[PATCH] ina3221: use CVRF only for single-shot conversion

[Ninad Malwade <nmalwade@nvidia.com>]

As per current logic the wait time per conversion is arouns 430ms
for 512 samples and around 860ms for 1024 samples for 3 channels
considering 140us as the bus voltage and shunt voltage sampling
conversion time.

This waiting time is a lot for the continuous mode and even for
the single shot mode. For continuous mode when moving average is
considered the waiting for CVRF bit is not required and the data
from the previous conversion is sufficuent. As mentioned in the
datasheet the conversion ready bit is provided to help coordinate
single-shot conversions, we can restrict the use to single-shot
mode only.

Also, the conversion time is for the averaged samples, the wait
time for the polling can omit the number of samples consideration.

Signed-off-by: Ninad Malwade <nmalwade@nvidia.com>
---
 drivers/hwmon/ina3221.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index c602583..58d3828 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -196,13 +196,11 @@ static inline u32 ina3221_reg_to_interval_us(u16 config)
 	u32 channels = hweight16(config & INA3221_CONFIG_CHs_EN_MASK);
 	u32 vbus_ct_idx = INA3221_CONFIG_VBUS_CT(config);
 	u32 vsh_ct_idx = INA3221_CONFIG_VSH_CT(config);
-	u32 samples_idx = INA3221_CONFIG_AVG(config);
-	u32 samples = ina3221_avg_samples[samples_idx];
 	u32 vbus_ct = ina3221_conv_time[vbus_ct_idx];
 	u32 vsh_ct = ina3221_conv_time[vsh_ct_idx];
 
 	/* Calculate total conversion time */
-	return channels * (vbus_ct + vsh_ct) * samples;
+	return channels * (vbus_ct + vsh_ct);
 }
 
 static inline int ina3221_wait_for_data(struct ina3221_data *ina)
@@ -288,13 +286,14 @@ static int ina3221_read_in(struct device *dev, u32 attr, int channel, long *val)
 			return -ENODATA;
 
 		/* Write CONFIG register to trigger a single-shot measurement */
-		if (ina->single_shot)
+		if (ina->single_shot) {
 			regmap_write(ina->regmap, INA3221_CONFIG,
 				     ina->reg_config);
 
-		ret = ina3221_wait_for_data(ina);
-		if (ret)
-			return ret;
+			ret = ina3221_wait_for_data(ina);
+			if (ret)
+				return ret;
+		}
 
 		ret = ina3221_read_value(ina, reg, &regval);
 		if (ret)
@@ -344,13 +343,14 @@ static int ina3221_read_curr(struct device *dev, u32 attr,
 			return -ENODATA;
 
 		/* Write CONFIG register to trigger a single-shot measurement */
-		if (ina->single_shot)
+		if (ina->single_shot) {
 			regmap_write(ina->regmap, INA3221_CONFIG,
 				     ina->reg_config);
 
-		ret = ina3221_wait_for_data(ina);
-		if (ret)
-			return ret;
+			ret = ina3221_wait_for_data(ina);
+			if (ret)
+				return ret;
+		}
 
 		fallthrough;
 	case hwmon_curr_crit:
-- 
2.7.4