From: Naresh GS <1888971@bugs.launchpad.net>
To: qemu-devel@nongnu.org
Subject: [Bug 1888971] [NEW] SMI trigger causes hang with multiple cores
Date: Sun, 26 Jul 2020 03:57:51 -0000 [thread overview]
Message-ID: <159573587135.29737.8295812528041177661.malonedeb@chaenomeles.canonical.com> (raw)
Public bug reported:
When using qemu , SMI trigger causes hang/reboot under following
conditions:
1. No KVM but there are more than 1 threads (-smp > 1)
2. When using KVM.
Info:
qemu-system-x86_64 --version
QEMU emulator version 2.11.1(Debian 1:2.11+dfsg-1ubuntu7.29)
Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers
SMI trigger was done by writing 0x00 in IO port 0xB2.
Command:
No failure in SMI trigger when using the below command:
qemu-system-x86_64 -M pc-q35-bionic -smp 1 -bios build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee 1.txt
Hang/resets with below commands:
qemu-system-x86_64 -M pc-q35-bionic -smp 2 -bios build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee 1.txt
sudo qemu-system-x86_64 -M pc-q35-bionic,accel=kvm -smp 1 -bios
build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee 1.txt
** Affects: qemu
Importance: Undecided
Status: New
** Description changed:
- When using qemu , SMI trigger causes hand/reboot under following
+ When using qemu , SMI trigger causes hang/reboot under following
conditions:
1. No KVM but there are more than 1 threads (-smp > 1)
2. When using KVM.
Info:
qemu-system-x86_64 --version
QEMU emulator version 2.11.1(Debian 1:2.11+dfsg-1ubuntu7.29)
Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers
SMI trigger was done by writing 0x00 in IO port 0xB2.
** Description changed:
When using qemu , SMI trigger causes hang/reboot under following
conditions:
1. No KVM but there are more than 1 threads (-smp > 1)
2. When using KVM.
Info:
qemu-system-x86_64 --version
QEMU emulator version 2.11.1(Debian 1:2.11+dfsg-1ubuntu7.29)
Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers
SMI trigger was done by writing 0x00 in IO port 0xB2.
+
+ Command:
+ No failure in SMI trigger when using the below command:
+ qemu-system-x86_64 -M pc-q35-bionic -smp 1 -bios build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee 1.txt
+
+ Hang/resets with below commands:
+ qemu-system-x86_64 -M pc-q35-bionic -smp 2 -bios build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee 1.txt
+
+ sudo qemu-system-x86_64 -M pc-q35-bionic,accel=kvm -smp 1 -bios
+ build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee 1.txt
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1888971
Title:
SMI trigger causes hang with multiple cores
Status in QEMU:
New
Bug description:
When using qemu , SMI trigger causes hang/reboot under following
conditions:
1. No KVM but there are more than 1 threads (-smp > 1)
2. When using KVM.
Info:
qemu-system-x86_64 --version
QEMU emulator version 2.11.1(Debian 1:2.11+dfsg-1ubuntu7.29)
Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers
SMI trigger was done by writing 0x00 in IO port 0xB2.
Command:
No failure in SMI trigger when using the below command:
qemu-system-x86_64 -M pc-q35-bionic -smp 1 -bios build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee 1.txt
Hang/resets with below commands:
qemu-system-x86_64 -M pc-q35-bionic -smp 2 -bios build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee 1.txt
sudo qemu-system-x86_64 -M pc-q35-bionic,accel=kvm -smp 1 -bios
build/coreboot.rom -serial stdio -hda ../linux.img -m 2048 | tee
1.txt
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1888971/+subscriptions
next reply other threads:[~2020-07-26 4:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-26 3:57 Naresh GS [this message]
2020-07-27 10:27 ` [Bug 1888971] Re: SMI trigger causes hang with multiple cores Laszlo Ersek (Red Hat)
2020-07-31 6:32 ` Naresh GS
2020-07-31 9:44 ` Laszlo Ersek (Red Hat)
2020-08-12 11:35 ` Laszlo Ersek (Red Hat)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=159573587135.29737.8295812528041177661.malonedeb@chaenomeles.canonical.com \
--to=1888971@bugs.launchpad.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.