All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ziqi Chen <ziqichen@codeaurora.org>
To: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
	cang@codeaurora.org, hongwus@codeaurora.org,
	rnayak@codeaurora.org, vinholikatti@gmail.com,
	jejb@linux.vnet.ibm.com, martin.petersen@oracle.com,
	linux-scsi@vger.kernel.org, kernel-team@android.com,
	saravanak@google.com, salyzyn@google.com,
	ziqichen@codeaurora.org, kwmad.kim@samsung.com,
	stanley.chu@mediatek.com
Cc: Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	Bean Huo <beanhuo@micron.com>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v5 1/2] scsi: ufs: Fix ufs clk specs violation
Date: Fri,  8 Jan 2021 15:28:03 +0800	[thread overview]
Message-ID: <1610090885-50099-2-git-send-email-ziqichen@codeaurora.org> (raw)
In-Reply-To: <1610090885-50099-1-git-send-email-ziqichen@codeaurora.org>

As per specs, e.g, JESD220E chapter 7.2, while powering
off/on the ufs device, REF_CLK signal should be between
VSS(Ground) and VCCQ/VCCQ2.

Signed-off-by: Ziqi Chen <ziqichen@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e221add..3f807f7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8686,8 +8686,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	if (ret)
 		goto set_dev_active;
 
-	ufshcd_vreg_set_lpm(hba);
-
 disable_clks:
 	/*
 	 * Call vendor specific suspend callback. As these callbacks may access
@@ -8711,6 +8709,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 					hba->clk_gating.state);
 	}
 
+	ufshcd_vreg_set_lpm(hba);
+
 	/* Put the host controller in low power mode if possible */
 	ufshcd_hba_vreg_set_lpm(hba);
 	goto out;
@@ -8778,18 +8778,18 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	old_link_state = hba->uic_link_state;
 
 	ufshcd_hba_vreg_set_hpm(hba);
+	ret = ufshcd_vreg_set_hpm(hba);
+	if (ret)
+		goto out;
+
 	/* Make sure clocks are enabled before accessing controller */
 	ret = ufshcd_setup_clocks(hba, true);
 	if (ret)
-		goto out;
+		goto disable_vreg;
 
 	/* enable the host irq as host controller would be active soon */
 	ufshcd_enable_irq(hba);
 
-	ret = ufshcd_vreg_set_hpm(hba);
-	if (ret)
-		goto disable_irq_and_vops_clks;
-
 	/*
 	 * Call vendor specific resume callback. As these callbacks may access
 	 * vendor specific host controller register space call them when the
@@ -8797,7 +8797,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	 */
 	ret = ufshcd_vops_resume(hba, pm_op);
 	if (ret)
-		goto disable_vreg;
+		goto disable_irq_and_vops_clks;
 
 	/* For DeepSleep, the only supported option is to have the link off */
 	WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) && !ufshcd_is_link_off(hba));
@@ -8864,8 +8864,6 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	ufshcd_link_state_transition(hba, old_link_state, 0);
 vendor_suspend:
 	ufshcd_vops_suspend(hba, pm_op);
-disable_vreg:
-	ufshcd_vreg_set_lpm(hba);
 disable_irq_and_vops_clks:
 	ufshcd_disable_irq(hba);
 	if (hba->clk_scaling.is_allowed)
@@ -8876,6 +8874,8 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		trace_ufshcd_clk_gating(dev_name(hba->dev),
 					hba->clk_gating.state);
 	}
+disable_vreg:
+	ufshcd_vreg_set_lpm(hba);
 out:
 	hba->pm_op_in_progress = 0;
 	if (ret)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  reply	other threads:[~2021-01-08  7:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-08  7:28 [PATCH v5 0/2] Two changes to fix ufs power down/on specs violation Ziqi Chen
2021-01-08  7:28 ` Ziqi Chen [this message]
2021-01-08  8:23   ` [PATCH v5 1/2] scsi: ufs: Fix ufs clk " Can Guo
2021-01-08  7:28 ` [PATCH v5 2/2] scsi: ufs-qcom: Fix ufs RST_n " Ziqi Chen
2021-01-08  8:05   ` Can Guo
2021-01-08  8:15     ` ziqichen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1610090885-50099-2-git-send-email-ziqichen@codeaurora.org \
    --to=ziqichen@codeaurora.org \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=cang@codeaurora.org \
    --cc=hongwus@codeaurora.org \
    --cc=jejb@linux.ibm.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=kernel-team@android.com \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=nguyenb@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=salyzyn@google.com \
    --cc=saravanak@google.com \
    --cc=stanley.chu@mediatek.com \
    --cc=vinholikatti@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.