[PATCH net v2 2/2] net: mvpp2: disable force link UP during port init procedure

[<stefanc@marvell.com>]

From: Stefan Chulski <stefanc@marvell.com>

Force link UP can be enabled by bootloader during tftpboot
and breaks NFS support.
Force link UP disabled during port init procedure.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index d2b0506..0ad3177 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5479,7 +5479,7 @@ static int mvpp2_port_init(struct mvpp2_port *port)
 	struct mvpp2 *priv = port->priv;
 	struct mvpp2_txq_pcpu *txq_pcpu;
 	unsigned int thread;
-	int queue, err;
+	int queue, err, val;
 
 	/* Checks for hardware constraints */
 	if (port->first_rxq + port->nrxqs >
@@ -5493,6 +5493,18 @@ static int mvpp2_port_init(struct mvpp2_port *port)
 	mvpp2_egress_disable(port);
 	mvpp2_port_disable(port);
 
+	if (mvpp2_is_xlg(port->phy_interface)) {
+		val = readl(port->base + MVPP22_XLG_CTRL0_REG);
+		val &= ~MVPP22_XLG_CTRL0_FORCE_LINK_PASS;
+		val |= MVPP22_XLG_CTRL0_FORCE_LINK_DOWN;
+		writel(val, port->base + MVPP22_XLG_CTRL0_REG);
+	} else {
+		val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
+		val &= ~MVPP2_GMAC_FORCE_LINK_PASS;
+		val |= MVPP2_GMAC_FORCE_LINK_DOWN;
+		writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG);
+	}
+
 	port->tx_time_coal = MVPP2_TXDONE_COAL_USEC;
 
 	port->txqs = devm_kcalloc(dev, port->ntxqs, sizeof(*port->txqs),
-- 
1.9.1