All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: <axboe@kernel.dk>, <jejb@linux.ibm.com>,
	<martin.petersen@oracle.com>, <don.brace@microsemi.com>,
	<kashyap.desai@broadcom.com>, <ming.lei@redhat.com>,
	<bvanassche@acm.org>, <dgilbert@interlog.com>,
	<paolo.valente@linaro.org>, <hare@suse.de>, <hch@lst.de>
Cc: <sumit.saxena@broadcom.com>, <linux-block@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
	<esc.storagedev@microsemi.com>, <megaraidlinux.pdl@broadcom.com>,
	<chenxiang66@hisilicon.com>, <luojiaxing@huawei.com>,
	John Garry <john.garry@huawei.com>
Subject: [PATCH v8 16/18] hpsa: enable host_tagset and switch to MQ
Date: Wed, 19 Aug 2020 23:20:34 +0800	[thread overview]
Message-ID: <1597850436-116171-17-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1597850436-116171-1-git-send-email-john.garry@huawei.com>

From: Hannes Reinecke <hare@suse.de>

The smart array HBAs can steer interrupt completion, so this
patch switches the implementation to use multiqueue and enables
'host_tagset' as the HBA has a shared host-wide tagset.

Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hpsa.c | 44 +++++++-------------------------------------
 drivers/scsi/hpsa.h |  1 -
 2 files changed, 7 insertions(+), 38 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 91794a50b31f..eaddcd3e9caf 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -984,6 +984,7 @@ static struct scsi_host_template hpsa_driver_template = {
 	.shost_attrs = hpsa_shost_attrs,
 	.max_sectors = 2048,
 	.no_write_same = 1,
+	.host_tagset = 1,
 };
 
 static inline u32 next_command(struct ctlr_info *h, u8 q)
@@ -1148,12 +1149,14 @@ static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h,
 static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
 	struct CommandList *c, int reply_queue)
 {
+	u32 blk_tag = blk_mq_unique_tag(c->scsi_cmd->request);
+
 	dial_down_lockup_detection_during_fw_flash(h, c);
 	atomic_inc(&h->commands_outstanding);
 	if (c->device)
 		atomic_inc(&c->device->commands_outstanding);
 
-	reply_queue = h->reply_map[raw_smp_processor_id()];
+	reply_queue = blk_mq_unique_tag_to_hwq(blk_tag);
 	switch (c->cmd_type) {
 	case CMD_IOACCEL1:
 		set_ioaccel1_performant_mode(h, c, reply_queue);
@@ -5676,8 +5679,6 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	/* Get the ptr to our adapter structure out of cmd->host. */
 	h = sdev_to_hba(cmd->device);
 
-	BUG_ON(cmd->request->tag < 0);
-
 	dev = cmd->device->hostdata;
 	if (!dev) {
 		cmd->result = DID_NO_CONNECT << 16;
@@ -5853,7 +5854,7 @@ static int hpsa_scsi_host_alloc(struct ctlr_info *h)
 	sh->hostdata[0] = (unsigned long) h;
 	sh->irq = pci_irq_vector(h->pdev, 0);
 	sh->unique_id = sh->irq;
-
+	sh->nr_hw_queues = h->msix_vectors > 0 ? h->msix_vectors : 1;
 	h->scsi_host = sh;
 	return 0;
 }
@@ -5879,7 +5880,8 @@ static int hpsa_scsi_add_host(struct ctlr_info *h)
  */
 static int hpsa_get_cmd_index(struct scsi_cmnd *scmd)
 {
-	int idx = scmd->request->tag;
+	u32 blk_tag = blk_mq_unique_tag(scmd->request);
+	int idx = blk_mq_unique_tag_to_tag(blk_tag);
 
 	if (idx < 0)
 		return idx;
@@ -7456,26 +7458,6 @@ static void hpsa_disable_interrupt_mode(struct ctlr_info *h)
 	h->msix_vectors = 0;
 }
 
-static void hpsa_setup_reply_map(struct ctlr_info *h)
-{
-	const struct cpumask *mask;
-	unsigned int queue, cpu;
-
-	for (queue = 0; queue < h->msix_vectors; queue++) {
-		mask = pci_irq_get_affinity(h->pdev, queue);
-		if (!mask)
-			goto fallback;
-
-		for_each_cpu(cpu, mask)
-			h->reply_map[cpu] = queue;
-	}
-	return;
-
-fallback:
-	for_each_possible_cpu(cpu)
-		h->reply_map[cpu] = 0;
-}
-
 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
  * controllers that are capable. If not, we use legacy INTx mode.
  */
@@ -7872,9 +7854,6 @@ static int hpsa_pci_init(struct ctlr_info *h)
 	if (err)
 		goto clean1;
 
-	/* setup mapping between CPU and reply queue */
-	hpsa_setup_reply_map(h);
-
 	err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
 	if (err)
 		goto clean2;	/* intmode+region, pci */
@@ -8613,7 +8592,6 @@ static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h,
 
 static void hpda_free_ctlr_info(struct ctlr_info *h)
 {
-	kfree(h->reply_map);
 	kfree(h);
 }
 
@@ -8622,14 +8600,6 @@ static struct ctlr_info *hpda_alloc_ctlr_info(void)
 	struct ctlr_info *h;
 
 	h = kzalloc(sizeof(*h), GFP_KERNEL);
-	if (!h)
-		return NULL;
-
-	h->reply_map = kcalloc(nr_cpu_ids, sizeof(*h->reply_map), GFP_KERNEL);
-	if (!h->reply_map) {
-		kfree(h);
-		return NULL;
-	}
 	return h;
 }
 
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 6b87d9815b35..9c6a161f2367 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -161,7 +161,6 @@ struct bmic_controller_parameters {
 #pragma pack()
 
 struct ctlr_info {
-	unsigned int *reply_map;
 	int	ctlr;
 	char	devname[8];
 	char    *product_name;
-- 
2.26.2


  parent reply	other threads:[~2020-08-19 15:27 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 15:20 [PATCH v8 00/18] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs John Garry
2020-08-19 15:20 ` [PATCH v8 01/18] blk-mq: Rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHARED John Garry
2020-08-19 15:20 ` [PATCH v8 02/18] blk-mq: Rename blk_mq_update_tag_set_depth() John Garry
2020-08-19 15:20 ` [PATCH v8 03/18] blk-mq: Free tags in blk_mq_init_tags() upon error John Garry
2020-08-19 15:20 ` [PATCH v8 04/18] blk-mq: Pass flags for tag init/free John Garry
2020-08-19 15:20 ` [PATCH v8 05/18] blk-mq: Use pointers for blk_mq_tags bitmap tags John Garry
2020-08-19 15:20 ` [PATCH v8 06/18] blk-mq: Facilitate a shared sbitmap per tagset John Garry
2020-08-19 15:20 ` [PATCH v8 07/18] blk-mq: Relocate hctx_may_queue() John Garry
2020-08-19 15:20 ` [PATCH v8 08/18] blk-mq: Record nr_active_requests per queue for when using shared sbitmap John Garry
2020-08-19 15:20 ` [PATCH v8 09/18] blk-mq: Record active_queues_shared_sbitmap per tag_set " John Garry
2020-08-19 15:20 ` [PATCH v8 10/18] blk-mq, elevator: Count requests per hctx to improve performance John Garry
2020-08-19 15:20 ` [PATCH v8 11/18] null_blk: Support shared tag bitmap John Garry
2020-08-19 15:20 ` [PATCH v8 12/18] scsi: Add host and host template flag 'host_tagset' John Garry
2020-08-19 15:20 ` [PATCH v8 13/18] scsi: core: Show nr_hw_queues in sysfs John Garry
2020-09-10  8:33   ` John Garry
2020-08-19 15:20 ` [PATCH v8 14/18] scsi: hisi_sas: Switch v3 hw to MQ John Garry
2020-08-19 15:20 ` [PATCH v8 15/18] scsi: scsi_debug: Support host tagset John Garry
2020-08-19 15:20 ` John Garry [this message]
2020-08-19 15:20 ` [PATCH v8 17/18] scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug John Garry
2020-11-02 14:17   ` Qian Cai
2020-11-02 14:31     ` Kashyap Desai
2020-11-02 15:24       ` Qian Cai
2020-11-02 14:51     ` John Garry
2020-11-02 15:18       ` Qian Cai
2020-11-03 10:54         ` John Garry
2020-11-03 13:04           ` Qian Cai
2020-11-04 15:21             ` Qian Cai
2020-11-04 16:07               ` Kashyap Desai
2020-11-04 18:08                 ` John Garry
2020-11-06 19:25                   ` Sumit Saxena
2020-11-07  0:17                     ` Qian Cai
2020-11-09  8:49                       ` John Garry
2020-11-09 13:39                         ` Qian Cai
2020-11-09 14:05                           ` John Garry
2020-11-10 17:42                             ` John Garry
2020-11-11  7:27                               ` Sumit Saxena
2020-11-11  9:27                                 ` Ming Lei
2020-11-11 11:36                                   ` Sumit Saxena
2020-11-11 14:42                                   ` Qian Cai
2020-11-11 15:04                                     ` Ming Lei
2020-11-11 11:51                                 ` John Garry
2020-08-19 15:20 ` [PATCH v8 18/18] smartpqi: enable host tagset John Garry
2020-08-27  8:53 ` [PATCH v8 00/18] blk-mq/scsi: Provide hostwide shared tags for SCSI HBAs John Garry
2020-09-03 19:28 ` Douglas Gilbert
2020-09-03 21:23 ` Jens Axboe
2020-09-04  9:09   ` John Garry
2020-09-04 12:44     ` Martin K. Petersen
2020-09-16  7:21       ` John Garry
2020-09-17  1:10         ` Martin K. Petersen
2020-09-17  6:48           ` John Garry
2020-09-21 21:35             ` Don.Brace
2020-09-21 22:15               ` John Garry
2020-09-22  9:03                 ` John Garry
2020-09-28 16:11           ` Kashyap Desai
2020-10-06 14:24             ` John Garry
2020-10-06 14:42               ` Jens Axboe
2020-09-08 12:46 ` Hannes Reinecke
2020-09-08 13:38   ` John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1597850436-116171-17-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@acm.org \
    --cc=chenxiang66@hisilicon.com \
    --cc=dgilbert@interlog.com \
    --cc=don.brace@microsemi.com \
    --cc=esc.storagedev@microsemi.com \
    --cc=hare@suse.de \
    --cc=hch@lst.de \
    --cc=jejb@linux.ibm.com \
    --cc=kashyap.desai@broadcom.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=luojiaxing@huawei.com \
    --cc=martin.petersen@oracle.com \
    --cc=megaraidlinux.pdl@broadcom.com \
    --cc=ming.lei@redhat.com \
    --cc=paolo.valente@linaro.org \
    --cc=sumit.saxena@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.