All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH V3] mmc: sdhci-msm: Update the software timeout value for sdhc
@ 2021-07-05 15:50 Shaik Sajida Bhanu
  2021-07-15  5:29 ` Adrian Hunter
  0 siblings, 1 reply; 3+ messages in thread
From: Shaik Sajida Bhanu @ 2021-07-05 15:50 UTC (permalink / raw)
  To: adrian.hunter, ulf.hansson
  Cc: asutoshd, stummala, vbadigan, rampraka, sayalil, sartgarg,
	rnayak, cang, pragalla, nitirawa, linux-mmc, linux-kernel,
	linux-arm-msm, agross, bjorn.andersson, robh+dt,
	Shaik Sajida Bhanu

Whenever SDHC run at clock rate 50MHZ or below, the hardware data
timeout value will be 21.47secs, which is approx. 22secs and we have
a current software timeout value as 10secs. We have to set software
timeout value more than the hardware data timeout value to avioid seeing
the below register dumps.

[  332.953670] mmc2: Timeout waiting for hardware interrupt.
[  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  0x00007202
[  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000001
[  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000027
[  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 0x0000001f
[  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
[  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
[  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x0000808f
[  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 0x00000000
[  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
[  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
0x0000000ffffff218
[  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
-----------
[  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c | DLL cfg2: 0x0020a000
[  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00000000 | DDR cfg: 0x80040873
[  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
[  333.102371] mmc2: sdhci: ============================================

So, set software timeout value more than hardware timeout value.

Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
---

Changes since V2:
	- Updated 22 with 22LL to avoid compiler warning as suggested by
	  Adrian Hunter.
	- Added a check to update software data timeout value if its value is
	  less than the calculated hardware data timeout value as suggested
	  by Veerabhadrarao Badiganti.

Changes since V1:
	- Moved software data timeout update part to qcom specific file
	  as suggested by Veerabhadrarao Badiganti.
---
 drivers/mmc/host/sdhci-msm.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index e44b7a6..64fb85e 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -2089,6 +2089,23 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
 	sdhci_cqe_disable(mmc, recovery);
 }
 
+static void sdhci_msm_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+{
+
+	u32 count, start = 15;
+
+	__sdhci_set_timeout(host, cmd);
+	count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL);
+	/*
+	 * Update software timeout value if its value is less than hardware data
+	 * timeout value. Qcom SoC hardware data timeout value was calculated
+	 * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock.
+	 */
+	if (cmd && cmd->data && host->clock > 400000 && host->clock <= 50000000
+			&& ((1 << (count + start)) > (10 * host->clock)))
+		host->data_timeout = 22LL * NSEC_PER_SEC;
+}
+
 static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
 	.enable		= sdhci_msm_cqe_enable,
 	.disable	= sdhci_msm_cqe_disable,
@@ -2438,6 +2455,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
 	.irq	= sdhci_msm_cqe_irq,
 	.dump_vendor_regs = sdhci_msm_dump_vendor_regs,
 	.set_power = sdhci_set_power_noreg,
+	.set_timeout = sdhci_msm_set_timeout,
 };
 
 static const struct sdhci_pltfm_data sdhci_msm_pdata = {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH V3] mmc: sdhci-msm: Update the software timeout value for sdhc
  2021-07-05 15:50 [PATCH V3] mmc: sdhci-msm: Update the software timeout value for sdhc Shaik Sajida Bhanu
@ 2021-07-15  5:29 ` Adrian Hunter
  2021-07-16  6:18   ` sbhanu
  0 siblings, 1 reply; 3+ messages in thread
From: Adrian Hunter @ 2021-07-15  5:29 UTC (permalink / raw)
  To: Shaik Sajida Bhanu, ulf.hansson
  Cc: asutoshd, stummala, vbadigan, rampraka, sayalil, sartgarg,
	rnayak, cang, pragalla, nitirawa, linux-mmc, linux-kernel,
	linux-arm-msm, agross, bjorn.andersson, robh+dt

On 5/07/21 6:50 pm, Shaik Sajida Bhanu wrote:
> Whenever SDHC run at clock rate 50MHZ or below, the hardware data
> timeout value will be 21.47secs, which is approx. 22secs and we have
> a current software timeout value as 10secs. We have to set software
> timeout value more than the hardware data timeout value to avioid seeing
> the below register dumps.
> 
> [  332.953670] mmc2: Timeout waiting for hardware interrupt.
> [  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
> [  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  0x00007202
> [  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000001
> [  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000027
> [  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 0x0000001f
> [  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
> [  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
> [  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
> [  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
> [  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
> [  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x0000808f
> [  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 0x00000000
> [  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
> [  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
> [  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
> [  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
> 0x0000000ffffff218
> [  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
> -----------
> [  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
> 0x6000642c | DLL cfg2: 0x0020a000
> [  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
> 0x00000000 | DDR cfg: 0x80040873
> [  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
> 0xf88218a8 Vndr func3: 0x02626040
> [  333.102371] mmc2: sdhci: ============================================
> 
> So, set software timeout value more than hardware timeout value.
> 
> Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>

A couple of minor nitpicks below.  Fix those and you can add:

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
> 
> Changes since V2:
> 	- Updated 22 with 22LL to avoid compiler warning as suggested by
> 	  Adrian Hunter.
> 	- Added a check to update software data timeout value if its value is
> 	  less than the calculated hardware data timeout value as suggested
> 	  by Veerabhadrarao Badiganti.
> 
> Changes since V1:
> 	- Moved software data timeout update part to qcom specific file
> 	  as suggested by Veerabhadrarao Badiganti.
> ---
>  drivers/mmc/host/sdhci-msm.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index e44b7a6..64fb85e 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -2089,6 +2089,23 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
>  	sdhci_cqe_disable(mmc, recovery);
>  }
>  
> +static void sdhci_msm_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> +{
> +

Unnecessary blank line.

> +	u32 count, start = 15;
> +
> +	__sdhci_set_timeout(host, cmd);
> +	count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL);
> +	/*
> +	 * Update software timeout value if its value is less than hardware data
> +	 * timeout value. Qcom SoC hardware data timeout value was calculated
> +	 * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock.
> +	 */
> +	if (cmd && cmd->data && host->clock > 400000 && host->clock <= 50000000
> +			&& ((1 << (count + start)) > (10 * host->clock)))

'&&' is better at the end of the previous line

Also fewer parenthesis is more readable e.g.

	if (cmd && cmd->data && host->clock > 400000 &&
	    host->clock <= 50000000 &&
	    (1 << (count + start)) > (10 * host->clock))

> +		host->data_timeout = 22LL * NSEC_PER_SEC;
> +}
> +
>  static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
>  	.enable		= sdhci_msm_cqe_enable,
>  	.disable	= sdhci_msm_cqe_disable,
> @@ -2438,6 +2455,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
>  	.irq	= sdhci_msm_cqe_irq,
>  	.dump_vendor_regs = sdhci_msm_dump_vendor_regs,
>  	.set_power = sdhci_set_power_noreg,
> +	.set_timeout = sdhci_msm_set_timeout,
>  };
>  
>  static const struct sdhci_pltfm_data sdhci_msm_pdata = {
> 


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH V3] mmc: sdhci-msm: Update the software timeout value for sdhc
  2021-07-15  5:29 ` Adrian Hunter
@ 2021-07-16  6:18   ` sbhanu
  0 siblings, 0 replies; 3+ messages in thread
From: sbhanu @ 2021-07-16  6:18 UTC (permalink / raw)
  To: Adrian Hunter
  Cc: ulf.hansson, asutoshd, stummala, vbadigan, rampraka, sayalil,
	sartgarg, rnayak, cang, pragalla, nitirawa, linux-mmc,
	linux-kernel, linux-arm-msm, agross, bjorn.andersson, robh+dt

On 2021-07-15 10:59, Adrian Hunter wrote:
> On 5/07/21 6:50 pm, Shaik Sajida Bhanu wrote:
>> Whenever SDHC run at clock rate 50MHZ or below, the hardware data
>> timeout value will be 21.47secs, which is approx. 22secs and we have
>> a current software timeout value as 10secs. We have to set software
>> timeout value more than the hardware data timeout value to avioid 
>> seeing
>> the below register dumps.
>> 
>> [  332.953670] mmc2: Timeout waiting for hardware interrupt.
>> [  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP 
>> ===========
>> [  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  
>> 0x00007202
>> [  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  
>> 0x00000001
>> [  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 
>> 0x00000027
>> [  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 
>> 0x0000001f
>> [  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  
>> 0x00000000
>> [  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    
>> 0x00000007
>> [  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 
>> 0x00000000
>> [  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 
>> 0x03ff100b
>> [  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 
>> 0x00000000
>> [  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   
>> 0x0000808f
>> [  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 
>> 0x00000000
>> [  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  
>> 0x00000000
>> [  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  
>> 0x00000000
>> [  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
>> [  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
>> 0x0000000ffffff218
>> [  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
>> -----------
>> [  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
>> 0x6000642c | DLL cfg2: 0x0020a000
>> [  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
>> 0x00000000 | DDR cfg: 0x80040873
>> [  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
>> 0xf88218a8 Vndr func3: 0x02626040
>> [  333.102371] mmc2: sdhci: 
>> ============================================
>> 
>> So, set software timeout value more than hardware timeout value.
>> 
>> Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
> 
> A couple of minor nitpicks below.  Fix those and you can add:
> 
> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> 
>> ---
>> 
>> Changes since V2:
>> 	- Updated 22 with 22LL to avoid compiler warning as suggested by
>> 	  Adrian Hunter.
>> 	- Added a check to update software data timeout value if its value is
>> 	  less than the calculated hardware data timeout value as suggested
>> 	  by Veerabhadrarao Badiganti.
>> 
>> Changes since V1:
>> 	- Moved software data timeout update part to qcom specific file
>> 	  as suggested by Veerabhadrarao Badiganti.
>> ---
>>  drivers/mmc/host/sdhci-msm.c | 18 ++++++++++++++++++
>>  1 file changed, 18 insertions(+)
>> 
>> diff --git a/drivers/mmc/host/sdhci-msm.c 
>> b/drivers/mmc/host/sdhci-msm.c
>> index e44b7a6..64fb85e 100644
>> --- a/drivers/mmc/host/sdhci-msm.c
>> +++ b/drivers/mmc/host/sdhci-msm.c
>> @@ -2089,6 +2089,23 @@ static void sdhci_msm_cqe_disable(struct 
>> mmc_host *mmc, bool recovery)
>>  	sdhci_cqe_disable(mmc, recovery);
>>  }
>> 
>> +static void sdhci_msm_set_timeout(struct sdhci_host *host, struct 
>> mmc_command *cmd)
>> +{
>> +
> 
> Unnecessary blank line.
Sure i will address this in my next patch set , Thanks for the review.
> 
>> +	u32 count, start = 15;
>> +
>> +	__sdhci_set_timeout(host, cmd);
>> +	count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL);
>> +	/*
>> +	 * Update software timeout value if its value is less than hardware 
>> data
>> +	 * timeout value. Qcom SoC hardware data timeout value was 
>> calculated
>> +	 * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock.
>> +	 */
>> +	if (cmd && cmd->data && host->clock > 400000 && host->clock <= 
>> 50000000
>> +			&& ((1 << (count + start)) > (10 * host->clock)))
> 
> '&&' is better at the end of the previous line
> 
> Also fewer parenthesis is more readable e.g.
> 
> 	if (cmd && cmd->data && host->clock > 400000 &&
> 	    host->clock <= 50000000 &&
> 	    (1 << (count + start)) > (10 * host->clock))
> 
Sure i will address this in my next patch set , Thanks for the review.
>> +		host->data_timeout = 22LL * NSEC_PER_SEC;
>> +}
>> +
>>  static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
>>  	.enable		= sdhci_msm_cqe_enable,
>>  	.disable	= sdhci_msm_cqe_disable,
>> @@ -2438,6 +2455,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
>>  	.irq	= sdhci_msm_cqe_irq,
>>  	.dump_vendor_regs = sdhci_msm_dump_vendor_regs,
>>  	.set_power = sdhci_set_power_noreg,
>> +	.set_timeout = sdhci_msm_set_timeout,
>>  };
>> 
>>  static const struct sdhci_pltfm_data sdhci_msm_pdata = {
>> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-07-16  6:18 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-05 15:50 [PATCH V3] mmc: sdhci-msm: Update the software timeout value for sdhc Shaik Sajida Bhanu
2021-07-15  5:29 ` Adrian Hunter
2021-07-16  6:18   ` sbhanu

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.