[PATCH v6 1/4] bus: mhi: core: Destroy SBL devices when moving to mission mode

[Bhaumik Bhatt <bbhatt@codeaurora.org>]

Currently, client devices are created in SBL or AMSS (mission
mode) and only destroyed after power down or SYS ERROR. When
moving between certain execution environments, such as from SBL
to AMSS, no clean-up is required. This presents an issue where
SBL-specific channels are left open and client drivers now run in
an execution environment where they cannot operate. Fix this by
expanding the mhi_destroy_device() to do an execution environment
specific clean-up if one is requested. Close the gap and destroy
devices in such scenarios that allow SBL client drivers to clean
up once device enters mission mode.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 29 +++++++++++++++++++++++++----
 drivers/bus/mhi/core/pm.c   |  3 +++
 2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 4e0131b..7a2e98c 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -244,8 +244,10 @@ static void mhi_del_ring_element(struct mhi_controller *mhi_cntrl,
 
 int mhi_destroy_device(struct device *dev, void *data)
 {
+	struct mhi_chan *ul_chan, *dl_chan;
 	struct mhi_device *mhi_dev;
 	struct mhi_controller *mhi_cntrl;
+	enum mhi_ee_type ee = MHI_EE_MAX;
 
 	if (dev->bus != &mhi_bus_type)
 		return 0;
@@ -257,6 +259,17 @@ int mhi_destroy_device(struct device *dev, void *data)
 	if (mhi_dev->dev_type == MHI_DEVICE_CONTROLLER)
 		return 0;
 
+	ul_chan = mhi_dev->ul_chan;
+	dl_chan = mhi_dev->dl_chan;
+
+	/*
+	 * If execution environment is specified, remove only those devices that
+	 * started in them based on ee_mask for the channels as we move on to a
+	 * different execution environment
+	 */
+	if (data)
+		ee = *(enum mhi_ee_type *)data;
+
 	/*
 	 * For the suspend and resume case, this function will get called
 	 * without mhi_unregister_controller(). Hence, we need to drop the
@@ -264,11 +277,19 @@ int mhi_destroy_device(struct device *dev, void *data)
 	 * be sure that there will be no instances of mhi_dev left after
 	 * this.
 	 */
-	if (mhi_dev->ul_chan)
-		put_device(&mhi_dev->ul_chan->mhi_dev->dev);
+	if (ul_chan) {
+		if (ee != MHI_EE_MAX && !(ul_chan->ee_mask & BIT(ee)))
+			return 0;
 
-	if (mhi_dev->dl_chan)
-		put_device(&mhi_dev->dl_chan->mhi_dev->dev);
+		put_device(&ul_chan->mhi_dev->dev);
+	}
+
+	if (dl_chan) {
+		if (ee != MHI_EE_MAX && !(dl_chan->ee_mask & BIT(ee)))
+			return 0;
+
+		put_device(&dl_chan->mhi_dev->dev);
+	}
 
 	dev_dbg(&mhi_cntrl->mhi_dev->dev, "destroy device for chan:%s\n",
 		 mhi_dev->name);
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 681960c..3bd81d0 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -377,6 +377,7 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 {
 	struct mhi_event *mhi_event;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	enum mhi_ee_type current_ee = mhi_cntrl->ee;
 	int i, ret;
 
 	dev_dbg(dev, "Processing Mission Mode transition\n");
@@ -395,6 +396,8 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 
 	wake_up_all(&mhi_cntrl->state_event);
 
+	device_for_each_child(&mhi_cntrl->mhi_dev->dev, &current_ee,
+			      mhi_destroy_device);
 	mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_MISSION_MODE);
 
 	/* Force MHI to be in M0 state before continuing */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project