[PATCH 0/3] crypto: hisilicon - supports new skciphers for new hardware

[PATCH 0/3] crypto: hisilicon - supports new skciphers for new hardware

[Kai Ye]

The driver adds new skciphers, add fallback tfm supporting for XTS mode.
The crypto fuzzing test has been passed. fixup 3des minimum key size declaration
that fuzz testing found.

Kai Ye (3):
  crypto: hisilicon/sec - add new skcipher mode for SEC
  crypto: hisilicon/sec - add fallback tfm supporting for XTS mode
  crypto: hisilicon/sec - fixup 3des minimum key size declaration

 drivers/crypto/hisilicon/sec2/sec.h        |   4 +
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 192 ++++++++++++++++++++++++++---
 drivers/crypto/hisilicon/sec2/sec_crypto.h |   3 +
 3 files changed, 182 insertions(+), 17 deletions(-)

-- 
2.8.1

[PATCH 1/3] crypto: hisilicon/sec - add new skcipher mode for SEC

[Kai Ye]

Add new skcipher algorithms for Kunpeng930 SEC:
OFB(AES), CFB(AES), CTR(AES),
OFB(SM4), CFB(SM4), CTR(SM4).

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
---
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 103 +++++++++++++++++++++++++----
 drivers/crypto/hisilicon/sec2/sec_crypto.h |   3 +
 2 files changed, 94 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index d9ab503..b399315 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -78,6 +78,9 @@
 #define SEC_SQE_CFLAG		2
 #define SEC_SQE_AEAD_FLAG	3
 #define SEC_SQE_DONE		0x1
+#define MAX_INPUT_DATA_LEN	0xFFFE00
+#define BITS_MASK		0xFF
+#define BYTE_BITS		0x8
 
 /* Get an en/de-cipher queue cyclically to balance load over queues of TFM */
 static inline int sec_alloc_queue_id(struct sec_ctx *ctx, struct sec_req *req)
@@ -751,12 +754,16 @@ static int sec_setkey_##name(struct crypto_skcipher *tfm, const u8 *key,\
 GEN_SEC_SETKEY_FUNC(aes_ecb, SEC_CALG_AES, SEC_CMODE_ECB)
 GEN_SEC_SETKEY_FUNC(aes_cbc, SEC_CALG_AES, SEC_CMODE_CBC)
 GEN_SEC_SETKEY_FUNC(aes_xts, SEC_CALG_AES, SEC_CMODE_XTS)
-
+GEN_SEC_SETKEY_FUNC(aes_ofb, SEC_CALG_AES, SEC_CMODE_OFB)
+GEN_SEC_SETKEY_FUNC(aes_cfb, SEC_CALG_AES, SEC_CMODE_CFB)
+GEN_SEC_SETKEY_FUNC(aes_ctr, SEC_CALG_AES, SEC_CMODE_CTR)
 GEN_SEC_SETKEY_FUNC(3des_ecb, SEC_CALG_3DES, SEC_CMODE_ECB)
 GEN_SEC_SETKEY_FUNC(3des_cbc, SEC_CALG_3DES, SEC_CMODE_CBC)
-
 GEN_SEC_SETKEY_FUNC(sm4_xts, SEC_CALG_SM4, SEC_CMODE_XTS)
 GEN_SEC_SETKEY_FUNC(sm4_cbc, SEC_CALG_SM4, SEC_CMODE_CBC)
+GEN_SEC_SETKEY_FUNC(sm4_ofb, SEC_CALG_SM4, SEC_CMODE_OFB)
+GEN_SEC_SETKEY_FUNC(sm4_cfb, SEC_CALG_SM4, SEC_CMODE_CFB)
+GEN_SEC_SETKEY_FUNC(sm4_ctr, SEC_CALG_SM4, SEC_CMODE_CTR)
 
 static int sec_cipher_pbuf_map(struct sec_ctx *ctx, struct sec_req *req,
 			struct scatterlist *src)
@@ -1154,6 +1161,17 @@ static int sec_skcipher_bd_fill_v3(struct sec_ctx *ctx, struct sec_req *req)
 	return 0;
 }
 
+/* increment counter (128-bit int) */
+static void ctr_iv_inc(__u8 *counter, __u8 bits, __u32 nums)
+{
+	do {
+		--bits;
+		nums += counter[bits];
+		counter[bits] = nums & BITS_MASK;
+		nums >>= BYTE_BITS;
+	} while (bits && nums);
+}
+
 static void sec_update_iv(struct sec_req *req, enum sec_alg_type alg_type)
 {
 	struct aead_request *aead_req = req->aead_req.aead_req;
@@ -1177,10 +1195,17 @@ static void sec_update_iv(struct sec_req *req, enum sec_alg_type alg_type)
 		cryptlen = aead_req->cryptlen;
 	}
 
-	sz = sg_pcopy_to_buffer(sgl, sg_nents(sgl), iv, iv_size,
-				cryptlen - iv_size);
-	if (unlikely(sz != iv_size))
-		dev_err(req->ctx->dev, "copy output iv error!\n");
+	if (req->ctx->c_ctx.c_mode == SEC_CMODE_CBC) {
+		sz = sg_pcopy_to_buffer(sgl, sg_nents(sgl), iv, iv_size,
+					cryptlen - iv_size);
+		if (unlikely(sz != iv_size))
+			dev_err(req->ctx->dev, "copy output iv error!\n");
+	} else {
+		sz = cryptlen / iv_size;
+		if (cryptlen % iv_size)
+			sz += 1;
+		ctr_iv_inc(iv, iv_size, sz);
+	}
 }
 
 static struct sec_req *sec_back_req_clear(struct sec_ctx *ctx,
@@ -1211,8 +1236,9 @@ static void sec_skcipher_callback(struct sec_ctx *ctx, struct sec_req *req,
 
 	sec_free_req_id(req);
 
-	/* IV output at encrypto of CBC mode */
-	if (!err && ctx->c_ctx.c_mode == SEC_CMODE_CBC && req->c_req.encrypt)
+	/* IV output at encrypto of CBC/CTR mode */
+	if (!err && (ctx->c_ctx.c_mode == SEC_CMODE_CBC ||
+	    ctx->c_ctx.c_mode == SEC_CMODE_CTR) && req->c_req.encrypt)
 		sec_update_iv(req, SEC_SKCIPHER);
 
 	while (1) {
@@ -1422,7 +1448,8 @@ static int sec_process(struct sec_ctx *ctx, struct sec_req *req)
 		goto err_uninit_req;
 
 	/* Output IV as decrypto */
-	if (ctx->c_ctx.c_mode == SEC_CMODE_CBC && !req->c_req.encrypt)
+	if (!req->c_req.encrypt && (ctx->c_ctx.c_mode == SEC_CMODE_CBC ||
+	    ctx->c_ctx.c_mode == SEC_CMODE_CTR))
 		sec_update_iv(req, ctx->alg_type);
 
 	ret = ctx->req_op->bd_send(ctx, req);
@@ -1634,6 +1661,14 @@ static int sec_skcipher_cryptlen_ckeck(struct sec_ctx *ctx,
 			ret = -EINVAL;
 		}
 		break;
+	case SEC_CMODE_CFB:
+	case SEC_CMODE_OFB:
+	case SEC_CMODE_CTR:
+		if (unlikely(ctx->sec->qm.ver < QM_HW_V3)) {
+			dev_err(dev, "skcipher HW version error!\n");
+			ret = -EINVAL;
+		}
+		break;
 	default:
 		ret = -EINVAL;
 	}
@@ -1647,7 +1682,8 @@ static int sec_skcipher_param_check(struct sec_ctx *ctx, struct sec_req *sreq)
 	struct device *dev = ctx->dev;
 	u8 c_alg = ctx->c_ctx.c_alg;
 
-	if (unlikely(!sk_req->src || !sk_req->dst)) {
+	if (unlikely(!sk_req->src || !sk_req->dst ||
+		     sk_req->cryptlen > MAX_INPUT_DATA_LEN)) {
 		dev_err(dev, "skcipher input param error!\n");
 		return -EINVAL;
 	}
@@ -1762,6 +1798,32 @@ static struct skcipher_alg sec_skciphers[] = {
 			 AES_BLOCK_SIZE, AES_BLOCK_SIZE)
 };
 
+static struct skcipher_alg sec_skciphers_v3[] = {
+	SEC_SKCIPHER_ALG("ofb(aes)", sec_setkey_aes_ofb,
+			 AES_MIN_KEY_SIZE, AES_MAX_KEY_SIZE,
+			 SEC_MIN_BLOCK_SZ, AES_BLOCK_SIZE)
+
+	SEC_SKCIPHER_ALG("cfb(aes)", sec_setkey_aes_cfb,
+			 AES_MIN_KEY_SIZE, AES_MAX_KEY_SIZE,
+			 SEC_MIN_BLOCK_SZ, AES_BLOCK_SIZE)
+
+	SEC_SKCIPHER_ALG("ctr(aes)", sec_setkey_aes_ctr,
+			 AES_MIN_KEY_SIZE, AES_MAX_KEY_SIZE,
+			 SEC_MIN_BLOCK_SZ, AES_BLOCK_SIZE)
+
+	SEC_SKCIPHER_ALG("ofb(sm4)", sec_setkey_sm4_ofb,
+			 AES_MIN_KEY_SIZE, AES_MIN_KEY_SIZE,
+			 SEC_MIN_BLOCK_SZ, AES_BLOCK_SIZE)
+
+	SEC_SKCIPHER_ALG("cfb(sm4)", sec_setkey_sm4_cfb,
+			 AES_MIN_KEY_SIZE, AES_MIN_KEY_SIZE,
+			 SEC_MIN_BLOCK_SZ, AES_BLOCK_SIZE)
+
+	SEC_SKCIPHER_ALG("ctr(sm4)", sec_setkey_sm4_ctr,
+			 AES_MIN_KEY_SIZE, AES_MIN_KEY_SIZE,
+			 SEC_MIN_BLOCK_SZ, AES_BLOCK_SIZE)
+};
+
 static int sec_aead_param_check(struct sec_ctx *ctx, struct sec_req *sreq)
 {
 	struct aead_request *req = sreq->aead_req.aead_req;
@@ -1878,15 +1940,32 @@ int sec_register_to_crypto(struct hisi_qm *qm)
 	if (ret)
 		return ret;
 
+	if (qm->ver > QM_HW_V2) {
+		ret = crypto_register_skciphers(sec_skciphers_v3,
+						ARRAY_SIZE(sec_skciphers_v3));
+		if (ret)
+			goto reg_skcipher_fail;
+	}
 	ret = crypto_register_aeads(sec_aeads, ARRAY_SIZE(sec_aeads));
 	if (ret)
-		crypto_unregister_skciphers(sec_skciphers,
-					    ARRAY_SIZE(sec_skciphers));
+		goto reg_aead_fail;
+	return ret;
+
+reg_aead_fail:
+	if (qm->ver > QM_HW_V2)
+		crypto_unregister_skciphers(sec_skciphers_v3,
+					    ARRAY_SIZE(sec_skciphers_v3));
+reg_skcipher_fail:
+	crypto_unregister_skciphers(sec_skciphers,
+				    ARRAY_SIZE(sec_skciphers));
 	return ret;
 }
 
 void sec_unregister_from_crypto(struct hisi_qm *qm)
 {
+	if (qm->ver > QM_HW_V2)
+		crypto_unregister_skciphers(sec_skciphers_v3,
+					    ARRAY_SIZE(sec_skciphers_v3));
 	crypto_unregister_skciphers(sec_skciphers,
 				    ARRAY_SIZE(sec_skciphers));
 	crypto_unregister_aeads(sec_aeads, ARRAY_SIZE(sec_aeads));
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.h b/drivers/crypto/hisilicon/sec2/sec_crypto.h
index 163e813..c9bfe75 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.h
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.h
@@ -7,6 +7,7 @@
 #define SEC_IV_SIZE		24
 #define SEC_MAX_KEY_SIZE	64
 #define SEC_COMM_SCENE		0
+#define SEC_MIN_BLOCK_SZ	1
 
 enum sec_calg {
 	SEC_CALG_3DES = 0x1,
@@ -29,6 +30,8 @@ enum sec_mac_len {
 enum sec_cmode {
 	SEC_CMODE_ECB    = 0x0,
 	SEC_CMODE_CBC    = 0x1,
+	SEC_CMODE_CFB    = 0x2,
+	SEC_CMODE_OFB    = 0x3,
 	SEC_CMODE_CTR    = 0x4,
 	SEC_CMODE_XTS    = 0x7,
 };
-- 
2.8.1

[PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[Kai Ye]

Add fallback tfm supporting for hisi_sec driver. Due to the hardware
not supports 192bit key length when using XTS mode. So the driver needs
to setting the soft fallback skcipher tfm for user.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec.h        |  4 ++
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 85 ++++++++++++++++++++++++++++--
 2 files changed, 86 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec.h b/drivers/crypto/hisilicon/sec2/sec.h
index 14ba66d..935d8d9 100644
--- a/drivers/crypto/hisilicon/sec2/sec.h
+++ b/drivers/crypto/hisilicon/sec2/sec.h
@@ -97,6 +97,10 @@ struct sec_cipher_ctx {
 	u8 c_mode;
 	u8 c_alg;
 	u8 c_key_len;
+
+	/* add software support */
+	bool fallback;
+	struct crypto_sync_skcipher *fbtfm;
 };
 
 /* SEC queue context which defines queue's relatives */
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index b399315..25da33a 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -21,6 +21,7 @@
 
 #define SEC_PRIORITY		4001
 #define SEC_XTS_MIN_KEY_SIZE	(2 * AES_MIN_KEY_SIZE)
+#define SEC_XTS_MID_KEY_SIZE	(3 * AES_MIN_KEY_SIZE)
 #define SEC_XTS_MAX_KEY_SIZE	(2 * AES_MAX_KEY_SIZE)
 #define SEC_DES3_2KEY_SIZE	(2 * DES_KEY_SIZE)
 #define SEC_DES3_3KEY_SIZE	(3 * DES_KEY_SIZE)
@@ -81,6 +82,7 @@
 #define MAX_INPUT_DATA_LEN	0xFFFE00
 #define BITS_MASK		0xFF
 #define BYTE_BITS		0x8
+#define SEC_XTS_NAME_SZ		0x3
 
 /* Get an en/de-cipher queue cyclically to balance load over queues of TFM */
 static inline int sec_alloc_queue_id(struct sec_ctx *ctx, struct sec_req *req)
@@ -598,6 +600,26 @@ static void sec_auth_uninit(struct sec_ctx *ctx)
 			  a_ctx->a_key, a_ctx->a_key_dma);
 }
 
+static int sec_skcipher_fbtfm_init(struct crypto_skcipher *tfm)
+{
+	const char *alg = crypto_tfm_alg_name(&tfm->base);
+	struct sec_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct sec_cipher_ctx *c_ctx = &ctx->c_ctx;
+
+	c_ctx->fallback = false;
+	if (likely(strncmp(alg, "xts", SEC_XTS_NAME_SZ)))
+		return 0;
+
+	c_ctx->fbtfm = crypto_alloc_sync_skcipher(alg, 0,
+						  CRYPTO_ALG_NEED_FALLBACK);
+	if (IS_ERR(c_ctx->fbtfm)) {
+		pr_err("failed to alloc fallback tfm!\n");
+		return PTR_ERR(c_ctx->fbtfm);
+	}
+
+	return 0;
+}
+
 static int sec_skcipher_init(struct crypto_skcipher *tfm)
 {
 	struct sec_ctx *ctx = crypto_skcipher_ctx(tfm);
@@ -619,8 +641,14 @@ static int sec_skcipher_init(struct crypto_skcipher *tfm)
 	if (ret)
 		goto err_cipher_init;
 
+	ret = sec_skcipher_fbtfm_init(tfm);
+	if (ret)
+		goto err_fbtfm_init;
+
 	return 0;
 
+err_fbtfm_init:
+	sec_cipher_uninit(ctx);
 err_cipher_init:
 	sec_ctx_base_uninit(ctx);
 	return ret;
@@ -630,6 +658,9 @@ static void sec_skcipher_uninit(struct crypto_skcipher *tfm)
 {
 	struct sec_ctx *ctx = crypto_skcipher_ctx(tfm);
 
+	if (ctx->c_ctx.fbtfm)
+		crypto_free_sync_skcipher(ctx->c_ctx.fbtfm);
+
 	sec_cipher_uninit(ctx);
 	sec_ctx_base_uninit(ctx);
 }
@@ -669,6 +700,9 @@ static int sec_skcipher_aes_sm4_setkey(struct sec_cipher_ctx *c_ctx,
 		case SEC_XTS_MIN_KEY_SIZE:
 			c_ctx->c_key_len = SEC_CKEY_128BIT;
 			break;
+		case SEC_XTS_MID_KEY_SIZE:
+			c_ctx->fallback = true;
+			break;
 		case SEC_XTS_MAX_KEY_SIZE:
 			c_ctx->c_key_len = SEC_CKEY_256BIT;
 			break;
@@ -740,7 +774,13 @@ static int sec_skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key,
 	}
 
 	memcpy(c_ctx->c_key, key, keylen);
-
+	if (c_ctx->fallback) {
+		ret = crypto_sync_skcipher_setkey(c_ctx->fbtfm, key, keylen);
+		if (ret) {
+			dev_err(dev, "failed to set fallback skcipher key!\n");
+			return ret;
+		}
+	}
 	return 0;
 }
 
@@ -1709,6 +1749,37 @@ static int sec_skcipher_param_check(struct sec_ctx *ctx, struct sec_req *sreq)
 	return -EINVAL;
 }
 
+static int sec_skcipher_soft_crypto(struct sec_ctx *ctx,
+				    struct skcipher_request *sreq, bool encrypt)
+{
+	struct sec_cipher_ctx *c_ctx = &ctx->c_ctx;
+	struct device *dev = ctx->dev;
+	int ret;
+
+	SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, c_ctx->fbtfm);
+
+	if (!c_ctx->fbtfm) {
+		dev_err(dev, "failed to check fallback tfm\n");
+		return -EINVAL;
+	}
+
+	skcipher_request_set_sync_tfm(subreq, c_ctx->fbtfm);
+
+	/* software need sync mode to do crypto */
+	skcipher_request_set_callback(subreq, sreq->base.flags,
+				      NULL, NULL);
+	skcipher_request_set_crypt(subreq, sreq->src, sreq->dst,
+				   sreq->cryptlen, sreq->iv);
+	if (encrypt)
+		ret = crypto_skcipher_encrypt(subreq);
+	else
+		ret = crypto_skcipher_decrypt(subreq);
+
+	skcipher_request_zero(subreq);
+
+	return ret;
+}
+
 static int sec_skcipher_crypto(struct skcipher_request *sk_req, bool encrypt)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(sk_req);
@@ -1716,8 +1787,11 @@ static int sec_skcipher_crypto(struct skcipher_request *sk_req, bool encrypt)
 	struct sec_ctx *ctx = crypto_skcipher_ctx(tfm);
 	int ret;
 
-	if (!sk_req->cryptlen)
+	if (!sk_req->cryptlen) {
+		if (ctx->c_ctx.c_mode == SEC_CMODE_XTS)
+			return -EINVAL;
 		return 0;
+	}
 
 	req->flag = sk_req->base.flags;
 	req->c_req.sk_req = sk_req;
@@ -1728,6 +1802,9 @@ static int sec_skcipher_crypto(struct skcipher_request *sk_req, bool encrypt)
 	if (unlikely(ret))
 		return -EINVAL;
 
+	if (unlikely(ctx->c_ctx.fallback))
+		return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
+
 	return ctx->req_op->process(ctx, req);
 }
 
@@ -1748,7 +1825,9 @@ static int sec_skcipher_decrypt(struct skcipher_request *sk_req)
 		.cra_name = sec_cra_name,\
 		.cra_driver_name = "hisi_sec_"sec_cra_name,\
 		.cra_priority = SEC_PRIORITY,\
-		.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_ALLOCATES_MEMORY,\
+		.cra_flags = CRYPTO_ALG_ASYNC |\
+		 CRYPTO_ALG_ALLOCATES_MEMORY |\
+		 CRYPTO_ALG_NEED_FALLBACK,\
 		.cra_blocksize = blk_size,\
 		.cra_ctxsize = sizeof(struct sec_ctx),\
 		.cra_module = THIS_MODULE,\
-- 
2.8.1

Re: [PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2915 bytes --]

Hi Kai,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on cryptodev/master]
[also build test ERROR on crypto/master linux/master linus/master v5.13-rc3 next-20210528]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
base:   https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master
config: ia64-allmodconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/60bae5ed49c53ea90c82125a8295fb72833a3b68
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
        git checkout 60bae5ed49c53ea90c82125a8295fb72833a3b68
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/crypto/hisilicon/sec2/sec_crypto.c: In function 'sec_aead_crypto':
>> drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: error: 'sk_req' undeclared (first use in this function); did you mean 'a_req'?
    1751 |   return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
         |                                        ^~~~~~
         |                                        a_req
   drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: note: each undeclared identifier is reported only once for each function it appears in


vim +1751 drivers/crypto/hisilicon/sec2/sec_crypto.c

  1733	
  1734	static int sec_aead_crypto(struct aead_request *a_req, bool encrypt)
  1735	{
  1736		struct crypto_aead *tfm = crypto_aead_reqtfm(a_req);
  1737		struct sec_req *req = aead_request_ctx(a_req);
  1738		struct sec_ctx *ctx = crypto_aead_ctx(tfm);
  1739		int ret;
  1740	
  1741		req->flag = a_req->base.flags;
  1742		req->aead_req.aead_req = a_req;
  1743		req->c_req.encrypt = encrypt;
  1744		req->ctx = ctx;
  1745	
  1746		ret = sec_aead_param_check(ctx, req);
  1747		if (unlikely(ret))
  1748			return -EINVAL;
  1749	
  1750		if (unlikely(ctx->c_ctx.fallback))
> 1751			return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
  1752	
  1753		return ctx->req_op->process(ctx, req);
  1754	}
  1755	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 64433 bytes --]

Re: [PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2983 bytes --]

Hi Kai,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on cryptodev/master]
[also build test ERROR on crypto/master linux/master linus/master v5.13-rc3 next-20210528]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
base:   https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master
config: ia64-allmodconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/60bae5ed49c53ea90c82125a8295fb72833a3b68
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
        git checkout 60bae5ed49c53ea90c82125a8295fb72833a3b68
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/crypto/hisilicon/sec2/sec_crypto.c: In function 'sec_aead_crypto':
>> drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: error: 'sk_req' undeclared (first use in this function); did you mean 'a_req'?
    1751 |   return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
         |                                        ^~~~~~
         |                                        a_req
   drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: note: each undeclared identifier is reported only once for each function it appears in


vim +1751 drivers/crypto/hisilicon/sec2/sec_crypto.c

  1733	
  1734	static int sec_aead_crypto(struct aead_request *a_req, bool encrypt)
  1735	{
  1736		struct crypto_aead *tfm = crypto_aead_reqtfm(a_req);
  1737		struct sec_req *req = aead_request_ctx(a_req);
  1738		struct sec_ctx *ctx = crypto_aead_ctx(tfm);
  1739		int ret;
  1740	
  1741		req->flag = a_req->base.flags;
  1742		req->aead_req.aead_req = a_req;
  1743		req->c_req.encrypt = encrypt;
  1744		req->ctx = ctx;
  1745	
  1746		ret = sec_aead_param_check(ctx, req);
  1747		if (unlikely(ret))
  1748			return -EINVAL;
  1749	
  1750		if (unlikely(ctx->c_ctx.fallback))
> 1751			return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
  1752	
  1753		return ctx->req_op->process(ctx, req);
  1754	}
  1755	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 64433 bytes --]

Re: [PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[yekai(A)]

On 2021/5/28 22:13, kernel test robot wrote:
> Hi Kai,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on cryptodev/master]
> [also build test ERROR on crypto/master linux/master linus/master v5.13-rc3 next-20210528]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
>
> url:    https://github.com/0day-ci/linux/commits/Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master
> config: ia64-allmodconfig (attached as .config)
> compiler: ia64-linux-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/60bae5ed49c53ea90c82125a8295fb72833a3b68
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>         git checkout 60bae5ed49c53ea90c82125a8295fb72833a3b68
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>    drivers/crypto/hisilicon/sec2/sec_crypto.c: In function 'sec_aead_crypto':
>>> drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: error: 'sk_req' undeclared (first use in this function); did you mean 'a_req'?
>     1751 |   return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>          |                                        ^~~~~~
>          |                                        a_req
>    drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: note: each undeclared identifier is reported only once for each function it appears in
>
>
> vim +1751 drivers/crypto/hisilicon/sec2/sec_crypto.c
>
>   1733	
>   1734	static int sec_aead_crypto(struct aead_request *a_req, bool encrypt)
>   1735	{
>   1736		struct crypto_aead *tfm = crypto_aead_reqtfm(a_req);
>   1737		struct sec_req *req = aead_request_ctx(a_req);
>   1738		struct sec_ctx *ctx = crypto_aead_ctx(tfm);
>   1739		int ret;
>   1740	
>   1741		req->flag = a_req->base.flags;
>   1742		req->aead_req.aead_req = a_req;
>   1743		req->c_req.encrypt = encrypt;
>   1744		req->ctx = ctx;
>   1745	
>   1746		ret = sec_aead_param_check(ctx, req);
>   1747		if (unlikely(ret))
>   1748			return -EINVAL;
>   1749	
>   1750		if (unlikely(ctx->c_ctx.fallback))
>> 1751			return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>   1752	
>   1753		return ctx->req_op->process(ctx, req);
>   1754	}
>   1755	
>
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
>


You shouldn't git am this patchset directly, because this patchset 
depends on previous patchset.
the series is "crypto: hisilicon - add new type of sqe for Kunpeng930",
the patchwork is 
https://patchwork.kernel.org/project/linux-crypto/list/?series=490143,
thank you
Kai

Re: [PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[yekai]

[-- Attachment #1: Type: text/plain, Size: 3437 bytes --]



On 2021/5/28 22:13, kernel test robot wrote:
> Hi Kai,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on cryptodev/master]
> [also build test ERROR on crypto/master linux/master linus/master v5.13-rc3 next-20210528]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
>
> url:    https://github.com/0day-ci/linux/commits/Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master
> config: ia64-allmodconfig (attached as .config)
> compiler: ia64-linux-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/60bae5ed49c53ea90c82125a8295fb72833a3b68
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>         git checkout 60bae5ed49c53ea90c82125a8295fb72833a3b68
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>    drivers/crypto/hisilicon/sec2/sec_crypto.c: In function 'sec_aead_crypto':
>>> drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: error: 'sk_req' undeclared (first use in this function); did you mean 'a_req'?
>     1751 |   return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>          |                                        ^~~~~~
>          |                                        a_req
>    drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: note: each undeclared identifier is reported only once for each function it appears in
>
>
> vim +1751 drivers/crypto/hisilicon/sec2/sec_crypto.c
>
>   1733	
>   1734	static int sec_aead_crypto(struct aead_request *a_req, bool encrypt)
>   1735	{
>   1736		struct crypto_aead *tfm = crypto_aead_reqtfm(a_req);
>   1737		struct sec_req *req = aead_request_ctx(a_req);
>   1738		struct sec_ctx *ctx = crypto_aead_ctx(tfm);
>   1739		int ret;
>   1740	
>   1741		req->flag = a_req->base.flags;
>   1742		req->aead_req.aead_req = a_req;
>   1743		req->c_req.encrypt = encrypt;
>   1744		req->ctx = ctx;
>   1745	
>   1746		ret = sec_aead_param_check(ctx, req);
>   1747		if (unlikely(ret))
>   1748			return -EINVAL;
>   1749	
>   1750		if (unlikely(ctx->c_ctx.fallback))
>> 1751			return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>   1752	
>   1753		return ctx->req_op->process(ctx, req);
>   1754	}
>   1755	
>
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
>


You shouldn't git am this patchset directly, because this patchset 
depends on previous patchset.
the series is "crypto: hisilicon - add new type of sqe for Kunpeng930",
the patchwork is 
https://patchwork.kernel.org/project/linux-crypto/list/?series=490143,
thank you
Kai

Re: [kbuild-all] Re: [PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[Rong Chen]

On 5/29/21 5:22 PM, yekai(A) wrote:
>
>
> On 2021/5/28 22:13, kernel test robot wrote:
>> Hi Kai,
>>
>> Thank you for the patch! Yet something to improve:
>>
>> [auto build test ERROR on cryptodev/master]
>> [also build test ERROR on crypto/master linux/master linus/master 
>> v5.13-rc3 next-20210528]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch]
>>
>> url: 
>> https://github.com/0day-ci/linux/commits/Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>> base: 
>> https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git 
>> master
>> config: ia64-allmodconfig (attached as .config)
>> compiler: ia64-linux-gcc (GCC) 9.3.0
>> reproduce (this is a W=1 build):
>>         wget 
>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross 
>> -O ~/bin/make.cross
>>         chmod +x ~/bin/make.cross
>>         # 
>> https://github.com/0day-ci/linux/commit/60bae5ed49c53ea90c82125a8295fb72833a3b68
>>         git remote add linux-review https://github.com/0day-ci/linux
>>         git fetch --no-tags linux-review 
>> Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>>         git checkout 60bae5ed49c53ea90c82125a8295fb72833a3b68
>>         # save the attached .config to linux build tree
>>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 
>> make.cross ARCH=ia64
>>
>> If you fix the issue, kindly add following tag as appropriate
>> Reported-by: kernel test robot <lkp@intel.com>
>>
>> All errors (new ones prefixed by >>):
>>
>>    drivers/crypto/hisilicon/sec2/sec_crypto.c: In function 
>> 'sec_aead_crypto':
>>>> drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: error: 'sk_req' 
>>>> undeclared (first use in this function); did you mean 'a_req'?
>>     1751 |   return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>>          |                                        ^~~~~~
>>          |                                        a_req
>>    drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: note: each 
>> undeclared identifier is reported only once for each function it 
>> appears in
>>
>>
>> vim +1751 drivers/crypto/hisilicon/sec2/sec_crypto.c
>>
>>   1733
>>   1734    static int sec_aead_crypto(struct aead_request *a_req, bool 
>> encrypt)
>>   1735    {
>>   1736        struct crypto_aead *tfm = crypto_aead_reqtfm(a_req);
>>   1737        struct sec_req *req = aead_request_ctx(a_req);
>>   1738        struct sec_ctx *ctx = crypto_aead_ctx(tfm);
>>   1739        int ret;
>>   1740
>>   1741        req->flag = a_req->base.flags;
>>   1742        req->aead_req.aead_req = a_req;
>>   1743        req->c_req.encrypt = encrypt;
>>   1744        req->ctx = ctx;
>>   1745
>>   1746        ret = sec_aead_param_check(ctx, req);
>>   1747        if (unlikely(ret))
>>   1748            return -EINVAL;
>>   1749
>>   1750        if (unlikely(ctx->c_ctx.fallback))
>>> 1751            return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>>   1752
>>   1753        return ctx->req_op->process(ctx, req);
>>   1754    }
>>   1755
>>
>> ---
>> 0-DAY CI Kernel Test Service, Intel Corporation
>> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
>>
>
>
> You shouldn't git am this patchset directly, because this patchset 
> depends on previous patchset.
> the series is "crypto: hisilicon - add new type of sqe for Kunpeng930",
> the patchwork is 
> https://patchwork.kernel.org/project/linux-crypto/list/?series=490143,
> thank you
> Kai

Hi Kai,

Thanks for the clarification, it could be very helpful for us if 
'--base' for git format-patch used or
there is a patchwork link in cover letter file.

Best Regards,
Rong Chen

Re: [PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[Rong Chen]

[-- Attachment #1: Type: text/plain, Size: 4217 bytes --]



On 5/29/21 5:22 PM, yekai(A) wrote:
>
>
> On 2021/5/28 22:13, kernel test robot wrote:
>> Hi Kai,
>>
>> Thank you for the patch! Yet something to improve:
>>
>> [auto build test ERROR on cryptodev/master]
>> [also build test ERROR on crypto/master linux/master linus/master 
>> v5.13-rc3 next-20210528]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch]
>>
>> url: 
>> https://github.com/0day-ci/linux/commits/Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>> base: 
>> https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git 
>> master
>> config: ia64-allmodconfig (attached as .config)
>> compiler: ia64-linux-gcc (GCC) 9.3.0
>> reproduce (this is a W=1 build):
>>         wget 
>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross 
>> -O ~/bin/make.cross
>>         chmod +x ~/bin/make.cross
>>         # 
>> https://github.com/0day-ci/linux/commit/60bae5ed49c53ea90c82125a8295fb72833a3b68
>>         git remote add linux-review https://github.com/0day-ci/linux
>>         git fetch --no-tags linux-review 
>> Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>>         git checkout 60bae5ed49c53ea90c82125a8295fb72833a3b68
>>         # save the attached .config to linux build tree
>>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 
>> make.cross ARCH=ia64
>>
>> If you fix the issue, kindly add following tag as appropriate
>> Reported-by: kernel test robot <lkp@intel.com>
>>
>> All errors (new ones prefixed by >>):
>>
>>    drivers/crypto/hisilicon/sec2/sec_crypto.c: In function 
>> 'sec_aead_crypto':
>>>> drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: error: 'sk_req' 
>>>> undeclared (first use in this function); did you mean 'a_req'?
>>     1751 |   return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>>          |                                        ^~~~~~
>>          |                                        a_req
>>    drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: note: each 
>> undeclared identifier is reported only once for each function it 
>> appears in
>>
>>
>> vim +1751 drivers/crypto/hisilicon/sec2/sec_crypto.c
>>
>>   1733
>>   1734    static int sec_aead_crypto(struct aead_request *a_req, bool 
>> encrypt)
>>   1735    {
>>   1736        struct crypto_aead *tfm = crypto_aead_reqtfm(a_req);
>>   1737        struct sec_req *req = aead_request_ctx(a_req);
>>   1738        struct sec_ctx *ctx = crypto_aead_ctx(tfm);
>>   1739        int ret;
>>   1740
>>   1741        req->flag = a_req->base.flags;
>>   1742        req->aead_req.aead_req = a_req;
>>   1743        req->c_req.encrypt = encrypt;
>>   1744        req->ctx = ctx;
>>   1745
>>   1746        ret = sec_aead_param_check(ctx, req);
>>   1747        if (unlikely(ret))
>>   1748            return -EINVAL;
>>   1749
>>   1750        if (unlikely(ctx->c_ctx.fallback))
>>> 1751            return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>>   1752
>>   1753        return ctx->req_op->process(ctx, req);
>>   1754    }
>>   1755
>>
>> ---
>> 0-DAY CI Kernel Test Service, Intel Corporation
>> https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
>>
>
>
> You shouldn't git am this patchset directly, because this patchset 
> depends on previous patchset.
> the series is "crypto: hisilicon - add new type of sqe for Kunpeng930",
> the patchwork is 
> https://patchwork.kernel.org/project/linux-crypto/list/?series=490143,
> thank you
> Kai

Hi Kai,

Thanks for the clarification, it could be very helpful for us if 
'--base' for git format-patch used or
there is a patchwork link in cover letter file.

Best Regards,
Rong Chen

Re: [kbuild-all] Re: [PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[yekai(A)]

On 2021/5/31 8:51, Rong Chen wrote:
>
>
> On 5/29/21 5:22 PM, yekai(A) wrote:
>>
>>
>> On 2021/5/28 22:13, kernel test robot wrote:
>>> Hi Kai,
>>>
>>> Thank you for the patch! Yet something to improve:
>>>
>>> [auto build test ERROR on cryptodev/master]
>>> [also build test ERROR on crypto/master linux/master linus/master
>>> v5.13-rc3 next-20210528]
>>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>>> And when submitting patch, we suggest to use '--base' as documented in
>>> https://git-scm.com/docs/git-format-patch]
>>>
>>> url:
>>> https://github.com/0day-ci/linux/commits/Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>>>
>>> base:
>>> https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
>>> master
>>> config: ia64-allmodconfig (attached as .config)
>>> compiler: ia64-linux-gcc (GCC) 9.3.0
>>> reproduce (this is a W=1 build):
>>>         wget
>>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>>> -O ~/bin/make.cross
>>>         chmod +x ~/bin/make.cross
>>>         #
>>> https://github.com/0day-ci/linux/commit/60bae5ed49c53ea90c82125a8295fb72833a3b68
>>>
>>>         git remote add linux-review https://github.com/0day-ci/linux
>>>         git fetch --no-tags linux-review
>>> Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>>>
>>>         git checkout 60bae5ed49c53ea90c82125a8295fb72833a3b68
>>>         # save the attached .config to linux build tree
>>>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0
>>> make.cross ARCH=ia64
>>>
>>> If you fix the issue, kindly add following tag as appropriate
>>> Reported-by: kernel test robot <lkp@intel.com>
>>>
>>> All errors (new ones prefixed by >>):
>>>
>>>    drivers/crypto/hisilicon/sec2/sec_crypto.c: In function
>>> 'sec_aead_crypto':
>>>>> drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: error: 'sk_req'
>>>>> undeclared (first use in this function); did you mean 'a_req'?
>>>     1751 |   return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>>>          |                                        ^~~~~~
>>>          |                                        a_req
>>>    drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: note: each
>>> undeclared identifier is reported only once for each function it
>>> appears in
>>>
>>>
>>> vim +1751 drivers/crypto/hisilicon/sec2/sec_crypto.c
>>>
>>>   1733
>>>   1734    static int sec_aead_crypto(struct aead_request *a_req, bool
>>> encrypt)
>>>   1735    {
>>>   1736        struct crypto_aead *tfm = crypto_aead_reqtfm(a_req);
>>>   1737        struct sec_req *req = aead_request_ctx(a_req);
>>>   1738        struct sec_ctx *ctx = crypto_aead_ctx(tfm);
>>>   1739        int ret;
>>>   1740
>>>   1741        req->flag = a_req->base.flags;
>>>   1742        req->aead_req.aead_req = a_req;
>>>   1743        req->c_req.encrypt = encrypt;
>>>   1744        req->ctx = ctx;
>>>   1745
>>>   1746        ret = sec_aead_param_check(ctx, req);
>>>   1747        if (unlikely(ret))
>>>   1748            return -EINVAL;
>>>   1749
>>>   1750        if (unlikely(ctx->c_ctx.fallback))
>>>> 1751            return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>>>   1752
>>>   1753        return ctx->req_op->process(ctx, req);
>>>   1754    }
>>>   1755
>>>
>>> ---
>>> 0-DAY CI Kernel Test Service, Intel Corporation
>>> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
>>>
>>
>>
>> You shouldn't git am this patchset directly, because this patchset
>> depends on previous patchset.
>> the series is "crypto: hisilicon - add new type of sqe for Kunpeng930",
>> the patchwork is
>> https://patchwork.kernel.org/project/linux-crypto/list/?series=490143,
>> thank you
>> Kai
>
> Hi Kai,
>
> Thanks for the clarification, it could be very helpful for us if
> '--base' for git format-patch used or
> there is a patchwork link in cover letter file.
>
> Best Regards,
> Rong Chen
> .
>
thanks for your suggestion.

Best Regards
Kai

Re: [PATCH 2/3] crypto: hisilicon/sec - add fallback tfm supporting for XTS mode

[yekai]

[-- Attachment #1: Type: text/plain, Size: 4130 bytes --]



On 2021/5/31 8:51, Rong Chen wrote:
>
>
> On 5/29/21 5:22 PM, yekai(A) wrote:
>>
>>
>> On 2021/5/28 22:13, kernel test robot wrote:
>>> Hi Kai,
>>>
>>> Thank you for the patch! Yet something to improve:
>>>
>>> [auto build test ERROR on cryptodev/master]
>>> [also build test ERROR on crypto/master linux/master linus/master
>>> v5.13-rc3 next-20210528]
>>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>>> And when submitting patch, we suggest to use '--base' as documented in
>>> https://git-scm.com/docs/git-format-patch]
>>>
>>> url:
>>> https://github.com/0day-ci/linux/commits/Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>>>
>>> base:
>>> https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git
>>> master
>>> config: ia64-allmodconfig (attached as .config)
>>> compiler: ia64-linux-gcc (GCC) 9.3.0
>>> reproduce (this is a W=1 build):
>>>         wget
>>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>>> -O ~/bin/make.cross
>>>         chmod +x ~/bin/make.cross
>>>         #
>>> https://github.com/0day-ci/linux/commit/60bae5ed49c53ea90c82125a8295fb72833a3b68
>>>
>>>         git remote add linux-review https://github.com/0day-ci/linux
>>>         git fetch --no-tags linux-review
>>> Kai-Ye/crypto-hisilicon-supports-new-skciphers-for-new-hardware/20210528-194644
>>>
>>>         git checkout 60bae5ed49c53ea90c82125a8295fb72833a3b68
>>>         # save the attached .config to linux build tree
>>>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0
>>> make.cross ARCH=ia64
>>>
>>> If you fix the issue, kindly add following tag as appropriate
>>> Reported-by: kernel test robot <lkp@intel.com>
>>>
>>> All errors (new ones prefixed by >>):
>>>
>>>    drivers/crypto/hisilicon/sec2/sec_crypto.c: In function
>>> 'sec_aead_crypto':
>>>>> drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: error: 'sk_req'
>>>>> undeclared (first use in this function); did you mean 'a_req'?
>>>     1751 |   return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>>>          |                                        ^~~~~~
>>>          |                                        a_req
>>>    drivers/crypto/hisilicon/sec2/sec_crypto.c:1751:40: note: each
>>> undeclared identifier is reported only once for each function it
>>> appears in
>>>
>>>
>>> vim +1751 drivers/crypto/hisilicon/sec2/sec_crypto.c
>>>
>>>   1733
>>>   1734    static int sec_aead_crypto(struct aead_request *a_req, bool
>>> encrypt)
>>>   1735    {
>>>   1736        struct crypto_aead *tfm = crypto_aead_reqtfm(a_req);
>>>   1737        struct sec_req *req = aead_request_ctx(a_req);
>>>   1738        struct sec_ctx *ctx = crypto_aead_ctx(tfm);
>>>   1739        int ret;
>>>   1740
>>>   1741        req->flag = a_req->base.flags;
>>>   1742        req->aead_req.aead_req = a_req;
>>>   1743        req->c_req.encrypt = encrypt;
>>>   1744        req->ctx = ctx;
>>>   1745
>>>   1746        ret = sec_aead_param_check(ctx, req);
>>>   1747        if (unlikely(ret))
>>>   1748            return -EINVAL;
>>>   1749
>>>   1750        if (unlikely(ctx->c_ctx.fallback))
>>>> 1751            return sec_skcipher_soft_crypto(ctx, sk_req, encrypt);
>>>   1752
>>>   1753        return ctx->req_op->process(ctx, req);
>>>   1754    }
>>>   1755
>>>
>>> ---
>>> 0-DAY CI Kernel Test Service, Intel Corporation
>>> https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
>>>
>>
>>
>> You shouldn't git am this patchset directly, because this patchset
>> depends on previous patchset.
>> the series is "crypto: hisilicon - add new type of sqe for Kunpeng930",
>> the patchwork is
>> https://patchwork.kernel.org/project/linux-crypto/list/?series=490143,
>> thank you
>> Kai
>
> Hi Kai,
>
> Thanks for the clarification, it could be very helpful for us if
> '--base' for git format-patch used or
> there is a patchwork link in cover letter file.
>
> Best Regards,
> Rong Chen
> .
>
thanks for your suggestion.

Best Regards
Kai

[PATCH 3/3] crypto: hisilicon/sec - fixup 3des minimum key size declaration

[Kai Ye]

Fixup the 3des algorithm  minimum key size declaration.

Signed-off-by: Kai Ye <yekai13@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index 25da33a..253ba80 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -1861,11 +1861,11 @@ static struct skcipher_alg sec_skciphers[] = {
 			 AES_BLOCK_SIZE, AES_BLOCK_SIZE)
 
 	SEC_SKCIPHER_ALG("ecb(des3_ede)", sec_setkey_3des_ecb,
-			 SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE,
+			 SEC_DES3_3KEY_SIZE, SEC_DES3_3KEY_SIZE,
 			 DES3_EDE_BLOCK_SIZE, 0)
 
 	SEC_SKCIPHER_ALG("cbc(des3_ede)", sec_setkey_3des_cbc,
-			 SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE,
+			 SEC_DES3_3KEY_SIZE, SEC_DES3_3KEY_SIZE,
 			 DES3_EDE_BLOCK_SIZE, DES3_EDE_BLOCK_SIZE)
 
 	SEC_SKCIPHER_ALG("xts(sm4)", sec_setkey_sm4_xts,
-- 
2.8.1

Re: [PATCH 0/3] crypto: hisilicon - supports new skciphers for new hardware

[Herbert Xu]

On Fri, May 28, 2021 at 07:42:03PM +0800, Kai Ye wrote:
> The driver adds new skciphers, add fallback tfm supporting for XTS mode.
> The crypto fuzzing test has been passed. fixup 3des minimum key size declaration
> that fuzz testing found.
> 
> Kai Ye (3):
>   crypto: hisilicon/sec - add new skcipher mode for SEC
>   crypto: hisilicon/sec - add fallback tfm supporting for XTS mode
>   crypto: hisilicon/sec - fixup 3des minimum key size declaration
> 
>  drivers/crypto/hisilicon/sec2/sec.h        |   4 +
>  drivers/crypto/hisilicon/sec2/sec_crypto.c | 192 ++++++++++++++++++++++++++---
>  drivers/crypto/hisilicon/sec2/sec_crypto.h |   3 +
>  3 files changed, 182 insertions(+), 17 deletions(-)

All applied.  Thanks.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt