[PATCH] bus: mhi: core: Validate channel ID when processing command completions

[PATCH] bus: mhi: core: Validate channel ID when processing command completions

[Bhaumik Bhatt]

MHI reads the channel ID from the event ring element sent by the
device which can be any value between 0 and 255. In order to
prevent any out of bound accesses, add a check against the maximum
number of channels supported by the controller and those channels
not configured yet so as to skip processing of that event ring
element.

Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 22acde1..ed07421 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
 	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
 
 	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
-	mhi_chan = &mhi_cntrl->mhi_chan[chan];
-	write_lock_bh(&mhi_chan->lock);
-	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
-	complete(&mhi_chan->completion);
-	write_unlock_bh(&mhi_chan->lock);
+	WARN_ON(chan >= mhi_cntrl->max_chan);
+
+	if (chan < mhi_cntrl->max_chan &&
+	    mhi_cntrl->mhi_chan[chan].configured) {
+		mhi_chan = &mhi_cntrl->mhi_chan[chan];
+		write_lock_bh(&mhi_chan->lock);
+		mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
+		complete(&mhi_chan->completion);
+		write_unlock_bh(&mhi_chan->lock);
+	}
 
 	mhi_del_ring_element(mhi_cntrl, mhi_ring);
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH] bus: mhi: core: Validate channel ID when processing command completions

[Hemant Kumar]

On 4/26/21 4:58 PM, Bhaumik Bhatt wrote:
> MHI reads the channel ID from the event ring element sent by the
> device which can be any value between 0 and 255. In order to
> prevent any out of bound accesses, add a check against the maximum
> number of channels supported by the controller and those channels
> not configured yet so as to skip processing of that event ring
> element.
> 
> Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> ---
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH] bus: mhi: core: Validate channel ID when processing command completions

[Jeffrey Hugo]

On 4/26/2021 5:58 PM, Bhaumik Bhatt wrote:
> MHI reads the channel ID from the event ring element sent by the
> device which can be any value between 0 and 255. In order to
> prevent any out of bound accesses, add a check against the maximum
> number of channels supported by the controller and those channels
> not configured yet so as to skip processing of that event ring
> element.
> 
> Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> ---

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

Re: [PATCH] bus: mhi: core: Validate channel ID when processing command completions

[Manivannan Sadhasivam]

On Mon, Apr 26, 2021 at 04:58:58PM -0700, Bhaumik Bhatt wrote:
> MHI reads the channel ID from the event ring element sent by the
> device which can be any value between 0 and 255. In order to
> prevent any out of bound accesses, add a check against the maximum
> number of channels supported by the controller and those channels
> not configured yet so as to skip processing of that event ring
> element.
> 
> Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/bus/mhi/core/main.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 22acde1..ed07421 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
>  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
>  
>  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> -	mhi_chan = &mhi_cntrl->mhi_chan[chan];
> -	write_lock_bh(&mhi_chan->lock);
> -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> -	complete(&mhi_chan->completion);
> -	write_unlock_bh(&mhi_chan->lock);
> +	WARN_ON(chan >= mhi_cntrl->max_chan);
> +
> +	if (chan < mhi_cntrl->max_chan &&
> +	    mhi_cntrl->mhi_chan[chan].configured) {
> +		mhi_chan = &mhi_cntrl->mhi_chan[chan];
> +		write_lock_bh(&mhi_chan->lock);
> +		mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> +		complete(&mhi_chan->completion);
> +		write_unlock_bh(&mhi_chan->lock);
> +	}
>  
>  	mhi_del_ring_element(mhi_cntrl, mhi_ring);
>  }
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Re: [PATCH] bus: mhi: core: Validate channel ID when processing command completions

[Manivannan Sadhasivam]

On Mon, Apr 26, 2021 at 04:58:58PM -0700, Bhaumik Bhatt wrote:
> MHI reads the channel ID from the event ring element sent by the
> device which can be any value between 0 and 255. In order to
> prevent any out of bound accesses, add a check against the maximum
> number of channels supported by the controller and those channels
> not configured yet so as to skip processing of that event ring
> element.
> 
> Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>

Applied to mhi-next!

Thanks,
Mani

> ---
>  drivers/bus/mhi/core/main.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 22acde1..ed07421 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
>  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
>  
>  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> -	mhi_chan = &mhi_cntrl->mhi_chan[chan];
> -	write_lock_bh(&mhi_chan->lock);
> -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> -	complete(&mhi_chan->completion);
> -	write_unlock_bh(&mhi_chan->lock);
> +	WARN_ON(chan >= mhi_cntrl->max_chan);
> +
> +	if (chan < mhi_cntrl->max_chan &&
> +	    mhi_cntrl->mhi_chan[chan].configured) {
> +		mhi_chan = &mhi_cntrl->mhi_chan[chan];
> +		write_lock_bh(&mhi_chan->lock);
> +		mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> +		complete(&mhi_chan->completion);
> +		write_unlock_bh(&mhi_chan->lock);
> +	}
>  
>  	mhi_del_ring_element(mhi_cntrl, mhi_ring);
>  }
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Re: [PATCH] bus: mhi: core: Validate channel ID when processing command completions

[Manivannan Sadhasivam]

On Mon, May 24, 2021 at 10:12:28AM +0530, Manivannan Sadhasivam wrote:
> On Mon, Apr 26, 2021 at 04:58:58PM -0700, Bhaumik Bhatt wrote:
> > MHI reads the channel ID from the event ring element sent by the
> > device which can be any value between 0 and 255. In order to
> > prevent any out of bound accesses, add a check against the maximum
> > number of channels supported by the controller and those channels
> > not configured yet so as to skip processing of that event ring
> > element.
> > 
> > Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> > Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> 
> Applied to mhi-next!
> 

Sorry this has been applied to mhi-next!

Thanks,
Mani

> Thanks,
> Mani
> 
> > ---
> >  drivers/bus/mhi/core/main.c | 15 ++++++++++-----
> >  1 file changed, 10 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> > index 22acde1..ed07421 100644
> > --- a/drivers/bus/mhi/core/main.c
> > +++ b/drivers/bus/mhi/core/main.c
> > @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
> >  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
> >  
> >  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> > -	mhi_chan = &mhi_cntrl->mhi_chan[chan];
> > -	write_lock_bh(&mhi_chan->lock);
> > -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> > -	complete(&mhi_chan->completion);
> > -	write_unlock_bh(&mhi_chan->lock);
> > +	WARN_ON(chan >= mhi_cntrl->max_chan);
> > +
> > +	if (chan < mhi_cntrl->max_chan &&
> > +	    mhi_cntrl->mhi_chan[chan].configured) {
> > +		mhi_chan = &mhi_cntrl->mhi_chan[chan];
> > +		write_lock_bh(&mhi_chan->lock);
> > +		mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> > +		complete(&mhi_chan->completion);
> > +		write_unlock_bh(&mhi_chan->lock);
> > +	}
> >  
> >  	mhi_del_ring_element(mhi_cntrl, mhi_ring);
> >  }
> > -- 
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> > a Linux Foundation Collaborative Project
> > 

[PATCH] bus: mhi: core: Validate channel ID when processing command completions

[Bhaumik Bhatt]

MHI reads the channel ID from the event ring element sent by the
device which can be any value between 0 and 255. In order to
prevent any out of bound accesses, add a check against the maximum
number of channels supported by the controller and those channels
not configured yet so as to skip processing of that event ring
element.

Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org
---
 drivers/bus/mhi/core/main.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 22acde1..fc9196f 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -773,11 +773,18 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
 	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
 
 	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
-	mhi_chan = &mhi_cntrl->mhi_chan[chan];
-	write_lock_bh(&mhi_chan->lock);
-	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
-	complete(&mhi_chan->completion);
-	write_unlock_bh(&mhi_chan->lock);
+
+	if (chan < mhi_cntrl->max_chan &&
+	    mhi_cntrl->mhi_chan[chan].configured) {
+		mhi_chan = &mhi_cntrl->mhi_chan[chan];
+		write_lock_bh(&mhi_chan->lock);
+		mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
+		complete(&mhi_chan->completion);
+		write_unlock_bh(&mhi_chan->lock);
+	} else {
+		dev_err(&mhi_cntrl->mhi_dev->dev,
+			"Completion packet for invalid channel ID: %d\n", chan);
+	}
 
 	mhi_del_ring_element(mhi_cntrl, mhi_ring);
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH] bus: mhi: core: Validate channel ID when processing command completions

[Manivannan Sadhasivam]

On Thu, Jun 24, 2021 at 11:09:01AM -0700, Bhaumik Bhatt wrote:
> MHI reads the channel ID from the event ring element sent by the
> device which can be any value between 0 and 255. In order to
> prevent any out of bound accesses, add a check against the maximum
> number of channels supported by the controller and those channels
> not configured yet so as to skip processing of that event ring
> element.
> 
> Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org

Removed "Link" and applied to mhi-next!

Thanks,
Mani

> ---
>  drivers/bus/mhi/core/main.c | 17 ++++++++++++-----
>  1 file changed, 12 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 22acde1..fc9196f 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -773,11 +773,18 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
>  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
>  
>  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> -	mhi_chan = &mhi_cntrl->mhi_chan[chan];
> -	write_lock_bh(&mhi_chan->lock);
> -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> -	complete(&mhi_chan->completion);
> -	write_unlock_bh(&mhi_chan->lock);
> +
> +	if (chan < mhi_cntrl->max_chan &&
> +	    mhi_cntrl->mhi_chan[chan].configured) {
> +		mhi_chan = &mhi_cntrl->mhi_chan[chan];
> +		write_lock_bh(&mhi_chan->lock);
> +		mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> +		complete(&mhi_chan->completion);
> +		write_unlock_bh(&mhi_chan->lock);
> +	} else {
> +		dev_err(&mhi_cntrl->mhi_dev->dev,
> +			"Completion packet for invalid channel ID: %d\n", chan);
> +	}
>  
>  	mhi_del_ring_element(mhi_cntrl, mhi_ring);
>  }
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>