From: dillon min This patch aims to fix two potential bug: - no lock to protect uart register in this case stm32_usart_threaded_interrupt() spin_lock(&port->lock); ... stm32_usart_receive_chars() uart_handle_sysrq_char(); sysrq_function(); printk(); stm32_usart_console_write(); locked = 0; //since port->sysrq is not zero, no lock to protect forward register access. - if add spin_trylock_irqsave() to protect uart register for sysrq = 1 case, that might got recursive locking under UP. So, use uart_prepare_sysrq_char(), uart_unlock_and_check_sysrq() move sysrq handler position to irq/thread_d handler, just record sysrq_ch in stm32_usart_receive_chars() by uart_prepare_sysrq_char() delay the sysrq process to next interrupt handler. new flow: stm32_usart_threaded_interrupt()/stm32_usart_interrupt() spin_lock_irqsave(&port->lock); ... uart_unlock_and_check_sysrq(); spin_unlock_irqrestore(); handle_sysrq(sysrq_ch); stm32_usart_threaded_interrupt()//stm32_usart_interrupt() return Cc: Johan Hovold Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Gerald Baeza Cc: Erwan Le Ray Reported-by: kernel test robot Signed-off-by: dillon min --- v3: add uart_prepare_sysrq_char(), uart_unlock_and_check_sysrq() to move sysrq handler inside interrupt routinei to avoid recursive locking, according to Johan Hovold suggestion, thanks. drivers/tty/serial/stm32-usart.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index b3675cf25a69..981f50ec784e 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -271,7 +271,7 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded) } } - if (uart_handle_sysrq_char(port, c)) + if (uart_prepare_sysrq_char(port, c)) continue; uart_insert_char(port, sr, USART_SR_ORE, c, flag); } @@ -457,9 +457,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) struct uart_port *port = ptr; struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + unsigned long flags; u32 sr; - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); sr = readl_relaxed(port->membase + ofs->isr); @@ -477,7 +478,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) stm32_usart_transmit_chars(port); - spin_unlock(&port->lock); + uart_unlock_and_check_sysrq(port, flags); if (stm32_port->rx_ch) return IRQ_WAKE_THREAD; @@ -489,13 +490,14 @@ static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; struct stm32_port *stm32_port = to_stm32_port(port); + unsigned long flags; - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); if (stm32_port->rx_ch) stm32_usart_receive_chars(port, true); - spin_unlock(&port->lock); + uart_unlock_and_check_sysrq(port, flags); return IRQ_HANDLED; } @@ -1354,13 +1356,10 @@ static void stm32_usart_console_write(struct console *co, const char *s, u32 old_cr1, new_cr1; int locked = 1; - local_irq_save(flags); - if (port->sysrq) - locked = 0; - else if (oops_in_progress) - locked = spin_trylock(&port->lock); + if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); else - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); /* Save and disable interrupts, enable the transmitter */ old_cr1 = readl_relaxed(port->membase + ofs->cr1); @@ -1374,8 +1373,7 @@ static void stm32_usart_console_write(struct console *co, const char *s, writel_relaxed(old_cr1, port->membase + ofs->cr1); if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); + spin_unlock_irqrestore(&port->lock, flags); } static int stm32_usart_console_setup(struct console *co, char *options) -- 2.7.4