All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shiri Kuzin <shirik@nvidia.com>
To: dev@dpdk.org
Cc: viacheslavo@nvidia.com, adrien.mazarguil@6wind.com,
	orika@nvidia.com, ferruh.yigit@intel.com, thomas@monjalon.net,
	rasland@nvidia.com
Subject: [dpdk-dev] [PATCH 2/8] app/testpmd: add GENEVE option item support
Date: Sun, 27 Dec 2020 18:06:17 +0200	[thread overview]
Message-ID: <1609085183-25229-3-git-send-email-shirik@nvidia.com> (raw)
In-Reply-To: <1609085183-25229-1-git-send-email-shirik@nvidia.com>

From: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

The patch adds the GENEVE option rte flow item support to
command line interpreter. The flow command with GENEVE
option items looks like:

  flow create 0 ingress pattern eth / ipv4 / udp / geneve vni is 100 /
       geneve-opt class is 99 length is 1 type is 0 data is 0x669988 /
       end actions drop / end

The option length should be specified in 32-bit words, this
value specifies the length of the data pattern/mask arrays (should be
multiplied by sizeof(uint32_t) to be expressed in bytes. If match
on the length itself is not needed the mask should be set to zero, in
this case length is used to specify the pattern/mask array lengths only.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
 app/test-pmd/cmdline_flow.c                 | 102 ++++++++++++++++++++++++++--
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   8 +++
 2 files changed, 104 insertions(+), 6 deletions(-)

diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 585cab9..8bb2cb1 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -283,6 +283,11 @@ enum index {
 	ITEM_ECPRI_MSG_IQ_DATA_PCID,
 	ITEM_ECPRI_MSG_RTC_CTRL_RTCID,
 	ITEM_ECPRI_MSG_DLY_MSR_MSRID,
+	ITEM_GENEVE_OPT,
+	ITEM_GENEVE_OPT_CLASS,
+	ITEM_GENEVE_OPT_TYPE,
+	ITEM_GENEVE_OPT_LENGTH,
+	ITEM_GENEVE_OPT_DATA,
 
 	/* Validate/create actions. */
 	ACTIONS,
@@ -413,6 +418,9 @@ enum index {
 /** Maximum size for pattern in struct rte_flow_item_raw. */
 #define ITEM_RAW_PATTERN_SIZE 40
 
+/** Maximum size for GENEVE option data pattern in bytes. */
+#define ITEM_GENEVE_OPT_DATA_SIZE 124
+
 /** Storage size for struct rte_flow_item_raw including pattern. */
 #define ITEM_RAW_SIZE \
 	(sizeof(struct rte_flow_item_raw) + ITEM_RAW_PATTERN_SIZE)
@@ -428,7 +436,7 @@ struct action_rss_data {
 };
 
 /** Maximum data size in struct rte_flow_action_raw_encap. */
-#define ACTION_RAW_ENCAP_MAX_DATA 128
+#define ACTION_RAW_ENCAP_MAX_DATA 512
 #define RAW_ENCAP_CONFS_MAX_NUM 8
 
 /** Storage for struct rte_flow_action_raw_encap. */
@@ -658,6 +666,16 @@ struct token {
 		.mask = (const void *)&(const s){ .f = (1 << (b)) - 1 }, \
 	})
 
+/** Static initializer for ARGS() to target a field with limits. */
+#define ARGS_ENTRY_BOUNDED(s, f, i, a) \
+	(&(const struct arg){ \
+		.bounded = 1, \
+		.min = (i), \
+		.max = (a), \
+		.offset = offsetof(s, f), \
+		.size = sizeof(((s *)0)->f), \
+	})
+
 /** Static initializer for ARGS() to target an arbitrary bit-mask. */
 #define ARGS_ENTRY_MASK(s, f, m) \
 	(&(const struct arg){ \
@@ -903,6 +921,7 @@ struct parse_action_priv {
 	ITEM_AH,
 	ITEM_PFCP,
 	ITEM_ECPRI,
+	ITEM_GENEVE_OPT,
 	END_SET,
 	ZERO,
 };
@@ -1244,6 +1263,15 @@ struct parse_action_priv {
 	ZERO,
 };
 
+static const enum index item_geneve_opt[] = {
+	ITEM_GENEVE_OPT_CLASS,
+	ITEM_GENEVE_OPT_TYPE,
+	ITEM_GENEVE_OPT_LENGTH,
+	ITEM_GENEVE_OPT_DATA,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index next_action[] = {
 	ACTION_END,
 	ACTION_VOID,
@@ -3230,6 +3258,47 @@ static int comp_set_sample_index(struct context *, const struct token *,
 		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_ecpri,
 				hdr.type5.msr_id)),
 	},
+	[ITEM_GENEVE_OPT] = {
+		.name = "geneve-opt",
+		.help = "GENEVE header option",
+		.priv = PRIV_ITEM(GENEVE_OPT,
+				  sizeof(struct rte_flow_item_geneve_opt) +
+				  ITEM_GENEVE_OPT_DATA_SIZE),
+		.next = NEXT(item_geneve_opt),
+		.call = parse_vc,
+	},
+	[ITEM_GENEVE_OPT_CLASS]	= {
+		.name = "class",
+		.help = "GENEVE option class",
+		.next = NEXT(item_geneve_opt, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_geneve_opt,
+					     option_class)),
+	},
+	[ITEM_GENEVE_OPT_TYPE] = {
+		.name = "type",
+		.help = "GENEVE option type",
+		.next = NEXT(item_geneve_opt, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_geneve_opt,
+					option_type)),
+	},
+	[ITEM_GENEVE_OPT_LENGTH] = {
+		.name = "length",
+		.help = "GENEVE option data length (in 32b words)",
+		.next = NEXT(item_geneve_opt, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_BOUNDED(
+				struct rte_flow_item_geneve_opt, option_len,
+				0, 31)),
+	},
+	[ITEM_GENEVE_OPT_DATA] = {
+		.name = "data",
+		.help = "GENEVE option data pattern",
+		.next = NEXT(item_geneve_opt, NEXT_ENTRY(HEX), item_param),
+		.args = ARGS(ARGS_ENTRY(struct rte_flow_item_geneve_opt, data),
+			     ARGS_ENTRY_ARB(0, 0),
+			     ARGS_ENTRY_ARB
+				(sizeof(struct rte_flow_item_geneve_opt),
+				ITEM_GENEVE_OPT_DATA_SIZE)),
+	},
 	/* Validate/create actions. */
 	[ACTIONS] = {
 		.name = "actions",
@@ -6482,11 +6551,14 @@ static int comp_set_sample_index(struct context *, const struct token *,
 	ret = snprintf(tmp, sizeof(tmp), "%u", hexlen);
 	if (ret < 0)
 		goto error;
-	push_args(ctx, arg_len);
-	ret = parse_int(ctx, token, tmp, ret, NULL, 0);
-	if (ret < 0) {
-		pop_args(ctx);
-		goto error;
+	/* Save length if requested. */
+	if (arg_len->size) {
+		push_args(ctx, arg_len);
+		ret = parse_int(ctx, token, tmp, ret, NULL, 0);
+		if (ret < 0) {
+			pop_args(ctx);
+			goto error;
+		}
 	}
 	buf = (uint8_t *)ctx->object + arg_data->offset;
 	/* Output buffer is not necessarily NUL-terminated. */
@@ -7486,6 +7558,9 @@ static int comp_set_sample_index(struct context *, const struct token *,
 	case RTE_FLOW_ITEM_TYPE_GENEVE:
 		mask = &rte_flow_item_geneve_mask;
 		break;
+	case RTE_FLOW_ITEM_TYPE_GENEVE_OPT:
+		mask = &rte_flow_item_geneve_opt_mask;
+		break;
 	case RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID:
 		mask = &rte_flow_item_pppoe_proto_id_mask;
 		break;
@@ -7598,6 +7673,8 @@ static int comp_set_sample_index(struct context *, const struct token *,
 	/* process hdr from upper layer to low layer (L3/L4 -> L2). */
 	data_tail = data + ACTION_RAW_ENCAP_MAX_DATA;
 	for (i = n - 1 ; i >= 0; --i) {
+		const struct rte_flow_item_geneve_opt *opt;
+
 		item = in->args.vc.pattern + i;
 		if (item->spec == NULL)
 			item->spec = flow_item_default_mask(item);
@@ -7650,6 +7727,19 @@ static int comp_set_sample_index(struct context *, const struct token *,
 		case RTE_FLOW_ITEM_TYPE_GENEVE:
 			size = sizeof(struct rte_geneve_hdr);
 			break;
+		case RTE_FLOW_ITEM_TYPE_GENEVE_OPT:
+			opt = (const struct rte_flow_item_geneve_opt *)
+								item->spec;
+			size = sizeof(struct rte_flow_item_geneve_opt) -
+			       sizeof(opt->data);
+			if (opt->option_len && opt->data) {
+				*total_size += opt->option_len *
+					       sizeof(uint32_t);
+				rte_memcpy(data_tail - (*total_size),
+					   opt->data,
+					   opt->option_len * sizeof(uint32_t));
+			}
+			break;
 		case RTE_FLOW_ITEM_TYPE_L2TPV3OIP:
 			size = sizeof(rte_be32_t);
 			proto = 0x73;
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 9be4500..37278d3 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3680,6 +3680,14 @@ This section lists supported pattern items and their attributes, if any.
   - ``vni {unsigned}``: virtual network identifier.
   - ``protocol {unsigned}``: protocol type.
 
+- ``geneve-opt``: match GENEVE header option.
+
+  - ``class {unsigned}``: GENEVE option class.
+  - ``type {unsigned}``: GENEVE option type.
+  - ``length {unsigned}``: GENEVE option length in 32-bit words.
+  - ``data {hex string}``: GENEVE option data, the legnt is defined by
+    ``length`` field
+
 - ``vxlan-gpe``: match VXLAN-GPE header.
 
   - ``vni {unsigned}``: VXLAN-GPE identifier.
-- 
1.8.3.1


  parent reply	other threads:[~2020-12-27 16:07 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-27 16:06 [dpdk-dev] [PATCH 0/8] ethdev: introduce GENEVE header TLV option item Shiri Kuzin
2020-12-27 16:06 ` [dpdk-dev] [PATCH 1/8] lib/librte_ethdev: " Shiri Kuzin
2020-12-27 17:25   ` Stephen Hemminger
2020-12-29 10:12     ` Ori Kam
2020-12-30  8:22       ` Shiri Kuzin
2020-12-27 16:06 ` Shiri Kuzin [this message]
2020-12-27 16:06 ` [dpdk-dev] [PATCH 3/8] common/mlx5: check GENEVE TLV support in HCA attributes Shiri Kuzin
2020-12-27 16:06 ` [dpdk-dev] [PATCH 4/8] common/mlx5: create GENEVE TLV option object with DevX Shiri Kuzin
2020-12-27 16:06 ` [dpdk-dev] [PATCH 5/8] net/mlx5: create GENEVE TLV option management Shiri Kuzin
2020-12-27 16:06 ` [dpdk-dev] [PATCH 6/8] net/mlx5: add GENEVE TLV option flow validation Shiri Kuzin
2020-12-27 16:06 ` [dpdk-dev] [PATCH 7/8] net/mlx5: add GENEVE TLV option flow translation Shiri Kuzin
2020-12-27 16:06 ` [dpdk-dev] [PATCH 8/8] doc: update GENEVE TLV option support Shiri Kuzin
2021-01-05 17:53 ` [dpdk-dev] [PATCH v2 0/8] ethdev: introduce GENEVE header TLV option item Shiri Kuzin
2021-01-05 17:53   ` [dpdk-dev] [PATCH v2 1/8] lib/librte_ethdev: " Shiri Kuzin
2021-01-05 17:53   ` [dpdk-dev] [PATCH v2 2/8] app/testpmd: add GENEVE option item support Shiri Kuzin
2021-01-05 17:53   ` [dpdk-dev] [PATCH v2 3/8] common/mlx5: check GENEVE TLV support in HCA attributes Shiri Kuzin
2021-01-06  9:23     ` Slava Ovsiienko
2021-01-05 17:53   ` [dpdk-dev] [PATCH v2 4/8] common/mlx5: create GENEVE TLV option object with DevX Shiri Kuzin
2021-01-06  9:24     ` Slava Ovsiienko
2021-01-05 17:53   ` [dpdk-dev] [PATCH v2 5/8] net/mlx5: create GENEVE TLV option management Shiri Kuzin
2021-01-06  9:24     ` Slava Ovsiienko
2021-01-05 17:53   ` [dpdk-dev] [PATCH v2 6/8] net/mlx5: add GENEVE TLV option flow validation Shiri Kuzin
2021-01-06  9:24     ` Slava Ovsiienko
2021-01-05 17:53   ` [dpdk-dev] [PATCH v2 7/8] net/mlx5: add GENEVE TLV option flow translation Shiri Kuzin
2021-01-06  9:25     ` Slava Ovsiienko
2021-01-05 17:53   ` [dpdk-dev] [PATCH v2 8/8] doc: update GENEVE TLV option support Shiri Kuzin
2021-01-06  9:26     ` Slava Ovsiienko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1609085183-25229-3-git-send-email-shirik@nvidia.com \
    --to=shirik@nvidia.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=orika@nvidia.com \
    --cc=rasland@nvidia.com \
    --cc=thomas@monjalon.net \
    --cc=viacheslavo@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.