All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
To: sboyd@kernel.org, agross@kernel.org, bjorn.andersson@linaro.org,
	david.brown@linaro.org, devicetree@vger.kernel.org,
	jassisinghbrar@gmail.com, linux-arm-msm@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-remoteproc@vger.kernel.org, mark.rutland@arm.com,
	mturquette@baylibre.com, ohad@wizery.com, robh+dt@kernel.org,
	sricharan@codeaurora.org, gokulsri@codeaurora.org
Subject: [PATCH v8 3/9] remoteproc: qcom: Add support for split q6 + m3 wlan firmware
Date: Sat, 30 Jan 2021 10:50:07 +0530	[thread overview]
Message-ID: <1611984013-10201-4-git-send-email-gokulsri@codeaurora.org> (raw)
In-Reply-To: <1611984013-10201-1-git-send-email-gokulsri@codeaurora.org>

IPQ8074 supports split firmware for q6 and m3 as well.
So add support for loading the m3 firmware before q6.
Now the drivers works fine for both split and unified
firmwares.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_wcss.c | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 4e35e5c..2ecbd73 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -139,6 +139,7 @@ struct q6v5_wcss {
 	u32 version;
 	bool requires_force_stop;
 	bool need_mem_protection;
+	const char *m3_firmware_name;
 
 	struct qcom_rproc_glink glink_subdev;
 	struct qcom_rproc_ssr ssr_subdev;
@@ -147,7 +148,8 @@ struct q6v5_wcss {
 struct wcss_data {
 	int (*init_clock)(struct q6v5_wcss *wcss);
 	int (*init_regulator)(struct q6v5_wcss *wcss);
-	const char *firmware_name;
+	const char *q6_firmware_name;
+	const char *m3_firmware_name;
 	unsigned int crash_reason_smem;
 	u32 version;
 	bool aon_reset_required;
@@ -788,8 +790,29 @@ static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, size_t len)
 static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct q6v5_wcss *wcss = rproc->priv;
+	const struct firmware *m3_fw;
 	int ret;
 
+	if (wcss->m3_firmware_name) {
+		ret = request_firmware(&m3_fw, wcss->m3_firmware_name,
+				       wcss->dev);
+		if (ret)
+			goto skip_m3;
+
+		ret = qcom_mdt_load_no_init(wcss->dev, m3_fw,
+					    wcss->m3_firmware_name, 0,
+					    wcss->mem_region, wcss->mem_phys,
+					    wcss->mem_size, &wcss->mem_reloc);
+
+		release_firmware(m3_fw);
+
+		if (ret) {
+			dev_err(wcss->dev, "can't load m3_fw.bXX\n");
+			return ret;
+		}
+	}
+
+skip_m3:
 	if (wcss->need_mem_protection)
 		ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware,
 				    WCNSS_PAS_ID, wcss->mem_region,
@@ -1068,7 +1091,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 
 	rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops,
-			    desc->firmware_name, sizeof(*wcss));
+			    desc->q6_firmware_name, sizeof(*wcss));
 	if (!rproc) {
 		dev_err(&pdev->dev, "failed to allocate rproc\n");
 		return -ENOMEM;
@@ -1081,6 +1104,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
 	wcss->version = desc->version;
 	wcss->requires_force_stop = desc->requires_force_stop;
 	wcss->need_mem_protection = desc->need_mem_protection;
+	wcss->m3_firmware_name = desc->m3_firmware_name;
 
 	ret = q6v5_wcss_init_mmio(wcss, pdev);
 	if (ret)
@@ -1145,7 +1169,8 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
 
 static const struct wcss_data wcss_ipq8074_res_init = {
 	.init_clock = ipq8074_init_clock,
-	.firmware_name = "IPQ8074/q6_fw.mdt",
+	.q6_firmware_name = "IPQ8074/q6_fw.mdt",
+	.m3_firmware_name = "IPQ8074/m3_fw.mdt",
 	.crash_reason_smem = WCSS_CRASH_REASON,
 	.aon_reset_required = true,
 	.wcss_q6_reset_required = true,
@@ -1158,7 +1183,7 @@ static const struct wcss_data wcss_qcs404_res_init = {
 	.init_clock = qcs404_init_clock,
 	.init_regulator = qcs404_init_regulator,
 	.crash_reason_smem = WCSS_CRASH_REASON,
-	.firmware_name = "wcnss.mdt",
+	.q6_firmware_name = "wcnss.mdt",
 	.version = WCSS_QCS404,
 	.aon_reset_required = false,
 	.wcss_q6_reset_required = false,
-- 
2.7.4


  parent reply	other threads:[~2021-01-30  8:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-30  5:20 [PATCH v8 0/9] remoteproc: qcom: q6v5-wcss: Add support for secure pil Gokul Sriram Palanisamy
2021-01-30  5:20 ` [PATCH v8 1/9] remoteproc: qcom: Add PRNG proxy clock Gokul Sriram Palanisamy
2021-01-30  5:20 ` [PATCH v8 2/9] remoteproc: qcom: Add secure PIL support Gokul Sriram Palanisamy
2021-03-18  2:05   ` Bjorn Andersson
2021-01-30  5:20 ` Gokul Sriram Palanisamy [this message]
2021-01-30  5:20 ` [PATCH v8 4/9] remoteproc: qcom: Add ssr subdevice identifier Gokul Sriram Palanisamy
2021-01-30  5:20 ` [PATCH v8 5/9] remoteproc: qcom: Update regmap offsets for halt register Gokul Sriram Palanisamy
2021-01-30  5:20 ` [PATCH v8 6/9] dt-bindings: clock: qcom: Add reset for WCSSAON Gokul Sriram Palanisamy
2021-01-30  5:20 ` [PATCH v8 7/9] clk: qcom: Add WCSSAON reset Gokul Sriram Palanisamy
2021-01-30  5:20 ` [PATCH v8 8/9] arm64: dts: Add support for scm on IPQ8074 SoCs Gokul Sriram Palanisamy
2021-01-30  5:20 ` [PATCH v8 9/9] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC Gokul Sriram Palanisamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1611984013-10201-4-git-send-email-gokulsri@codeaurora.org \
    --to=gokulsri@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.