* [PATCH] ath10k: move enable_pll_clk call to ath10k_core_start()
@ 2020-08-14 16:15 ` Kalle Valo
0 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2020-08-14 16:15 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
There's no reason to have call for enable_pll_clk in ath10k_bmi_start(), move
it to ath10k_core_start() instead. This way it's possible to call
ath10k_bmi_start() from sdio.c during firmware dump creation. And also the
function call is more visible when it's in core.c.
No functional changes, compile tested only.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/bmi.c | 8 --------
drivers/net/wireless/ath/ath10k/core.c | 7 +++++++
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
index 5b6db6e66f65..8b9d537c8900 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -12,17 +12,9 @@
void ath10k_bmi_start(struct ath10k *ar)
{
- int ret;
-
ath10k_dbg(ar, ATH10K_DBG_BMI, "bmi start\n");
ar->bmi.done_sent = false;
-
- /* Enable hardware clock to speed up firmware download */
- if (ar->hw_params.hw_ops->enable_pll_clk) {
- ret = ar->hw_params.hw_ops->enable_pll_clk(ar);
- ath10k_dbg(ar, ATH10K_DBG_BMI, "bmi enable pll ret %d\n", ret);
- }
}
int ath10k_bmi_done(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 22b6937ac225..029ae1c4d8dc 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2614,6 +2614,13 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
ar->running_fw->fw_file.fw_features)) {
ath10k_bmi_start(ar);
+ /* Enable hardware clock to speed up firmware download */
+ if (ar->hw_params.hw_ops->enable_pll_clk) {
+ status = ar->hw_params.hw_ops->enable_pll_clk(ar);
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot enable pll ret %d\n",
+ status);
+ }
+
if (ath10k_init_configure_target(ar)) {
status = -EINVAL;
goto err;
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ath10k: move enable_pll_clk call to ath10k_core_start()
@ 2020-08-14 16:15 ` Kalle Valo
0 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2020-08-14 16:15 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
There's no reason to have call for enable_pll_clk in ath10k_bmi_start(), move
it to ath10k_core_start() instead. This way it's possible to call
ath10k_bmi_start() from sdio.c during firmware dump creation. And also the
function call is more visible when it's in core.c.
No functional changes, compile tested only.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/bmi.c | 8 --------
drivers/net/wireless/ath/ath10k/core.c | 7 +++++++
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
index 5b6db6e66f65..8b9d537c8900 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -12,17 +12,9 @@
void ath10k_bmi_start(struct ath10k *ar)
{
- int ret;
-
ath10k_dbg(ar, ATH10K_DBG_BMI, "bmi start\n");
ar->bmi.done_sent = false;
-
- /* Enable hardware clock to speed up firmware download */
- if (ar->hw_params.hw_ops->enable_pll_clk) {
- ret = ar->hw_params.hw_ops->enable_pll_clk(ar);
- ath10k_dbg(ar, ATH10K_DBG_BMI, "bmi enable pll ret %d\n", ret);
- }
}
int ath10k_bmi_done(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 22b6937ac225..029ae1c4d8dc 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2614,6 +2614,13 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
ar->running_fw->fw_file.fw_features)) {
ath10k_bmi_start(ar);
+ /* Enable hardware clock to speed up firmware download */
+ if (ar->hw_params.hw_ops->enable_pll_clk) {
+ status = ar->hw_params.hw_ops->enable_pll_clk(ar);
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot enable pll ret %d\n",
+ status);
+ }
+
if (ath10k_init_configure_target(ar)) {
status = -EINVAL;
goto err;
--
2.7.4
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ath10k: move enable_pll_clk call to ath10k_core_start()
2020-08-14 16:15 ` Kalle Valo
(?)
@ 2020-08-18 9:42 ` Kalle Valo
-1 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2020-08-18 9:42 UTC (permalink / raw)
To: Kalle Valo; +Cc: linux-wireless, ath10k
Kalle Valo <kvalo@codeaurora.org> wrote:
> There's no reason to have call for enable_pll_clk in ath10k_bmi_start(), move
> it to ath10k_core_start() instead. This way it's possible to call
> ath10k_bmi_start() from sdio.c during firmware dump creation. And also the
> function call is more visible when it's in core.c.
>
> No functional changes, compile tested only.
>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Patch applied to ath-next branch of ath.git, thanks.
ad0dc0426468 ath10k: move enable_pll_clk call to ath10k_core_start()
--
https://patchwork.kernel.org/patch/11714755/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ath10k: move enable_pll_clk call to ath10k_core_start()
2020-08-14 16:15 ` Kalle Valo
(?)
(?)
@ 2020-08-18 9:42 ` Kalle Valo
-1 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2020-08-18 9:42 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k, linux-wireless
Kalle Valo <kvalo@codeaurora.org> wrote:
> There's no reason to have call for enable_pll_clk in ath10k_bmi_start(), move
> it to ath10k_core_start() instead. This way it's possible to call
> ath10k_bmi_start() from sdio.c during firmware dump creation. And also the
> function call is more visible when it's in core.c.
>
> No functional changes, compile tested only.
>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Patch applied to ath-next branch of ath.git, thanks.
ad0dc0426468 ath10k: move enable_pll_clk call to ath10k_core_start()
--
https://patchwork.kernel.org/patch/11714755/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-08-18 9:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-14 16:15 [PATCH] ath10k: move enable_pll_clk call to ath10k_core_start() Kalle Valo
2020-08-14 16:15 ` Kalle Valo
2020-08-18 9:42 ` Kalle Valo
2020-08-18 9:42 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.