All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <gakhil@marvell.com>, Thomas Monjalon <thomas@monjalon.net>
Cc: Anoob Joseph <anoobj@marvell.com>,
	Jerin Jacob <jerinj@marvell.com>,
	"Ankur Dwivedi" <adwivedi@marvell.com>,
	Tejasree Kondoj <ktejasree@marvell.com>, <dev@dpdk.org>,
	Archana Muniganti <marchana@marvell.com>
Subject: [dpdk-dev] [PATCH v2 08/20] crypto/cnxk: add cipher operation in session
Date: Fri, 25 Jun 2021 11:26:19 +0530	[thread overview]
Message-ID: <1624600591-29841-9-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1624600591-29841-1-git-send-email-anoobj@marvell.com>

Add support for cipher operation in session.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
 drivers/crypto/cnxk/cnxk_cryptodev_ops.c |   3 +
 drivers/crypto/cnxk/cnxk_se.h            | 106 +++++++++++++++++++++++++++++++
 2 files changed, 109 insertions(+)

diff --git a/drivers/crypto/cnxk/cnxk_cryptodev_ops.c b/drivers/crypto/cnxk/cnxk_cryptodev_ops.c
index 8ef0e6f..b6d3076 100644
--- a/drivers/crypto/cnxk/cnxk_cryptodev_ops.c
+++ b/drivers/crypto/cnxk/cnxk_cryptodev_ops.c
@@ -457,6 +457,9 @@ sym_session_configure(struct roc_cpt *roc_cpt, int driver_id,
 	sess_priv = priv;
 
 	switch (ret) {
+	case CNXK_CPT_CIPHER:
+		ret = fill_sess_cipher(xform, sess_priv);
+		break;
 	default:
 		ret = -1;
 	}
diff --git a/drivers/crypto/cnxk/cnxk_se.h b/drivers/crypto/cnxk/cnxk_se.h
index 9cccab0..b5a16c4 100644
--- a/drivers/crypto/cnxk/cnxk_se.h
+++ b/drivers/crypto/cnxk/cnxk_se.h
@@ -28,4 +28,110 @@ struct cnxk_se_sess {
 	struct roc_se_ctx roc_se_ctx;
 } __rte_cache_aligned;
 
+static __rte_always_inline int
+fill_sess_cipher(struct rte_crypto_sym_xform *xform, struct cnxk_se_sess *sess)
+{
+	struct rte_crypto_cipher_xform *c_form;
+	roc_se_cipher_type enc_type = 0; /* NULL Cipher type */
+	uint32_t cipher_key_len = 0;
+	uint8_t zsk_flag = 0, aes_ctr = 0, is_null = 0;
+
+	c_form = &xform->cipher;
+
+	if (c_form->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+		sess->cpt_op |= ROC_SE_OP_CIPHER_ENCRYPT;
+	else if (c_form->op == RTE_CRYPTO_CIPHER_OP_DECRYPT) {
+		sess->cpt_op |= ROC_SE_OP_CIPHER_DECRYPT;
+		if (xform->next != NULL &&
+		    xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+			/* Perform decryption followed by auth verify */
+			sess->roc_se_ctx.template_w4.s.opcode_minor =
+				ROC_SE_FC_MINOR_OP_HMAC_FIRST;
+		}
+	} else {
+		plt_dp_err("Unknown cipher operation\n");
+		return -1;
+	}
+
+	switch (c_form->algo) {
+	case RTE_CRYPTO_CIPHER_AES_CBC:
+		enc_type = ROC_SE_AES_CBC;
+		cipher_key_len = 16;
+		break;
+	case RTE_CRYPTO_CIPHER_3DES_CBC:
+		enc_type = ROC_SE_DES3_CBC;
+		cipher_key_len = 24;
+		break;
+	case RTE_CRYPTO_CIPHER_DES_CBC:
+		/* DES is implemented using 3DES in hardware */
+		enc_type = ROC_SE_DES3_CBC;
+		cipher_key_len = 8;
+		break;
+	case RTE_CRYPTO_CIPHER_AES_CTR:
+		enc_type = ROC_SE_AES_CTR;
+		cipher_key_len = 16;
+		aes_ctr = 1;
+		break;
+	case RTE_CRYPTO_CIPHER_NULL:
+		enc_type = 0;
+		is_null = 1;
+		break;
+	case RTE_CRYPTO_CIPHER_KASUMI_F8:
+		enc_type = ROC_SE_KASUMI_F8_ECB;
+		cipher_key_len = 16;
+		zsk_flag = ROC_SE_K_F8;
+		break;
+	case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
+		enc_type = ROC_SE_SNOW3G_UEA2;
+		cipher_key_len = 16;
+		zsk_flag = ROC_SE_ZS_EA;
+		break;
+	case RTE_CRYPTO_CIPHER_ZUC_EEA3:
+		enc_type = ROC_SE_ZUC_EEA3;
+		cipher_key_len = 16;
+		zsk_flag = ROC_SE_ZS_EA;
+		break;
+	case RTE_CRYPTO_CIPHER_AES_XTS:
+		enc_type = ROC_SE_AES_XTS;
+		cipher_key_len = 16;
+		break;
+	case RTE_CRYPTO_CIPHER_3DES_ECB:
+		enc_type = ROC_SE_DES3_ECB;
+		cipher_key_len = 24;
+		break;
+	case RTE_CRYPTO_CIPHER_AES_ECB:
+		enc_type = ROC_SE_AES_ECB;
+		cipher_key_len = 16;
+		break;
+	case RTE_CRYPTO_CIPHER_3DES_CTR:
+	case RTE_CRYPTO_CIPHER_AES_F8:
+	case RTE_CRYPTO_CIPHER_ARC4:
+		plt_dp_err("Crypto: Unsupported cipher algo %u", c_form->algo);
+		return -1;
+	default:
+		plt_dp_err("Crypto: Undefined cipher algo %u specified",
+			   c_form->algo);
+		return -1;
+	}
+
+	if (c_form->key.length < cipher_key_len) {
+		plt_dp_err("Invalid cipher params keylen %u",
+			   c_form->key.length);
+		return -1;
+	}
+
+	sess->zsk_flag = zsk_flag;
+	sess->aes_gcm = 0;
+	sess->aes_ctr = aes_ctr;
+	sess->iv_offset = c_form->iv.offset;
+	sess->iv_length = c_form->iv.length;
+	sess->is_null = is_null;
+
+	if (unlikely(roc_se_ciph_key_set(&sess->roc_se_ctx, enc_type,
+					 c_form->key.data, c_form->key.length,
+					 NULL)))
+		return -1;
+
+	return 0;
+}
 #endif /*_CNXK_SE_H_ */
-- 
2.7.4


  parent reply	other threads:[~2021-06-25  5:58 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <http://patches.dpdk.org/project/dpdk/cover/1622652221-22732-1-git-send-email-anoobj@marvell.com/>
2021-06-25  5:56 ` [dpdk-dev] [PATCH v2 00/20] Add Marvell CNXK crypto PMDs Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 01/20] crypto/cnxk: add driver skeleton Anoob Joseph
2021-07-08 17:08     ` Ali Alnubani
2021-07-08 20:15       ` David Marchand
2021-07-09 15:22         ` David Marchand
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 02/20] crypto/cnxk: add probe and remove Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 03/20] crypto/cnxk: add device control ops Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 04/20] crypto/cnxk: add queue pair ops Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 05/20] crypto/cnxk: add session ops framework Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 06/20] crypto/cnxk: add enqueue burst op Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 07/20] crypto/cnxk: add dequeue " Anoob Joseph
2021-06-25  5:56   ` Anoob Joseph [this message]
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 09/20] crypto/cnxk: add auth operation in session Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 10/20] crypto/cnxk: add aead " Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 11/20] crypto/cnxk: add chained " Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 12/20] crypto/cnxk: add flexi crypto cipher encrypt Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 13/20] crypto/cnxk: add flexi crypto cipher decrypt Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 14/20] crypto/cnxk: add ZUC and SNOW3G encrypt Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 15/20] crypto/cnxk: add ZUC and SNOW3G decrypt Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 16/20] crypto/cnxk: add KASUMI encrypt Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 17/20] crypto/cnxk: add KASUMI decrypt Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 18/20] crypto/cnxk: add digest support Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 19/20] crypto/cnxk: add symmetric crypto capabilities Anoob Joseph
2021-06-25  5:56   ` [dpdk-dev] [PATCH v2 20/20] test/crypto: enable cnxk crypto PMDs Anoob Joseph
2021-06-28 19:19   ` [dpdk-dev] [PATCH v2 00/20] Add Marvell CNXK " Akhil Goyal
2021-06-28 20:31     ` Akhil Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1624600591-29841-9-git-send-email-anoobj@marvell.com \
    --to=anoobj@marvell.com \
    --cc=adwivedi@marvell.com \
    --cc=dev@dpdk.org \
    --cc=gakhil@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=ktejasree@marvell.com \
    --cc=marchana@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.