All of lore.kernel.org
 help / color / mirror / Atom feed
* [RESEND PATCH v4 0/8] Updates to MHI channel handling
@ 2021-01-08 20:39 Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 1/8] bus: mhi: core: Allow sending the STOP channel command Bhaumik Bhatt
                   ` (7 more replies)
  0 siblings, 8 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

MHI specification shows a state machine with support for STOP channel command
and the validity of certain state transitions. MHI host currently does not
provide any mechanism to stop a channel and restart it without resetting it.
There are also times when the device moves on to a different execution
environment while client drivers on the host are unaware of it and still
attempt to reset the channels facing unnecessary timeouts.

This series addresses the above areas to provide support for stopping an MHI
channel, resuming it back, improved documentation and improving upon channel
state machine handling in general.

This set of patches was tested on arm64 architecture.

v4:
-Updated commit text/descriptions and addressed checkpatch checks
-Added context validity check before starting/stopping channels from new API
-Added patch to clear channel context configuration after reset/unprepare

v3:
-Updated documentation for channel transfer APIs to highlight differences
-Create separate patch for "allowing channel to be disabled from stopped state"

v2:
-Renamed the newly introduced APIs to mhi_start_transfer() / mhi_stop_transfer()
-Added improved documentation to avoid confusion with the new APIs
-Removed the __ prefix from mhi_unprepare_channel() API for consistency.

Bhaumik Bhatt (8):
  bus: mhi: core: Allow sending the STOP channel command
  bus: mhi: core: Allow channel to be disabled from stopped state
  bus: mhi: core: Improvements to the channel handling state machine
  bus: mhi: core: Clear configuration from channel context during reset
  bus: mhi: core: Add support to stop or start channel data transfers
  bus: mhi: core: Check channel execution environment before issuing
    reset
  bus: mhi: core: Remove __ prefix for MHI channel unprepare function
  bus: mhi: Improve documentation on channel transfer setup APIs

 drivers/bus/mhi/core/init.c     |  22 +++-
 drivers/bus/mhi/core/internal.h |  12 ++
 drivers/bus/mhi/core/main.c     | 238 ++++++++++++++++++++++++++++------------
 include/linux/mhi.h             |  45 +++++++-
 4 files changed, 242 insertions(+), 75 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [RESEND PATCH v4 1/8] bus: mhi: core: Allow sending the STOP channel command
  2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
@ 2021-01-08 20:39 ` Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 2/8] bus: mhi: core: Allow channel to be disabled from stopped state Bhaumik Bhatt
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

Add support to allow sending the STOP channel command. If a
client driver would like to STOP a channel and have the device
retain the channel context instead of issuing a RESET to it and
clearing the context, this would provide support for it after
the ability to send this command is exposed to clients.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 8576b0f..c22d7df 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -1224,6 +1224,11 @@ int mhi_send_cmd(struct mhi_controller *mhi_cntrl,
 		cmd_tre->dword[0] = MHI_TRE_CMD_RESET_DWORD0;
 		cmd_tre->dword[1] = MHI_TRE_CMD_RESET_DWORD1(chan);
 		break;
+	case MHI_CMD_STOP_CHAN:
+		cmd_tre->ptr = MHI_TRE_CMD_STOP_PTR;
+		cmd_tre->dword[0] = MHI_TRE_CMD_STOP_DWORD0;
+		cmd_tre->dword[1] = MHI_TRE_CMD_STOP_DWORD1(chan);
+		break;
 	case MHI_CMD_START_CHAN:
 		cmd_tre->ptr = MHI_TRE_CMD_START_PTR;
 		cmd_tre->dword[0] = MHI_TRE_CMD_START_DWORD0;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [RESEND PATCH v4 2/8] bus: mhi: core: Allow channel to be disabled from stopped state
  2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 1/8] bus: mhi: core: Allow sending the STOP channel command Bhaumik Bhatt
@ 2021-01-08 20:39 ` Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 3/8] bus: mhi: core: Improvements to the channel handling state machine Bhaumik Bhatt
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

If a channel was explicitly stopped but not reset, allow it to
move to a disabled state so that the channel context can be
cleaned up after a driver remove is issued. Since the channel
remained in stopped state, its context on the device is not
cleared. Allow this move if a client driver module is unloaded
or a device crash occurs.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index aa575d3..03c5786 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -1293,7 +1293,8 @@ static int mhi_driver_remove(struct device *dev)
 
 		mutex_lock(&mhi_chan->mutex);
 
-		if (ch_state[dir] == MHI_CH_STATE_ENABLED &&
+		if ((ch_state[dir] == MHI_CH_STATE_ENABLED ||
+		     ch_state[dir] == MHI_CH_STATE_STOP) &&
 		    !mhi_chan->offload_ch)
 			mhi_deinit_chan_ctxt(mhi_cntrl, mhi_chan);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [RESEND PATCH v4 3/8] bus: mhi: core: Improvements to the channel handling state machine
  2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 1/8] bus: mhi: core: Allow sending the STOP channel command Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 2/8] bus: mhi: core: Allow channel to be disabled from stopped state Bhaumik Bhatt
@ 2021-01-08 20:39 ` Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 4/8] bus: mhi: core: Clear configuration from channel context during reset Bhaumik Bhatt
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

Improve the channel handling state machine such that all commands
go through a common function and validation process to ensure
that the state machine is not violated in any way and adheres to
the MHI specification.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/init.c     |   6 ++
 drivers/bus/mhi/core/internal.h |  12 +++
 drivers/bus/mhi/core/main.c     | 166 +++++++++++++++++++++++-----------------
 3 files changed, 114 insertions(+), 70 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 03c5786..482b365 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -54,6 +54,12 @@ const char * const mhi_state_str[MHI_STATE_MAX] = {
 	[MHI_STATE_SYS_ERR] = "SYS_ERR",
 };
 
+const char * const mhi_ch_state_type_str[MHI_CH_STATE_TYPE_MAX] = {
+	[MHI_CH_STATE_TYPE_RESET] = "RESET",
+	[MHI_CH_STATE_TYPE_STOP] = "STOP",
+	[MHI_CH_STATE_TYPE_START] = "START",
+};
+
 static const char * const mhi_pm_state_str[] = {
 	[MHI_PM_STATE_DISABLE] = "DISABLE",
 	[MHI_PM_STATE_POR] = "POR",
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 6f80ec3..7e3aac1 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -369,6 +369,18 @@ enum mhi_ch_state {
 	MHI_CH_STATE_ERROR = 0x5,
 };
 
+enum mhi_ch_state_type {
+	MHI_CH_STATE_TYPE_RESET,
+	MHI_CH_STATE_TYPE_STOP,
+	MHI_CH_STATE_TYPE_START,
+	MHI_CH_STATE_TYPE_MAX,
+};
+
+extern const char * const mhi_ch_state_type_str[MHI_CH_STATE_TYPE_MAX];
+#define TO_CH_STATE_TYPE_STR(state) (((state) >= MHI_CH_STATE_TYPE_MAX) ? \
+				     "INVALID_STATE" : \
+				     mhi_ch_state_type_str[(state)])
+
 #define MHI_INVALID_BRSTMODE(mode) (mode != MHI_DB_BRST_DISABLE && \
 				    mode != MHI_DB_BRST_ENABLE)
 
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index c22d7df..081fdf0 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -1250,56 +1250,118 @@ int mhi_send_cmd(struct mhi_controller *mhi_cntrl,
 	return 0;
 }
 
-static void __mhi_unprepare_channel(struct mhi_controller *mhi_cntrl,
-				    struct mhi_chan *mhi_chan)
+static int mhi_update_channel_state(struct mhi_controller *mhi_cntrl,
+				    struct mhi_chan *mhi_chan,
+				    enum mhi_ch_state_type to_state)
 {
-	int ret;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	enum mhi_cmd_type cmd = MHI_CMD_NOP;
+	int ret = -EIO;
+
+	dev_dbg(dev, "Updating channel %s(%d) state to: %s\n", mhi_chan->name,
+		mhi_chan->chan, TO_CH_STATE_TYPE_STR(to_state));
+
+	switch (to_state) {
+	case MHI_CH_STATE_TYPE_RESET:
+		write_lock_irq(&mhi_chan->lock);
+		if (mhi_chan->ch_state != MHI_CH_STATE_STOP &&
+		    mhi_chan->ch_state != MHI_CH_STATE_ENABLED &&
+		    mhi_chan->ch_state != MHI_CH_STATE_SUSPENDED) {
+			write_unlock_irq(&mhi_chan->lock);
+			goto exit_invalid_state;
+		}
+		mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
+		write_unlock_irq(&mhi_chan->lock);
 
-	dev_dbg(dev, "Entered: unprepare channel:%d\n", mhi_chan->chan);
+		cmd = MHI_CMD_RESET_CHAN;
+		break;
+	case MHI_CH_STATE_TYPE_STOP:
+		if (mhi_chan->ch_state != MHI_CH_STATE_ENABLED)
+			goto exit_invalid_state;
 
-	/* no more processing events for this channel */
-	mutex_lock(&mhi_chan->mutex);
-	write_lock_irq(&mhi_chan->lock);
-	if (mhi_chan->ch_state != MHI_CH_STATE_ENABLED &&
-	    mhi_chan->ch_state != MHI_CH_STATE_SUSPENDED) {
-		write_unlock_irq(&mhi_chan->lock);
-		mutex_unlock(&mhi_chan->mutex);
-		return;
+		cmd = MHI_CMD_STOP_CHAN;
+		break;
+	case MHI_CH_STATE_TYPE_START:
+		if (mhi_chan->ch_state != MHI_CH_STATE_STOP &&
+		    mhi_chan->ch_state != MHI_CH_STATE_DISABLED)
+			goto exit_invalid_state;
+
+		cmd = MHI_CMD_START_CHAN;
+		break;
+	default:
+		goto exit_invalid_state;
 	}
 
-	mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
-	write_unlock_irq(&mhi_chan->lock);
+	/* bring host and device out of suspended states */
+	ret = mhi_device_get_sync(mhi_cntrl->mhi_dev);
+	if (ret)
+		return ret;
+	mhi_cntrl->runtime_get(mhi_cntrl);
 
 	reinit_completion(&mhi_chan->completion);
-	read_lock_bh(&mhi_cntrl->pm_lock);
-	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
-		read_unlock_bh(&mhi_cntrl->pm_lock);
-		goto error_invalid_state;
+	ret = mhi_send_cmd(mhi_cntrl, mhi_chan, cmd);
+	if (ret) {
+		dev_err(dev, "Failed to send %s(%d) %s command\n",
+			mhi_chan->name, mhi_chan->chan,
+			TO_CH_STATE_TYPE_STR(to_state));
+		goto exit_command_failure;
 	}
 
-	mhi_cntrl->wake_toggle(mhi_cntrl);
-	read_unlock_bh(&mhi_cntrl->pm_lock);
+	ret = wait_for_completion_timeout(&mhi_chan->completion,
+				       msecs_to_jiffies(mhi_cntrl->timeout_ms));
+	if (!ret || mhi_chan->ccs != MHI_EV_CC_SUCCESS) {
+		dev_err(dev, "Failed to receive %s(%d) %s command completion\n",
+			mhi_chan->name, mhi_chan->chan,
+			TO_CH_STATE_TYPE_STR(to_state));
+		ret = -EIO;
+		goto exit_command_failure;
+	}
 
-	mhi_cntrl->runtime_get(mhi_cntrl);
+	ret = 0;
+
+	if (to_state != MHI_CH_STATE_TYPE_RESET) {
+		write_lock_irq(&mhi_chan->lock);
+		mhi_chan->ch_state = (to_state == MHI_CH_STATE_TYPE_START) ?
+				      MHI_CH_STATE_ENABLED : MHI_CH_STATE_STOP;
+		write_unlock_irq(&mhi_chan->lock);
+	}
+
+	dev_dbg(dev, "Channel %s(%d) state change to %s successful\n",
+		mhi_chan->name, mhi_chan->chan, TO_CH_STATE_TYPE_STR(to_state));
+
+exit_command_failure:
 	mhi_cntrl->runtime_put(mhi_cntrl);
-	ret = mhi_send_cmd(mhi_cntrl, mhi_chan, MHI_CMD_RESET_CHAN);
-	if (ret)
-		goto error_invalid_state;
+	mhi_device_put(mhi_cntrl->mhi_dev);
 
-	/* even if it fails we will still reset */
-	ret = wait_for_completion_timeout(&mhi_chan->completion,
-				msecs_to_jiffies(mhi_cntrl->timeout_ms));
-	if (!ret || mhi_chan->ccs != MHI_EV_CC_SUCCESS)
-		dev_err(dev,
-			"Failed to receive cmd completion, still resetting\n");
+	return ret;
+
+exit_invalid_state:
+	dev_err(dev, "Channel %s(%d) update to %s not allowed\n",
+		mhi_chan->name, mhi_chan->chan, TO_CH_STATE_TYPE_STR(to_state));
+
+	return -EINVAL;
+}
+
+static void __mhi_unprepare_channel(struct mhi_controller *mhi_cntrl,
+				    struct mhi_chan *mhi_chan)
+{
+	int ret;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+
+	/* no more processing events for this channel */
+	mutex_lock(&mhi_chan->mutex);
+
+	ret = mhi_update_channel_state(mhi_cntrl, mhi_chan,
+				       MHI_CH_STATE_TYPE_RESET);
+	if (ret)
+		dev_err(dev, "Failed to reset channel, still resetting\n");
 
-error_invalid_state:
 	if (!mhi_chan->offload_ch) {
 		mhi_reset_chan(mhi_cntrl, mhi_chan);
 		mhi_deinit_chan_ctxt(mhi_cntrl, mhi_chan);
 	}
-	dev_dbg(dev, "chan:%d successfully resetted\n", mhi_chan->chan);
+	dev_dbg(dev, "chan:%d successfully reset\n", mhi_chan->chan);
+
 	mutex_unlock(&mhi_chan->mutex);
 }
 
@@ -1309,8 +1371,6 @@ int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
 	int ret = 0;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 
-	dev_dbg(dev, "Preparing channel: %d\n", mhi_chan->chan);
-
 	if (!(BIT(mhi_cntrl->ee) & mhi_chan->ee_mask)) {
 		dev_err(dev,
 			"Current EE: %s Required EE Mask: 0x%x for chan: %s\n",
@@ -1321,14 +1381,6 @@ int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
 
 	mutex_lock(&mhi_chan->mutex);
 
-	/* If channel is not in disable state, do not allow it to start */
-	if (mhi_chan->ch_state != MHI_CH_STATE_DISABLED) {
-		ret = -EIO;
-		dev_dbg(dev, "channel: %d is not in disabled state\n",
-			mhi_chan->chan);
-		goto error_init_chan;
-	}
-
 	/* Check of client manages channel context for offload channels */
 	if (!mhi_chan->offload_ch) {
 		ret = mhi_init_chan_ctxt(mhi_cntrl, mhi_chan);
@@ -1336,34 +1388,11 @@ int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
 			goto error_init_chan;
 	}
 
-	reinit_completion(&mhi_chan->completion);
-	read_lock_bh(&mhi_cntrl->pm_lock);
-	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
-		read_unlock_bh(&mhi_cntrl->pm_lock);
-		ret = -EIO;
-		goto error_pm_state;
-	}
-
-	mhi_cntrl->wake_toggle(mhi_cntrl);
-	read_unlock_bh(&mhi_cntrl->pm_lock);
-	mhi_cntrl->runtime_get(mhi_cntrl);
-	mhi_cntrl->runtime_put(mhi_cntrl);
-
-	ret = mhi_send_cmd(mhi_cntrl, mhi_chan, MHI_CMD_START_CHAN);
+	ret = mhi_update_channel_state(mhi_cntrl, mhi_chan,
+				       MHI_CH_STATE_TYPE_START);
 	if (ret)
 		goto error_pm_state;
 
-	ret = wait_for_completion_timeout(&mhi_chan->completion,
-				msecs_to_jiffies(mhi_cntrl->timeout_ms));
-	if (!ret || mhi_chan->ccs != MHI_EV_CC_SUCCESS) {
-		ret = -EIO;
-		goto error_pm_state;
-	}
-
-	write_lock_irq(&mhi_chan->lock);
-	mhi_chan->ch_state = MHI_CH_STATE_ENABLED;
-	write_unlock_irq(&mhi_chan->lock);
-
 	/* Pre-allocate buffer for xfer ring */
 	if (mhi_chan->pre_alloc) {
 		int nr_el = get_nr_avail_ring_elements(mhi_cntrl,
@@ -1401,9 +1430,6 @@ int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
 
 	mutex_unlock(&mhi_chan->mutex);
 
-	dev_dbg(dev, "Chan: %d successfully moved to start state\n",
-		mhi_chan->chan);
-
 	return 0;
 
 error_pm_state:
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [RESEND PATCH v4 4/8] bus: mhi: core: Clear configuration from channel context during reset
  2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
                   ` (2 preceding siblings ...)
  2021-01-08 20:39 ` [RESEND PATCH v4 3/8] bus: mhi: core: Improvements to the channel handling state machine Bhaumik Bhatt
@ 2021-01-08 20:39 ` Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 5/8] bus: mhi: core: Add support to stop or start channel data transfers Bhaumik Bhatt
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

When clearing up the channel context after client drivers are
done using channels, the configuration is currently not being
reset entirely. Ensure this is done to appropriately handle
issues where clients unaware of the context state end up calling
functions which expect a context.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/init.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 482b365..30eef19 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -558,6 +558,7 @@ void mhi_deinit_chan_ctxt(struct mhi_controller *mhi_cntrl,
 	struct mhi_ring *buf_ring;
 	struct mhi_ring *tre_ring;
 	struct mhi_chan_ctxt *chan_ctxt;
+	u32 tmp;
 
 	buf_ring = &mhi_chan->buf_ring;
 	tre_ring = &mhi_chan->tre_ring;
@@ -568,7 +569,19 @@ void mhi_deinit_chan_ctxt(struct mhi_controller *mhi_cntrl,
 	vfree(buf_ring->base);
 
 	buf_ring->base = tre_ring->base = NULL;
+	tre_ring->ctxt_wp = NULL;
 	chan_ctxt->rbase = 0;
+	chan_ctxt->rlen = 0;
+	chan_ctxt->rp = 0;
+	chan_ctxt->wp = 0;
+
+	tmp = chan_ctxt->chcfg;
+	tmp &= ~CHAN_CTX_CHSTATE_MASK;
+	tmp |= (MHI_CH_STATE_DISABLED << CHAN_CTX_CHSTATE_SHIFT);
+	chan_ctxt->chcfg = tmp;
+
+	/* Update to all cores */
+	smp_wmb();
 }
 
 int mhi_init_chan_ctxt(struct mhi_controller *mhi_cntrl,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [RESEND PATCH v4 5/8] bus: mhi: core: Add support to stop or start channel data transfers
  2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
                   ` (3 preceding siblings ...)
  2021-01-08 20:39 ` [RESEND PATCH v4 4/8] bus: mhi: core: Clear configuration from channel context during reset Bhaumik Bhatt
@ 2021-01-08 20:39 ` Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 6/8] bus: mhi: core: Check channel execution environment before issuing reset Bhaumik Bhatt
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

Some MHI client drivers may want to request a pause or halt of
data transfer activity on their channels. Support for this does
not exist and must be introduced, wherein the channel context is
not reset or cleared but only the STOP channel command is issued.
This would need to be paired with an API that allows resuming the
data transfer activity on channels by use of the START channel
command. This API assumes that the context information is already
setup. Enable this using two new APIs, mhi_start_transfer() and
mhi_stop_transfer().

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 50 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mhi.h         | 19 +++++++++++++++++
 2 files changed, 69 insertions(+)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 081fdf0..a84e6aa 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -1583,6 +1583,56 @@ void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev)
 }
 EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer);
 
+static int mhi_update_transfer_state(struct mhi_device *mhi_dev,
+				     enum mhi_ch_state_type to_state)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct mhi_chan *mhi_chan;
+	struct mhi_chan_ctxt *chan_ctxt;
+	int dir, ret;
+
+	for (dir = 0; dir < 2; dir++) {
+		mhi_chan = dir ? mhi_dev->ul_chan : mhi_dev->dl_chan;
+
+		if (!mhi_chan)
+			continue;
+
+		/*
+		 * Bail out if one of the channels fails as client will reset
+		 * both upon failure
+		 */
+		mutex_lock(&mhi_chan->mutex);
+		chan_ctxt = &mhi_cntrl->mhi_ctxt->chan_ctxt[mhi_chan->chan];
+		if (!(chan_ctxt->chcfg & CHAN_CTX_CHSTATE_MASK)) {
+			mutex_unlock(&mhi_chan->mutex);
+			dev_err(dev, "Channel %s(%u) context not initialized\n",
+				mhi_chan->name, mhi_chan->chan);
+			return -EINVAL;
+		}
+		ret = mhi_update_channel_state(mhi_cntrl, mhi_chan, to_state);
+		if (ret) {
+			mutex_unlock(&mhi_chan->mutex);
+			return ret;
+		}
+		mutex_unlock(&mhi_chan->mutex);
+	}
+
+	return 0;
+}
+
+int mhi_stop_transfer(struct mhi_device *mhi_dev)
+{
+	return mhi_update_transfer_state(mhi_dev, MHI_CH_STATE_TYPE_STOP);
+}
+EXPORT_SYMBOL_GPL(mhi_stop_transfer);
+
+int mhi_start_transfer(struct mhi_device *mhi_dev)
+{
+	return mhi_update_transfer_state(mhi_dev, MHI_CH_STATE_TYPE_START);
+}
+EXPORT_SYMBOL_GPL(mhi_start_transfer);
+
 int mhi_poll(struct mhi_device *mhi_dev, u32 budget)
 {
 	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index fe65554..b5e11ba 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -715,6 +715,25 @@ int mhi_prepare_for_transfer(struct mhi_device *mhi_dev);
 void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev);
 
 /**
+ * mhi_stop_transfer - Pauses ongoing channel activity by issuing the STOP
+ *                     channel command to both UL and DL channels. This command
+ *                     does not reset the channel context and the client drivers
+ *                     can issue mhi_start_transfer to resume activity.
+ * @mhi_dev: Device associated with the channels
+ */
+int mhi_stop_transfer(struct mhi_device *mhi_dev);
+
+/**
+ * mhi_start_transfer - Resumes channel activity by issuing the START channel
+ *                      command to both UL and DL channels. This command assumes
+ *                      the channel context is already setup and the client
+ *                      drivers can issue mhi_stop_transfer to pause activity if
+ *                      required.
+ * @mhi_dev: Device associated with the channels
+ */
+int mhi_start_transfer(struct mhi_device *mhi_dev);
+
+/**
  * mhi_poll - Poll for any available data in DL direction
  * @mhi_dev: Device associated with the channels
  * @budget: # of events to process
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [RESEND PATCH v4 6/8] bus: mhi: core: Check channel execution environment before issuing reset
  2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
                   ` (4 preceding siblings ...)
  2021-01-08 20:39 ` [RESEND PATCH v4 5/8] bus: mhi: core: Add support to stop or start channel data transfers Bhaumik Bhatt
@ 2021-01-08 20:39 ` Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 7/8] bus: mhi: core: Remove __ prefix for MHI channel unprepare function Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 8/8] bus: mhi: Improve documentation on channel transfer setup APIs Bhaumik Bhatt
  7 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

A client can attempt to unprepare certain channels for transfer even
after the execution environment they are supposed to run in has changed.
In the event that happens, the device need not be notified of the reset
and the host can proceed with clean up for the channel context and
memory allocated for it on the host as the device will no longer be able
to respond to such a request.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index a84e6aa..ec720fe 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -1351,11 +1351,24 @@ static void __mhi_unprepare_channel(struct mhi_controller *mhi_cntrl,
 	/* no more processing events for this channel */
 	mutex_lock(&mhi_chan->mutex);
 
+	if (!(BIT(mhi_cntrl->ee) & mhi_chan->ee_mask)) {
+		dev_err(dev,
+			"Current EE: %s Required EE Mask: 0x%x for chan: %s\n",
+			TO_MHI_EXEC_STR(mhi_cntrl->ee), mhi_chan->ee_mask,
+			mhi_chan->name);
+		goto exit_unprepare_channel;
+	}
+
 	ret = mhi_update_channel_state(mhi_cntrl, mhi_chan,
 				       MHI_CH_STATE_TYPE_RESET);
 	if (ret)
 		dev_err(dev, "Failed to reset channel, still resetting\n");
 
+exit_unprepare_channel:
+	write_lock_irq(&mhi_chan->lock);
+	mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
+	write_unlock_irq(&mhi_chan->lock);
+
 	if (!mhi_chan->offload_ch) {
 		mhi_reset_chan(mhi_cntrl, mhi_chan);
 		mhi_deinit_chan_ctxt(mhi_cntrl, mhi_chan);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [RESEND PATCH v4 7/8] bus: mhi: core: Remove __ prefix for MHI channel unprepare function
  2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
                   ` (5 preceding siblings ...)
  2021-01-08 20:39 ` [RESEND PATCH v4 6/8] bus: mhi: core: Check channel execution environment before issuing reset Bhaumik Bhatt
@ 2021-01-08 20:39 ` Bhaumik Bhatt
  2021-01-08 20:39 ` [RESEND PATCH v4 8/8] bus: mhi: Improve documentation on channel transfer setup APIs Bhaumik Bhatt
  7 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

The __mhi_unprepare_channel() API does not require the __ prefix.
Get rid of it and make the internal function consistent with the
other function names.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index ec720fe..8039964 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -1342,8 +1342,8 @@ static int mhi_update_channel_state(struct mhi_controller *mhi_cntrl,
 	return -EINVAL;
 }
 
-static void __mhi_unprepare_channel(struct mhi_controller *mhi_cntrl,
-				    struct mhi_chan *mhi_chan)
+static void mhi_unprepare_channel(struct mhi_controller *mhi_cntrl,
+				  struct mhi_chan *mhi_chan)
 {
 	int ret;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
@@ -1456,7 +1456,7 @@ int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
 
 error_pre_alloc:
 	mutex_unlock(&mhi_chan->mutex);
-	__mhi_unprepare_channel(mhi_cntrl, mhi_chan);
+	mhi_unprepare_channel(mhi_cntrl, mhi_chan);
 
 	return ret;
 }
@@ -1573,7 +1573,7 @@ int mhi_prepare_for_transfer(struct mhi_device *mhi_dev)
 		if (!mhi_chan)
 			continue;
 
-		__mhi_unprepare_channel(mhi_cntrl, mhi_chan);
+		mhi_unprepare_channel(mhi_cntrl, mhi_chan);
 	}
 
 	return ret;
@@ -1591,7 +1591,7 @@ void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev)
 		if (!mhi_chan)
 			continue;
 
-		__mhi_unprepare_channel(mhi_cntrl, mhi_chan);
+		mhi_unprepare_channel(mhi_cntrl, mhi_chan);
 	}
 }
 EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [RESEND PATCH v4 8/8] bus: mhi: Improve documentation on channel transfer setup APIs
  2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
                   ` (6 preceding siblings ...)
  2021-01-08 20:39 ` [RESEND PATCH v4 7/8] bus: mhi: core: Remove __ prefix for MHI channel unprepare function Bhaumik Bhatt
@ 2021-01-08 20:39 ` Bhaumik Bhatt
  7 siblings, 0 replies; 9+ messages in thread
From: Bhaumik Bhatt @ 2021-01-08 20:39 UTC (permalink / raw)
  To: manivannan.sadhasivam
  Cc: linux-arm-msm, hemantk, jhugo, linux-kernel, loic.poulain, Bhaumik Bhatt

The mhi_prepare_for_transfer() and mhi_unprepare_from_transfer()
APIs could use better explanation, especially with the addition
of two new APIs to start and stop the transfers on channels. Add
better set of information for those APIs.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 include/linux/mhi.h | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index b5e11ba..94c5075 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -703,13 +703,35 @@ int mhi_device_get_sync(struct mhi_device *mhi_dev);
 void mhi_device_put(struct mhi_device *mhi_dev);
 
 /**
- * mhi_prepare_for_transfer - Setup channel for data transfer
+ * mhi_prepare_for_transfer - Setup UL and DL channels for data transfer.
+ *                            Allocate and initialize the channel context and
+ *                            also issue the START channel command to both
+ *                            channels. Channels can be started only if both
+ *                            host and device execution environments match and
+ *                            channels are in a DISABLED state. Calling the
+ *                            mhi_start_transfer() function is not required
+ *                            afterwards as channels are already started. This
+ *                            function also initializes the channel context
+ *                            whereas mhi_start_transfer() can only be used to
+ *                            issue the start channel command once the context
+ *                            is setup.
  * @mhi_dev: Device associated with the channels
  */
 int mhi_prepare_for_transfer(struct mhi_device *mhi_dev);
 
 /**
- * mhi_unprepare_from_transfer - Unprepare the channels
+ * mhi_unprepare_from_transfer - Reset UL and DL channels for data transfer.
+ *                               Issue the RESET channel command and let the
+ *                               device clean-up the context so no incoming
+ *                               transfers are seen on the host. Free memory
+ *                               associated with the context on host. If device
+ *                               is unresponsive, only perform a host side
+ *                               clean-up. Channels can be reset only if both
+ *                               host and device execution environments match
+ *                               and channels are in an ENABLED, STOPPED or
+ *                               SUSPENDED state. Calling mhi_stop_transfer() is
+ *                               not required before calling this function as it
+ *                               will only stop transfers, not reset channels.
  * @mhi_dev: Device associated with the channels
  */
 void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply related	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-01-08 20:42 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-08 20:39 [RESEND PATCH v4 0/8] Updates to MHI channel handling Bhaumik Bhatt
2021-01-08 20:39 ` [RESEND PATCH v4 1/8] bus: mhi: core: Allow sending the STOP channel command Bhaumik Bhatt
2021-01-08 20:39 ` [RESEND PATCH v4 2/8] bus: mhi: core: Allow channel to be disabled from stopped state Bhaumik Bhatt
2021-01-08 20:39 ` [RESEND PATCH v4 3/8] bus: mhi: core: Improvements to the channel handling state machine Bhaumik Bhatt
2021-01-08 20:39 ` [RESEND PATCH v4 4/8] bus: mhi: core: Clear configuration from channel context during reset Bhaumik Bhatt
2021-01-08 20:39 ` [RESEND PATCH v4 5/8] bus: mhi: core: Add support to stop or start channel data transfers Bhaumik Bhatt
2021-01-08 20:39 ` [RESEND PATCH v4 6/8] bus: mhi: core: Check channel execution environment before issuing reset Bhaumik Bhatt
2021-01-08 20:39 ` [RESEND PATCH v4 7/8] bus: mhi: core: Remove __ prefix for MHI channel unprepare function Bhaumik Bhatt
2021-01-08 20:39 ` [RESEND PATCH v4 8/8] bus: mhi: Improve documentation on channel transfer setup APIs Bhaumik Bhatt

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.