All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xiaofei Tan <tanxiaofei@huawei.com>
To: <james.morse@arm.com>, <rafael@kernel.org>, <rjw@rjwysocki.net>,
	<lenb@kernel.org>, <tony.luck@intel.com>, <bp@alien8.de>,
	<akpm@linux-foundation.org>, <jroedel@suse.de>,
	<peterz@infradead.org>
Cc: <linux-acpi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linuxarm@openeuler.org>, Xiaofei Tan <tanxiaofei@huawei.com>
Subject: [PATCH v6] ACPI / APEI: fix the regression of synchronous external aborts occur in user-mode
Date: Wed, 9 Jun 2021 14:03:00 +0800	[thread overview]
Message-ID: <1623218580-41912-1-git-send-email-tanxiaofei@huawei.com> (raw)

Before commit 8fcc4ae6faf8 ("arm64: acpi: Make apei_claim_sea()
synchronise with APEI's irq work"), do_sea() would unconditionally
signal the affected task from the arch code. Since that change,
the GHES driver sends the signals.

This exposes a problem as errors the GHES driver doesn't understand
or doesn't handle effectively are silently ignored. It will cause
the errors get taken again, and circulate endlessly. User-space task
get stuck in this loop.

Existing firmware on Kunpeng9xx systems reports cache errors with the
'ARM Processor Error' CPER records.

Do memory failure handling for ARM Processor Error Section just like
for Memory Error Section.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>

---
Changes since v5:
- Do some changes following James's suggestions: 1) optimize commit log
2) use err_info->length instead of err_info++' 3) some coding style
advice.

Changes since v4:
- 1. Change the patch name from " ACPI / APEI: do memory failure on the
physical address reported by ARM processor error section" to this
more proper one.
- 2. Add a comment in the code to tell why not filter out corrected
error in an uncorrected section.

Changes since v3:
- Print unhandled error following James Morse's advice.

Changes since v2:
- Updated commit log
---
 drivers/acpi/apei/ghes.c | 81 ++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 64 insertions(+), 17 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index fce7ade..0c8330e 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -441,28 +441,35 @@ static void ghes_kick_task_work(struct callback_head *head)
 	gen_pool_free(ghes_estatus_pool, (unsigned long)estatus_node, node_len);
 }
 
-static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
-				       int sev)
+static bool ghes_do_memory_failure(u64 physical_addr, int flags)
 {
 	unsigned long pfn;
-	int flags = -1;
-	int sec_sev = ghes_severity(gdata->error_severity);
-	struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
 
 	if (!IS_ENABLED(CONFIG_ACPI_APEI_MEMORY_FAILURE))
 		return false;
 
-	if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
-		return false;
-
-	pfn = mem_err->physical_addr >> PAGE_SHIFT;
+	pfn = PHYS_PFN(physical_addr);
 	if (!pfn_valid(pfn)) {
 		pr_warn_ratelimited(FW_WARN GHES_PFX
 		"Invalid address in generic error data: %#llx\n",
-		mem_err->physical_addr);
+		physical_addr);
 		return false;
 	}
 
+	memory_failure_queue(pfn, flags);
+	return true;
+}
+
+static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
+				       int sev)
+{
+	int flags = -1;
+	int sec_sev = ghes_severity(gdata->error_severity);
+	struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
+
+	if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
+		return false;
+
 	/* iff following two events can be handled properly by now */
 	if (sec_sev == GHES_SEV_CORRECTED &&
 	    (gdata->flags & CPER_SEC_ERROR_THRESHOLD_EXCEEDED))
@@ -470,14 +477,56 @@ static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
 	if (sev == GHES_SEV_RECOVERABLE && sec_sev == GHES_SEV_RECOVERABLE)
 		flags = 0;
 
-	if (flags != -1) {
-		memory_failure_queue(pfn, flags);
-		return true;
-	}
+	if (flags != -1)
+		return ghes_do_memory_failure(mem_err->physical_addr, flags);
 
 	return false;
 }
 
+static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, int sev)
+{
+	struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
+	bool queued = false;
+	int sec_sev, i;
+	char *p;
+
+	log_arm_hw_error(err);
+
+	sec_sev = ghes_severity(gdata->error_severity);
+	if (sev != GHES_SEV_RECOVERABLE || sec_sev != GHES_SEV_RECOVERABLE)
+		return false;
+
+	p = (char *)(err + 1);
+	for (i = 0; i < err->err_info_num; i++) {
+		struct cper_arm_err_info *err_info = (struct cper_arm_err_info *)p;
+		bool is_cache = (err_info->type == CPER_ARM_CACHE_ERROR);
+		bool has_pa = (err_info->validation_bits & CPER_ARM_INFO_VALID_PHYSICAL_ADDR);
+		const char *error_type = "unknown error";
+
+		/*
+		 * The field (err_info->error_info & BIT(26)) is fixed to set to
+		 * 1 in some old firmware of HiSilicon Kunpeng920. We assume that
+		 * firmware won't mix corrected errors in an uncorrected section,
+		 * and don't filter out 'corrected' error here.
+		 */
+		if (is_cache && has_pa) {
+			queued = ghes_do_memory_failure(err_info->physical_fault_addr, 0);
+			p += err_info->length;
+			continue;
+		}
+
+		if (err_info->type < ARRAY_SIZE(cper_proc_error_type_strs))
+			error_type = cper_proc_error_type_strs[err_info->type];
+
+		pr_warn_ratelimited(FW_WARN GHES_PFX
+				    "Unhandled processor error type: %s\n",
+				    error_type);
+		p += err_info->length;
+	}
+
+	return queued;
+}
+
 /*
  * PCIe AER errors need to be sent to the AER driver for reporting and
  * recovery. The GHES severities map to the following AER severities and
@@ -605,9 +654,7 @@ static bool ghes_do_proc(struct ghes *ghes,
 			ghes_handle_aer(gdata);
 		}
 		else if (guid_equal(sec_type, &CPER_SEC_PROC_ARM)) {
-			struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
-
-			log_arm_hw_error(err);
+			queued = ghes_handle_arm_hw_error(gdata, sev);
 		} else {
 			void *err = acpi_hest_get_payload(gdata);
 
-- 
2.8.1


             reply	other threads:[~2021-06-09  6:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-09  6:03 Xiaofei Tan [this message]
2021-06-09 13:22 ` [PATCH v6] ACPI / APEI: fix the regression of synchronous external aborts occur in user-mode Rafael J. Wysocki
2021-06-10  6:44   ` Xiaofei Tan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1623218580-41912-1-git-send-email-tanxiaofei@huawei.com \
    --to=tanxiaofei@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=bp@alien8.de \
    --cc=james.morse@arm.com \
    --cc=jroedel@suse.de \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@openeuler.org \
    --cc=peterz@infradead.org \
    --cc=rafael@kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.