patch "serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()" added to tty-testing

patch "serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()" added to tty-testing

[gregkh]

This is a note to let you know that I've just added the patch titled

    serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()

to my tty git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-testing branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will be merged to the tty-next branch sometime soon,
after it passes testing, and the merge window is open.

If you have any questions about this process, please let me know.


From 08a84410a04f05c7c1b8e833f552416d8eb9f6fe Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 10 Jun 2021 20:08:06 +0900
Subject: serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()

Stop dmaengine transfer in sci_stop_tx(). Otherwise, the following
message is possible output when system enters suspend and while
transferring data, because clearing TIE bit in SCSCR is not able to
stop any dmaengine transfer.

    sh-sci e6550000.serial: ttySC1: Unable to drain transmitter

Note that this driver has already used some #ifdef in the .c file
so that this patch also uses #ifdef to fix the issue. Otherwise,
build errors happens if the CONFIG_SERIAL_SH_SCI_DMA is disabled.

Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210610110806.277932-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sh-sci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index df4f70716ba2..aabe66c99c1a 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -611,6 +611,14 @@ static void sci_stop_tx(struct uart_port *port)
 	ctrl &= ~SCSCR_TIE;
 
 	serial_port_out(port, SCSCR, ctrl);
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	if (to_sci_port(port)->chan_tx &&
+	    !dma_submit_error(to_sci_port(port)->cookie_tx)) {
+		dmaengine_terminate_async(to_sci_port(port)->chan_tx);
+		to_sci_port(port)->cookie_tx = -EINVAL;
+	}
+#endif
 }
 
 static void sci_start_rx(struct uart_port *port)
-- 
2.32.0