From: Ravishankar <1920752@bugs.launchpad.net>
To: qemu-devel@nongnu.org
Subject: [Bug 1920752] Re: USB SoundCard Passthrough not working on arm64
Date: Thu, 22 Apr 2021 10:59:42 -0000 [thread overview]
Message-ID: <161908918262.10128.9719450871317072146.malone@wampee.canonical.com> (raw)
In-Reply-To: 161641534336.27708.1507547188965412298.malonedeb@gac.canonical.com
Hello,
You can close this bug as as a simple usb-audio switch is working fine for me:
I just added -device usb-audio and set the -device nec-usb-xhci and sound within the qemu is working fine..
qemu-system-aarch64 -M virt -m 2048 -smp 2 -cpu host,aarch64=off
-enable-kvm -kernel vmlinuz-4.19.0-14-armmp-lpae -initrd
initrd.img-4.19.0-14-armmp-lpae -append 'root=/dev/vda2' -device nec-
usb-xhci,id=xhci -device usb-kbd -device usb-mouse -device usb-audio
-serial stdio -device virtio-gpu-pci,virgl=on,xres=1600,yres=900
-display sdl,gl=on -drive if=none,file=hda2.qcow2,format=qcow2,id=hd
-device virtio-blk-device,drive=hd -netdev user,id=mynet -device virtio-
net-device,netdev=mynet -bios edk2-arm-code.fd -no-reboot
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1920752
Title:
USB SoundCard Passthrough not working on arm64
Status in QEMU:
New
Bug description:
Hello,
I am virtualizing a armhf guest on a aarch64 host and was to use my
Sound Blaster USB Soundcard as passthrough.
armhf Guest is: Debian Buster
aarch64 host is a jetson nano. KVM is enabled.
Latest qemu is built from sources.
The command I use for running is as follows:
../qemu/build/qemu-system-aarch64 -M virt -m 2048 -smp 2 -cpu host,aarch64=off -enable-kvm \
-kernel vmlinuz-4.19.0-14-armmp-lpae -initrd initrd.img-4.19.0-14-armmp-lpae -append 'root=/dev/vda2' \
-device nec-usb-xhci -device usb-kbd -device usb-mouse -device usb-host,hostbus=1,hostport=2.3 -serial stdio \
-device virtio-gpu-pci,virgl=on,xres=1600,yres=900 -display sdl,gl=on \
-drive if=none,file=hda2.qcow2,format=qcow2,id=hd -device virtio-blk-device,drive=hd \
-netdev user,id=mynet -device virtio-net-device,netdev=mynet \
-bios edk2-arm-code.fd -no-reboot
Where are my lsusb -t shows:
rreddy78@jetson-nano:~/Downloads$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=tegra-xusb/4p, 5000M
|__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=tegra-xusb/5p, 480M
|__ Port 2: Dev 6, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 7, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 8, If 3, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 8, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 8, If 2, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 3: Dev 8, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 4: Dev 9, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
Within the VM I can see the usb as follows
rreddy78@debian:~$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 480M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 480M
Its looks like some passthrough as but it seems like only for
_ Port 3: Dev 8, If 3, Class=Human Interface Device, Driver=usbhid,
12M
I am not sure if passthrough even works because this post I saw
https://community.arm.com/developer/ip-products/system/f/embedded-
forum/48031/usb-pass-through-in-qemu-command-line-for-arm-
machines/168764#168764
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1920752/+subscriptions
next prev parent reply other threads:[~2021-04-22 11:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-22 12:15 [Bug 1920752] [NEW] USB SoundCard Passthrough not working on arm64 Ravishankar
2021-03-22 13:24 ` [Bug 1920752] " Philippe Mathieu-Daudé
2021-03-22 14:50 ` Ravishankar
2021-03-22 14:51 ` Ravishankar
2021-03-26 9:59 ` Gerd Hoffmann
2021-04-22 10:32 ` Ravishankar
2021-04-22 10:59 ` Ravishankar [this message]
2021-05-03 8:05 ` Ravishankar
2021-05-15 10:45 ` Thomas Huth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=161908918262.10128.9719450871317072146.malone@wampee.canonical.com \
--to=1920752@bugs.launchpad.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.