All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, rajur@chelsio.com
Subject: [PATCH net] cxgb4: avoid link re-train during TC-MQPRIO configuration
Date: Fri,  4 Jun 2021 16:48:18 +0530	[thread overview]
Message-ID: <1622805498-26094-1-git-send-email-rahul.lakkireddy@chelsio.com> (raw)

When configuring TC-MQPRIO offload, only turn off netdev carrier and
don't bring physical link down in hardware. Otherwise, when the
physical link is brought up again after configuration, it gets
re-trained and stalls ongoing traffic.

Also, when firmware is no longer accessible or crashed, avoid sending
FLOWC and waiting for reply that will never come.

Fix following hung_task_timeout_secs trace seen in these cases.

INFO: task tc:20807 blocked for more than 122 seconds.
      Tainted: G S                5.13.0-rc3+ #122
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:tc   state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000
Call Trace:
 __schedule+0x27b/0x6a0
 schedule+0x37/0xa0
 schedule_preempt_disabled+0x5/0x10
 __mutex_lock.isra.14+0x2a0/0x4a0
 ? netlink_lookup+0x120/0x1a0
 ? rtnl_fill_ifinfo+0x10f0/0x10f0
 __netlink_dump_start+0x70/0x250
 rtnetlink_rcv_msg+0x28b/0x380
 ? rtnl_fill_ifinfo+0x10f0/0x10f0
 ? rtnl_calcit.isra.42+0x120/0x120
 netlink_rcv_skb+0x4b/0xf0
 netlink_unicast+0x1a0/0x280
 netlink_sendmsg+0x216/0x440
 sock_sendmsg+0x56/0x60
 __sys_sendto+0xe9/0x150
 ? handle_mm_fault+0x6d/0x1b0
 ? do_user_addr_fault+0x1c5/0x620
 __x64_sys_sendto+0x1f/0x30
 do_syscall_64+0x3c/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7f73218321
RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321
RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003
RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6
R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0

Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h           | 2 --
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c      | 4 ++--
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c | 9 ++++++---
 drivers/net/ethernet/chelsio/cxgb4/sge.c             | 6 ++++++
 4 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 314f8d806723..9058f09f921e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -2177,8 +2177,6 @@ int cxgb4_update_mac_filt(struct port_info *pi, unsigned int viid,
 			  bool persistent, u8 *smt_idx);
 int cxgb4_get_msix_idx_from_bmap(struct adapter *adap);
 void cxgb4_free_msix_idx_in_bmap(struct adapter *adap, u32 msix_idx);
-int cxgb_open(struct net_device *dev);
-int cxgb_close(struct net_device *dev);
 void cxgb4_enable_rx(struct adapter *adap, struct sge_rspq *q);
 void cxgb4_quiesce_rx(struct sge_rspq *q);
 int cxgb4_port_mirror_alloc(struct net_device *dev);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 421bd9b88028..1f601de02e70 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -2834,7 +2834,7 @@ static void cxgb_down(struct adapter *adapter)
 /*
  * net_device operations
  */
-int cxgb_open(struct net_device *dev)
+static int cxgb_open(struct net_device *dev)
 {
 	struct port_info *pi = netdev_priv(dev);
 	struct adapter *adapter = pi->adapter;
@@ -2882,7 +2882,7 @@ int cxgb_open(struct net_device *dev)
 	return err;
 }
 
-int cxgb_close(struct net_device *dev)
+static int cxgb_close(struct net_device *dev)
 {
 	struct port_info *pi = netdev_priv(dev);
 	struct adapter *adapter = pi->adapter;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c
index 6c259de96f96..338b04f339b3 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c
@@ -589,7 +589,8 @@ int cxgb4_setup_tc_mqprio(struct net_device *dev,
 	 * down before configuring tc params.
 	 */
 	if (netif_running(dev)) {
-		cxgb_close(dev);
+		netif_tx_stop_all_queues(dev);
+		netif_carrier_off(dev);
 		needs_bring_up = true;
 	}
 
@@ -615,8 +616,10 @@ int cxgb4_setup_tc_mqprio(struct net_device *dev,
 	}
 
 out:
-	if (needs_bring_up)
-		cxgb_open(dev);
+	if (needs_bring_up) {
+		netif_tx_start_all_queues(dev);
+		netif_carrier_on(dev);
+	}
 
 	mutex_unlock(&adap->tc_mqprio->mqprio_mutex);
 	return ret;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 1e5f2edb70cf..6a099cb34b12 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2556,6 +2556,12 @@ int cxgb4_ethofld_send_flowc(struct net_device *dev, u32 eotid, u32 tc)
 	if (!eosw_txq)
 		return -ENOMEM;
 
+	if (!(adap->flags & CXGB4_FW_OK)) {
+		/* Don't stall caller when access to FW is lost */
+		complete(&eosw_txq->completion);
+		return -EIO;
+	}
+
 	skb = alloc_skb(len, GFP_KERNEL);
 	if (!skb)
 		return -ENOMEM;
-- 
2.27.0


             reply	other threads:[~2021-06-04 13:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-04 11:18 Rahul Lakkireddy [this message]
2021-06-04 21:50 ` [PATCH net] cxgb4: avoid link re-train during TC-MQPRIO configuration patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1622805498-26094-1-git-send-email-rahul.lakkireddy@chelsio.com \
    --to=rahul.lakkireddy@chelsio.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rajur@chelsio.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.