* [PATCH 07/18] configs: mtmips: refresh for mt7628 based boards
@ 2020-10-16 7:35 Weijie Gao
2020-10-19 11:01 ` Stefan Roese
0 siblings, 1 reply; 2+ messages in thread
From: Weijie Gao @ 2020-10-16 7:35 UTC (permalink / raw)
To: u-boot
Since mt7620 is added into Kconfig, the CONFIG_SOC_MT7628=y which is
omitted by default must be added back, otherwise make xxx_defconfig for
these boards will be configured for mt7620 platform.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---
configs/gardena-smart-gateway-mt7688_defconfig | 1 +
configs/linkit-smart-7688_defconfig | 1 +
configs/mt7628_rfb_defconfig | 1 +
configs/vocore2_defconfig | 1 +
4 files changed, 4 insertions(+)
diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
index 001a66d0f6..c03123f6e4 100644
--- a/configs/gardena-smart-gateway-mt7688_defconfig
+++ b/configs/gardena-smart-gateway-mt7688_defconfig
@@ -12,6 +12,7 @@ CONFIG_SPL=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_ENV_OFFSET_REDUND=0xB0000
CONFIG_ARCH_MTMIPS=y
+CONFIG_SOC_MT7628=y
CONFIG_DEFAULT_DEVICE_TREE="gardena-smart-gateway-mt7688"
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig
index 437000b4c7..dd2524e4ec 100644
--- a/configs/linkit-smart-7688_defconfig
+++ b/configs/linkit-smart-7688_defconfig
@@ -9,6 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
CONFIG_SPL=y
CONFIG_ARCH_MTMIPS=y
+CONFIG_SOC_MT7628=y
CONFIG_BOARD_LINKIT_SMART_7688=y
CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
diff --git a/configs/mt7628_rfb_defconfig b/configs/mt7628_rfb_defconfig
index 69025728b2..831e54e9f3 100644
--- a/configs/mt7628_rfb_defconfig
+++ b/configs/mt7628_rfb_defconfig
@@ -9,6 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
CONFIG_SPL=y
CONFIG_ARCH_MTMIPS=y
+CONFIG_SOC_MT7628=y
CONFIG_BOARD_MT7628_RFB=y
CONFIG_DEFAULT_DEVICE_TREE="mediatek,mt7628-rfb"
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
diff --git a/configs/vocore2_defconfig b/configs/vocore2_defconfig
index acb9abf1be..e255829366 100644
--- a/configs/vocore2_defconfig
+++ b/configs/vocore2_defconfig
@@ -10,6 +10,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
CONFIG_SPL=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_ARCH_MTMIPS=y
+CONFIG_SOC_MT7628=y
CONFIG_BOARD_VOCORE2=y
CONFIG_DEFAULT_DEVICE_TREE="vocore_vocore2"
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 07/18] configs: mtmips: refresh for mt7628 based boards
2020-10-16 7:35 [PATCH 07/18] configs: mtmips: refresh for mt7628 based boards Weijie Gao
@ 2020-10-19 11:01 ` Stefan Roese
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Roese @ 2020-10-19 11:01 UTC (permalink / raw)
To: u-boot
On 16.10.20 09:35, Weijie Gao wrote:
> Since mt7620 is added into Kconfig, the CONFIG_SOC_MT7628=y which is
> omitted by default must be added back, otherwise make xxx_defconfig for
> these boards will be configured for mt7620 platform.
>
> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> ---
> configs/gardena-smart-gateway-mt7688_defconfig | 1 +
> configs/linkit-smart-7688_defconfig | 1 +
> configs/mt7628_rfb_defconfig | 1 +
> configs/vocore2_defconfig | 1 +
> 4 files changed, 4 insertions(+)
>
> diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
> index 001a66d0f6..c03123f6e4 100644
> --- a/configs/gardena-smart-gateway-mt7688_defconfig
> +++ b/configs/gardena-smart-gateway-mt7688_defconfig
> @@ -12,6 +12,7 @@ CONFIG_SPL=y
> CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
> CONFIG_ENV_OFFSET_REDUND=0xB0000
> CONFIG_ARCH_MTMIPS=y
> +CONFIG_SOC_MT7628=y
> CONFIG_DEFAULT_DEVICE_TREE="gardena-smart-gateway-mt7688"
> CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
> # CONFIG_MIPS_BOOT_ENV_LEGACY is not set
> diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig
> index 437000b4c7..dd2524e4ec 100644
> --- a/configs/linkit-smart-7688_defconfig
> +++ b/configs/linkit-smart-7688_defconfig
> @@ -9,6 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
> CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
> CONFIG_SPL=y
> CONFIG_ARCH_MTMIPS=y
> +CONFIG_SOC_MT7628=y
> CONFIG_BOARD_LINKIT_SMART_7688=y
> CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
> CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
> diff --git a/configs/mt7628_rfb_defconfig b/configs/mt7628_rfb_defconfig
> index 69025728b2..831e54e9f3 100644
> --- a/configs/mt7628_rfb_defconfig
> +++ b/configs/mt7628_rfb_defconfig
> @@ -9,6 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
> CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
> CONFIG_SPL=y
> CONFIG_ARCH_MTMIPS=y
> +CONFIG_SOC_MT7628=y
> CONFIG_BOARD_MT7628_RFB=y
> CONFIG_DEFAULT_DEVICE_TREE="mediatek,mt7628-rfb"
> CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
> diff --git a/configs/vocore2_defconfig b/configs/vocore2_defconfig
> index acb9abf1be..e255829366 100644
> --- a/configs/vocore2_defconfig
> +++ b/configs/vocore2_defconfig
> @@ -10,6 +10,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
> CONFIG_SPL=y
> CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
> CONFIG_ARCH_MTMIPS=y
> +CONFIG_SOC_MT7628=y
> CONFIG_BOARD_VOCORE2=y
> CONFIG_DEFAULT_DEVICE_TREE="vocore_vocore2"
> CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
>
Viele Gr??e,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-10-19 11:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-16 7:35 [PATCH 07/18] configs: mtmips: refresh for mt7628 based boards Weijie Gao
2020-10-19 11:01 ` Stefan Roese
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.