From mboxrd@z Thu Jan  1 00:00:00 1970
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: Re: [PATCH/RFC v2 1/2] arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Date: Mon, 27 Mar 2017 11:48:12 +0300
Message-ID: <1612430.SNEha5n02K@avalon>
References: <1490362665-4422-1-git-send-email-geert+renesas@glider.be> <1490362665-4422-2-git-send-email-geert+renesas@glider.be>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7Bit
Return-path: <linux-renesas-soc-owner@vger.kernel.org>
In-Reply-To: <1490362665-4422-2-git-send-email-geert+renesas@glider.be>
Sender: linux-renesas-soc-owner@vger.kernel.org
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>, Wolfram Sang <wsa@sang-engineering.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
List-Id: devicetree@vger.kernel.org

Hi Geert,

Thank you for the patch.

On Friday 24 Mar 2017 14:37:44 Geert Uytterhoeven wrote:
> Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
>   - The following devices no longer exist on ES2.0, and are thus removed:
>     fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
>   - The DU <-> VSPD topology is different on ES2.0, hence remove the
>     "vsps" property from the DU node until the driver can handle this.

I think I'll need a different compatible string between ES1.x and ES2 for the 
DU. It could make sense to move the whole DU node to *-es1.dtsi. We can decide 
about that later when I'll have a DU driver prototype ready.

> Move support for the ES1.x revision of the R-Car H3 SoC into a
> separate file.  To avoid duplication, r8a7795-es1.dtsi includes
> r8a7795.dtsi, add adds/removes/overrides device nodes and properties
> where needed.
> 
> Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
> to r8a7795-es1.dtsi to preserve compatibility.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> While currently r8a7795-es1.dtsi only adds device nodes, removal of
> devices nodes and properties can be implemented using the /delete-node/
> and /delete-property/ keywords, as shown below:
> 
> 	&soc {
> 		/delete-node/ <name>@<addr>;
> 	};
> 
> 	&<name> {
> 		/delete-property/ <prop>;
> 	};
> 
> v2:
>   - Use a separate file for ES1.x instead of for ES2.0, so r8a7795.dtsi
>     always corresponds to the latest SoC revision,
>   - Add a dash between SoC part number and revision, for compatibility
>     with the BSP,
>   - Enhance the hardware description from basic support to everything
>     already supported on ES1.x (except for DU due VSP),
>   - Let r8a7795-es1.dtsi include r8a7795.dtsi.
> ---
>  arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi       | 83 +++++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts     |  4 +-
>  arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts |  4 +-
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi           | 70 +-----------------
>  4 files changed, 88 insertions(+), 73 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
> b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi new file mode 100644
> index 0000000000000000..f1646334899f08ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
> @@ -0,0 +1,83 @@
> +/*
> + * Device Tree Source for the r8a7795 ES1.x SoC
> + *
> + * Copyright (C) 2015 Renesas Electronics Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include "r8a7795.dtsi"
> +
> +&soc {
> +	xhci1: usb@ee0400000 {
> +		compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
> +		reg = <0 0xee040000 0 0xc00>;
> +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpg CPG_MOD 327>;
> +		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +		resets = <&cpg 327>;
> +		status = "disabled";
> +	};
> +
> +	fcpf2: fcp@fe952000 {
> +		compatible = "renesas,fcpf";
> +		reg = <0 0xfe952000 0 0x200>;
> +		clocks = <&cpg CPG_MOD 613>;
> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> +		resets = <&cpg 613>;
> +	};
> +
> +	vspi2: vsp@fe9c0000 {
> +		compatible = "renesas,vsp2";
> +		reg = <0 0xfe9c0000 0 0x8000>;
> +		interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpg CPG_MOD 629>;
> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> +		resets = <&cpg 629>;
> +
> +		renesas,fcp = <&fcpvi2>;
> +	};
> +
> +	fcpvi2: fcp@fe9cf000 {
> +		compatible = "renesas,fcpv";
> +		reg = <0 0xfe9cf000 0 0x200>;
> +		clocks = <&cpg CPG_MOD 609>;
> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> +		resets = <&cpg 609>;
> +	};
> +
> +	vspd3: vsp@fea38000 {
> +		compatible = "renesas,vsp2";
> +		reg = <0 0xfea38000 0 0x4000>;
> +		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpg CPG_MOD 620>;
> +		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +		resets = <&cpg 620>;
> +
> +		renesas,fcp = <&fcpvd3>;
> +	};
> +
> +	fcpvd3: fcp@fea3f000 {
> +		compatible = "renesas,fcpv";
> +		reg = <0 0xfea3f000 0 0x200>;
> +		clocks = <&cpg CPG_MOD 600>;
> +		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +		resets = <&cpg 600>;
> +	};
> +
> +	fdp1@fe948000 {
> +		compatible = "renesas,fdp1";
> +		reg = <0 0xfe948000 0 0x2400>;
> +		interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpg CPG_MOD 117>;
> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> +		resets = <&cpg 117>;
> +		renesas,fcp = <&fcpf2>;
> +	};
> +};
> +
> +&du {
> +	vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
> +};
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index
> ab352159de6572c9..60a1f4356b4b15c7 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> @@ -10,12 +10,12 @@
>   */
> 
>  /dts-v1/;
> -#include "r8a7795.dtsi"
> +#include "r8a7795-es1.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
> 
>  / {
> -	model = "Renesas H3ULCB board based on r8a7795";
> +	model = "Renesas H3ULCB board based on r8a7795 ES1.x";
>  	compatible = "renesas,h3ulcb", "renesas,r8a7795";
> 
>  	aliases {
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index
> f25241921067dcef..7758b479dd98d2e9 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> @@ -32,11 +32,11 @@
>   */
> 
>  /dts-v1/;
> -#include "r8a7795.dtsi"
> +#include "r8a7795-es1.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> 
>  / {
> -	model = "Renesas Salvator-X board based on r8a7795";
> +	model = "Renesas Salvator-X board based on r8a7795 ES1.x";
>  	compatible = "renesas,salvator-x", "renesas,r8a7795";
> 
>  	aliases {
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index
> e99d6443b3e493a4..e1caa4e14593a299 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -182,7 +182,7 @@
>  		clock-frequency = <0>;
>  	};
> 
> -	soc {
> +	soc: soc {
>  		compatible = "simple-bus";
>  		interrupt-parent = <&gic>;
> 
> @@ -1274,16 +1274,6 @@
>  			status = "disabled";
>  		};
> 
> -		xhci1: usb@ee0400000 {
> -			compatible = "renesas,xhci-r8a7795", "renesas,rcar-
gen3-xhci";
> -			reg = <0 0xee040000 0 0xc00>;
> -			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&cpg CPG_MOD 327>;
> -			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> -			resets = <&cpg 327>;
> -			status = "disabled";
> -		};
> -
>  		usb_dmac0: dma-controller@e65a0000 {
>  			compatible = "renesas,r8a7795-usb-dmac",
>  				     "renesas,usb-dmac";
> @@ -1568,14 +1558,6 @@
>  			resets = <&cpg 614>;
>  		};
> 
> -		fcpf2: fcp@fe952000 {
> -			compatible = "renesas,fcpf";
> -			reg = <0 0xfe952000 0 0x200>;
> -			clocks = <&cpg CPG_MOD 613>;
> -			power-domains = <&sysc R8A7795_PD_A3VP>;
> -			resets = <&cpg 613>;
> -		};
> -
>  		vspbd: vsp@fe960000 {
>  			compatible = "renesas,vsp2";
>  			reg = <0 0xfe960000 0 0x8000>;
> @@ -1633,25 +1615,6 @@
>  			resets = <&cpg 610>;
>  		};
> 
> -		vspi2: vsp@fe9c0000 {
> -			compatible = "renesas,vsp2";
> -			reg = <0 0xfe9c0000 0 0x8000>;
> -			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&cpg CPG_MOD 629>;
> -			power-domains = <&sysc R8A7795_PD_A3VP>;
> -			resets = <&cpg 629>;
> -
> -			renesas,fcp = <&fcpvi2>;
> -		};
> -
> -		fcpvi2: fcp@fe9cf000 {
> -			compatible = "renesas,fcpv";
> -			reg = <0 0xfe9cf000 0 0x200>;
> -			clocks = <&cpg CPG_MOD 609>;
> -			power-domains = <&sysc R8A7795_PD_A3VP>;
> -			resets = <&cpg 609>;
> -		};
> -
>  		vspd0: vsp@fea20000 {
>  			compatible = "renesas,vsp2";
>  			reg = <0 0xfea20000 0 0x4000>;
> @@ -1709,25 +1672,6 @@
>  			resets = <&cpg 601>;
>  		};
> 
> -		vspd3: vsp@fea38000 {
> -			compatible = "renesas,vsp2";
> -			reg = <0 0xfea38000 0 0x4000>;
> -			interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&cpg CPG_MOD 620>;
> -			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> -			resets = <&cpg 620>;
> -
> -			renesas,fcp = <&fcpvd3>;
> -		};
> -
> -		fcpvd3: fcp@fea3f000 {
> -			compatible = "renesas,fcpv";
> -			reg = <0 0xfea3f000 0 0x200>;
> -			clocks = <&cpg CPG_MOD 600>;
> -			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> -			resets = <&cpg 600>;
> -		};
> -
>  		fdp1@fe940000 {
>  			compatible = "renesas,fdp1";
>  			reg = <0 0xfe940000 0 0x2400>;
> @@ -1748,16 +1692,6 @@
>  			renesas,fcp = <&fcpf1>;
>  		};
> 
> -		fdp1@fe948000 {
> -			compatible = "renesas,fdp1";
> -			reg = <0 0xfe948000 0 0x2400>;
> -			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&cpg CPG_MOD 117>;
> -			power-domains = <&sysc R8A7795_PD_A3VP>;
> -			resets = <&cpg 117>;
> -			renesas,fcp = <&fcpf2>;
> -		};
> -
>  		du: display@feb00000 {
>  			compatible = "renesas,du-r8a7795";
>  			reg = <0 0xfeb00000 0 0x80000>,
> @@ -1775,8 +1709,6 @@
>  			clock-names = "du.0", "du.1", "du.2", "du.3", 
"lvds.0";
>  			status = "disabled";
> 
> -			vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
> -
>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;

-- 
Regards,

Laurent Pinchart

From mboxrd@z Thu Jan  1 00:00:00 1970
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
Date: Mon, 27 Mar 2017 11:48:12 +0300
Subject: [PATCH/RFC v2 1/2] arm64: dts: r8a7795: Add support for R-Car H3
 ES2.0
In-Reply-To: <1490362665-4422-2-git-send-email-geert+renesas@glider.be>
References: <1490362665-4422-1-git-send-email-geert+renesas@glider.be>
 <1490362665-4422-2-git-send-email-geert+renesas@glider.be>
Message-ID: <1612430.SNEha5n02K@avalon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Geert,

Thank you for the patch.

On Friday 24 Mar 2017 14:37:44 Geert Uytterhoeven wrote:
> Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
>   - The following devices no longer exist on ES2.0, and are thus removed:
>     fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
>   - The DU <-> VSPD topology is different on ES2.0, hence remove the
>     "vsps" property from the DU node until the driver can handle this.

I think I'll need a different compatible string between ES1.x and ES2 for the 
DU. It could make sense to move the whole DU node to *-es1.dtsi. We can decide 
about that later when I'll have a DU driver prototype ready.

> Move support for the ES1.x revision of the R-Car H3 SoC into a
> separate file.  To avoid duplication, r8a7795-es1.dtsi includes
> r8a7795.dtsi, add adds/removes/overrides device nodes and properties
> where needed.
> 
> Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
> to r8a7795-es1.dtsi to preserve compatibility.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> While currently r8a7795-es1.dtsi only adds device nodes, removal of
> devices nodes and properties can be implemented using the /delete-node/
> and /delete-property/ keywords, as shown below:
> 
> 	&soc {
> 		/delete-node/ <name>@<addr>;
> 	};
> 
> 	&<name> {
> 		/delete-property/ <prop>;
> 	};
> 
> v2:
>   - Use a separate file for ES1.x instead of for ES2.0, so r8a7795.dtsi
>     always corresponds to the latest SoC revision,
>   - Add a dash between SoC part number and revision, for compatibility
>     with the BSP,
>   - Enhance the hardware description from basic support to everything
>     already supported on ES1.x (except for DU due VSP),
>   - Let r8a7795-es1.dtsi include r8a7795.dtsi.
> ---
>  arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi       | 83 +++++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts     |  4 +-
>  arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts |  4 +-
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi           | 70 +-----------------
>  4 files changed, 88 insertions(+), 73 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
> b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi new file mode 100644
> index 0000000000000000..f1646334899f08ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
> @@ -0,0 +1,83 @@
> +/*
> + * Device Tree Source for the r8a7795 ES1.x SoC
> + *
> + * Copyright (C) 2015 Renesas Electronics Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include "r8a7795.dtsi"
> +
> +&soc {
> +	xhci1: usb at ee0400000 {
> +		compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
> +		reg = <0 0xee040000 0 0xc00>;
> +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpg CPG_MOD 327>;
> +		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +		resets = <&cpg 327>;
> +		status = "disabled";
> +	};
> +
> +	fcpf2: fcp at fe952000 {
> +		compatible = "renesas,fcpf";
> +		reg = <0 0xfe952000 0 0x200>;
> +		clocks = <&cpg CPG_MOD 613>;
> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> +		resets = <&cpg 613>;
> +	};
> +
> +	vspi2: vsp at fe9c0000 {
> +		compatible = "renesas,vsp2";
> +		reg = <0 0xfe9c0000 0 0x8000>;
> +		interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpg CPG_MOD 629>;
> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> +		resets = <&cpg 629>;
> +
> +		renesas,fcp = <&fcpvi2>;
> +	};
> +
> +	fcpvi2: fcp at fe9cf000 {
> +		compatible = "renesas,fcpv";
> +		reg = <0 0xfe9cf000 0 0x200>;
> +		clocks = <&cpg CPG_MOD 609>;
> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> +		resets = <&cpg 609>;
> +	};
> +
> +	vspd3: vsp at fea38000 {
> +		compatible = "renesas,vsp2";
> +		reg = <0 0xfea38000 0 0x4000>;
> +		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpg CPG_MOD 620>;
> +		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +		resets = <&cpg 620>;
> +
> +		renesas,fcp = <&fcpvd3>;
> +	};
> +
> +	fcpvd3: fcp at fea3f000 {
> +		compatible = "renesas,fcpv";
> +		reg = <0 0xfea3f000 0 0x200>;
> +		clocks = <&cpg CPG_MOD 600>;
> +		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +		resets = <&cpg 600>;
> +	};
> +
> +	fdp1 at fe948000 {
> +		compatible = "renesas,fdp1";
> +		reg = <0 0xfe948000 0 0x2400>;
> +		interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cpg CPG_MOD 117>;
> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> +		resets = <&cpg 117>;
> +		renesas,fcp = <&fcpf2>;
> +	};
> +};
> +
> +&du {
> +	vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
> +};
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index
> ab352159de6572c9..60a1f4356b4b15c7 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
> @@ -10,12 +10,12 @@
>   */
> 
>  /dts-v1/;
> -#include "r8a7795.dtsi"
> +#include "r8a7795-es1.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
> 
>  / {
> -	model = "Renesas H3ULCB board based on r8a7795";
> +	model = "Renesas H3ULCB board based on r8a7795 ES1.x";
>  	compatible = "renesas,h3ulcb", "renesas,r8a7795";
> 
>  	aliases {
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index
> f25241921067dcef..7758b479dd98d2e9 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> @@ -32,11 +32,11 @@
>   */
> 
>  /dts-v1/;
> -#include "r8a7795.dtsi"
> +#include "r8a7795-es1.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> 
>  / {
> -	model = "Renesas Salvator-X board based on r8a7795";
> +	model = "Renesas Salvator-X board based on r8a7795 ES1.x";
>  	compatible = "renesas,salvator-x", "renesas,r8a7795";
> 
>  	aliases {
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index
> e99d6443b3e493a4..e1caa4e14593a299 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -182,7 +182,7 @@
>  		clock-frequency = <0>;
>  	};
> 
> -	soc {
> +	soc: soc {
>  		compatible = "simple-bus";
>  		interrupt-parent = <&gic>;
> 
> @@ -1274,16 +1274,6 @@
>  			status = "disabled";
>  		};
> 
> -		xhci1: usb at ee0400000 {
> -			compatible = "renesas,xhci-r8a7795", "renesas,rcar-
gen3-xhci";
> -			reg = <0 0xee040000 0 0xc00>;
> -			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&cpg CPG_MOD 327>;
> -			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> -			resets = <&cpg 327>;
> -			status = "disabled";
> -		};
> -
>  		usb_dmac0: dma-controller at e65a0000 {
>  			compatible = "renesas,r8a7795-usb-dmac",
>  				     "renesas,usb-dmac";
> @@ -1568,14 +1558,6 @@
>  			resets = <&cpg 614>;
>  		};
> 
> -		fcpf2: fcp at fe952000 {
> -			compatible = "renesas,fcpf";
> -			reg = <0 0xfe952000 0 0x200>;
> -			clocks = <&cpg CPG_MOD 613>;
> -			power-domains = <&sysc R8A7795_PD_A3VP>;
> -			resets = <&cpg 613>;
> -		};
> -
>  		vspbd: vsp at fe960000 {
>  			compatible = "renesas,vsp2";
>  			reg = <0 0xfe960000 0 0x8000>;
> @@ -1633,25 +1615,6 @@
>  			resets = <&cpg 610>;
>  		};
> 
> -		vspi2: vsp at fe9c0000 {
> -			compatible = "renesas,vsp2";
> -			reg = <0 0xfe9c0000 0 0x8000>;
> -			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&cpg CPG_MOD 629>;
> -			power-domains = <&sysc R8A7795_PD_A3VP>;
> -			resets = <&cpg 629>;
> -
> -			renesas,fcp = <&fcpvi2>;
> -		};
> -
> -		fcpvi2: fcp at fe9cf000 {
> -			compatible = "renesas,fcpv";
> -			reg = <0 0xfe9cf000 0 0x200>;
> -			clocks = <&cpg CPG_MOD 609>;
> -			power-domains = <&sysc R8A7795_PD_A3VP>;
> -			resets = <&cpg 609>;
> -		};
> -
>  		vspd0: vsp at fea20000 {
>  			compatible = "renesas,vsp2";
>  			reg = <0 0xfea20000 0 0x4000>;
> @@ -1709,25 +1672,6 @@
>  			resets = <&cpg 601>;
>  		};
> 
> -		vspd3: vsp at fea38000 {
> -			compatible = "renesas,vsp2";
> -			reg = <0 0xfea38000 0 0x4000>;
> -			interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&cpg CPG_MOD 620>;
> -			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> -			resets = <&cpg 620>;
> -
> -			renesas,fcp = <&fcpvd3>;
> -		};
> -
> -		fcpvd3: fcp at fea3f000 {
> -			compatible = "renesas,fcpv";
> -			reg = <0 0xfea3f000 0 0x200>;
> -			clocks = <&cpg CPG_MOD 600>;
> -			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> -			resets = <&cpg 600>;
> -		};
> -
>  		fdp1 at fe940000 {
>  			compatible = "renesas,fdp1";
>  			reg = <0 0xfe940000 0 0x2400>;
> @@ -1748,16 +1692,6 @@
>  			renesas,fcp = <&fcpf1>;
>  		};
> 
> -		fdp1 at fe948000 {
> -			compatible = "renesas,fdp1";
> -			reg = <0 0xfe948000 0 0x2400>;
> -			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&cpg CPG_MOD 117>;
> -			power-domains = <&sysc R8A7795_PD_A3VP>;
> -			resets = <&cpg 117>;
> -			renesas,fcp = <&fcpf2>;
> -		};
> -
>  		du: display at feb00000 {
>  			compatible = "renesas,du-r8a7795";
>  			reg = <0 0xfeb00000 0 0x80000>,
> @@ -1775,8 +1709,6 @@
>  			clock-names = "du.0", "du.1", "du.2", "du.3", 
"lvds.0";
>  			status = "disabled";
> 
> -			vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
> -
>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;

-- 
Regards,

Laurent Pinchart