From: Launchpad Bug Tracker <1799766@bugs.launchpad.net>
To: qemu-devel@nongnu.org
Subject: [Bug 1799766] Re: -device does not work as -drive do
Date: Sun, 20 Jun 2021 04:17:26 -0000 [thread overview]
Message-ID: <162416264691.7948.5132803928776909031.malone@loganberry.canonical.com> (raw)
In-Reply-To: 154040720342.20108.15765705817940864119.malonedeb@gac.canonical.com
[Expired for QEMU because there has been no activity for 60 days.]
** Changed in: qemu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1799766
Title:
-device does not work as -drive do
Status in QEMU:
Expired
Bug description:
Copy/paste of https://stackoverflow.com/questions/52929723/qemu-eject-
complains-device-is-not-found-while-it-is-there , since I found this
bug trying to find an answer to an own question on Stack Overflow.
Below, what was my question the answer I wrote, all exposes the bug.
====================================================================
I need to eject a floppy from QEmu 3.0 monitor, but the command surprisingly fails complaining the device is not found, while it is really there.
Listing of devices:
(qemu) info block
fda: dos-6-22/Dos622-1.img (raw)
Attached to: /machine/unattached/device[11]
Removable device: not locked, tray closed
Cache mode: writeback
hda: hda.img (raw)
Attached to: /machine/peripheral-anon/device[1]
Cache mode: writeback
Eject command result:
(qemu) eject fda
Device 'fda' not found
This is so although this documentation says this is how I have to do:
https://www.linux-kvm.org/page/Change_cdrom (just that I want to eject
the floppy instead of the CD‑ROM).
The `change` command complains the same:
(qemu) change fda dos-6-22/Dos622-2.img raw
Device 'fda' not found
Is this a bug or me doing something wrong?
I tried using different node names, with always the same result.
====================================================================
I’m posting as an answer, but I’m not strictly sure. I can just say,
if I understand correctly, this is a bug.
The answer comes in two parts.
First part, is a stripped down failing invocation:
qemu-system-i386 \
-monitor stdio \
-machine type=isapc,vmport=off \
-blockdev driver=file,node-name=fda-img,filename=fda.img \
-blockdev driver=raw,node-name=fda,file=fda-img \
-global isa-fdc.driveA=fda
(qemu) info block
ide1-cd0: [not inserted]
Attached to: /machine/unattached/device[19]
Removable device: not locked, tray closed
sd0: [not inserted]
Removable device: not locked, tray closed
fda: fda.img (raw)
Attached to: /machine/unattached/device[13]
Removable device: not locked, tray closed
Cache mode: writeback
(qemu) eject fda
Device 'fda' not found
Second part, is the same without the last argument `-global isa-
fdc.driveA=fda`:
qemu-system-i386 \
-monitor stdio \
-machine type=isapc,vmport=off \
-blockdev driver=file,node-name=fda-img,filename=fda.img \
-blockdev driver=raw,node-name=fda,file=fda-img
(qemu) info block
ide1-cd0: [not inserted]
Attached to: /machine/unattached/device[19]
Removable device: not locked, tray closed
floppy0: [not inserted]
Attached to: /machine/unattached/device[13]
Removable device: not locked, tray closed
sd0: [not inserted]
Removable device: not locked, tray closed
(qemu) eject floppy0
There is more error when `-global isa-fdc.driveA=fda` is removed.
However, the documentation says:
> -global driver=driver,property=property,value=value
> Set default value of driver’s property prop to value, e.g.:
> qemu-system-i386 -global ide-hd.physical_block_size=4096 disk-image.img
> In particular, you can **use this to set driver properties for devices which are created automatically by the machine model**. To create a device which is not created automatically and set properties on it, use -device.
> -global driver.prop=value is shorthand for -global
driver=driver,property=prop,value=value. The longhand syntax works
even when driver contains a dot.
What I put a stress on in the quote, suggest I’m not misusing
`-global` and that’s most probably a bug.
**Update for more details:**
It seems using `-drive` instead of `-device` and `driveA` assignment,
the result is not the same, although RedHat documentation recommands
using `-device` instead of `-drive` and QEmu 3.0 documentation says
`-drive` is essentially a shortcut for `-device` (“essentially”, not
telling about the difference).
Below, two cases, with an except of `info block` and an excerpt of
`info qtree`.
With this one, `eject floppy0` works:
qemu-system-i386 \
-monitor stdio \
-machine type=isapc,vmport=off \
-drive format=raw,if=floppy,media=disk,file=fda.img \
-device isa-vga,vgamem_mb=1 \
-serial msmouse
[…]
floppy0 (#block156): fda.img (raw)
Attached to: /machine/unattached/device[12]
Removable device: not locked, tray closed
Cache mode: writeback
[…]
dev: isa-fdc, id ""
iobase = 1008 (0x3f0)
irq = 6 (0x6)
dma = 2 (0x2)
driveA = ""
driveB = ""
check_media_rate = true
fdtypeA = "auto"
fdtypeB = "auto"
fallback = "288"
isa irq 6
bus: floppy-bus.0
type floppy-bus
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
logical_block_size = 512 (0x200)
physical_block_size = 512 (0x200)
min_io_size = 0 (0x0)
opt_io_size = 0 (0x0)
discard_granularity = 4294967295 (0xffffffff)
write-cache = "auto"
share-rw = false
drive-type = "144"
With this one, `eject fda` does not work:
qemu-system-i386 \
-monitor stdio \
-machine type=isapc,vmport=off \
-blockdev driver=file,node-name=fda-img,filename=fda.img \
-blockdev driver=raw,node-name=fda,file=fda-img \
-global isa-fdc.driveA=fda \
-device isa-vga,vgamem_mb=1 \
-serial msmouse
[…]
fda: fda.img (raw)
Attached to: /machine/unattached/device[12]
Removable device: not locked, tray closed
Cache mode: writeback
[…]
dev: isa-fdc, id ""
iobase = 1008 (0x3f0)
irq = 6 (0x6)
dma = 2 (0x2)
driveA = ""
driveB = ""
check_media_rate = true
fdtypeA = "auto"
fdtypeB = "auto"
fallback = "288"
isa irq 6
bus: floppy-bus.0
type floppy-bus
dev: floppy, id ""
unit = 0 (0x0)
drive = "fda"
logical_block_size = 512 (0x200)
physical_block_size = 512 (0x200)
min_io_size = 0 (0x0)
opt_io_size = 0 (0x0)
discard_granularity = 4294967295 (0xffffffff)
write-cache = "auto"
share-rw = false
drive-type = "144"
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1799766/+subscriptions
prev parent reply other threads:[~2021-06-20 4:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 18:53 [Qemu-devel] [Bug 1799766] [NEW] -device does not work as -drive do Hibou57 (Yannick Duchêne)
2018-10-25 15:46 ` [Qemu-devel] [Bug 1799766] " Max Reitz
2018-10-25 17:30 ` Hibou57 (Yannick Duchêne)
2021-04-20 8:08 ` Thomas Huth
2021-06-20 4:17 ` Launchpad Bug Tracker [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=162416264691.7948.5132803928776909031.malone@loganberry.canonical.com \
--to=1799766@bugs.launchpad.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.