From mboxrd@z Thu Jan 1 00:00:00 1970 From: Masami Hiramatsu Date: Mon, 10 May 2021 15:32:51 +0900 Subject: [PATCH v3 11/14] board: synquacer: Add DeveloperBox 96boards EE support In-Reply-To: <162062825393.501222.13616174511857694530.stgit@localhost> References: <162062825393.501222.13616174511857694530.stgit@localhost> Message-ID: <162062837154.501222.959991352405957601.stgit@localhost> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/ Signed-off-by: Masami Hiramatsu --- Changes in v3: - Enable CONFIG_MMC_SDHCI_F_SDH30. - Enable CONFIG_CMD_GENERIC (fstype command) for distro boot. - Remove unneeded CONFIG_ONLY_GENERIC_GPIO. Changes in v2: - Do not include arch/gpio.h and remove arch-sc2a11/gpio.h. - Remove non-UEFI boot commands. - Use Distro boot. - Remove NOR-connected SPI node by path instead of alias. - Rename configs/SynQuacer_defconfig to configs/synquacer_developerbox_defconfig. - Rename include/configs/SynQuacer.h to include/configs/synquacer.h. - Move README under doc/board/socionext/ and make it .rst text. --- arch/arm/Kconfig | 14 +++ board/socionext/developerbox/Kconfig | 36 +++++++ board/socionext/developerbox/MAINTAINERS | 13 ++ board/socionext/developerbox/Makefile | 9 ++ board/socionext/developerbox/developerbox.c | 145 +++++++++++++++++++++++++++ configs/synquacer_developerbox_defconfig | 94 ++++++++++++++++++ doc/board/index.rst | 1 doc/board/socionext/developerbox.rst | 87 ++++++++++++++++ doc/board/socionext/index.rst | 9 ++ include/configs/synquacer.h | 106 ++++++++++++++++++++ 10 files changed, 514 insertions(+) create mode 100644 board/socionext/developerbox/Kconfig create mode 100644 board/socionext/developerbox/MAINTAINERS create mode 100644 board/socionext/developerbox/Makefile create mode 100644 board/socionext/developerbox/developerbox.c create mode 100644 configs/synquacer_developerbox_defconfig create mode 100644 doc/board/socionext/developerbox.rst create mode 100644 doc/board/socionext/index.rst create mode 100644 include/configs/synquacer.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 023824df77..7ff24535cd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1760,6 +1760,19 @@ config ARCH_UNIPHIER Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) +config ARCH_SYNQUACER + bool "Socionext SynQuacer SoCs" + select ARM64 + select DM + select GIC_V3 + select PSCI_RESET + select SYSRESET + select SYSRESET_PSCI + select OF_CONTROL + help + Support for SynQuacer SoC family developed by Socionext Inc. + This SoC is used on 96boards EE DeveloperBox. + config ARCH_STM32 bool "Support STMicroelectronics STM32 MCU with cortex M" select CPU_V7M @@ -2102,6 +2115,7 @@ source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" source "board/kontron/sl28/Kconfig" source "board/myir/mys_6ulx/Kconfig" +source "board/socionext/developerbox/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" diff --git a/board/socionext/developerbox/Kconfig b/board/socionext/developerbox/Kconfig new file mode 100644 index 0000000000..706b8dc0f1 --- /dev/null +++ b/board/socionext/developerbox/Kconfig @@ -0,0 +1,36 @@ +if ARCH_SYNQUACER + +choice + prompt "SC2A11 Cortex-A53 MPCore 24cores" + optional + +config TARGET_DEVELOPERBOX + bool "Socionext DeveloperBox" + select PCI + select DM_PCI + select PCIE_ECAM_SYNQUACER + select SYS_DISABLE_DCACHE_OPS + select OF_BOARD_SETUP + help + Choose this option if you build the U-Boot for the DeveloperBox + 96boards Enterprise Edition. + This board will booted from SCP firmware and it enables SMMU, thus + the dcache is updated automatically when DMA operation is executed. +endchoice + +config SYS_SOC + default "sc2a11" + +if TARGET_DEVELOPERBOX + +config SYS_BOARD + default "developerbox" + +config SYS_VENDOR + default "socionext" + +config SYS_CONFIG_NAME + default "synquacer" + +endif +endif diff --git a/board/socionext/developerbox/MAINTAINERS b/board/socionext/developerbox/MAINTAINERS new file mode 100644 index 0000000000..d10ad3b8f7 --- /dev/null +++ b/board/socionext/developerbox/MAINTAINERS @@ -0,0 +1,13 @@ +DEVELOPER BOX +M: Masami Hiramatsu +M: Jassi Brar +S: Maintained +F: arch/arm/dts/synquacer-* +F: board/socionext/developerbox/* +F: configs/synquacer_developerbox_defconfig +F: drivers/mmc/f_sdh30.c +F: drivers/net/sni_netsec.c +F: drivers/pci/pcie_ecam_synquacer.c +F: drivers/spi/spi-synquacer.c +F: include/configs/synquacer.h +F: doc/board/socionext/developerbox.rst diff --git a/board/socionext/developerbox/Makefile b/board/socionext/developerbox/Makefile new file mode 100644 index 0000000000..4a46de995a --- /dev/null +++ b/board/socionext/developerbox/Makefile @@ -0,0 +1,9 @@ +# +# Author: Masami Hiramatsu +# +# Copyright (C) 2021 Linaro Ltd. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := developerbox.o diff --git a/board/socionext/developerbox/developerbox.c b/board/socionext/developerbox/developerbox.c new file mode 100644 index 0000000000..3e943a279c --- /dev/null +++ b/board/socionext/developerbox/developerbox.c @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * u-boot/board/socionext/developerbox/developerbox.c + * + * Copyright (C) 2016-2017 Socionext Inc. + * Copyright (C) 2021 Linaro Ltd. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +static struct mm_region sc2a11_mem_map[] = { + { + .virt = 0x0UL, + .phys = 0x0UL, + .size = 0x80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_OUTER_SHARE + }, { + /* 1st DDR block */ + .virt = 0x80000000UL, + .phys = 0x80000000UL, + .size = PHYS_SDRAM_SIZE, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_OUTER_SHARE + }, { + /* 2nd DDR place holder */ + 0, + }, { + /* 3rd DDR place holder */ + 0, + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = sc2a11_mem_map; + +#define DDR_REGION_INDEX(i) (1 + (i)) +#define MAX_DDR_REGIONS 3 + +struct draminfo_entry { + u64 base; + u64 size; +}; + +struct draminfo { + u32 nr_regions; + u32 reserved; + struct draminfo_entry entry[3]; +}; + +struct draminfo *synquacer_draminfo = (void *)SQ_DRAMINFO_BASE; + +DECLARE_GLOBAL_DATA_PTR; + +#define LOAD_OFFSET 0x100 + +/* + * Miscellaneous platform dependent initialisations + */ +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_LOAD_ADDR + LOAD_OFFSET; + + gd->env_addr = (ulong)&default_environment[0]; + + return 0; +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + /* Remove SPI NOR for making System DT compatible with EDK2 */ + fdt_del_node_and_alias(blob, "spi_nor"); + + return 0; +} + +/* + * DRAM configuration + */ + +int dram_init(void) +{ + struct draminfo_entry *ent = synquacer_draminfo->entry; + struct mm_region *mr; + int i, ri; + + if (synquacer_draminfo->nr_regions < 1) { + log_err("Failed to get correct DRAM information\n"); + return -1; + } + + /* + * U-Boot RAM size must be under the first DRAM region so that it doesn't + * access secure memory which is@the end of the first DRAM region. + */ + gd->ram_size = ent[0].size; + + /* Update memory region maps */ + for (i = 0; i < synquacer_draminfo->nr_regions; i++) { + if (i >= MAX_DDR_REGIONS) + break; + + ri = DDR_REGION_INDEX(i); + mem_map[ri].phys = ent[i].base; + mem_map[ri].size = ent[i].size; + if (i == 0) + continue; + + mr = &mem_map[DDR_REGION_INDEX(0)]; + mem_map[ri].virt = mr->virt + mr->size; + mem_map[ri].attrs = mr->attrs; + } + + return 0; +} + +int dram_init_banksize(void) +{ + struct draminfo_entry *ent = synquacer_draminfo->entry; + int i; + + for (i = 0; i < ARRAY_SIZE(gd->bd->bi_dram); i++) { + if (i < synquacer_draminfo->nr_regions) { + debug("%s: dram[%d] = %llx@%llx\n", __func__, i, ent[i].size, ent[i].base); + gd->bd->bi_dram[i].start = ent[i].base; + gd->bd->bi_dram[i].size = ent[i].size; + } + } + + return 0; +} + +int print_cpuinfo(void) +{ + printf("CPU: SC2A11:Cortex-A53 MPCore 24cores\n"); + return 0; +} diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig new file mode 100644 index 0000000000..de12587775 --- /dev/null +++ b/configs/synquacer_developerbox_defconfig @@ -0,0 +1,94 @@ +CONFIG_ARM=y +CONFIG_ARCH_SYNQUACER=y +CONFIG_SYS_TEXT_BASE=0x08200000 +CONFIG_ENV_SIZE=0x30000 +CONFIG_ENV_OFFSET=0x300000 +CONFIG_DEBUG_UART_BASE=0x2a400000 +CONFIG_DEBUG_UART_CLOCK=62500000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y +CONFIG_TARGET_DEVELOPERBOX=y +CONFIG_DEFAULT_DEVICE_TREE="synquacer-sc2a11-developerbox" +CONFIG_AHCI=y +CONFIG_BOOTSTAGE_STASH_SIZE=4096 +CONFIG_LOGLEVEL=9 +CONFIG_LOG_MAX_LEVEL=7 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_NVEDIT_INFO=y +CONFIG_CMD_DM=y +CONFIG_CMD_MII=y +CONFIG_CMD_NET=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_SATA=y +CONFIG_CMD_NVME=y +CONFIG_CMD_USB=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDPARTS_DEFAULT="nor1:448k(BootStrap-BL1),576k(Flash-Writer),512k(SCP-BL2),480k(FIP-TFA),32k(Stg2-Tables),1m at 2m(U-Boot),1m at 3m(UBoot-Env),2m at 5m(Ex-OPTEE)" +CONFIG_MTDIDS_DEFAULT="nor1=nor1" +CONFIG_CMD_LOG=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_OF_SEPARATE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_ENV_SPI_BUS=y +CONFIG_ENV_SPI_BUS=0 +CONFIG_USE_ENV_SPI_CS=y +CONFIG_ENV_SPI_CS=0 +CONFIG_PROT_UDP=y +CONFIG_BAUDRATE=115200 +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_CONS_INDEX=0 +CONFIG_DM_SERIAL=y +CONFIG_PL01X_SERIAL=y +CONFIG_SATA=y +CONFIG_NVME=y +CONFIG_SCSI_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_F_SDH30=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_SPEED=31250000 +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHYLIB=y +CONFIG_PHYLIB_10G=y +CONFIG_NET=y +CONFIG_NETDEVICES=y +CONFIG_SNI_NETSEC=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_RGMII=y +CONFIG_MII=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_SYNQUACER_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_STORAGE=y diff --git a/doc/board/index.rst b/doc/board/index.rst index a70d2de19d..242372b321 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -21,6 +21,7 @@ Board-specific doc rockchip/index sifive/index sipeed/index + socionext/index st/index tbs/index toradex/index diff --git a/doc/board/socionext/developerbox.rst b/doc/board/socionext/developerbox.rst new file mode 100644 index 0000000000..2d943c23be --- /dev/null +++ b/doc/board/socionext/developerbox.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Introduction +============ + +DeveloperBox is a certified 96boards Enterprise Edition board. The board/SoC has: - + +* Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor motherboard +* 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default) +* 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots + (1x slots are connected via PCIe bridge chip) +* 4 USB-3.0 ports +* 2 SATA ports +* 1 GbE network port +* 1 USB-UART serial port (micro USB) +* 64MB SPI NOR Flash +* 8GB eMMC Flash Storage +* 96boards LS connector + +The DeveloperBox schematic can be found here: - +https://www.96boards.org/documentation/enterprise/developerbox/hardware-docs/mzsc2am_v03_20180115_a.pdf + +And the other documents can be found here: - +https://www.96boards.org/documentation/enterprise/developerbox/ + + +Currently, the U-Boot port supports: - + +* USB +* eMMC +* SPI-NOR +* SATA +* GbE + +The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default. +The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as +BL33, but no need to combine with it. + +Compile from source +=================== + +You can build U-Boot without any additinal source code.:: + + cd u-boot + export ARCH=arm64 + export CROSS_COMPILE=aarch64-linux-gnu- + make SynQuacer_defconfig + make -j `noproc` + +Then, expand the binary to 1MB for preparing flash.:: + + cp u-boot.bin SPI_NOR_UBOOT.fd + truncate -s 1M SPI_NOR_UBOOT.fd + +Installation +============ + +You can install the SNI_NOR_UBOOT.fd via NOR flash writer. + +Flashing the U-Boot image on DeveloperBox requires a 96boards UART mezzanine or other mezzanine which can connect to LS-UART0 port. +Connect USB cable from host to the LS-UART0 and set DSW2-7 to ON, and turn the board on again. The flash writer program will be started automatically; don?t forget to turn the DSW2-7 off again after flashing. + +*!!CAUTION!! If you failed to write the U-Boot image on wrong address, the board can be bricked. See below page if you need to recover the bricked board. See the following page for more detail* + +https://www.96boards.org/documentation/enterprise/developerbox/installation/board-recovery.md.html + +When the serial flasher is running correctly is will show the following boot messages shown via LS-UART0:: + + + /*------------------------------------------*/ + /* SC2A11 "SynQuacer" series Flash writer */ + /* */ + /* Version: cd254ac */ + /* Build: 12/15/17 11:25:45 */ + /*------------------------------------------*/ + + Command Input > + +Once the flasher tool is running we are ready flash the UEFI image:: + + flash rawwrite 200000 100000 + >> Send SPI_NOR_UBOOT.fd via XMODEM (Control-A S in minicom) << + +*!!NOTE!! The flasher command parameter is different from the command for board recovery. U-Boot uses the offset 200000 (2-five-0, 2M in hex) and the size 100000 (1-five-0, 1M in hex).* + +After transferring the SPI_NOR_UBOOT.fd, turn off the DSW2-7 and reset the board. + diff --git a/doc/board/socionext/index.rst b/doc/board/socionext/index.rst new file mode 100644 index 0000000000..4673dcc45b --- /dev/null +++ b/doc/board/socionext/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Socionext +========= + +.. toctree:: + :maxdepth: 2 + + developerbox diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h new file mode 100644 index 0000000000..b2dd6d0f0f --- /dev/null +++ b/include/configs/synquacer.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016-2017 Socionext Inc. + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Timers for fasp(TIMCLK) */ +#define CONFIG_SYS_HZ 1000 /* 1 msec */ +#define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */ + +/* + * SDRAM (for initialize) + */ +#define CONFIG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */ +#define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */ + +#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */ +#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE + +#define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */ + +/* + * Boot info + */ +#define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */ +#define CONFIG_SYS_MALLOC_LEN (0x01000000) /* 16Mbyte size of malloc() */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default kernel load address */ + +/* + * Hardware drivers support + */ + +/* Serial (pl011) */ +#define UART_CLK (62500000) +#define CONFIG_SERIAL_MULTI +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK UART_CLK +#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)} + +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ + +/* Support MTD */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BASE (0x08000000) +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024)) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 128 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ +/* #define CONFIG_SYS_PCI_64BIT 1 */ + +/* Distro boot settings */ +#ifndef CONFIG_SPL_BUILD +#ifdef CONFIG_CMD_USB +#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0) +#else +#define BOOT_TARGET_DEVICE_USB(func) +#endif + +#ifdef CONFIG_CMD_MMC +#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) +#else +#define BOOT_TARGET_DEVICE_MMC(func) +#endif + +#ifdef CONFIG_CMD_NVME +#define BOOT_TARGET_DEVICE_NVME(func) func(NVME, nvme, 0) +#else +#define BOOT_TARGET_DEVICE_NVME(func) +#endif + +#ifdef CONFIG_CMD_SCSI +#define BOOT_TARGET_DEVICE_SCSI(func) func(SCSI, scsi, 0) func(SCSI, scsi, 1) +#else +#define BOOT_TARGET_DEVICE_SCSI(func) +#endif + +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICE_USB(func) \ + BOOT_TARGET_DEVICE_MMC(func) \ + BOOT_TARGET_DEVICE_SCSI(func) \ + BOOT_TARGET_DEVICE_NVME(func) \ + +#include +#else /* CONFIG_SPL_BUILD */ +#define BOOTENV +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_addr_r=0x9fe00000\0" \ + "kernel_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "scriptaddr=0x88000000\0" \ + "pxefile_addr_r=0x88100000\0" \ + BOOTENV + +#endif /* __CONFIG_H */