All of lore.kernel.org
 help / color / mirror / Atom feed
From: Taniya Das <tdas@codeaurora.org>
To: "Stephen Boyd" <sboyd@kernel.org>,
	"Michael Turquette  " <mturquette@baylibre.com>
Cc: Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	Taniya Das <tdas@codeaurora.org>
Subject: [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON
Date: Wed, 20 Jan 2021 13:17:51 +0530	[thread overview]
Message-ID: <1611128871-5898-1-git-send-email-tdas@codeaurora.org> (raw)

There are intermittent GDSC power-up failures observed for titan top
gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
enabled from probe.

Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/gcc-sc7180.c | 47 ++++---------------------------------------
 1 file changed, 4 insertions(+), 43 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index b05901b..88e896a 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
  */

 #include <linux/clk-provider.h>
@@ -919,19 +919,6 @@ static struct clk_branch gcc_camera_throttle_hf_axi_clk = {
 	},
 };

-static struct clk_branch gcc_camera_xo_clk = {
-	.halt_reg = 0xb02c,
-	.halt_check = BRANCH_HALT,
-	.clkr = {
-		.enable_reg = 0xb02c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gcc_camera_xo_clk",
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gcc_ce1_ahb_clk = {
 	.halt_reg = 0x4100c,
 	.halt_check = BRANCH_HALT_VOTED,
@@ -1096,19 +1083,6 @@ static struct clk_branch gcc_disp_throttle_hf_axi_clk = {
 	},
 };

-static struct clk_branch gcc_disp_xo_clk = {
-	.halt_reg = 0xb030,
-	.halt_check = BRANCH_HALT,
-	.clkr = {
-		.enable_reg = 0xb030,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gcc_disp_xo_clk",
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gcc_gp1_clk = {
 	.halt_reg = 0x64000,
 	.halt_check = BRANCH_HALT,
@@ -2159,19 +2133,6 @@ static struct clk_branch gcc_video_throttle_axi_clk = {
 	},
 };

-static struct clk_branch gcc_video_xo_clk = {
-	.halt_reg = 0xb028,
-	.halt_check = BRANCH_HALT,
-	.clkr = {
-		.enable_reg = 0xb028,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gcc_video_xo_clk",
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gcc_mss_cfg_ahb_clk = {
 	.halt_reg = 0x8a000,
 	.halt_check = BRANCH_HALT,
@@ -2304,7 +2265,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
 	[GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
 	[GCC_CAMERA_THROTTLE_HF_AXI_CLK] = &gcc_camera_throttle_hf_axi_clk.clkr,
-	[GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
 	[GCC_CE1_AHB_CLK] = &gcc_ce1_ahb_clk.clkr,
 	[GCC_CE1_AXI_CLK] = &gcc_ce1_axi_clk.clkr,
 	[GCC_CE1_CLK] = &gcc_ce1_clk.clkr,
@@ -2317,7 +2277,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
 	[GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
 	[GCC_DISP_THROTTLE_HF_AXI_CLK] = &gcc_disp_throttle_hf_axi_clk.clkr,
-	[GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
 	[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
 	[GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
 	[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
@@ -2413,7 +2372,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GCC_VIDEO_AXI_CLK] = &gcc_video_axi_clk.clkr,
 	[GCC_VIDEO_GPLL0_DIV_CLK_SRC] = &gcc_video_gpll0_div_clk_src.clkr,
 	[GCC_VIDEO_THROTTLE_AXI_CLK] = &gcc_video_throttle_axi_clk.clkr,
-	[GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
 	[GPLL0] = &gpll0.clkr,
 	[GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
 	[GPLL6] = &gpll6.clkr,
@@ -2510,6 +2468,9 @@ static int gcc_sc7180_probe(struct platform_device *pdev)
 	regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x0b02c, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x0b028, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x0b030, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));

 	ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.


             reply	other threads:[~2021-01-20  7:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20  7:47 Taniya Das [this message]
2021-01-20  9:16 ` [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON AngeloGioacchino Del Regno
2021-01-21  2:46   ` Stephen Boyd
2021-01-20 22:40 ` Bjorn Andersson
2021-01-21  6:49   ` Taniya Das
2021-02-08 17:53 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1611128871-5898-1-git-send-email-tdas@codeaurora.org \
    --to=tdas@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.