All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guangbin Huang <huangguangbin2@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>, <xie.he.0141@gmail.com>,
	<ms@dev.tdt.de>, <willemb@google.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<lipeng321@huawei.com>, <tanhuazhong@huawei.com>,
	<huangguangbin2@huawei.com>
Subject: [PATCH net-next 4/6] net: wan: remove redundant blank lines
Date: Fri, 21 May 2021 09:08:15 +0800	[thread overview]
Message-ID: <1621559297-9651-5-git-send-email-huangguangbin2@huawei.com> (raw)
In-Reply-To: <1621559297-9651-1-git-send-email-huangguangbin2@huawei.com>

From: Peng Li <lipeng321@huawei.com>

This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
 drivers/net/wan/hd64572.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index aa69bcaba633..34acea93efdf 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -81,14 +81,12 @@ static inline u16 desc_abs_number(port_t *port, u16 desc, int transmit)
 	return port->chan * (rx_buffs + tx_buffs) + transmit * rx_buffs + desc;
 }
 
-
 static inline u16 desc_offset(port_t *port, u16 desc, int transmit)
 {
 	/* Descriptor offset always fits in 16 bits */
 	return desc_abs_number(port, desc, transmit) * sizeof(pkt_desc);
 }
 
-
 static inline pkt_desc __iomem *desc_address(port_t *port, u16 desc,
 					     int transmit)
 {
@@ -96,14 +94,12 @@ static inline pkt_desc __iomem *desc_address(port_t *port, u16 desc,
 				    desc_offset(port, desc, transmit));
 }
 
-
 static inline u32 buffer_offset(port_t *port, u16 desc, int transmit)
 {
 	return port->card->buff_offset +
 		desc_abs_number(port, desc, transmit) * (u32)HDLC_MAX_MRU;
 }
 
-
 static inline void sca_set_carrier(port_t *port)
 {
 	if (!(sca_in(get_msci(port) + ST3, port->card) & ST3_DCD)) {
@@ -121,7 +117,6 @@ static inline void sca_set_carrier(port_t *port)
 	}
 }
 
-
 static void sca_init_port(port_t *port)
 {
 	card_t *card = port->card;
@@ -181,7 +176,6 @@ static void sca_init_port(port_t *port)
 	netif_napi_add(port->netdev, &port->napi, sca_poll, NAPI_WEIGHT);
 }
 
-
 /* MSCI interrupt service */
 static inline void sca_msci_intr(port_t *port)
 {
@@ -195,7 +189,6 @@ static inline void sca_msci_intr(port_t *port)
 	}
 }
 
-
 static inline void sca_rx(card_t *card, port_t *port, pkt_desc __iomem *desc,
 			  u16 rxin)
 {
@@ -225,7 +218,6 @@ static inline void sca_rx(card_t *card, port_t *port, pkt_desc __iomem *desc,
 	netif_receive_skb(skb);
 }
 
-
 /* Receive DMA service */
 static inline int sca_rx_done(port_t *port, int budget)
 {
@@ -281,7 +273,6 @@ static inline int sca_rx_done(port_t *port, int budget)
 	return received;
 }
 
-
 /* Transmit DMA service */
 static inline void sca_tx_done(port_t *port)
 {
@@ -321,7 +312,6 @@ static inline void sca_tx_done(port_t *port)
 	spin_unlock(&port->lock);
 }
 
-
 static int sca_poll(struct napi_struct *napi, int budget)
 {
 	port_t *port = container_of(napi, port_t, napi);
@@ -363,7 +353,6 @@ static irqreturn_t sca_intr(int irq, void *dev_id)
 	return IRQ_RETVAL(handled);
 }
 
-
 static void sca_set_port(port_t *port)
 {
 	card_t *card = port->card;
@@ -371,7 +360,6 @@ static void sca_set_port(port_t *port)
 	u8 md2 = sca_in(msci + MD2, card);
 	unsigned int tmc, br = 10, brv = 1024;
 
-
 	if (port->settings.clock_rate > 0) {
 		/* Try lower br for better accuracy*/
 		do {
@@ -414,10 +402,8 @@ static void sca_set_port(port_t *port)
 		md2 &= ~MD2_LOOPBACK;
 
 	sca_out(md2, msci + MD2, card);
-
 }
 
-
 static void sca_open(struct net_device *dev)
 {
 	port_t *port = dev_to_port(dev);
@@ -494,7 +480,6 @@ static void sca_open(struct net_device *dev)
 	netif_start_queue(dev);
 }
 
-
 static void sca_close(struct net_device *dev)
 {
 	port_t *port = dev_to_port(dev);
@@ -506,7 +491,6 @@ static void sca_close(struct net_device *dev)
 	netif_stop_queue(dev);
 }
 
-
 static int sca_attach(struct net_device *dev, unsigned short encoding,
 		      unsigned short parity)
 {
@@ -529,7 +513,6 @@ static int sca_attach(struct net_device *dev, unsigned short encoding,
 	return 0;
 }
 
-
 #ifdef DEBUG_RINGS
 static void sca_dump_rings(struct net_device *dev)
 {
@@ -576,7 +559,6 @@ static void sca_dump_rings(struct net_device *dev)
 }
 #endif /* DEBUG_RINGS */
 
-
 static netdev_tx_t sca_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	port_t *port = dev_to_port(dev);
@@ -618,7 +600,6 @@ static netdev_tx_t sca_xmit(struct sk_buff *skb, struct net_device *dev)
 	return NETDEV_TX_OK;
 }
 
-
 static u32 sca_detect_ram(card_t *card, u8 __iomem *rambase, u32 ramsize)
 {
 	/* Round RAM size to 32 bits, fill from end to start */
@@ -637,7 +618,6 @@ static u32 sca_detect_ram(card_t *card, u8 __iomem *rambase, u32 ramsize)
 	return i;
 }
 
-
 static void sca_init(card_t *card, int wait_states)
 {
 	sca_out(wait_states, WCRL, card); /* Wait Control */
-- 
2.8.1


  parent reply	other threads:[~2021-05-21  1:11 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21  1:08 [PATCH net-next 0/6] net: wan: clean up some code style issues Guangbin Huang
2021-05-21  1:08 ` [PATCH net-next 1/6] net: wan: fix an code style issue about "foo* bar" Guangbin Huang
2021-05-21  1:08 ` [PATCH net-next 2/6] net: wan: add some required spaces Guangbin Huang
2021-05-21  1:08 ` [PATCH net-next 3/6] net: wan: fix the code style issue about trailing statements Guangbin Huang
2021-05-21  1:08 ` Guangbin Huang [this message]
2021-05-21  1:08 ` [PATCH net-next 5/6] net: wan: add braces {} to all arms of the statement Guangbin Huang
2021-05-21  1:08 ` [PATCH net-next 6/6] net: wan: add necessary () to macro argument Guangbin Huang
2021-05-21 20:40 ` [PATCH net-next 0/6] net: wan: clean up some code style issues patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1621559297-9651-5-git-send-email-huangguangbin2@huawei.com \
    --to=huangguangbin2@huawei.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lipeng321@huawei.com \
    --cc=ms@dev.tdt.de \
    --cc=netdev@vger.kernel.org \
    --cc=tanhuazhong@huawei.com \
    --cc=willemb@google.com \
    --cc=xie.he.0141@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.