All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v10 0/3] Enhance IOMMU default DMA mode build options
@ 2021-06-03 13:58 ` John Garry
  0 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 13:58 UTC (permalink / raw)
  To: joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66, John Garry

This is a reboot of Zhen Lei's series from a couple of years ago, which
never made it across the line.

I still think that it has some value, so taking up the mantle.

Motivation:
Allow lazy mode be default mode for DMA domains for all ARCHs, and not
only those who hardcode it (to be lazy). For ARM64, currently we must use
a kernel command line parameter to use lazy mode, which is less than
ideal.

Differences to v9:
https://lore.kernel.org/linux-iommu/20190613084240.16768-1-thunder.leizhen@huawei.com/#t
- Rebase to v5.13-rc2
- Remove CONFIG_IOMMU_DEFAULT_PASSTHROUGH from choice:
  Since we can dynamically change default domain of group, lazy or strict and
  passthrough are not mutually exclusive
- Drop ia64 patch, which I don't think was ever required
- Drop "x86/dma: use IS_ENABLED() to simplify the code", which is no
  longer required
- Drop s390/pci patch, as this arch does not use CONFIG_IOMMU_API or even
  already honour CONFIG_IOMMU_DEFAULT_PASSTHROUGH
  https://lore.kernel.org/linux-iommu/20190613084240.16768-4-thunder.leizhen@huawei.com/
- Drop powernv/iommu patch, as I no longer think that it is relevant
  https://lore.kernel.org/linux-iommu/20190613084240.16768-5-thunder.leizhen@huawei.com/
- Some tidying

Zhen Lei (3):
  iommu: Enhance IOMMU default DMA mode build options
  iommu/vt-d: Add support for IOMMU default DMA mode build options
  iommu/amd: Add support for IOMMU default DMA mode build options

 drivers/iommu/Kconfig       | 35 +++++++++++++++++++++++++++++++++++
 drivers/iommu/amd/init.c    |  3 ++-
 drivers/iommu/intel/iommu.c |  2 +-
 drivers/iommu/iommu.c       |  3 ++-
 4 files changed, 40 insertions(+), 3 deletions(-)

-- 
2.26.2


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v10 0/3] Enhance IOMMU default DMA mode build options
@ 2021-06-03 13:58 ` John Garry
  0 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 13:58 UTC (permalink / raw)
  To: joro, will, dwmw2, baolu.lu, robin.murphy; +Cc: linux-kernel, linuxarm, iommu

This is a reboot of Zhen Lei's series from a couple of years ago, which
never made it across the line.

I still think that it has some value, so taking up the mantle.

Motivation:
Allow lazy mode be default mode for DMA domains for all ARCHs, and not
only those who hardcode it (to be lazy). For ARM64, currently we must use
a kernel command line parameter to use lazy mode, which is less than
ideal.

Differences to v9:
https://lore.kernel.org/linux-iommu/20190613084240.16768-1-thunder.leizhen@huawei.com/#t
- Rebase to v5.13-rc2
- Remove CONFIG_IOMMU_DEFAULT_PASSTHROUGH from choice:
  Since we can dynamically change default domain of group, lazy or strict and
  passthrough are not mutually exclusive
- Drop ia64 patch, which I don't think was ever required
- Drop "x86/dma: use IS_ENABLED() to simplify the code", which is no
  longer required
- Drop s390/pci patch, as this arch does not use CONFIG_IOMMU_API or even
  already honour CONFIG_IOMMU_DEFAULT_PASSTHROUGH
  https://lore.kernel.org/linux-iommu/20190613084240.16768-4-thunder.leizhen@huawei.com/
- Drop powernv/iommu patch, as I no longer think that it is relevant
  https://lore.kernel.org/linux-iommu/20190613084240.16768-5-thunder.leizhen@huawei.com/
- Some tidying

Zhen Lei (3):
  iommu: Enhance IOMMU default DMA mode build options
  iommu/vt-d: Add support for IOMMU default DMA mode build options
  iommu/amd: Add support for IOMMU default DMA mode build options

 drivers/iommu/Kconfig       | 35 +++++++++++++++++++++++++++++++++++
 drivers/iommu/amd/init.c    |  3 ++-
 drivers/iommu/intel/iommu.c |  2 +-
 drivers/iommu/iommu.c       |  3 ++-
 4 files changed, 40 insertions(+), 3 deletions(-)

-- 
2.26.2

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
  2021-06-03 13:58 ` John Garry
@ 2021-06-03 13:58   ` John Garry
  -1 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 13:58 UTC (permalink / raw)
  To: joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66, John Garry

From: Zhen Lei <thunder.leizhen@huawei.com>

First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
opportunity to set {lazy|strict} mode as default at build time. Then put
the two config options in an choice, as they are mutually-exclusive.

[jpg: Make choice between strict and lazy only (and not passthrough)]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/iommu/Kconfig | 34 ++++++++++++++++++++++++++++++++++
 drivers/iommu/iommu.c |  3 ++-
 2 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 1f111b399bca..12ef90256df8 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -90,6 +90,40 @@ config IOMMU_DEFAULT_PASSTHROUGH
 
 	  If unsure, say N here.
 
+choice
+	prompt "IOMMU default DMA mode"
+	depends on IOMMU_API
+
+	default IOMMU_DEFAULT_STRICT
+	help
+	  This option allows an IOMMU DMA mode to be chosen at build time, to
+	  override the default DMA mode of each ARCH, removing the need to
+	  pass in kernel parameters through command line. It is still possible
+	  to provide ARCH-specific or common boot options to override this
+	  option.
+
+	  If unsure, keep the default.
+
+config IOMMU_DEFAULT_LAZY
+	bool "lazy"
+	help
+	  Support lazy mode, where for every IOMMU DMA unmap operation, the
+	  flush operation of IOTLB and the free operation of IOVA are deferred.
+	  They are only guaranteed to be done before the related IOVA will be
+	  reused.
+
+config IOMMU_DEFAULT_STRICT
+	bool "strict"
+	help
+	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
+	  the free operation of IOVA are guaranteed to be done in the unmap
+	  function.
+
+	  This mode is safer than the two above, but it maybe slower in some
+	  high performace scenarios.
+
+endchoice
+
 config OF_IOMMU
 	def_bool y
 	depends on OF && IOMMU_API
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 966426a96520..177b0dafc535 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -29,7 +29,8 @@ static struct kset *iommu_group_kset;
 static DEFINE_IDA(iommu_group_ida);
 
 static unsigned int iommu_def_domain_type __read_mostly;
-static bool iommu_dma_strict __read_mostly = true;
+static bool iommu_dma_strict __read_mostly =
+			IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
 static u32 iommu_cmd_line __read_mostly;
 
 struct iommu_group {
-- 
2.26.2


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
@ 2021-06-03 13:58   ` John Garry
  0 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 13:58 UTC (permalink / raw)
  To: joro, will, dwmw2, baolu.lu, robin.murphy; +Cc: linux-kernel, linuxarm, iommu

From: Zhen Lei <thunder.leizhen@huawei.com>

First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
opportunity to set {lazy|strict} mode as default at build time. Then put
the two config options in an choice, as they are mutually-exclusive.

[jpg: Make choice between strict and lazy only (and not passthrough)]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/iommu/Kconfig | 34 ++++++++++++++++++++++++++++++++++
 drivers/iommu/iommu.c |  3 ++-
 2 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 1f111b399bca..12ef90256df8 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -90,6 +90,40 @@ config IOMMU_DEFAULT_PASSTHROUGH
 
 	  If unsure, say N here.
 
+choice
+	prompt "IOMMU default DMA mode"
+	depends on IOMMU_API
+
+	default IOMMU_DEFAULT_STRICT
+	help
+	  This option allows an IOMMU DMA mode to be chosen at build time, to
+	  override the default DMA mode of each ARCH, removing the need to
+	  pass in kernel parameters through command line. It is still possible
+	  to provide ARCH-specific or common boot options to override this
+	  option.
+
+	  If unsure, keep the default.
+
+config IOMMU_DEFAULT_LAZY
+	bool "lazy"
+	help
+	  Support lazy mode, where for every IOMMU DMA unmap operation, the
+	  flush operation of IOTLB and the free operation of IOVA are deferred.
+	  They are only guaranteed to be done before the related IOVA will be
+	  reused.
+
+config IOMMU_DEFAULT_STRICT
+	bool "strict"
+	help
+	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
+	  the free operation of IOVA are guaranteed to be done in the unmap
+	  function.
+
+	  This mode is safer than the two above, but it maybe slower in some
+	  high performace scenarios.
+
+endchoice
+
 config OF_IOMMU
 	def_bool y
 	depends on OF && IOMMU_API
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 966426a96520..177b0dafc535 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -29,7 +29,8 @@ static struct kset *iommu_group_kset;
 static DEFINE_IDA(iommu_group_ida);
 
 static unsigned int iommu_def_domain_type __read_mostly;
-static bool iommu_dma_strict __read_mostly = true;
+static bool iommu_dma_strict __read_mostly =
+			IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
 static u32 iommu_cmd_line __read_mostly;
 
 struct iommu_group {
-- 
2.26.2

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v10 2/3] iommu/vt-d: Add support for IOMMU default DMA mode build options
  2021-06-03 13:58 ` John Garry
@ 2021-06-03 13:58   ` John Garry
  -1 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 13:58 UTC (permalink / raw)
  To: joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66, John Garry

From: Zhen Lei <thunder.leizhen@huawei.com>

Make IOMMU_DEFAULT_LAZY default for when INTEL_IOMMU config is set,
and make intel_iommu_strict initially hold value of
IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT).

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/iommu/Kconfig       | 1 +
 drivers/iommu/intel/iommu.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 12ef90256df8..03c88cee806f 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -94,6 +94,7 @@ choice
 	prompt "IOMMU default DMA mode"
 	depends on IOMMU_API
 
+	default IOMMU_DEFAULT_LAZY if INTEL_IOMMU
 	default IOMMU_DEFAULT_STRICT
 	help
 	  This option allows an IOMMU DMA mode to be chosen at build time, to
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 708f430af1c4..0d4d2c18ee77 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -360,7 +360,7 @@ int intel_iommu_enabled = 0;
 EXPORT_SYMBOL_GPL(intel_iommu_enabled);
 
 static int dmar_map_gfx = 1;
-static int intel_iommu_strict;
+static int intel_iommu_strict = IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
 static int intel_iommu_superpage = 1;
 static int iommu_identity_mapping;
 static int iommu_skip_te_disable;
-- 
2.26.2


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v10 2/3] iommu/vt-d: Add support for IOMMU default DMA mode build options
@ 2021-06-03 13:58   ` John Garry
  0 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 13:58 UTC (permalink / raw)
  To: joro, will, dwmw2, baolu.lu, robin.murphy; +Cc: linux-kernel, linuxarm, iommu

From: Zhen Lei <thunder.leizhen@huawei.com>

Make IOMMU_DEFAULT_LAZY default for when INTEL_IOMMU config is set,
and make intel_iommu_strict initially hold value of
IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT).

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/iommu/Kconfig       | 1 +
 drivers/iommu/intel/iommu.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 12ef90256df8..03c88cee806f 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -94,6 +94,7 @@ choice
 	prompt "IOMMU default DMA mode"
 	depends on IOMMU_API
 
+	default IOMMU_DEFAULT_LAZY if INTEL_IOMMU
 	default IOMMU_DEFAULT_STRICT
 	help
 	  This option allows an IOMMU DMA mode to be chosen at build time, to
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 708f430af1c4..0d4d2c18ee77 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -360,7 +360,7 @@ int intel_iommu_enabled = 0;
 EXPORT_SYMBOL_GPL(intel_iommu_enabled);
 
 static int dmar_map_gfx = 1;
-static int intel_iommu_strict;
+static int intel_iommu_strict = IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
 static int intel_iommu_superpage = 1;
 static int iommu_identity_mapping;
 static int iommu_skip_te_disable;
-- 
2.26.2

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v10 3/3] iommu/amd: Add support for IOMMU default DMA mode build options
  2021-06-03 13:58 ` John Garry
@ 2021-06-03 13:58   ` John Garry
  -1 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 13:58 UTC (permalink / raw)
  To: joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66, John Garry

From: Zhen Lei <thunder.leizhen@huawei.com>

The default DMA mode is lazy, but allow this to be set to strict mode at
build time. It may still be overridden by the relevant boot option.

Also make IOMMU_DEFAULT_LAZY default for when AMD_IOMMU config is set.

[jpg: Rebase for relocated file]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/iommu/Kconfig    | 2 +-
 drivers/iommu/amd/init.c | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 03c88cee806f..50c1477a6c2e 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -94,7 +94,7 @@ choice
 	prompt "IOMMU default DMA mode"
 	depends on IOMMU_API
 
-	default IOMMU_DEFAULT_LAZY if INTEL_IOMMU
+	default IOMMU_DEFAULT_LAZY if (AMD_IOMMU || INTEL_IOMMU)
 	default IOMMU_DEFAULT_STRICT
 	help
 	  This option allows an IOMMU DMA mode to be chosen at build time, to
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index d006724f4dc2..af662fc37cbe 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -160,7 +160,8 @@ u16 amd_iommu_last_bdf;			/* largest PCI device id we have
 					   to handle */
 LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
 					   we find in ACPI */
-bool amd_iommu_unmap_flush;		/* if true, flush on every unmap */
+/* if true, flush on every unmap */
+bool amd_iommu_unmap_flush = IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
 
 LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
 					   system */
-- 
2.26.2


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v10 3/3] iommu/amd: Add support for IOMMU default DMA mode build options
@ 2021-06-03 13:58   ` John Garry
  0 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 13:58 UTC (permalink / raw)
  To: joro, will, dwmw2, baolu.lu, robin.murphy; +Cc: linux-kernel, linuxarm, iommu

From: Zhen Lei <thunder.leizhen@huawei.com>

The default DMA mode is lazy, but allow this to be set to strict mode at
build time. It may still be overridden by the relevant boot option.

Also make IOMMU_DEFAULT_LAZY default for when AMD_IOMMU config is set.

[jpg: Rebase for relocated file]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/iommu/Kconfig    | 2 +-
 drivers/iommu/amd/init.c | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 03c88cee806f..50c1477a6c2e 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -94,7 +94,7 @@ choice
 	prompt "IOMMU default DMA mode"
 	depends on IOMMU_API
 
-	default IOMMU_DEFAULT_LAZY if INTEL_IOMMU
+	default IOMMU_DEFAULT_LAZY if (AMD_IOMMU || INTEL_IOMMU)
 	default IOMMU_DEFAULT_STRICT
 	help
 	  This option allows an IOMMU DMA mode to be chosen at build time, to
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index d006724f4dc2..af662fc37cbe 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -160,7 +160,8 @@ u16 amd_iommu_last_bdf;			/* largest PCI device id we have
 					   to handle */
 LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
 					   we find in ACPI */
-bool amd_iommu_unmap_flush;		/* if true, flush on every unmap */
+/* if true, flush on every unmap */
+bool amd_iommu_unmap_flush = IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
 
 LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
 					   system */
-- 
2.26.2

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
  2021-06-03 13:58   ` John Garry
@ 2021-06-03 17:00     ` Randy Dunlap
  -1 siblings, 0 replies; 16+ messages in thread
From: Randy Dunlap @ 2021-06-03 17:00 UTC (permalink / raw)
  To: John Garry, joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66

On 6/3/21 6:58 AM, John Garry wrote:
> From: Zhen Lei <thunder.leizhen@huawei.com>
> 
> First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
> opportunity to set {lazy|strict} mode as default at build time. Then put
> the two config options in an choice, as they are mutually-exclusive.
> 
> [jpg: Make choice between strict and lazy only (and not passthrough)]
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> Signed-off-by: John Garry <john.garry@huawei.com>
> ---
>  drivers/iommu/Kconfig | 34 ++++++++++++++++++++++++++++++++++
>  drivers/iommu/iommu.c |  3 ++-
>  2 files changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 1f111b399bca..12ef90256df8 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -90,6 +90,40 @@ config IOMMU_DEFAULT_PASSTHROUGH
>  
>  	  If unsure, say N here.
>  
> +choice
> +	prompt "IOMMU default DMA mode"
> +	depends on IOMMU_API
> +
> +	default IOMMU_DEFAULT_STRICT
> +	help
> +	  This option allows an IOMMU DMA mode to be chosen at build time, to
> +	  override the default DMA mode of each ARCH, removing the need to
> +	  pass in kernel parameters through command line. It is still possible
> +	  to provide ARCH-specific or common boot options to override this
> +	  option.
> +
> +	  If unsure, keep the default.
> +
> +config IOMMU_DEFAULT_LAZY
> +	bool "lazy"
> +	help
> +	  Support lazy mode, where for every IOMMU DMA unmap operation, the
> +	  flush operation of IOTLB and the free operation of IOVA are deferred.
> +	  They are only guaranteed to be done before the related IOVA will be
> +	  reused.
> +
> +config IOMMU_DEFAULT_STRICT
> +	bool "strict"
> +	help
> +	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
> +	  the free operation of IOVA are guaranteed to be done in the unmap
> +	  function.
> +
> +	  This mode is safer than the two above, but it maybe slower in some

There don't seem to be two above?

> +	  high performace scenarios.

	       performance

> +
> +endchoice


thanks.
-- 
~Randy


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
@ 2021-06-03 17:00     ` Randy Dunlap
  0 siblings, 0 replies; 16+ messages in thread
From: Randy Dunlap @ 2021-06-03 17:00 UTC (permalink / raw)
  To: John Garry, joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: iommu, linux-kernel, linuxarm

On 6/3/21 6:58 AM, John Garry wrote:
> From: Zhen Lei <thunder.leizhen@huawei.com>
> 
> First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
> opportunity to set {lazy|strict} mode as default at build time. Then put
> the two config options in an choice, as they are mutually-exclusive.
> 
> [jpg: Make choice between strict and lazy only (and not passthrough)]
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> Signed-off-by: John Garry <john.garry@huawei.com>
> ---
>  drivers/iommu/Kconfig | 34 ++++++++++++++++++++++++++++++++++
>  drivers/iommu/iommu.c |  3 ++-
>  2 files changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 1f111b399bca..12ef90256df8 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -90,6 +90,40 @@ config IOMMU_DEFAULT_PASSTHROUGH
>  
>  	  If unsure, say N here.
>  
> +choice
> +	prompt "IOMMU default DMA mode"
> +	depends on IOMMU_API
> +
> +	default IOMMU_DEFAULT_STRICT
> +	help
> +	  This option allows an IOMMU DMA mode to be chosen at build time, to
> +	  override the default DMA mode of each ARCH, removing the need to
> +	  pass in kernel parameters through command line. It is still possible
> +	  to provide ARCH-specific or common boot options to override this
> +	  option.
> +
> +	  If unsure, keep the default.
> +
> +config IOMMU_DEFAULT_LAZY
> +	bool "lazy"
> +	help
> +	  Support lazy mode, where for every IOMMU DMA unmap operation, the
> +	  flush operation of IOTLB and the free operation of IOVA are deferred.
> +	  They are only guaranteed to be done before the related IOVA will be
> +	  reused.
> +
> +config IOMMU_DEFAULT_STRICT
> +	bool "strict"
> +	help
> +	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
> +	  the free operation of IOVA are guaranteed to be done in the unmap
> +	  function.
> +
> +	  This mode is safer than the two above, but it maybe slower in some

There don't seem to be two above?

> +	  high performace scenarios.

	       performance

> +
> +endchoice


thanks.
-- 
~Randy

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
  2021-06-03 17:00     ` Randy Dunlap
@ 2021-06-03 17:04       ` John Garry
  -1 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 17:04 UTC (permalink / raw)
  To: Randy Dunlap, joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66

On 03/06/2021 18:00, Randy Dunlap wrote:
>> +config IOMMU_DEFAULT_STRICT
>> +	bool "strict"
>> +	help
>> +	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
>> +	  the free operation of IOVA are guaranteed to be done in the unmap
>> +	  function.
>> +
>> +	  This mode is safer than the two above, but it maybe slower in some
> There don't seem to be two above?
> 

Right, it's a remnant from a previous version - will fix, pending other 
reviews

>> +	  high performace scenarios.
> 	       performance
> 

ok

>> +
>> +endchoice

Thanks!

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
@ 2021-06-03 17:04       ` John Garry
  0 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-03 17:04 UTC (permalink / raw)
  To: Randy Dunlap, joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: iommu, linux-kernel, linuxarm

On 03/06/2021 18:00, Randy Dunlap wrote:
>> +config IOMMU_DEFAULT_STRICT
>> +	bool "strict"
>> +	help
>> +	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
>> +	  the free operation of IOVA are guaranteed to be done in the unmap
>> +	  function.
>> +
>> +	  This mode is safer than the two above, but it maybe slower in some
> There don't seem to be two above?
> 

Right, it's a remnant from a previous version - will fix, pending other 
reviews

>> +	  high performace scenarios.
> 	       performance
> 

ok

>> +
>> +endchoice

Thanks!
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
  2021-06-03 13:58   ` John Garry
@ 2021-06-04  2:54     ` Leizhen (ThunderTown)
  -1 siblings, 0 replies; 16+ messages in thread
From: Leizhen (ThunderTown) @ 2021-06-04  2:54 UTC (permalink / raw)
  To: John Garry, joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: linux-kernel, iommu, linuxarm, chenxiang66



On 2021/6/3 21:58, John Garry wrote:
> From: Zhen Lei <thunder.leizhen@huawei.com>
> 
> First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
> opportunity to set {lazy|strict} mode as default at build time. Then put
> the two config options in an choice, as they are mutually-exclusive.
> 
> [jpg: Make choice between strict and lazy only (and not passthrough)]
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> Signed-off-by: John Garry <john.garry@huawei.com>
> ---
>  drivers/iommu/Kconfig | 34 ++++++++++++++++++++++++++++++++++
>  drivers/iommu/iommu.c |  3 ++-
>  2 files changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 1f111b399bca..12ef90256df8 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -90,6 +90,40 @@ config IOMMU_DEFAULT_PASSTHROUGH
>  
>  	  If unsure, say N here.
>  
> +choice
> +	prompt "IOMMU default DMA mode"
> +	depends on IOMMU_API

config INTEL_IOMMU
        depends on PCI_MSI && ACPI && (X86 || IA64)

config AMD_IOMMU
        depends on X86_64 && PCI && ACPI && HAVE_CMPXCHG_DOUBLE

config ARM_SMMU_V3
        depends on ARM64

"depends on ARM_SMMU_V3 || INTEL_IOMMU || AMD_IOMMU" may need to be added, because it doesn't work on other platforms.

or "depends on X86 || IA64 || X86_64 || ARM64"

> +
> +	default IOMMU_DEFAULT_STRICT
> +	help
> +	  This option allows an IOMMU DMA mode to be chosen at build time, to
> +	  override the default DMA mode of each ARCH, removing the need to
> +	  pass in kernel parameters through command line. It is still possible
> +	  to provide ARCH-specific or common boot options to override this
> +	  option.
> +
> +	  If unsure, keep the default.
> +
> +config IOMMU_DEFAULT_LAZY
> +	bool "lazy"
> +	help
> +	  Support lazy mode, where for every IOMMU DMA unmap operation, the
> +	  flush operation of IOTLB and the free operation of IOVA are deferred.
> +	  They are only guaranteed to be done before the related IOVA will be
> +	  reused.
> +
> +config IOMMU_DEFAULT_STRICT
> +	bool "strict"
> +	help
> +	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
> +	  the free operation of IOVA are guaranteed to be done in the unmap
> +	  function.
> +
> +	  This mode is safer than the two above, but it maybe slower in some
> +	  high performace scenarios.
> +
> +endchoice
> +
>  config OF_IOMMU
>  	def_bool y
>  	depends on OF && IOMMU_API
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 966426a96520..177b0dafc535 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -29,7 +29,8 @@ static struct kset *iommu_group_kset;
>  static DEFINE_IDA(iommu_group_ida);
>  
>  static unsigned int iommu_def_domain_type __read_mostly;
> -static bool iommu_dma_strict __read_mostly = true;
> +static bool iommu_dma_strict __read_mostly =
> +			IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);

Currently, a maximum of 100 columns are allowed in a row.

>  static u32 iommu_cmd_line __read_mostly;
>  
>  struct iommu_group {
> 


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
@ 2021-06-04  2:54     ` Leizhen (ThunderTown)
  0 siblings, 0 replies; 16+ messages in thread
From: Leizhen (ThunderTown) @ 2021-06-04  2:54 UTC (permalink / raw)
  To: John Garry, joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: iommu, linux-kernel, linuxarm



On 2021/6/3 21:58, John Garry wrote:
> From: Zhen Lei <thunder.leizhen@huawei.com>
> 
> First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
> opportunity to set {lazy|strict} mode as default at build time. Then put
> the two config options in an choice, as they are mutually-exclusive.
> 
> [jpg: Make choice between strict and lazy only (and not passthrough)]
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> Signed-off-by: John Garry <john.garry@huawei.com>
> ---
>  drivers/iommu/Kconfig | 34 ++++++++++++++++++++++++++++++++++
>  drivers/iommu/iommu.c |  3 ++-
>  2 files changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 1f111b399bca..12ef90256df8 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -90,6 +90,40 @@ config IOMMU_DEFAULT_PASSTHROUGH
>  
>  	  If unsure, say N here.
>  
> +choice
> +	prompt "IOMMU default DMA mode"
> +	depends on IOMMU_API

config INTEL_IOMMU
        depends on PCI_MSI && ACPI && (X86 || IA64)

config AMD_IOMMU
        depends on X86_64 && PCI && ACPI && HAVE_CMPXCHG_DOUBLE

config ARM_SMMU_V3
        depends on ARM64

"depends on ARM_SMMU_V3 || INTEL_IOMMU || AMD_IOMMU" may need to be added, because it doesn't work on other platforms.

or "depends on X86 || IA64 || X86_64 || ARM64"

> +
> +	default IOMMU_DEFAULT_STRICT
> +	help
> +	  This option allows an IOMMU DMA mode to be chosen at build time, to
> +	  override the default DMA mode of each ARCH, removing the need to
> +	  pass in kernel parameters through command line. It is still possible
> +	  to provide ARCH-specific or common boot options to override this
> +	  option.
> +
> +	  If unsure, keep the default.
> +
> +config IOMMU_DEFAULT_LAZY
> +	bool "lazy"
> +	help
> +	  Support lazy mode, where for every IOMMU DMA unmap operation, the
> +	  flush operation of IOTLB and the free operation of IOVA are deferred.
> +	  They are only guaranteed to be done before the related IOVA will be
> +	  reused.
> +
> +config IOMMU_DEFAULT_STRICT
> +	bool "strict"
> +	help
> +	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
> +	  the free operation of IOVA are guaranteed to be done in the unmap
> +	  function.
> +
> +	  This mode is safer than the two above, but it maybe slower in some
> +	  high performace scenarios.
> +
> +endchoice
> +
>  config OF_IOMMU
>  	def_bool y
>  	depends on OF && IOMMU_API
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 966426a96520..177b0dafc535 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -29,7 +29,8 @@ static struct kset *iommu_group_kset;
>  static DEFINE_IDA(iommu_group_ida);
>  
>  static unsigned int iommu_def_domain_type __read_mostly;
> -static bool iommu_dma_strict __read_mostly = true;
> +static bool iommu_dma_strict __read_mostly =
> +			IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);

Currently, a maximum of 100 columns are allowed in a row.

>  static u32 iommu_cmd_line __read_mostly;
>  
>  struct iommu_group {
> 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
  2021-06-04  2:54     ` Leizhen (ThunderTown)
@ 2021-06-04  8:19       ` John Garry
  -1 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-04  8:19 UTC (permalink / raw)
  To: Leizhen (ThunderTown), joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: linux-kernel, iommu, linuxarm, chenxiang66


>>   
>>   	  If unsure, say N here.
>>   
>> +choice
>> +	prompt "IOMMU default DMA mode"
>> +	depends on IOMMU_API
> 
> config INTEL_IOMMU
>          depends on PCI_MSI && ACPI && (X86 || IA64)
> 
> config AMD_IOMMU
>          depends on X86_64 && PCI && ACPI && HAVE_CMPXCHG_DOUBLE
> 
> config ARM_SMMU_V3
>          depends on ARM64
> 
> "depends on ARM_SMMU_V3 || INTEL_IOMMU || AMD_IOMMU" may need to be added, because it doesn't work on other platforms.
> 
> or "depends on X86 || IA64 || X86_64 || ARM64"

I suppose so. But I don't think that any other archs use the value from 
iommu_dma_strict anyway.

> 
>> +
>> +	default IOMMU_DEFAULT_STRICT
>> +	help
>> +	  This option allows an IOMMU DMA mode to be chosen at build time, to
>> +	  override the default DMA mode of each ARCH, removing the need to
>> +	  pass in kernel parameters through command line. It is still possible
>> +	  to provide ARCH-specific or common boot options to override this
>> +	  option.
>> +
>> +	  If unsure, keep the default.
>> +
>> +config IOMMU_DEFAULT_LAZY
>> +	bool "lazy"
>> +	help
>> +	  Support lazy mode, where for every IOMMU DMA unmap operation, the
>> +	  flush operation of IOTLB and the free operation of IOVA are deferred.
>> +	  They are only guaranteed to be done before the related IOVA will be
>> +	  reused.
>> +
>> +config IOMMU_DEFAULT_STRICT
>> +	bool "strict"
>> +	help
>> +	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
>> +	  the free operation of IOVA are guaranteed to be done in the unmap
>> +	  function.
>> +
>> +	  This mode is safer than the two above, but it maybe slower in some
>> +	  high performace scenarios.
>> +
>> +endchoice
>> +
>>   config OF_IOMMU
>>   	def_bool y
>>   	depends on OF && IOMMU_API
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index 966426a96520..177b0dafc535 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -29,7 +29,8 @@ static struct kset *iommu_group_kset;
>>   static DEFINE_IDA(iommu_group_ida);
>>   
>>   static unsigned int iommu_def_domain_type __read_mostly;
>> -static bool iommu_dma_strict __read_mostly = true;
>> +static bool iommu_dma_strict __read_mostly =
>> +			IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
> 
> Currently, a maximum of 100 columns are allowed in a row.

Sure, but some people still prefer limiting to 80, and codingstyle
doc mentions a preference for 80.

But if you really think I should change, then that's ok.

Thanks,
John

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] iommu: Enhance IOMMU default DMA mode build options
@ 2021-06-04  8:19       ` John Garry
  0 siblings, 0 replies; 16+ messages in thread
From: John Garry @ 2021-06-04  8:19 UTC (permalink / raw)
  To: Leizhen (ThunderTown), joro, will, dwmw2, baolu.lu, robin.murphy
  Cc: iommu, linux-kernel, linuxarm


>>   
>>   	  If unsure, say N here.
>>   
>> +choice
>> +	prompt "IOMMU default DMA mode"
>> +	depends on IOMMU_API
> 
> config INTEL_IOMMU
>          depends on PCI_MSI && ACPI && (X86 || IA64)
> 
> config AMD_IOMMU
>          depends on X86_64 && PCI && ACPI && HAVE_CMPXCHG_DOUBLE
> 
> config ARM_SMMU_V3
>          depends on ARM64
> 
> "depends on ARM_SMMU_V3 || INTEL_IOMMU || AMD_IOMMU" may need to be added, because it doesn't work on other platforms.
> 
> or "depends on X86 || IA64 || X86_64 || ARM64"

I suppose so. But I don't think that any other archs use the value from 
iommu_dma_strict anyway.

> 
>> +
>> +	default IOMMU_DEFAULT_STRICT
>> +	help
>> +	  This option allows an IOMMU DMA mode to be chosen at build time, to
>> +	  override the default DMA mode of each ARCH, removing the need to
>> +	  pass in kernel parameters through command line. It is still possible
>> +	  to provide ARCH-specific or common boot options to override this
>> +	  option.
>> +
>> +	  If unsure, keep the default.
>> +
>> +config IOMMU_DEFAULT_LAZY
>> +	bool "lazy"
>> +	help
>> +	  Support lazy mode, where for every IOMMU DMA unmap operation, the
>> +	  flush operation of IOTLB and the free operation of IOVA are deferred.
>> +	  They are only guaranteed to be done before the related IOVA will be
>> +	  reused.
>> +
>> +config IOMMU_DEFAULT_STRICT
>> +	bool "strict"
>> +	help
>> +	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
>> +	  the free operation of IOVA are guaranteed to be done in the unmap
>> +	  function.
>> +
>> +	  This mode is safer than the two above, but it maybe slower in some
>> +	  high performace scenarios.
>> +
>> +endchoice
>> +
>>   config OF_IOMMU
>>   	def_bool y
>>   	depends on OF && IOMMU_API
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index 966426a96520..177b0dafc535 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -29,7 +29,8 @@ static struct kset *iommu_group_kset;
>>   static DEFINE_IDA(iommu_group_ida);
>>   
>>   static unsigned int iommu_def_domain_type __read_mostly;
>> -static bool iommu_dma_strict __read_mostly = true;
>> +static bool iommu_dma_strict __read_mostly =
>> +			IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
> 
> Currently, a maximum of 100 columns are allowed in a row.

Sure, but some people still prefer limiting to 80, and codingstyle
doc mentions a preference for 80.

But if you really think I should change, then that's ok.

Thanks,
John
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2021-06-04  8:20 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-03 13:58 [PATCH v10 0/3] Enhance IOMMU default DMA mode build options John Garry
2021-06-03 13:58 ` John Garry
2021-06-03 13:58 ` [PATCH v10 1/3] iommu: " John Garry
2021-06-03 13:58   ` John Garry
2021-06-03 17:00   ` Randy Dunlap
2021-06-03 17:00     ` Randy Dunlap
2021-06-03 17:04     ` John Garry
2021-06-03 17:04       ` John Garry
2021-06-04  2:54   ` Leizhen (ThunderTown)
2021-06-04  2:54     ` Leizhen (ThunderTown)
2021-06-04  8:19     ` John Garry
2021-06-04  8:19       ` John Garry
2021-06-03 13:58 ` [PATCH v10 2/3] iommu/vt-d: Add support for " John Garry
2021-06-03 13:58   ` John Garry
2021-06-03 13:58 ` [PATCH v10 3/3] iommu/amd: " John Garry
2021-06-03 13:58   ` John Garry

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.