* [PATCH v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema
@ 2021-05-21 12:21 ` Oleksij Rempel
0 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2021-05-21 12:21 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Rob Herring
Cc: Oleksij Rempel, kernel, linux-kernel, linux-arm-kernel,
devicetree, alsa-devel, Liam Girdwood, Mark Brown, Fabio Estevam,
NXP Linux Team
Convert the imx-audmux binding to DT schema format using json-schema
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
.../devicetree/bindings/sound/imx-audmux.txt | 28 -----
.../devicetree/bindings/sound/imx-audmux.yaml | 119 ++++++++++++++++++
2 files changed, 119 insertions(+), 28 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.txt
create mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.yaml
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt
deleted file mode 100644
index 2db4dcbee1b9..000000000000
--- a/Documentation/devicetree/bindings/sound/imx-audmux.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Freescale Digital Audio Mux (AUDMUX) device
-
-Required properties:
-
- - compatible : "fsl,imx21-audmux" for AUDMUX version firstly used
- on i.MX21, or "fsl,imx31-audmux" for the version
- firstly used on i.MX31.
-
- - reg : Should contain AUDMUX registers location and length.
-
-An initial configuration can be setup using child nodes.
-
-Required properties of optional child nodes:
-
- - fsl,audmux-port : Integer of the audmux port that is configured by this
- child node.
-
- - fsl,port-config : List of configuration options for the specific port.
- For imx31-audmux and above, it is a list of tuples
- <ptcr pdcr>. For imx21-audmux it is a list of pcr
- values.
-
-Example:
-
-audmux@21d8000 {
- compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
- reg = <0x021d8000 0x4000>;
-};
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.yaml b/Documentation/devicetree/bindings/sound/imx-audmux.yaml
new file mode 100644
index 000000000000..6078ce13bd46
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Digital Audio Mux device
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx27-audmux
+ - const: fsl,imx21-audmux
+ - items:
+ - enum:
+ - fsl,imx25-audmux
+ - fsl,imx35-audmux
+ - fsl,imx50-audmux
+ - fsl,imx51-audmux
+ - fsl,imx53-audmux
+ - fsl,imx6q-audmux
+ - fsl,imx6sl-audmux
+ - fsl,imx6sll-audmux
+ - fsl,imx6sx-audmux
+ - const: fsl,imx31-audmux
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: audmux
+
+patternProperties:
+ "^mux-[0-9a-z]*$":
+ type: object
+ properties:
+ fsl,audmux-port:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Integer of the audmux port that is configured by this child node
+
+ fsl,port-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ List of configuration options for the specific port.
+ For imx31-audmux and above, it is a list of tuples ptcr pdcr.
+ For imx21-audmux it is a list of pcr values.
+
+ required:
+ - fsl,audmux-port
+ - fsl,port-config
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ audmux@21d8000 {
+ compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ };
+ - |
+ audmux@10016000 {
+ compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+ reg = <0x10016000 0x1000>;
+ clocks = <&clks 1>;
+ clock-names = "audmux";
+
+ mux-ssi0 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <0xcb205000>;
+ };
+
+ mux-pins4 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <0x00001000>;
+ };
+ };
+ - |
+ #include <dt-bindings/sound/fsl-imx-audmux.h>
+ audmux@21d8000 {
+ compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+
+ mux-ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN 0
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TFSDIR 0
+ IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ mux-pins3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ 0 IMX_AUDMUX_V2_PDCR_TXRXEN
+ >;
+ };
+ };
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema
@ 2021-05-21 12:21 ` Oleksij Rempel
0 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2021-05-21 12:21 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Rob Herring
Cc: devicetree, alsa-devel, linux-kernel, Liam Girdwood,
Oleksij Rempel, Mark Brown, NXP Linux Team, kernel,
Fabio Estevam, linux-arm-kernel
Convert the imx-audmux binding to DT schema format using json-schema
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
.../devicetree/bindings/sound/imx-audmux.txt | 28 -----
.../devicetree/bindings/sound/imx-audmux.yaml | 119 ++++++++++++++++++
2 files changed, 119 insertions(+), 28 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.txt
create mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.yaml
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt
deleted file mode 100644
index 2db4dcbee1b9..000000000000
--- a/Documentation/devicetree/bindings/sound/imx-audmux.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Freescale Digital Audio Mux (AUDMUX) device
-
-Required properties:
-
- - compatible : "fsl,imx21-audmux" for AUDMUX version firstly used
- on i.MX21, or "fsl,imx31-audmux" for the version
- firstly used on i.MX31.
-
- - reg : Should contain AUDMUX registers location and length.
-
-An initial configuration can be setup using child nodes.
-
-Required properties of optional child nodes:
-
- - fsl,audmux-port : Integer of the audmux port that is configured by this
- child node.
-
- - fsl,port-config : List of configuration options for the specific port.
- For imx31-audmux and above, it is a list of tuples
- <ptcr pdcr>. For imx21-audmux it is a list of pcr
- values.
-
-Example:
-
-audmux@21d8000 {
- compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
- reg = <0x021d8000 0x4000>;
-};
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.yaml b/Documentation/devicetree/bindings/sound/imx-audmux.yaml
new file mode 100644
index 000000000000..6078ce13bd46
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Digital Audio Mux device
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx27-audmux
+ - const: fsl,imx21-audmux
+ - items:
+ - enum:
+ - fsl,imx25-audmux
+ - fsl,imx35-audmux
+ - fsl,imx50-audmux
+ - fsl,imx51-audmux
+ - fsl,imx53-audmux
+ - fsl,imx6q-audmux
+ - fsl,imx6sl-audmux
+ - fsl,imx6sll-audmux
+ - fsl,imx6sx-audmux
+ - const: fsl,imx31-audmux
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: audmux
+
+patternProperties:
+ "^mux-[0-9a-z]*$":
+ type: object
+ properties:
+ fsl,audmux-port:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Integer of the audmux port that is configured by this child node
+
+ fsl,port-config:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ List of configuration options for the specific port.
+ For imx31-audmux and above, it is a list of tuples ptcr pdcr.
+ For imx21-audmux it is a list of pcr values.
+
+ required:
+ - fsl,audmux-port
+ - fsl,port-config
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ audmux@21d8000 {
+ compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ };
+ - |
+ audmux@10016000 {
+ compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+ reg = <0x10016000 0x1000>;
+ clocks = <&clks 1>;
+ clock-names = "audmux";
+
+ mux-ssi0 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <0xcb205000>;
+ };
+
+ mux-pins4 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <0x00001000>;
+ };
+ };
+ - |
+ #include <dt-bindings/sound/fsl-imx-audmux.h>
+ audmux@21d8000 {
+ compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+
+ mux-ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN 0
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TFSDIR 0
+ IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ mux-pins3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ 0 IMX_AUDMUX_V2_PDCR_TXRXEN
+ >;
+ };
+ };
--
2.29.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema
2021-05-21 12:21 ` Oleksij Rempel
(?)
@ 2021-05-21 13:12 ` Rob Herring
-1 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-05-21 13:12 UTC (permalink / raw)
To: Oleksij Rempel
Cc: linux-kernel, alsa-devel, Liam Girdwood, Rob Herring,
Sascha Hauer, Shawn Guo, Fabio Estevam, NXP Linux Team, kernel,
devicetree, Mark Brown, linux-arm-kernel
On Fri, 21 May 2021 14:21:29 +0200, Oleksij Rempel wrote:
> Convert the imx-audmux binding to DT schema format using json-schema
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../devicetree/bindings/sound/imx-audmux.txt | 28 -----
> .../devicetree/bindings/sound/imx-audmux.yaml | 119 ++++++++++++++++++
> 2 files changed, 119 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.txt
> create mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:16:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:17:11: [warning] wrong indentation: expected 12 but found 10 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:20:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:21:11: [warning] wrong indentation: expected 12 but found 10 (indentation)
dtschema/dtc warnings/errors:
See https://patchwork.ozlabs.org/patch/1482202
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema
@ 2021-05-21 13:12 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-05-21 13:12 UTC (permalink / raw)
To: Oleksij Rempel
Cc: linux-kernel, alsa-devel, Liam Girdwood, Rob Herring,
Sascha Hauer, Shawn Guo, Fabio Estevam, NXP Linux Team, kernel,
devicetree, Mark Brown, linux-arm-kernel
On Fri, 21 May 2021 14:21:29 +0200, Oleksij Rempel wrote:
> Convert the imx-audmux binding to DT schema format using json-schema
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../devicetree/bindings/sound/imx-audmux.txt | 28 -----
> .../devicetree/bindings/sound/imx-audmux.yaml | 119 ++++++++++++++++++
> 2 files changed, 119 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.txt
> create mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:16:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:17:11: [warning] wrong indentation: expected 12 but found 10 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:20:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:21:11: [warning] wrong indentation: expected 12 but found 10 (indentation)
dtschema/dtc warnings/errors:
See https://patchwork.ozlabs.org/patch/1482202
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema
@ 2021-05-21 13:12 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-05-21 13:12 UTC (permalink / raw)
To: Oleksij Rempel
Cc: devicetree, alsa-devel, Fabio Estevam, Sascha Hauer,
linux-kernel, Liam Girdwood, Rob Herring, Mark Brown,
NXP Linux Team, kernel, Shawn Guo, linux-arm-kernel
On Fri, 21 May 2021 14:21:29 +0200, Oleksij Rempel wrote:
> Convert the imx-audmux binding to DT schema format using json-schema
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../devicetree/bindings/sound/imx-audmux.txt | 28 -----
> .../devicetree/bindings/sound/imx-audmux.yaml | 119 ++++++++++++++++++
> 2 files changed, 119 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.txt
> create mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:16:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:17:11: [warning] wrong indentation: expected 12 but found 10 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:20:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/sound/imx-audmux.yaml:21:11: [warning] wrong indentation: expected 12 but found 10 (indentation)
dtschema/dtc warnings/errors:
See https://patchwork.ozlabs.org/patch/1482202
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema
2021-05-21 12:21 ` Oleksij Rempel
(?)
@ 2021-05-21 15:43 ` Rob Herring
-1 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-05-21 15:43 UTC (permalink / raw)
To: Oleksij Rempel
Cc: Shawn Guo, Mark Brown, devicetree, Liam Girdwood, kernel,
Rob Herring, linux-kernel, linux-arm-kernel, alsa-devel,
NXP Linux Team, Sascha Hauer, Fabio Estevam
On Fri, 21 May 2021 14:21:29 +0200, Oleksij Rempel wrote:
> Convert the imx-audmux binding to DT schema format using json-schema
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../devicetree/bindings/sound/imx-audmux.txt | 28 -----
> .../devicetree/bindings/sound/imx-audmux.yaml | 119 ++++++++++++++++++
> 2 files changed, 119 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.txt
> create mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema
@ 2021-05-21 15:43 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-05-21 15:43 UTC (permalink / raw)
To: Oleksij Rempel
Cc: Shawn Guo, Mark Brown, devicetree, Liam Girdwood, kernel,
Rob Herring, linux-kernel, linux-arm-kernel, alsa-devel,
NXP Linux Team, Sascha Hauer, Fabio Estevam
On Fri, 21 May 2021 14:21:29 +0200, Oleksij Rempel wrote:
> Convert the imx-audmux binding to DT schema format using json-schema
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../devicetree/bindings/sound/imx-audmux.txt | 28 -----
> .../devicetree/bindings/sound/imx-audmux.yaml | 119 ++++++++++++++++++
> 2 files changed, 119 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.txt
> create mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1] ASoC: dt-bindings: Convert imx-audmux binding to json schema
@ 2021-05-21 15:43 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2021-05-21 15:43 UTC (permalink / raw)
To: Oleksij Rempel
Cc: devicetree, alsa-devel, Fabio Estevam, Mark Brown, Liam Girdwood,
linux-kernel, Rob Herring, NXP Linux Team, kernel, Shawn Guo,
Sascha Hauer, linux-arm-kernel
On Fri, 21 May 2021 14:21:29 +0200, Oleksij Rempel wrote:
> Convert the imx-audmux binding to DT schema format using json-schema
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../devicetree/bindings/sound/imx-audmux.txt | 28 -----
> .../devicetree/bindings/sound/imx-audmux.yaml | 119 ++++++++++++++++++
> 2 files changed, 119 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.txt
> create mode 100644 Documentation/devicetree/bindings/sound/imx-audmux.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 9+ messages in thread