All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, kuba@kernel.org,
	Edwin Peer <edwin.peer@broadcom.com>
Subject: [PATCH net 7/8] bnxt_en: init RSS table for Minimal-Static VF reservation
Date: Wed, 26 Aug 2020 01:08:38 -0400	[thread overview]
Message-ID: <1598418519-20168-8-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1598418519-20168-1-git-send-email-michael.chan@broadcom.com>

From: Edwin Peer <edwin.peer@broadcom.com>

There are no VF rings available during probe when the device is configured
using the Minimal-Static reservation strategy. In this case, the RSS
indirection table can only be initialized later, during bnxt_open_nic().
However, this was not happening because the rings will already have been
reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings()
to return false in bnxt_reserve_rings() and bypass the RSS table init.

Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into
__bnxt_reserve_rings(), which is common to both paths and is called
whenever ring configuration is changed. After doing this, the RSS table
init that must be called from bnxt_init_one() happens implicitly via
bnxt_set_default_rings(), necessitating doing the allocation earlier in
order to avoid a null pointer dereference.

Fixes: bd3191b5d87d ("bnxt_en: Implement ethtool -X to set indirection table.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index a23ccb0..27df572 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -6219,6 +6219,9 @@ static int __bnxt_reserve_rings(struct bnxt *bp)
 	if (!tx || !rx || !cp || !grp || !vnic || !stat)
 		return -ENOMEM;
 
+	if (!netif_is_rxfh_configured(bp->dev))
+		bnxt_set_dflt_rss_indir_tbl(bp);
+
 	return rc;
 }
 
@@ -8500,9 +8503,6 @@ int bnxt_reserve_rings(struct bnxt *bp, bool irq_re_init)
 			rc = bnxt_init_int_mode(bp);
 		bnxt_ulp_irq_restart(bp, rc);
 	}
-	if (!netif_is_rxfh_configured(bp->dev))
-		bnxt_set_dflt_rss_indir_tbl(bp);
-
 	if (rc) {
 		netdev_err(bp->dev, "ring reservation/IRQ init failure rc: %d\n", rc);
 		return rc;
@@ -12209,6 +12209,10 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (BNXT_CHIP_P5(bp))
 		bp->flags |= BNXT_FLAG_CHIP_P5;
 
+	rc = bnxt_alloc_rss_indir_tbl(bp);
+	if (rc)
+		goto init_err_pci_clean;
+
 	rc = bnxt_fw_init_one_p2(bp);
 	if (rc)
 		goto init_err_pci_clean;
@@ -12313,11 +12317,6 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	bp->tx_nr_rings_per_tc = bp->tx_nr_rings;
 
-	rc = bnxt_alloc_rss_indir_tbl(bp);
-	if (rc)
-		goto init_err_pci_clean;
-	bnxt_set_dflt_rss_indir_tbl(bp);
-
 	if (BNXT_PF(bp)) {
 		if (!bnxt_pf_wq) {
 			bnxt_pf_wq =
-- 
1.8.3.1


  parent reply	other threads:[~2020-08-26  5:09 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-26  5:08 [PATCH net 0/8] bnxt_en: Bug fixes Michael Chan
2020-08-26  5:08 ` [PATCH net 1/8] bnxt_en: Don't query FW when netif_running() is false Michael Chan
2020-08-26  5:08 ` [PATCH net 2/8] bnxt_en: Check for zero dir entries in NVRAM Michael Chan
2020-08-26  5:08 ` [PATCH net 3/8] bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled Michael Chan
2020-08-26  5:08 ` [PATCH net 4/8] bnxt_en: Fix PCI AER error recovery flow Michael Chan
2020-08-26  5:08 ` [PATCH net 5/8] bnxt_en: Fix possible crash in bnxt_fw_reset_task() Michael Chan
2020-08-26  5:08 ` [PATCH net 6/8] bnxt_en: fix HWRM error when querying VF temperature Michael Chan
2020-08-26  5:08 ` Michael Chan [this message]
2020-08-26  5:08 ` [PATCH net 8/8] bnxt_en: Setup default RSS map in all scenarios Michael Chan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1598418519-20168-8-git-send-email-michael.chan@broadcom.com \
    --to=michael.chan@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=edwin.peer@broadcom.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.