From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: u-boot@lists.denx.de
Subject: [PATCH 2/3] ARM: mediatek: Add MT8175 support
Date: Thu, 1 Apr 2021 09:42:27 +0800 [thread overview]
Message-ID: <1617241347.2752.14.camel@mhfsdcap03> (raw)
In-Reply-To: <20210330143100.3358498-2-fparent@baylibre.com>
On Tue, 2021-03-30 at 16:30 +0200, Fabien Parent wrote:
> Add MT8175 SoC support.
>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>
> v2:
nit: add v2 also in title
> * Removed 'usb_host' node
> * Removed some unneeded "mac" reg and interrupts definitio
> in the 'usb' node
> * Modify the u3phy and its subnode to encode the ranges property as
> <prop-encoded-array>.
>
> arch/arm/dts/mt8175.dtsi | 229 +++++++++++++++++++++++++
> arch/arm/mach-mediatek/Kconfig | 9 +
> arch/arm/mach-mediatek/Makefile | 1 +
> arch/arm/mach-mediatek/mt8175/Makefile | 3 +
> arch/arm/mach-mediatek/mt8175/init.c | 75 ++++++++
> 5 files changed, 317 insertions(+)
> create mode 100644 arch/arm/dts/mt8175.dtsi
> create mode 100644 arch/arm/mach-mediatek/mt8175/Makefile
> create mode 100644 arch/arm/mach-mediatek/mt8175/init.c
>
> diff --git a/arch/arm/dts/mt8175.dtsi b/arch/arm/dts/mt8175.dtsi
> new file mode 100644
> index 000000000000..bfb02741eef4
> --- /dev/null
> +++ b/arch/arm/dts/mt8175.dtsi
> @@ -0,0 +1,229 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Copyright (C) 2021 BayLibre, SAS
> + * Author: Ben Ho <ben.ho@mediatek.com>
> + * Erin Lo <erin.lo@mediatek.com>
> + * Fabien Parent <fparent@baylibre.com>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clock/mt8175-clk.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/phy/phy.h>
> +
> +/ {
> + compatible = "mediatek,mt8175";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + };
> + };
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x000>;
> + enable-method = "psci";
> + };
> +
> + cpu1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x001>;
> + enable-method = "psci";
> + };
> +
> + cpu2: cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x002>;
> + enable-method = "psci";
> + };
> +
> + cpu3: cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x003>;
> + enable-method = "psci";
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + watchdog: watchdog at 10007000 {
> + compatible = "mediatek,mt8175-rgu",
> + "mediatek,wdt";
> + reg = <0 0x10007000 0 0x100>;
> + #reset-cells = <1>;
> + };
> +
> + gic: interrupt-controller at c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0xc000000 0 0x80000>,
> + <0 0xc080000 0 0x80000>;
> +
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + sysirq: intpol-controller at 10200a80 {
> + compatible = "mediatek,mt8175-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200a80 0 0x20>;
> + };
> +
> + topckgen: topckgen at 10000000 {
> + compatible = "mediatek,mt8175-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + topckgen_cg: topckgen-cg at 10000000 {
> + compatible = "mediatek,mt8175-topckgen-cg", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg: infracfg at 10001000 {
> + compatible = "mediatek,mt8175-infracfg", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + apmixedsys: syscon at 1000c000 {
> + compatible = "mediatek,mt8175-apmixedsys", "syscon";
> + reg = <0 0x1000c000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + uart0: uart0 at 11002000 {
> + compatible = "mediatek,mt8175-uart",
> + "mediatek,hsuart";
> + reg = <0 0x11002000 0 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
> + clock-frequency = <26000000>;
> + clocks = <&topckgen CLK_TOP_CLK26M>, <&infracfg CLK_IFR_UART0>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart1: uart1 at 11003000 {
> + compatible = "mediatek,mt8175-uart",
> + "mediatek,hsuart";
> + reg = <0 0x11003000 0 0x1000>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_CLK26M>, <&infracfg CLK_IFR_UART1>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart2: uart2 at 11004000 {
> + compatible = "mediatek,mt8175-uart",
> + "mediatek,hsuart";
> + reg = <0 0x11004000 0 0x1000>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_CLK26M>, <&infracfg CLK_IFR_UART2>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + mmc0: mmc at 11230000 {
Nit: Usually sort nodes according to address
> + compatible = "mediatek,mt8175-mmc", "mediatek,mt8183-mmc";
> + reg = <0 0x11230000 0 0x1000>,
> + <0 0x11cd0000 0 0x1000>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
> + <&infracfg CLK_IFR_MSDC0_HCLK>,
> + <&infracfg CLK_IFR_MSDC0_SRC>;
> + clock-names = "source", "hclk", "source_cg";
> + status = "disabled";
> + };
> +
> + u3phy: usb-phy at 11cc0000 {
> + compatible = "mediatek,generic-tphy-v2";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x11cc0000 0x2000>;
> + status = "okay";
> +
> + u2port0: usb-phy at 0 {
> + reg = <0 0x400>;
> + clocks = <&topckgen_cg CLK_TOP_SSUSB_PHY_CK_EN>,
> + <&topckgen_cg CLK_TOP_USB20_48M_EN>;
> + clock-names = "ref", "da_ref";
> + #phy-cells = <1>;
> + status = "okay";
> + };
> +
> + u2port1: usb-phy at 1000 {
> + reg = <0x1000 0x400>;
> + clocks = <&topckgen_cg CLK_TOP_SSUSB_PHY_CK_EN>,
> + <&topckgen_cg CLK_TOP_USB20_48M_EN>;
> + clock-names = "ref", "da_ref";
> + #phy-cells = <1>;
> + status = "okay";
> + };
> + };
> +
> + usb: usb at 11201000 {
> + compatible ="mediatek,mt8175-mtu3", "mediatek,mtu3";
> + reg = <0 0x11203e00 0 0x0100>;
> + reg-names = "ippc";
> + phys = <&u2port0 PHY_TYPE_USB2>,
> + <&u2port1 PHY_TYPE_USB2>;
> + clocks = <&topckgen_cg CLK_TOP_SSUSB_TOP_CK_EN>,
> + <&infracfg CLK_IFR_SSUSB_REF>,
> + <&infracfg CLK_IFR_SSUSB_SYS>,
> + <&infracfg CLK_IFR_ICUSB>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck",
> + "dma_ck";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> +
> + ssusb: ssusb at 11200000 {
> + compatible = "mediatek,ssusb";
> + reg = <0 0x11200000 0 0x3e00>;
> + reg-names = "mac";
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> + status = "disabled";
> + };
> + };
> + };
> +};
For usb / phy nodes:
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Thanks a lot
> diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
> index e067604d9b39..4a91fb764175 100644
> --- a/arch/arm/mach-mediatek/Kconfig
> +++ b/arch/arm/mach-mediatek/Kconfig
> @@ -41,6 +41,14 @@ config TARGET_MT7629
> including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet,
> switch, USB3.0, PCIe, UART, SPI, I2C and PWM.
>
> +config TARGET_MT8175
> + bool "MediaTek MT8175 SoC"
> + select ARM64
> + help
> + The MediaTek MT8175 is a ARM64-based SoC with a quad-core Cortex-A53.
> + It is including UART, SPI, USB2.0 dual role, SD and MMC cards, NAND, PWM,
> + I2C, I2S, S/PDIF, and several LPDDR3 and LPDDR4 options.
> +
> config TARGET_MT8183
> bool "MediaTek MT8183 SoC"
> select ARM64
> @@ -83,6 +91,7 @@ endchoice
> source "board/mediatek/mt7622/Kconfig"
> source "board/mediatek/mt7623/Kconfig"
> source "board/mediatek/mt7629/Kconfig"
> +source "board/mediatek/mt8175/Kconfig"
> source "board/mediatek/mt8183/Kconfig"
> source "board/mediatek/mt8512/Kconfig"
> source "board/mediatek/mt8516/Kconfig"
> diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile
> index 0f5b0c16d2cb..ba030fb0b373 100644
> --- a/arch/arm/mach-mediatek/Makefile
> +++ b/arch/arm/mach-mediatek/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_MT8512) += mt8512/
> obj-$(CONFIG_TARGET_MT7622) += mt7622/
> obj-$(CONFIG_TARGET_MT7623) += mt7623/
> obj-$(CONFIG_TARGET_MT7629) += mt7629/
> +obj-$(CONFIG_TARGET_MT8175) += mt8175/
> obj-$(CONFIG_TARGET_MT8183) += mt8183/
> obj-$(CONFIG_TARGET_MT8516) += mt8516/
> obj-$(CONFIG_TARGET_MT8518) += mt8518/
> diff --git a/arch/arm/mach-mediatek/mt8175/Makefile b/arch/arm/mach-mediatek/mt8175/Makefile
> new file mode 100644
> index 000000000000..886ab7e4eb9f
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/mt8175/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-y += init.o
> diff --git a/arch/arm/mach-mediatek/mt8175/init.c b/arch/arm/mach-mediatek/mt8175/init.c
> new file mode 100644
> index 000000000000..5161c1ce78d5
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/mt8175/init.c
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Copyright (C) 2021 BayLibre, SAS
> + * Author: Fabien Parent <fparent@baylibre.com>
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <asm/armv8/mmu.h>
> +#include <asm/global_data.h>
> +#include <asm/system.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> + int ret;
> +
> + ret = fdtdec_setup_memory_banksize();
> + if (ret)
> + return ret;
> +
> + return fdtdec_setup_mem_size_base();
> +}
> +
> +int dram_init_banksize(void)
> +{
> + gd->bd->bi_dram[0].start = gd->ram_base;
> + gd->bd->bi_dram[0].size = gd->ram_size;
> +
> + return 0;
> +}
> +
> +int mtk_pll_early_init(void)
> +{
> + return 0;
> +}
> +
> +int mtk_soc_early_init(void)
> +{
> + return 0;
> +}
> +
> +void reset_cpu(ulong addr)
> +{
> + psci_system_reset();
> +}
> +
> +int print_cpuinfo(void)
> +{
> + printf("CPU: MediaTek MT8175\n");
> + return 0;
> +}
> +
> +static struct mm_region mt8175_mem_map[] = {
> + {
> + /* DDR */
> + .virt = 0x40000000UL,
> + .phys = 0x40000000UL,
> + .size = 0x40000000UL,
> + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
> + }, {
> + .virt = 0x00000000UL,
> + .phys = 0x00000000UL,
> + .size = 0x20000000UL,
> + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> + PTE_BLOCK_NON_SHARE |
> + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> + }, {
> + 0,
> + }
> +};
> +
> +struct mm_region *mem_map = mt8175_mem_map;
next prev parent reply other threads:[~2021-04-01 1:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-30 14:30 [PATCH 1/3] clk: mediatek: Add MT8175 clock driver Fabien Parent
2021-03-30 14:30 ` [PATCH 2/3] ARM: mediatek: Add MT8175 support Fabien Parent
2021-04-01 1:42 ` Chunfeng Yun [this message]
2021-03-30 14:30 ` [PATCH 3/3] board: Add MT8175 pumpkin board support Fabien Parent
2021-04-19 15:48 ` [PATCH 1/3] clk: mediatek: Add MT8175 clock driver Fabien Parent
-- strict thread matches above, loose matches on Subject: below --
2021-03-29 19:27 Fabien Parent
2021-03-29 19:27 ` [PATCH 2/3] ARM: mediatek: Add MT8175 support Fabien Parent
2021-03-30 2:53 ` Chunfeng Yun
2021-03-30 14:23 ` Fabien Parent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617241347.2752.14.camel@mhfsdcap03 \
--to=chunfeng.yun@mediatek.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.