[dpdk-dev] [PATCH v9 08/10] baseband/acc100: add interrupt support to PMD

[Nicolas Chautru <nicolas.chautru@intel.com>]

Adding capability and functions to support MSI
interrupts, call backs and inforing.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <Tianjiao.liu@intel.com>
---
 drivers/baseband/acc100/rte_acc100_pmd.c | 288 ++++++++++++++++++++++++++++++-
 drivers/baseband/acc100/rte_acc100_pmd.h |  15 ++
 2 files changed, 300 insertions(+), 3 deletions(-)

diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
index 7d4c3df..b6d9e7c 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.c
+++ b/drivers/baseband/acc100/rte_acc100_pmd.c
@@ -339,6 +339,213 @@
 	free_base_addresses(base_addrs, i);
 }
 
+/*
+ * Find queue_id of a device queue based on details from the Info Ring.
+ * If a queue isn't found UINT16_MAX is returned.
+ */
+static inline uint16_t
+get_queue_id_from_ring_info(struct rte_bbdev_data *data,
+		const union acc100_info_ring_data ring_data)
+{
+	uint16_t queue_id;
+
+	for (queue_id = 0; queue_id < data->num_queues; ++queue_id) {
+		struct acc100_queue *acc100_q =
+				data->queues[queue_id].queue_private;
+		if (acc100_q != NULL && acc100_q->aq_id == ring_data.aq_id &&
+				acc100_q->qgrp_id == ring_data.qg_id &&
+				acc100_q->vf_id == ring_data.vf_id)
+			return queue_id;
+	}
+
+	return UINT16_MAX;
+}
+
+/* Checks PF Info Ring to find the interrupt cause and handles it accordingly */
+static inline void
+acc100_check_ir(struct acc100_device *acc100_dev)
+{
+	volatile union acc100_info_ring_data *ring_data;
+	uint16_t info_ring_head = acc100_dev->info_ring_head;
+	if (acc100_dev->info_ring == NULL)
+		return;
+
+	ring_data = acc100_dev->info_ring + (acc100_dev->info_ring_head &
+			ACC100_INFO_RING_MASK);
+
+	while (ring_data->valid) {
+		if ((ring_data->int_nb < ACC100_PF_INT_DMA_DL_DESC_IRQ) || (
+				ring_data->int_nb >
+				ACC100_PF_INT_DMA_DL5G_DESC_IRQ))
+			rte_bbdev_log(WARNING, "InfoRing: ITR:%d Info:0x%x",
+				ring_data->int_nb, ring_data->detailed_info);
+		/* Initialize Info Ring entry and move forward */
+		ring_data->val = 0;
+		info_ring_head++;
+		ring_data = acc100_dev->info_ring +
+				(info_ring_head & ACC100_INFO_RING_MASK);
+	}
+}
+
+/* Checks PF Info Ring to find the interrupt cause and handles it accordingly */
+static inline void
+acc100_pf_interrupt_handler(struct rte_bbdev *dev)
+{
+	struct acc100_device *acc100_dev = dev->data->dev_private;
+	volatile union acc100_info_ring_data *ring_data;
+	struct acc100_deq_intr_details deq_intr_det;
+
+	ring_data = acc100_dev->info_ring + (acc100_dev->info_ring_head &
+			ACC100_INFO_RING_MASK);
+
+	while (ring_data->valid) {
+
+		rte_bbdev_log_debug(
+				"ACC100 PF Interrupt received, Info Ring data: 0x%x",
+				ring_data->val);
+
+		switch (ring_data->int_nb) {
+		case ACC100_PF_INT_DMA_DL_DESC_IRQ:
+		case ACC100_PF_INT_DMA_UL_DESC_IRQ:
+		case ACC100_PF_INT_DMA_UL5G_DESC_IRQ:
+		case ACC100_PF_INT_DMA_DL5G_DESC_IRQ:
+			deq_intr_det.queue_id = get_queue_id_from_ring_info(
+					dev->data, *ring_data);
+			if (deq_intr_det.queue_id == UINT16_MAX) {
+				rte_bbdev_log(ERR,
+						"Couldn't find queue: aq_id: %u, qg_id: %u, vf_id: %u",
+						ring_data->aq_id,
+						ring_data->qg_id,
+						ring_data->vf_id);
+				return;
+			}
+			rte_bbdev_pmd_callback_process(dev,
+					RTE_BBDEV_EVENT_DEQUEUE, &deq_intr_det);
+			break;
+		default:
+			rte_bbdev_pmd_callback_process(dev,
+					RTE_BBDEV_EVENT_ERROR, NULL);
+			break;
+		}
+
+		/* Initialize Info Ring entry and move forward */
+		ring_data->val = 0;
+		++acc100_dev->info_ring_head;
+		ring_data = acc100_dev->info_ring +
+				(acc100_dev->info_ring_head &
+				ACC100_INFO_RING_MASK);
+	}
+}
+
+/* Checks VF Info Ring to find the interrupt cause and handles it accordingly */
+static inline void
+acc100_vf_interrupt_handler(struct rte_bbdev *dev)
+{
+	struct acc100_device *acc100_dev = dev->data->dev_private;
+	volatile union acc100_info_ring_data *ring_data;
+	struct acc100_deq_intr_details deq_intr_det;
+
+	ring_data = acc100_dev->info_ring + (acc100_dev->info_ring_head &
+			ACC100_INFO_RING_MASK);
+
+	while (ring_data->valid) {
+
+		rte_bbdev_log_debug(
+				"ACC100 VF Interrupt received, Info Ring data: 0x%x",
+				ring_data->val);
+
+		switch (ring_data->int_nb) {
+		case ACC100_VF_INT_DMA_DL_DESC_IRQ:
+		case ACC100_VF_INT_DMA_UL_DESC_IRQ:
+		case ACC100_VF_INT_DMA_UL5G_DESC_IRQ:
+		case ACC100_VF_INT_DMA_DL5G_DESC_IRQ:
+			/* VFs are not aware of their vf_id - it's set to 0 in
+			 * queue structures.
+			 */
+			ring_data->vf_id = 0;
+			deq_intr_det.queue_id = get_queue_id_from_ring_info(
+					dev->data, *ring_data);
+			if (deq_intr_det.queue_id == UINT16_MAX) {
+				rte_bbdev_log(ERR,
+						"Couldn't find queue: aq_id: %u, qg_id: %u",
+						ring_data->aq_id,
+						ring_data->qg_id);
+				return;
+			}
+			rte_bbdev_pmd_callback_process(dev,
+					RTE_BBDEV_EVENT_DEQUEUE, &deq_intr_det);
+			break;
+		default:
+			rte_bbdev_pmd_callback_process(dev,
+					RTE_BBDEV_EVENT_ERROR, NULL);
+			break;
+		}
+
+		/* Initialize Info Ring entry and move forward */
+		ring_data->valid = 0;
+		++acc100_dev->info_ring_head;
+		ring_data = acc100_dev->info_ring + (acc100_dev->info_ring_head
+				& ACC100_INFO_RING_MASK);
+	}
+}
+
+/* Interrupt handler triggered by ACC100 dev for handling specific interrupt */
+static void
+acc100_dev_interrupt_handler(void *cb_arg)
+{
+	struct rte_bbdev *dev = cb_arg;
+	struct acc100_device *acc100_dev = dev->data->dev_private;
+
+	/* Read info ring */
+	if (acc100_dev->pf_device)
+		acc100_pf_interrupt_handler(dev);
+	else
+		acc100_vf_interrupt_handler(dev);
+}
+
+/* Allocate and setup inforing */
+static int
+allocate_inforing(struct rte_bbdev *dev)
+{
+	struct acc100_device *d = dev->data->dev_private;
+	const struct acc100_registry_addr *reg_addr;
+	rte_iova_t info_ring_phys;
+	uint32_t phys_low, phys_high;
+
+	if (d->info_ring != NULL)
+		return 0; /* Already configured */
+
+	/* Choose correct registry addresses for the device type */
+	if (d->pf_device)
+		reg_addr = &pf_reg_addr;
+	else
+		reg_addr = &vf_reg_addr;
+	/* Allocate InfoRing */
+	d->info_ring = rte_zmalloc_socket("Info Ring",
+			ACC100_INFO_RING_NUM_ENTRIES *
+			sizeof(*d->info_ring), RTE_CACHE_LINE_SIZE,
+			dev->data->socket_id);
+	if (d->info_ring == NULL) {
+		rte_bbdev_log(ERR,
+				"Failed to allocate Info Ring for %s:%u",
+				dev->device->driver->name,
+				dev->data->dev_id);
+		return -ENOMEM;
+	}
+	info_ring_phys = rte_malloc_virt2iova(d->info_ring);
+
+	/* Setup Info Ring */
+	phys_high = (uint32_t)(info_ring_phys >> 32);
+	phys_low  = (uint32_t)(info_ring_phys);
+	acc100_reg_write(d, reg_addr->info_ring_hi, phys_high);
+	acc100_reg_write(d, reg_addr->info_ring_lo, phys_low);
+	acc100_reg_write(d, reg_addr->info_ring_en, ACC100_REG_IRQ_EN_ALL);
+	d->info_ring_head = (acc100_reg_read(d, reg_addr->info_ring_ptr) &
+			0xFFF) / sizeof(union acc100_info_ring_data);
+	return 0;
+}
+
+
 /* Allocate 64MB memory used for all software rings */
 static int
 acc100_setup_queues(struct rte_bbdev *dev, uint16_t num_queues, int socket_id)
@@ -426,6 +633,7 @@
 	acc100_reg_write(d, reg_addr->tail_ptrs_dl4g_hi, phys_high);
 	acc100_reg_write(d, reg_addr->tail_ptrs_dl4g_lo, phys_low);
 
+	allocate_inforing(dev);
 	d->harq_layout = rte_zmalloc_socket("HARQ Layout",
 			ACC100_HARQ_LAYOUT * sizeof(*d->harq_layout),
 			RTE_CACHE_LINE_SIZE, dev->data->socket_id);
@@ -437,13 +645,53 @@
 	return 0;
 }
 
+static int
+acc100_intr_enable(struct rte_bbdev *dev)
+{
+	int ret;
+	struct acc100_device *d = dev->data->dev_private;
+
+	/* Only MSI are currently supported */
+	if (dev->intr_handle->type == RTE_INTR_HANDLE_VFIO_MSI ||
+			dev->intr_handle->type == RTE_INTR_HANDLE_UIO) {
+
+		allocate_inforing(dev);
+
+		ret = rte_intr_enable(dev->intr_handle);
+		if (ret < 0) {
+			rte_bbdev_log(ERR,
+					"Couldn't enable interrupts for device: %s",
+					dev->data->name);
+			rte_free(d->info_ring);
+			return ret;
+		}
+		ret = rte_intr_callback_register(dev->intr_handle,
+				acc100_dev_interrupt_handler, dev);
+		if (ret < 0) {
+			rte_bbdev_log(ERR,
+					"Couldn't register interrupt callback for device: %s",
+					dev->data->name);
+			rte_free(d->info_ring);
+			return ret;
+		}
+
+		return 0;
+	}
+
+	rte_bbdev_log(ERR, "ACC100 (%s) supports only VFIO MSI interrupts",
+			dev->data->name);
+	return -ENOTSUP;
+}
+
 /* Free 64MB memory used for software rings */
 static int
 acc100_dev_close(struct rte_bbdev *dev)
 {
 	struct acc100_device *d = dev->data->dev_private;
+	acc100_check_ir(d);
 	if (d->sw_rings_base != NULL) {
 		rte_free(d->tail_ptrs);
+		rte_free(d->info_ring);
 		rte_free(d->sw_rings_base);
 		d->sw_rings_base = NULL;
 	}
@@ -643,6 +891,7 @@
 					RTE_BBDEV_TURBO_CRC_TYPE_24B |
 					RTE_BBDEV_TURBO_HALF_ITERATION_EVEN |
 					RTE_BBDEV_TURBO_EARLY_TERMINATION |
+					RTE_BBDEV_TURBO_DEC_INTERRUPTS |
 					RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN |
 					RTE_BBDEV_TURBO_MAP_DEC |
 					RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP |
@@ -663,6 +912,7 @@
 					RTE_BBDEV_TURBO_CRC_24B_ATTACH |
 					RTE_BBDEV_TURBO_RV_INDEX_BYPASS |
 					RTE_BBDEV_TURBO_RATE_MATCH |
+					RTE_BBDEV_TURBO_ENC_INTERRUPTS |
 					RTE_BBDEV_TURBO_ENC_SCATTER_GATHER,
 				.num_buffers_src =
 						RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
@@ -676,7 +926,8 @@
 				.capability_flags =
 					RTE_BBDEV_LDPC_RATE_MATCH |
 					RTE_BBDEV_LDPC_CRC_24B_ATTACH |
-					RTE_BBDEV_LDPC_INTERLEAVER_BYPASS,
+					RTE_BBDEV_LDPC_INTERLEAVER_BYPASS |
+					RTE_BBDEV_LDPC_ENC_INTERRUPTS,
 				.num_buffers_src =
 						RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
 				.num_buffers_dst =
@@ -701,7 +952,8 @@
 				RTE_BBDEV_LDPC_DECODE_BYPASS |
 				RTE_BBDEV_LDPC_DEC_SCATTER_GATHER |
 				RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION |
-				RTE_BBDEV_LDPC_LLR_COMPRESSION,
+				RTE_BBDEV_LDPC_LLR_COMPRESSION |
+				RTE_BBDEV_LDPC_DEC_INTERRUPTS,
 			.llr_size = 8,
 			.llr_decimals = 1,
 			.num_buffers_src =
@@ -751,14 +1003,39 @@
 #else
 	dev_info->harq_buffer_size = 0;
 #endif
+	acc100_check_ir(d);
+}
+
+static int
+acc100_queue_intr_enable(struct rte_bbdev *dev, uint16_t queue_id)
+{
+	struct acc100_queue *q = dev->data->queues[queue_id].queue_private;
+
+	if (dev->intr_handle->type != RTE_INTR_HANDLE_VFIO_MSI &&
+			dev->intr_handle->type != RTE_INTR_HANDLE_UIO)
+		return -ENOTSUP;
+
+	q->irq_enable = 1;
+	return 0;
+}
+
+static int
+acc100_queue_intr_disable(struct rte_bbdev *dev, uint16_t queue_id)
+{
+	struct acc100_queue *q = dev->data->queues[queue_id].queue_private;
+	q->irq_enable = 0;
+	return 0;
 }
 
 static const struct rte_bbdev_ops acc100_bbdev_ops = {
 	.setup_queues = acc100_setup_queues,
+	.intr_enable = acc100_intr_enable,
 	.close = acc100_dev_close,
 	.info_get = acc100_dev_info_get,
 	.queue_setup = acc100_queue_setup,
 	.queue_release = acc100_queue_release,
+	.queue_intr_enable = acc100_queue_intr_enable,
+	.queue_intr_disable = acc100_queue_intr_disable
 };
 
 /* ACC100 PCI PF address map */
@@ -3018,8 +3295,10 @@
 			? (1 << RTE_BBDEV_DATA_ERROR) : 0);
 	op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
 	op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
-	if (op->status != 0)
+	if (op->status != 0) {
 		q_data->queue_stats.dequeue_err_count++;
+		acc100_check_ir(q->d);
+	}
 
 	/* CRC invalid if error exists */
 	if (!op->status)
@@ -3076,6 +3355,9 @@
 		op->status |= 1 << RTE_BBDEV_SYNDROME_ERROR;
 	op->ldpc_dec.iter_count = (uint8_t) rsp.iter_cnt;
 
+	if (op->status & (1 << RTE_BBDEV_DRV_ERROR))
+		acc100_check_ir(q->d);
+
 	/* Check if this is the last desc in batch (Atomic Queue) */
 	if (desc->req.last_desc_in_batch) {
 		(*aq_dequeued)++;
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.h b/drivers/baseband/acc100/rte_acc100_pmd.h
index 78686c1..8980fa5 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.h
+++ b/drivers/baseband/acc100/rte_acc100_pmd.h
@@ -559,7 +559,14 @@ struct acc100_device {
 	/* Virtual address of the info memory routed to the this function under
 	 * operation, whether it is PF or VF.
 	 */
+	union acc100_info_ring_data *info_ring;
+
 	union acc100_harq_layout_data *harq_layout;
+	/* Virtual Info Ring head */
+	uint16_t info_ring_head;
+	/* Number of bytes available for each queue in device, depending on
+	 * how many queues are enabled with configure()
+	 */
 	uint32_t sw_ring_size;
 	uint32_t ddr_size; /* Size in kB */
 	uint32_t *tail_ptrs; /* Base address of response tail pointer buffer */
@@ -575,4 +582,12 @@ struct acc100_device {
 	bool configured; /**< True if this ACC100 device is configured */
 };
 
+/**
+ * Structure with details about RTE_BBDEV_EVENT_DEQUEUE event. It's passed to
+ * the callback function.
+ */
+struct acc100_deq_intr_details {
+	uint16_t queue_id;
+};
+
 #endif /* _RTE_ACC100_PMD_H_ */
-- 
1.8.3.1