hw_features |= BNXT_HW_FEATURE_VLAN_ALL_RX |
-			    BNXT_HW_FEATURE_VLAN_ALL_TX;
+	if (bp->fw_cap & BNXT_FW_CAP_VLAN_RX_STRIP)
+		dev->hw_features |= BNXT_HW_FEATURE_VLAN_ALL_RX;
+	if (bp->fw_cap & BNXT_FW_CAP_VLAN_TX_INSERT)
+		dev->hw_features |= BNXT_HW_FEATURE_VLAN_ALL_TX;
 	if (BNXT_SUPPORTS_TPA(bp))
 		dev->hw_features |= NETIF_F_GRO_HW;
 	dev->features |= dev->hw_features | NETIF_F_HIGHDMA;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 13c4064..d556e56 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1716,6 +1716,9 @@ struct bnxt {
 	#define BNXT_FW_CAP_ERR_RECOVER_RELOAD		0x00100000
 	#define BNXT_FW_CAP_HOT_RESET			0x00200000
 	#define BNXT_FW_CAP_SHARED_PORT_CFG		0x00400000
+	#define BNXT_FW_CAP_VLAN_RX_STRIP		0x01000000
+	#define BNXT_FW_CAP_VLAN_TX_INSERT		0x02000000
+	#define BNXT_FW_CAP_EXT_HW_STATS_SUPPORTED	0x04000000
 
 #define BNXT_NEW_RM(bp)		((bp)->fw_cap & BNXT_FW_CAP_NEW_RM)
 	u32			hwrm_spec_code;
-- 
1.8.3.1


      parent reply	other threads:[~2020-06-29 20:43 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-29  6:34 [PATCH net-next 0/8] bnxt_en: Driver update for net-next Michael Chan
2020-06-29  6:34 ` [PATCH net-next 1/8] bnxt_en: Set up the chip specific RSS table size Michael Chan
2020-06-29  6:34 ` [PATCH net-next 2/8] bnxt_en: Add logical RSS indirection table structure Michael Chan
2020-06-29 23:53   ` Jakub Kicinski
2020-06-29  6:34 ` [PATCH net-next 3/8] bnxt_en: Add helper function to return the number of RSS contexts Michael Chan
2020-06-29  6:34 ` [PATCH net-next 4/8] bnxt_en: Fill HW RSS table from the RSS logical indirection table Michael Chan
2020-06-29 23:58   ` Jakub Kicinski
2020-06-30  0:42     ` Michael Chan
2020-06-29  6:34 ` [PATCH net-next 5/8] bnxt_en: Return correct RSS indirection table entries to ethtool -x Michael Chan
2020-06-29  6:34 ` [PATCH net-next 6/8] bnxt_en: Implement ethtool -X to set indirection table Michael Chan
2020-06-30  0:06   ` Jakub Kicinski
2020-06-30  0:38     ` Michael Chan
2020-06-30 19:05       ` Jakub Kicinski
2020-06-30 19:42         ` Michael Chan
2020-06-29  6:34 ` [PATCH net-next 7/8] bnxt_en: clean up VLAN feature bit handling Michael Chan
2020-06-29  6:34 ` Michael Chan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1593412464-503-9-git-send-email-michael.chan@broadcom.com \
    --to=michael.chan@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.