All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chengwen Feng <fengchengwen@huawei.com>
To: <thomas@monjalon.net>, <ferruh.yigit@intel.com>,
	<bruce.richardson@intel.com>, <jerinj@marvell.com>,
	<jerinjacobk@gmail.com>, <andrew.rybchenko@oktetlabs.ru>
Cc: <dev@dpdk.org>, <mb@smartsharesystems.com>, <nipun.gupta@nxp.com>,
	<hemant.agrawal@nxp.com>, <maxime.coquelin@redhat.com>,
	<honnappa.nagarahalli@arm.com>, <david.marchand@redhat.com>,
	<sburla@marvell.com>, <pkapoor@marvell.com>,
	<konstantin.ananyev@intel.com>
Subject: [dpdk-dev] [PATCH v3] dmadev: introduce DMA device library
Date: Tue, 13 Jul 2021 20:27:43 +0800	[thread overview]
Message-ID: <1626179263-14645-1-git-send-email-fengchengwen@huawei.com> (raw)
In-Reply-To: <1625231891-2963-1-git-send-email-fengchengwen@huawei.com>

This patch introduce 'dmadevice' which is a generic type of DMA
device.

The APIs of dmadev library exposes some generic operations which can
enable configuration and I/O with the DMA devices.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
---
v3:
* rm reset and fill_sg ops.
* rm MT-safe capabilities.
* add submit flag.
* redefine rte_dma_sg to implement asymmetric copy.
* delete some reserved field for future use.
* rearrangement rte_dmadev/rte_dmadev_data struct.
* refresh rte_dmadev.h copyright.
* update vchan setup parameter.
* modified some inappropriate descriptions.
* arrange version.map alphabetically.
* other minor modifications from review comment.
---
 MAINTAINERS                  |   4 +
 config/rte_config.h          |   3 +
 lib/dmadev/meson.build       |   7 +
 lib/dmadev/rte_dmadev.c      | 561 +++++++++++++++++++++++++
 lib/dmadev/rte_dmadev.h      | 968 +++++++++++++++++++++++++++++++++++++++++++
 lib/dmadev/rte_dmadev_core.h | 161 +++++++
 lib/dmadev/rte_dmadev_pmd.h  |  72 ++++
 lib/dmadev/version.map       |  37 ++
 lib/meson.build              |   1 +
 9 files changed, 1814 insertions(+)
 create mode 100644 lib/dmadev/meson.build
 create mode 100644 lib/dmadev/rte_dmadev.c
 create mode 100644 lib/dmadev/rte_dmadev.h
 create mode 100644 lib/dmadev/rte_dmadev_core.h
 create mode 100644 lib/dmadev/rte_dmadev_pmd.h
 create mode 100644 lib/dmadev/version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index af2a91d..e01a07f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -495,6 +495,10 @@ F: drivers/raw/skeleton/
 F: app/test/test_rawdev.c
 F: doc/guides/prog_guide/rawdev.rst
 
+DMA device API - EXPERIMENTAL
+M: Chengwen Feng <fengchengwen@huawei.com>
+F: lib/dmadev/
+
 
 Memory Pool Drivers
 -------------------
diff --git a/config/rte_config.h b/config/rte_config.h
index 590903c..331a431 100644
--- a/config/rte_config.h
+++ b/config/rte_config.h
@@ -81,6 +81,9 @@
 /* rawdev defines */
 #define RTE_RAWDEV_MAX_DEVS 64
 
+/* dmadev defines */
+#define RTE_DMADEV_MAX_DEVS 64
+
 /* ip_fragmentation defines */
 #define RTE_LIBRTE_IP_FRAG_MAX_FRAG 4
 #undef RTE_LIBRTE_IP_FRAG_TBL_STAT
diff --git a/lib/dmadev/meson.build b/lib/dmadev/meson.build
new file mode 100644
index 0000000..d2fc85e
--- /dev/null
+++ b/lib/dmadev/meson.build
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2021 HiSilicon Limited.
+
+sources = files('rte_dmadev.c')
+headers = files('rte_dmadev.h')
+indirect_headers += files('rte_dmadev_core.h')
+driver_sdk_headers += files('rte_dmadev_pmd.h')
diff --git a/lib/dmadev/rte_dmadev.c b/lib/dmadev/rte_dmadev.c
new file mode 100644
index 0000000..1bca463
--- /dev/null
+++ b/lib/dmadev/rte_dmadev.c
@@ -0,0 +1,561 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 HiSilicon Limited.
+ * Copyright(c) 2021 Intel Corporation.
+ */
+
+#include <ctype.h>
+#include <inttypes.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <rte_debug.h>
+#include <rte_dev.h>
+#include <rte_eal.h>
+#include <rte_errno.h>
+#include <rte_lcore.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_malloc.h>
+#include <rte_string_fns.h>
+
+#include "rte_dmadev.h"
+#include "rte_dmadev_pmd.h"
+
+struct rte_dmadev rte_dmadevices[RTE_DMADEV_MAX_DEVS];
+
+static const char *MZ_RTE_DMADEV_DATA = "rte_dmadev_data";
+/* Shared memory between primary and secondary processes. */
+static struct {
+	struct rte_dmadev_data data[RTE_DMADEV_MAX_DEVS];
+} *dmadev_shared_data;
+
+RTE_LOG_REGISTER(rte_dmadev_logtype, lib.dmadev, INFO);
+#define RTE_DMADEV_LOG(level, ...) \
+	rte_log(RTE_LOG_ ## level, rte_dmadev_logtype, "" __VA_ARGS__)
+
+/* Macros to check for valid device id */
+#define RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, retval) do { \
+	if (!rte_dmadev_is_valid_dev(dev_id)) { \
+		RTE_DMADEV_LOG(ERR, "Invalid dev_id=%u\n", dev_id); \
+		return retval; \
+	} \
+} while (0)
+
+#define RTE_DMADEV_VALID_DEV_ID_OR_RET(dev_id) do { \
+	if (!rte_dmadev_is_valid_dev(dev_id)) { \
+		RTE_DMADEV_LOG(ERR, "Invalid dev_id=%u\n", dev_id); \
+		return; \
+	} \
+} while (0)
+
+/* Macro to check for invalid pointers */
+#define RTE_DMADEV_PTR_OR_ERR_RET(ptr, retval) do { \
+	if ((ptr) == NULL) \
+		return retval; \
+} while (0)
+
+static int
+dmadev_check_name(const char *name)
+{
+	size_t name_len;
+
+	if (name == NULL) {
+		RTE_DMADEV_LOG(ERR, "Name can't be NULL\n");
+		return -EINVAL;
+	}
+
+	name_len = strnlen(name, RTE_DMADEV_NAME_MAX_LEN);
+	if (name_len == 0) {
+		RTE_DMADEV_LOG(ERR, "Zero length DMA device name\n");
+		return -EINVAL;
+	}
+	if (name_len >= RTE_DMADEV_NAME_MAX_LEN) {
+		RTE_DMADEV_LOG(ERR, "DMA device name is too long\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static uint16_t
+dmadev_find_free_dev(void)
+{
+	uint16_t i;
+
+	for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) {
+		if (dmadev_shared_data->data[i].dev_name[0] == '\0') {
+			RTE_ASSERT(rte_dmadevices[i].state ==
+				   RTE_DMADEV_UNUSED);
+			return i;
+		}
+	}
+
+	return RTE_DMADEV_MAX_DEVS;
+}
+
+static struct rte_dmadev*
+dmadev_find(const char *name)
+{
+	uint16_t i;
+
+	for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) {
+		if ((rte_dmadevices[i].state == RTE_DMADEV_ATTACHED) &&
+		    (!strcmp(name, rte_dmadevices[i].data->dev_name)))
+			return &rte_dmadevices[i];
+	}
+
+	return NULL;
+}
+
+static int
+dmadev_shared_data_prepare(void)
+{
+	const struct rte_memzone *mz;
+
+	if (dmadev_shared_data == NULL) {
+		if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+			/* Allocate port data and ownership shared memory. */
+			mz = rte_memzone_reserve(MZ_RTE_DMADEV_DATA,
+					 sizeof(*dmadev_shared_data),
+					 rte_socket_id(), 0);
+		} else {
+			mz = rte_memzone_lookup(MZ_RTE_DMADEV_DATA);
+		}
+		if (mz == NULL)
+			return -ENOMEM;
+
+		dmadev_shared_data = mz->addr;
+		if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+			memset(dmadev_shared_data->data, 0,
+			       sizeof(dmadev_shared_data->data));
+	}
+
+	return 0;
+}
+
+static struct rte_dmadev *
+dmadev_allocate(const char *name)
+{
+	struct rte_dmadev *dev;
+	uint16_t dev_id;
+
+	dev = dmadev_find(name);
+	if (dev != NULL) {
+		RTE_DMADEV_LOG(ERR, "DMA device already allocated\n");
+		return NULL;
+	}
+
+	dev_id = dmadev_find_free_dev();
+	if (dev_id == RTE_DMADEV_MAX_DEVS) {
+		RTE_DMADEV_LOG(ERR, "Reached maximum number of DMA devices\n");
+		return NULL;
+	}
+
+	if (dmadev_shared_data_prepare() != 0) {
+		RTE_DMADEV_LOG(ERR, "Cannot allocate DMA shared data\n");
+		return NULL;
+	}
+
+	dev = &rte_dmadevices[dev_id];
+	dev->data = &dmadev_shared_data->data[dev_id];
+	dev->data->dev_id = dev_id;
+	strlcpy(dev->data->dev_name, name, sizeof(dev->data->dev_name));
+
+	return dev;
+}
+
+static struct rte_dmadev *
+dmadev_attach_secondary(const char *name)
+{
+	struct rte_dmadev *dev;
+	uint16_t i;
+
+	if (dmadev_shared_data_prepare() != 0) {
+		RTE_DMADEV_LOG(ERR, "Cannot allocate DMA shared data\n");
+		return NULL;
+	}
+
+	for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) {
+		if (!strcmp(dmadev_shared_data->data[i].dev_name, name))
+			break;
+	}
+	if (i == RTE_DMADEV_MAX_DEVS) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %s is not driven by the primary process\n",
+			name);
+		return NULL;
+	}
+
+	dev = &rte_dmadevices[i];
+	dev->data = &dmadev_shared_data->data[i];
+	RTE_ASSERT(dev->data->dev_id == i);
+
+	return dev;
+}
+
+struct rte_dmadev *
+rte_dmadev_pmd_allocate(const char *name)
+{
+	struct rte_dmadev *dev;
+
+	if (dmadev_check_name(name) != 0)
+		return NULL;
+
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+		dev = dmadev_allocate(name);
+	else
+		dev = dmadev_attach_secondary(name);
+
+	if (dev == NULL)
+		return NULL;
+	dev->state = RTE_DMADEV_ATTACHED;
+
+	return dev;
+}
+
+int
+rte_dmadev_pmd_release(struct rte_dmadev *dev)
+{
+	if (dev == NULL)
+		return -EINVAL;
+
+	if (dev->state == RTE_DMADEV_UNUSED)
+		return 0;
+
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+		rte_free(dev->data->dev_private);
+		memset(dev->data, 0, sizeof(struct rte_dmadev_data));
+	}
+
+	memset(dev, 0, sizeof(struct rte_dmadev));
+	dev->state = RTE_DMADEV_UNUSED;
+
+	return 0;
+}
+
+struct rte_dmadev *
+rte_dmadev_get_device_by_name(const char *name)
+{
+	if (dmadev_check_name(name) != 0)
+		return NULL;
+	return dmadev_find(name);
+}
+
+bool
+rte_dmadev_is_valid_dev(uint16_t dev_id)
+{
+	if (dev_id >= RTE_DMADEV_MAX_DEVS ||
+	    rte_dmadevices[dev_id].state != RTE_DMADEV_ATTACHED)
+		return false;
+	return true;
+}
+
+uint16_t
+rte_dmadev_count(void)
+{
+	uint16_t count = 0;
+	uint16_t i;
+
+	for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) {
+		if (rte_dmadevices[i].state == RTE_DMADEV_ATTACHED)
+			count++;
+	}
+
+	return count;
+}
+
+int
+rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info)
+{
+	const struct rte_dmadev *dev;
+	int ret;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_DMADEV_PTR_OR_ERR_RET(dev_info, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_info_get, -ENOTSUP);
+	memset(dev_info, 0, sizeof(struct rte_dmadev_info));
+	ret = (*dev->dev_ops->dev_info_get)(dev, dev_info,
+					    sizeof(struct rte_dmadev_info));
+	if (ret != 0)
+		return ret;
+
+	dev_info->device = dev->device;
+	dev_info->nb_vchans = dev->data->dev_conf.max_vchans;
+
+	return 0;
+}
+
+int
+rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf)
+{
+	struct rte_dmadev_info info;
+	struct rte_dmadev *dev;
+	int ret;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_DMADEV_PTR_OR_ERR_RET(dev_conf, -EINVAL);
+	dev = &rte_dmadevices[dev_id];
+
+	ret = rte_dmadev_info_get(dev_id, &info);
+	if (ret != 0) {
+		RTE_DMADEV_LOG(ERR, "Device %u get device info fail\n", dev_id);
+		return -EINVAL;
+	}
+	if (dev_conf->max_vchans > info.max_vchans) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u configure too many vchans\n", dev_id);
+		return -EINVAL;
+	}
+
+	if (dev->data->dev_started != 0) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u must be stopped to allow configuration\n",
+			dev_id);
+		return -EBUSY;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP);
+	ret = (*dev->dev_ops->dev_configure)(dev, dev_conf);
+	if (ret == 0)
+		memcpy(&dev->data->dev_conf, dev_conf, sizeof(*dev_conf));
+
+	return ret;
+}
+
+int
+rte_dmadev_start(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+	int ret;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	dev = &rte_dmadevices[dev_id];
+
+	if (dev->data->dev_started != 0) {
+		RTE_DMADEV_LOG(WARNING, "Device %u already started\n", dev_id);
+		return 0;
+	}
+
+	if (dev->dev_ops->dev_start == NULL)
+		goto mark_started;
+
+	ret = (*dev->dev_ops->dev_start)(dev);
+	if (ret != 0)
+		return ret;
+
+mark_started:
+	dev->data->dev_started = 1;
+	return 0;
+}
+
+int
+rte_dmadev_stop(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+	int ret;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	dev = &rte_dmadevices[dev_id];
+
+	if (dev->data->dev_started == 0) {
+		RTE_DMADEV_LOG(WARNING, "Device %u already stopped\n", dev_id);
+		return 0;
+	}
+
+	if (dev->dev_ops->dev_stop == NULL)
+		goto mark_stopped;
+
+	ret = (*dev->dev_ops->dev_stop)(dev);
+	if (ret != 0)
+		return ret;
+
+mark_stopped:
+	dev->data->dev_started = 0;
+	return 0;
+}
+
+int
+rte_dmadev_close(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	dev = &rte_dmadevices[dev_id];
+
+	/* Device must be stopped before it can be closed */
+	if (dev->data->dev_started == 1) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u must be stopped before closing\n", dev_id);
+		return -EBUSY;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_close, -ENOTSUP);
+	return (*dev->dev_ops->dev_close)(dev);
+}
+
+int
+rte_dmadev_vchan_setup(uint16_t dev_id,
+		       const struct rte_dmadev_vchan_conf *conf)
+{
+	struct rte_dmadev_info info;
+	struct rte_dmadev *dev;
+	int ret;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_DMADEV_PTR_OR_ERR_RET(conf, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	ret = rte_dmadev_info_get(dev_id, &info);
+	if (ret != 0) {
+		RTE_DMADEV_LOG(ERR, "Device %u get device info fail\n", dev_id);
+		return -EINVAL;
+	}
+	if (conf->direction == 0 ||
+	    conf->direction & ~RTE_DMA_TRANSFER_DIR_ALL) {
+		RTE_DMADEV_LOG(ERR, "Device %u direction invalid!\n", dev_id);
+		return -EINVAL;
+	}
+	if (conf->direction & RTE_DMA_MEM_TO_MEM &&
+	    !(info.dev_capa & RTE_DMA_DEV_CAPA_MEM_TO_MEM)) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u don't support mem2mem transfer\n", dev_id);
+		return -EINVAL;
+	}
+	if (conf->direction & RTE_DMA_MEM_TO_DEV &&
+	    !(info.dev_capa & RTE_DMA_DEV_CAPA_MEM_TO_DEV)) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u don't support mem2dev transfer\n", dev_id);
+		return -EINVAL;
+	}
+	if (conf->direction & RTE_DMA_DEV_TO_MEM &&
+	    !(info.dev_capa & RTE_DMA_DEV_CAPA_DEV_TO_MEM)) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u don't support dev2mem transfer\n", dev_id);
+		return -EINVAL;
+	}
+	if (conf->direction & RTE_DMA_DEV_TO_DEV &&
+	    !(info.dev_capa & RTE_DMA_DEV_CAPA_DEV_TO_DEV)) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u don't support dev2dev transfer\n", dev_id);
+		return -EINVAL;
+	}
+	if (conf->nb_desc < info.min_desc || conf->nb_desc > info.max_desc) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u number of descriptors invalid\n", dev_id);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vchan_setup, -ENOTSUP);
+	return (*dev->dev_ops->vchan_setup)(dev, conf);
+}
+
+int
+rte_dmadev_vchan_release(uint16_t dev_id, uint16_t vchan)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	dev = &rte_dmadevices[dev_id];
+
+	if (vchan >= dev->data->dev_conf.max_vchans) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u vchan %u out of range\n", dev_id, vchan);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vchan_release, -ENOTSUP);
+	return (*dev->dev_ops->vchan_release)(dev, vchan);
+}
+
+int
+rte_dmadev_stats_get(uint16_t dev_id, uint16_t vchan,
+		     struct rte_dmadev_stats *stats)
+{
+	const struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_DMADEV_PTR_OR_ERR_RET(stats, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	if (vchan >= dev->data->dev_conf.max_vchans &&
+	    vchan != RTE_DMADEV_ALL_VCHAN) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u vchan %u out of range\n", dev_id, vchan);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->stats_get, -ENOTSUP);
+	return (*dev->dev_ops->stats_get)(dev, vchan, stats,
+					  sizeof(struct rte_dmadev_stats));
+}
+
+int
+rte_dmadev_stats_reset(uint16_t dev_id, uint16_t vchan)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	dev = &rte_dmadevices[dev_id];
+
+	if (vchan >= dev->data->dev_conf.max_vchans &&
+	    vchan != RTE_DMADEV_ALL_VCHAN) {
+		RTE_DMADEV_LOG(ERR,
+			"Device %u vchan %u out of range\n", dev_id, vchan);
+		return -EINVAL;
+	}
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->stats_reset, -ENOTSUP);
+	return (*dev->dev_ops->stats_reset)(dev, vchan);
+}
+
+int
+rte_dmadev_dump(uint16_t dev_id, FILE *f)
+{
+	const struct rte_dmadev *dev;
+	struct rte_dmadev_info info;
+	int ret;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_DMADEV_PTR_OR_ERR_RET(f, -EINVAL);
+
+	ret = rte_dmadev_info_get(dev_id, &info);
+	if (ret != 0) {
+		RTE_DMADEV_LOG(ERR, "Device %u get device info fail\n", dev_id);
+		return -EINVAL;
+	}
+
+	dev = &rte_dmadevices[dev_id];
+
+	fprintf(f, "DMA Dev %u, '%s' [%s]\n",
+		dev->data->dev_id,
+		dev->data->dev_name,
+		dev->data->dev_started ? "started" : "stopped");
+	fprintf(f, "  dev_capa: 0x%" PRIx64 "\n", info.dev_capa);
+	fprintf(f, "  max_vchans_supported: %u\n", info.max_vchans);
+	fprintf(f, "  max_vchans_configured: %u\n", info.nb_vchans);
+
+	if (dev->dev_ops->dev_dump != NULL)
+		return (*dev->dev_ops->dev_dump)(dev, f);
+
+	return 0;
+}
+
+int
+rte_dmadev_selftest(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_selftest, -ENOTSUP);
+	return (*dev->dev_ops->dev_selftest)(dev_id);
+}
diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h
new file mode 100644
index 0000000..f6cc4e5
--- /dev/null
+++ b/lib/dmadev/rte_dmadev.h
@@ -0,0 +1,968 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 HiSilicon Limited.
+ * Copyright(c) 2021 Intel Corporation.
+ * Copyright(c) 2021 Marvell International Ltd.
+ * Copyright(c) 2021 SmartShare Systems.
+ */
+
+#ifndef _RTE_DMADEV_H_
+#define _RTE_DMADEV_H_
+
+/**
+ * @file rte_dmadev.h
+ *
+ * RTE DMA (Direct Memory Access) device APIs.
+ *
+ * The DMA framework is built on the following model:
+ *
+ *     ---------------   ---------------       ---------------
+ *     | virtual DMA |   | virtual DMA |       | virtual DMA |
+ *     | channel     |   | channel     |       | channel     |
+ *     ---------------   ---------------       ---------------
+ *            |                |                      |
+ *            ------------------                      |
+ *                     |                              |
+ *               ------------                    ------------
+ *               |  dmadev  |                    |  dmadev  |
+ *               ------------                    ------------
+ *                     |                              |
+ *            ------------------               ------------------
+ *            | HW-DMA-channel |               | HW-DMA-channel |
+ *            ------------------               ------------------
+ *                     |                              |
+ *                     --------------------------------
+ *                                     |
+ *                           ---------------------
+ *                           | HW-DMA-Controller |
+ *                           ---------------------
+ *
+ * The DMA controller could have multiple HW-DMA-channels (aka. HW-DMA-queues),
+ * each HW-DMA-channel should be represented by a dmadev.
+ *
+ * The dmadev could create multiple virtual DMA channel, each virtual DMA
+ * channel represents a different transfer context. The DMA operation request
+ * must be submitted to the virtual DMA channel.
+ * E.G. Application could create virtual DMA channel 0 for mem-to-mem transfer
+ *      scenario, and create virtual DMA channel 1 for mem-to-dev transfer
+ *      scenario.
+ *
+ * The dmadev are dynamically allocated by rte_dmadev_pmd_allocate() during the
+ * PCI/SoC device probing phase performed at EAL initialization time. And could
+ * be released by rte_dmadev_pmd_release() during the PCI/SoC device removing
+ * phase.
+ *
+ * This framework uses 'uint16_t dev_id' as the device identifier of a dmadev,
+ * and 'uint16_t vchan' as the virtual DMA channel identifier in one dmadev.
+ *
+ * The functions exported by the dmadev API to setup a device designated by its
+ * device identifier must be invoked in the following order:
+ *     - rte_dmadev_configure()
+ *     - rte_dmadev_vchan_setup()
+ *     - rte_dmadev_start()
+ *
+ * Then, the application can invoke dataplane APIs to process jobs.
+ *
+ * If the application wants to change the configuration (i.e. call
+ * rte_dmadev_configure()), it must call rte_dmadev_stop() first to stop the
+ * device and then do the reconfiguration before calling rte_dmadev_start()
+ * again. The dataplane APIs should not be invoked when the device is stopped.
+ *
+ * Finally, an application can close a dmadev by invoking the
+ * rte_dmadev_close() function.
+ *
+ * The dataplane APIs include two parts:
+ *   a) The first part is the submission of operation requests:
+ *        - rte_dmadev_copy()
+ *        - rte_dmadev_copy_sg() - scatter-gather form of copy
+ *        - rte_dmadev_fill()
+ *        - rte_dmadev_fill_sg() - scatter-gather form of fill
+ *        - rte_dmadev_perform() - issue doorbell to hardware
+ *      These APIs could work with different virtual DMA channels which have
+ *      different contexts.
+ *      The first four APIs are used to submit the operation request to the
+ *      virtual DMA channel, if the submission is successful, a uint16_t
+ *      ring_idx is returned, otherwise a negative number is returned.
+ *   b) The second part is to obtain the result of requests:
+ *        - rte_dmadev_completed()
+ *            - return the number of operation requests completed successfully.
+ *        - rte_dmadev_completed_fails()
+ *            - return the number of operation requests failed to complete.
+ *
+ * About the ring_idx which rte_dmadev_copy/copy_sg/fill/fill_sg() returned,
+ * the rules are as follows:
+ *   a) ring_idx for each virtual DMA channel are independent.
+ *   b) For a virtual DMA channel, the ring_idx is monotonically incremented,
+ *      when it reach UINT16_MAX, it wraps back to zero.
+ *   c) This ring_idx can be used by applications to track per-operation
+ *      metadata in an application-defined circular ring.
+ *   d) The initial ring_idx of a virtual DMA channel is zero, after the device
+ *      is stopped, the ring_idx needs to be reset to zero.
+ *   Example:
+ *      step-1: start one dmadev
+ *      step-2: enqueue a copy operation, the ring_idx return is 0
+ *      step-3: enqueue a copy operation again, the ring_idx return is 1
+ *      ...
+ *      step-101: stop the dmadev
+ *      step-102: start the dmadev
+ *      step-103: enqueue a copy operation, the cookie return is 0
+ *      ...
+ *      step-x+0: enqueue a fill operation, the ring_idx return is 65535
+ *      step-x+1: enqueue a copy operation, the ring_idx return is 0
+ *      ...
+ *
+ * By default, all the functions of the dmadev API exported by a PMD are
+ * lock-free functions which assume to not be invoked in parallel on different
+ * logical cores to work on the same target object.
+ *
+ */
+
+#include <rte_common.h>
+#include <rte_compat.h>
+#ifdef RTE_DMADEV_DEBUG
+#include <rte_dev.h>
+#endif
+#include <rte_errno.h>
+#include <rte_memory.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define RTE_DMADEV_NAME_MAX_LEN	RTE_DEV_NAME_MAX_LEN
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * @param dev_id
+ *   DMA device index.
+ *
+ * @return
+ *   - If the device index is valid (true) or not (false).
+ */
+__rte_experimental
+bool
+rte_dmadev_is_valid_dev(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get the total number of DMA devices that have been successfully
+ * initialised.
+ *
+ * @return
+ *   The total number of usable DMA devices.
+ */
+__rte_experimental
+uint16_t
+rte_dmadev_count(void);
+
+/**
+ * The capabilities of a DMA device
+ */
+#define RTE_DMA_DEV_CAPA_MEM_TO_MEM	(1ull << 0)
+/**< DMA device support memory-to-memory transfer.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+#define RTE_DMA_DEV_CAPA_MEM_TO_DEV	(1ull << 1)
+/**< DMA device support memory-to-device transfer.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+#define RTE_DMA_DEV_CAPA_DEV_TO_MEM	(1ull << 2)
+/**< DMA device support device-to-memory transfer.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+#define RTE_DMA_DEV_CAPA_DEV_TO_DEV	(1ull << 3)
+/**< DMA device support device-to-device transfer.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+#define RTE_DMA_DEV_CAPA_OPS_COPY	(1ull << 4)
+/**< DMA device support copy ops.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+#define RTE_DMA_DEV_CAPA_OPS_FILL	(1ull << 5)
+/**< DMA device support fill ops.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+#define RTE_DMA_DEV_CAPA_OPS_SG		(1ull << 6)
+/**< DMA device support scatter-list ops.
+ * If device support ops_copy and ops_sg, it means supporting copy_sg ops.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+#define RTE_DMA_DEV_CAPA_FENCE		(1ull << 7)
+/**< DMA device support fence.
+ * If device support fence, then application could set a fence flags when
+ * enqueue operation by rte_dma_copy/copy_sg/fill/fill_sg.
+ * If a operation has a fence flags, it means the operation must be processed
+ * only after all previous operations are completed.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+#define RTE_DMA_DEV_CAPA_SVA		(1ull << 8)
+/**< DMA device support SVA which could use VA as DMA address.
+ * If device support SVA then application could pass any VA address like memory
+ * from rte_malloc(), rte_memzone(), malloc, stack memory.
+ * If device don't support SVA, then application should pass IOVA address which
+ * from rte_malloc(), rte_memzone().
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+
+/**
+ * A structure used to retrieve the contextual information of
+ * an DMA device
+ */
+struct rte_dmadev_info {
+	struct rte_device *device; /**< Generic Device information */
+	uint64_t dev_capa; /**< Device capabilities (RTE_DMA_DEV_CAPA_*) */
+	/** Maximum number of virtual DMA channels supported */
+	uint16_t max_vchans;
+	/** Maximum allowed number of virtual DMA channel descriptors */
+	uint16_t max_desc;
+	/** Minimum allowed number of virtual DMA channel descriptors */
+	uint16_t min_desc;
+	uint16_t nb_vchans; /**< Number of virtual DMA channel configured */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the contextual information of a DMA device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param[out] dev_info
+ *   A pointer to a structure of type *rte_dmadev_info* to be filled with the
+ *   contextual information of the device.
+ *
+ * @return
+ *   - =0: Success, driver updates the contextual information of the DMA device
+ *   - <0: Error code returned by the driver info get function.
+ *
+ */
+__rte_experimental
+int
+rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info);
+
+/**
+ * A structure used to configure a DMA device.
+ */
+struct rte_dmadev_conf {
+	/** Maximum number of virtual DMA channel to use.
+	 * This value cannot be greater than the field 'max_vchans' of struct
+	 * rte_dmadev_info which get from rte_dmadev_info_get().
+	 */
+	uint16_t max_vchans;
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Configure a DMA device.
+ *
+ * This function must be invoked first before any other function in the
+ * API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * @param dev_id
+ *   The identifier of the device to configure.
+ * @param dev_conf
+ *   The DMA device configuration structure encapsulated into rte_dmadev_conf
+ *   object.
+ *
+ * @return
+ *   - =0: Success, device configured.
+ *   - <0: Error code returned by the driver configuration function.
+ */
+__rte_experimental
+int
+rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start a DMA device.
+ *
+ * The device start step is the last one and consists of setting the DMA
+ * to start accepting jobs.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   - =0: Success, device started.
+ *   - <0: Error code returned by the driver start function.
+ */
+__rte_experimental
+int
+rte_dmadev_start(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Stop a DMA device.
+ *
+ * The device can be restarted with a call to rte_dmadev_start()
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   - =0: Success, device stopped.
+ *   - <0: Error code returned by the driver stop function.
+ */
+__rte_experimental
+int
+rte_dmadev_stop(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Close a DMA device.
+ *
+ * The device cannot be restarted after this call.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *  - =0: Successfully close device
+ *  - <0: Failure to close device
+ */
+__rte_experimental
+int
+rte_dmadev_close(uint16_t dev_id);
+
+/**
+ * DMA transfer direction defines.
+ */
+#define RTE_DMA_MEM_TO_MEM	(1ull << 0)
+/**< DMA transfer direction - from memory to memory.
+ *
+ * @see struct rte_dmadev_vchan_conf::direction
+ */
+#define RTE_DMA_MEM_TO_DEV	(1ull << 1)
+/**< DMA transfer direction - from memory to device.
+ * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs
+ * through the PCIE interface. In this case, the ARM SoCs works in EP(endpoint)
+ * mode, it could initiate a DMA move request from memory (which is ARM memory)
+ * to device (which is x86 host memory).
+ *
+ * @see struct rte_dmadev_vchan_conf::direction
+ */
+#define RTE_DMA_DEV_TO_MEM	(1ull << 2)
+/**< DMA transfer direction - from device to memory.
+ * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs
+ * through the PCIE interface. In this case, the ARM SoCs works in EP(endpoint)
+ * mode, it could initiate a DMA move request from device (which is x86 host
+ * memory) to memory (which is ARM memory).
+ *
+ * @see struct rte_dmadev_vchan_conf::direction
+ */
+#define RTE_DMA_DEV_TO_DEV	(1ull << 3)
+/**< DMA transfer direction - from device to device.
+ * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs
+ * through the PCIE interface. In this case, the ARM SoCs works in EP(endpoint)
+ * mode, it could initiate a DMA move request from device (which is x86 host
+ * memory) to device (which is another x86 host memory).
+ *
+ * @see struct rte_dmadev_vchan_conf::direction
+ */
+#define RTE_DMA_TRANSFER_DIR_ALL	(RTE_DMA_MEM_TO_MEM | \
+					 RTE_DMA_MEM_TO_DEV | \
+					 RTE_DMA_DEV_TO_MEM | \
+					 RTE_DMA_DEV_TO_DEV)
+
+/**
+ * enum rte_dmadev_port_type - DMA port type defines
+ * When
+ */
+enum rte_dmadev_port_type {
+	/** The device port type is PCIE. */
+	RTE_DMADEV_PORT_OF_PCIE = 1,
+};
+
+/**
+ * A structure used to descript DMA port parameters.
+ */
+struct rte_dmadev_port_parameters {
+	enum rte_dmadev_port_type port_type;
+	union {
+		/** For PCIE port
+		 *
+		 * The following model show SoC's PCIE module connects to
+		 * multiple PCIE hosts and multiple endpoints. The PCIE module
+		 * has an integrate DMA controller.
+		 * If the DMA wants to access the memory of host A, it can be
+		 * initiated by PF1 in core0, or by VF0 of PF0 in core0.
+		 *
+		 * System Bus
+		 *    |     ----------PCIE module----------
+		 *    |     Bus
+		 *    |     Interface
+		 *    |     -----        ------------------
+		 *    |     |   |        | PCIE Core0     |
+		 *    |     |   |        |                |        -----------
+		 *    |     |   |        |   PF-0 -- VF-0 |        | Host A  |
+		 *    |     |   |--------|        |- VF-1 |--------| Root    |
+		 *    |     |   |        |   PF-1         |        | Complex |
+		 *    |     |   |        |   PF-2         |        -----------
+		 *    |     |   |        ------------------
+		 *    |     |   |
+		 *    |     |   |        ------------------
+		 *    |     |   |        | PCIE Core1     |
+		 *    |     |   |        |                |        -----------
+		 *    |     |   |        |   PF-0 -- VF-0 |        | Host B  |
+		 *    |-----|   |--------|   PF-1 -- VF-0 |--------| Root    |
+		 *    |     |   |        |        |- VF-1 |        | Complex |
+		 *    |     |   |        |   PF-2         |        -----------
+		 *    |     |   |        ------------------
+		 *    |     |   |
+		 *    |     |   |        ------------------
+		 *    |     |DMA|        |                |        ------
+		 *    |     |   |        |                |--------| EP |
+		 *    |     |   |--------| PCIE Core2     |        ------
+		 *    |     |   |        |                |        ------
+		 *    |     |   |        |                |--------| EP |
+		 *    |     |   |        |                |        ------
+		 *    |     -----        ------------------
+		 *
+		 * The following structure is used to describe the above access
+		 * port.
+		 */
+		struct {
+			uint64_t coreid : 3; /**< PCIE core id used */
+			uint64_t pfid : 6; /**< PF id used */
+			uint64_t vfen : 1; /**< VF enable bit */
+			uint64_t vfid : 8; /**< VF id used */
+			/** The pasid filed in TLP packet */
+			uint64_t pasid : 20;
+			/** The attributes filed in TLP packet */
+			uint64_t attr : 3;
+			/** The processing hint filed in TLP packet */
+			uint64_t ph : 2;
+			/** The steering tag filed in TLP packet */
+			uint64_t st : 16;
+		} pcie;
+	};
+	uint64_t reserved[2]; /**< Reserved for future fields */
+};
+
+/**
+ * A structure used to configure a virtual DMA channel.
+ */
+struct rte_dmadev_vchan_conf {
+	uint8_t direction;
+	/**< Set of supported transfer directions
+	 * @see RTE_DMA_MEM_TO_MEM
+	 * @see RTE_DMA_MEM_TO_DEV
+	 * @see RTE_DMA_DEV_TO_MEM
+	 * @see RTE_DMA_DEV_TO_DEV
+	 */
+	/** Number of descriptor for the virtual DMA channel */
+	uint16_t nb_desc;
+	/** 1) Used to describes the port parameter in the device-to-memory
+	 * transfer scenario.
+	 * 2) Used to describes the source port parameter in the
+	 * device-to-device transfer scenario.
+	 * @see struct rte_dmadev_port_parameters
+	 */
+	struct rte_dmadev_port_parameters src_port;
+	/** 1) Used to describes the port parameter in the memory-to-device-to
+	 * transfer scenario.
+	 * 2) Used to describes the destination port parameter in the
+	 * device-to-device transfer scenario.
+	 * @see struct rte_dmadev_port_parameters
+	 */
+	struct rte_dmadev_port_parameters dst_port;
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Allocate and set up a virtual DMA channel.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param conf
+ *   The virtual DMA channel configuration structure encapsulated into
+ *   rte_dmadev_vchan_conf object.
+ *
+ * @return
+ *   - >=0: Allocate success, it is the virtual DMA channel id. This value must
+ *          be less than the field 'max_vchans' of struct rte_dmadev_conf
+ *          which configured by rte_dmadev_configure().
+ *   - <0: Error code returned by the driver virtual channel setup function.
+ */
+__rte_experimental
+int
+rte_dmadev_vchan_setup(uint16_t dev_id,
+		       const struct rte_dmadev_vchan_conf *conf);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Release a virtual DMA channel.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel which return by vchan setup.
+ *
+ * @return
+ *   - =0: Successfully release the virtual DMA channel.
+ *   - <0: Error code returned by the driver virtual channel release function.
+ */
+__rte_experimental
+int
+rte_dmadev_vchan_release(uint16_t dev_id, uint16_t vchan);
+
+/**
+ * rte_dmadev_stats - running statistics.
+ */
+struct rte_dmadev_stats {
+	/** Count of operations which were successfully enqueued */
+	uint64_t enqueued_count;
+	/** Count of operations which were submitted to hardware */
+	uint64_t submitted_count;
+	/** Count of operations which failed to complete */
+	uint64_t completed_fail_count;
+	/** Count of operations which successfully complete */
+	uint64_t completed_count;
+};
+
+#define RTE_DMADEV_ALL_VCHAN	0xFFFFu
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve basic statistics of a or all virtual DMA channel(s).
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ *   If equal RTE_DMADEV_ALL_VCHAN means all channels.
+ * @param[out] stats
+ *   The basic statistics structure encapsulated into rte_dmadev_stats
+ *   object.
+ *
+ * @return
+ *   - =0: Successfully retrieve stats.
+ *   - <0: Failure to retrieve stats.
+ */
+__rte_experimental
+int
+rte_dmadev_stats_get(uint16_t dev_id, uint16_t vchan,
+		     struct rte_dmadev_stats *stats);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Reset basic statistics of a or all virtual DMA channel(s).
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ *   If equal RTE_DMADEV_ALL_VCHAN means all channels.
+ *
+ * @return
+ *   - =0: Successfully reset stats.
+ *   - <0: Failure to reset stats.
+ */
+__rte_experimental
+int
+rte_dmadev_stats_reset(uint16_t dev_id, uint16_t vchan);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Dump DMA device info.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param f
+ *   The file to write the output to.
+ *
+ * @return
+ *   0 on success. Non-zero otherwise.
+ */
+__rte_experimental
+int
+rte_dmadev_dump(uint16_t dev_id, FILE *f);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Trigger the dmadev self test.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   - 0: Selftest successful.
+ *   - -ENOTSUP if the device doesn't support selftest
+ *   - other values < 0 on failure.
+ */
+__rte_experimental
+int
+rte_dmadev_selftest(uint16_t dev_id);
+
+/**
+ * rte_dma_sge - can hold scatter DMA operation request entry
+ */
+struct rte_dma_sge {
+	rte_iova_t addr;
+	uint32_t length;
+};
+
+/**
+ * rte_dma_sg - can hold scatter DMA operation request
+ */
+struct rte_dma_sg {
+	struct rte_dma_sge *src;
+	struct rte_dma_sge *dst;
+	uint16_t nb_src; /**< The number of src entry */
+	uint16_t nb_dst; /**< The number of dst entry */
+};
+
+#include "rte_dmadev_core.h"
+
+/**
+ *  DMA flags to augment operation preparation.
+ *  Used as the 'flags' parameter of rte_dmadev_copy/fill.
+ */
+#define RTE_DMA_OP_FLAG_FENCE	(1ull << 0)
+/**< DMA fence flag
+ * It means the operation with this flag must be processed only after all
+ * previous operations are completed.
+ *
+ * @see rte_dmadev_copy()
+ * @see rte_dmadev_copy_sg()
+ * @see rte_dmadev_fill()
+ */
+#define RTE_DMA_OP_FLAG_SUBMIT	(1ull << 1)
+/**< DMA submit flag
+ * It means the operation with this flag must issue doorbell to hardware after
+ * enqueued jobs.
+ */
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a copy operation onto the virtual DMA channel.
+ *
+ * This queues up a copy operation to be performed by hardware, but does not
+ * trigger hardware to begin that operation.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param src
+ *   The address of the source buffer.
+ * @param dst
+ *   The address of the destination buffer.
+ * @param length
+ *   The length of the data to be copied.
+ * @param flags
+ *   An flags for this operation.
+ *   @see RTE_DMA_OP_FLAG_*
+ *
+ * @return
+ *   - 0..UINT16_MAX: index of enqueued copy job.
+ *   - <0: Error code returned by the driver copy function.
+ */
+__rte_experimental
+static inline int
+rte_dmadev_copy(uint16_t dev_id, uint16_t vchan, rte_iova_t src, rte_iova_t dst,
+		uint32_t length, uint64_t flags)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+#ifdef RTE_DMADEV_DEBUG
+	if (!rte_dmadev_is_valid_dev(dev_id) ||
+	    vchan >= dev->data->dev_conf.max_vchans)
+		return -EINVAL;
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->copy, -ENOTSUP);
+#endif
+	return (*dev->copy)(dev, vchan, src, dst, length, flags);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a scatter list copy operation onto the virtual DMA channel.
+ *
+ * This queues up a scatter list copy operation to be performed by hardware,
+ * but does not trigger hardware to begin that operation.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param sg
+ *   The pointer of scatterlist.
+ * @param flags
+ *   An flags for this operation.
+ *   @see RTE_DMA_OP_FLAG_*
+ *
+ * @return
+ *   - 0..UINT16_MAX: index of enqueued copy scatterlist job.
+ *   - <0: Error code returned by the driver copy scatterlist function.
+ */
+__rte_experimental
+static inline int
+rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vchan, const struct rte_dma_sg *sg,
+		   uint64_t flags)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+#ifdef RTE_DMADEV_DEBUG
+	if (!rte_dmadev_is_valid_dev(dev_id) ||
+	    vchan >= dev->data->dev_conf.max_vchans ||
+	    sg == NULL)
+		return -EINVAL;
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->copy_sg, -ENOTSUP);
+#endif
+	return (*dev->copy_sg)(dev, vchan, sg, flags);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a fill operation onto the virtual DMA channel.
+ *
+ * This queues up a fill operation to be performed by hardware, but does not
+ * trigger hardware to begin that operation.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param pattern
+ *   The pattern to populate the destination buffer with.
+ * @param dst
+ *   The address of the destination buffer.
+ * @param length
+ *   The length of the destination buffer.
+ * @param flags
+ *   An flags for this operation.
+ *   @see RTE_DMA_OP_FLAG_*
+ *
+ * @return
+ *   - 0..UINT16_MAX: index of enqueued fill job.
+ *   - <0: Error code returned by the driver fill function.
+ */
+__rte_experimental
+static inline int
+rte_dmadev_fill(uint16_t dev_id, uint16_t vchan, uint64_t pattern,
+		rte_iova_t dst, uint32_t length, uint64_t flags)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+#ifdef RTE_DMADEV_DEBUG
+	if (!rte_dmadev_is_valid_dev(dev_id) ||
+	    vchan >= dev->data->dev_conf.max_vchans)
+		return -EINVAL;
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->fill, -ENOTSUP);
+#endif
+	return (*dev->fill)(dev, vchan, pattern, dst, length, flags);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Trigger hardware to begin performing enqueued operations.
+ *
+ * This API is used to write the "doorbell" to the hardware to trigger it
+ * to begin the operations previously enqueued by rte_dmadev_copy/fill()
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ *
+ * @return
+ *   - =0: Successfully trigger hardware.
+ *   - <0: Failure to trigger hardware.
+ */
+__rte_experimental
+static inline int
+rte_dmadev_submit(uint16_t dev_id, uint16_t vchan)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+#ifdef RTE_DMADEV_DEBUG
+	if (!rte_dmadev_is_valid_dev(dev_id) ||
+	    vchan >= dev->data->dev_conf.max_vchans)
+		return -EINVAL;
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->submit, -ENOTSUP);
+#endif
+	return (*dev->submit)(dev, vchan);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Returns the number of operations that have been successfully completed.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param nb_cpls
+ *   The maximum number of completed operations that can be processed.
+ * @param[out] last_idx
+ *   The last completed operation's index.
+ *   If not required, NULL can be passed in.
+ * @param[out] has_error
+ *   Indicates if there are transfer error.
+ *   If not required, NULL can be passed in.
+ *
+ * @return
+ *   The number of operations that successfully completed.
+ */
+__rte_experimental
+static inline uint16_t
+rte_dmadev_completed(uint16_t dev_id, uint16_t vchan, const uint16_t nb_cpls,
+		     uint16_t *last_idx, bool *has_error)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	uint16_t idx;
+	bool err;
+
+#ifdef RTE_DMADEV_DEBUG
+	if (!rte_dmadev_is_valid_dev(dev_id) ||
+	    vchan >= dev->data->dev_conf.max_vchans ||
+	    nb_cpls == 0)
+		return -EINVAL;
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->completed, -ENOTSUP);
+#endif
+
+	/* Ensure the pointer values are non-null to simplify drivers.
+	 * In most cases these should be compile time evaluated, since this is
+	 * an inline function.
+	 * - If NULL is explicitly passed as parameter, then compiler knows the
+	 *   value is NULL
+	 * - If address of local variable is passed as parameter, then compiler
+	 *   can know it's non-NULL.
+	 */
+	if (last_idx == NULL)
+		last_idx = &idx;
+	if (has_error == NULL)
+		has_error = &err;
+
+	*has_error = false;
+	return (*dev->completed)(dev, vchan, nb_cpls, last_idx, has_error);
+}
+
+/**
+ * DMA transfer status code defines
+ */
+enum rte_dma_status_code {
+	/** The operation completed successfully */
+	RTE_DMA_STATUS_SUCCESSFUL = 0,
+	/** The operation failed to complete due active drop
+	 * This is mainly used when processing dev_stop, allow outstanding
+	 * requests to be completed as much as possible.
+	 */
+	RTE_DMA_STATUS_ACTIVE_DROP,
+	/** The operation failed to complete due invalid source address */
+	RTE_DMA_STATUS_INVALID_SRC_ADDR,
+	/** The operation failed to complete due invalid destination address */
+	RTE_DMA_STATUS_INVALID_DST_ADDR,
+	/** The operation failed to complete due invalid length */
+	RTE_DMA_STATUS_INVALID_LENGTH,
+	/** The operation failed to complete due invalid opcode
+	 * The DMA descriptor could have multiple format, which are
+	 * distinguished by the opcode field.
+	 */
+	RTE_DMA_STATUS_INVALID_OPCODE,
+	/** The operation failed to complete due bus err */
+	RTE_DMA_STATUS_BUS_ERROR,
+	/** The operation failed to complete due data poison */
+	RTE_DMA_STATUS_DATA_POISION,
+	/** The operation failed to complete due descriptor read error */
+	RTE_DMA_STATUS_DESCRIPTOR_READ_ERROR,
+	/** The operation failed to complete due device link error
+	 * Used to indicates that the link error in the mem-to-dev/dev-to-mem/
+	 * dev-to-dev transfer scenario.
+	 */
+	RTE_DMA_STATUS_DEV_LINK_ERROR,
+	/** The operation failed to complete due unknown reason */
+	RTE_DMA_STATUS_UNKNOWN,
+	/** Driver specific status code offset
+	 * Start status code for the driver to define its own error code.
+	 */
+	RTE_DMA_STATUS_DRV_SPECIFIC_OFFSET = 0x10000,
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Returns the number of operations that failed to complete.
+ * NOTE: This API was used when rte_dmadev_completed has_error was set.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param nb_status
+ *   Indicates the size of status array.
+ * @param[out] status
+ *   The error code of operations that failed to complete.
+ *   Some standard error code are described in 'enum rte_dma_status_code'
+ *   @see rte_dma_status_code
+ * @param[out] last_idx
+ *   The last failed completed operation's index.
+ *
+ * @return
+ *   The number of operations that failed to complete.
+ */
+__rte_experimental
+static inline uint16_t
+rte_dmadev_completed_fails(uint16_t dev_id, uint16_t vchan,
+			   const uint16_t nb_status, uint32_t *status,
+			   uint16_t *last_idx)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+#ifdef RTE_DMADEV_DEBUG
+	if (!rte_dmadev_is_valid_dev(dev_id) ||
+	    vchan >= dev->data->dev_conf.max_vchans ||
+	    nb_status == 0 ||
+	    status == NULL ||
+	    last_idx == NULL)
+		return -EINVAL;
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->completed_fails, -ENOTSUP);
+#endif
+	return (*dev->completed_fails)(dev, vchan, nb_status, status, last_idx);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_DMADEV_H_ */
diff --git a/lib/dmadev/rte_dmadev_core.h b/lib/dmadev/rte_dmadev_core.h
new file mode 100644
index 0000000..b0b6494
--- /dev/null
+++ b/lib/dmadev/rte_dmadev_core.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 HiSilicon Limited.
+ * Copyright(c) 2021 Intel Corporation.
+ */
+
+#ifndef _RTE_DMADEV_CORE_H_
+#define _RTE_DMADEV_CORE_H_
+
+/**
+ * @file
+ *
+ * RTE DMA Device internal header.
+ *
+ * This header contains internal data types, that are used by the DMA devices
+ * in order to expose their ops to the class.
+ *
+ * Applications should not use these API directly.
+ *
+ */
+
+struct rte_dmadev;
+
+/** @internal Used to get device information of a device. */
+typedef int (*dmadev_info_get_t)(const struct rte_dmadev *dev,
+				 struct rte_dmadev_info *dev_info,
+				 uint32_t info_sz);
+
+/** @internal Used to configure a device. */
+typedef int (*dmadev_configure_t)(struct rte_dmadev *dev,
+				  const struct rte_dmadev_conf *dev_conf);
+
+/** @internal Used to start a configured device. */
+typedef int (*dmadev_start_t)(struct rte_dmadev *dev);
+
+/** @internal Used to stop a configured device. */
+typedef int (*dmadev_stop_t)(struct rte_dmadev *dev);
+
+/** @internal Used to close a configured device. */
+typedef int (*dmadev_close_t)(struct rte_dmadev *dev);
+
+/** @internal Used to allocate and set up a virtual DMA channel. */
+typedef int (*dmadev_vchan_setup_t)(struct rte_dmadev *dev,
+				    const struct rte_dmadev_vchan_conf *conf);
+
+/** @internal Used to release a virtual DMA channel. */
+typedef int (*dmadev_vchan_release_t)(struct rte_dmadev *dev, uint16_t vchan);
+
+/** @internal Used to retrieve basic statistics. */
+typedef int (*dmadev_stats_get_t)(const struct rte_dmadev *dev, uint16_t vchan,
+				  struct rte_dmadev_stats *stats,
+				  uint32_t stats_sz);
+
+/** @internal Used to reset basic statistics. */
+typedef int (*dmadev_stats_reset_t)(struct rte_dmadev *dev, uint16_t vchan);
+
+/** @internal Used to dump internal information. */
+typedef int (*dmadev_dump_t)(const struct rte_dmadev *dev, FILE *f);
+
+/** @internal Used to start dmadev selftest. */
+typedef int (*dmadev_selftest_t)(uint16_t dev_id);
+
+/** @internal Used to enqueue a copy operation. */
+typedef int (*dmadev_copy_t)(struct rte_dmadev *dev, uint16_t vchan,
+			     rte_iova_t src, rte_iova_t dst,
+			     uint32_t length, uint64_t flags);
+
+/** @internal Used to enqueue a scatter list copy operation. */
+typedef int (*dmadev_copy_sg_t)(struct rte_dmadev *dev, uint16_t vchan,
+				const struct rte_dma_sg *sg, uint64_t flags);
+
+/** @internal Used to enqueue a fill operation. */
+typedef int (*dmadev_fill_t)(struct rte_dmadev *dev, uint16_t vchan,
+			     uint64_t pattern, rte_iova_t dst,
+			     uint32_t length, uint64_t flags);
+
+/** @internal Used to trigger hardware to begin working. */
+typedef int (*dmadev_submit_t)(struct rte_dmadev *dev, uint16_t vchan);
+
+/** @internal Used to return number of successful completed operations. */
+typedef uint16_t (*dmadev_completed_t)(struct rte_dmadev *dev, uint16_t vchan,
+				       const uint16_t nb_cpls,
+				       uint16_t *last_idx, bool *has_error);
+
+/** @internal Used to return number of failed completed operations. */
+typedef uint16_t (*dmadev_completed_fails_t)(struct rte_dmadev *dev,
+			uint16_t vchan, const uint16_t nb_status,
+			uint32_t *status, uint16_t *last_idx);
+
+/**
+ * Possible states of a DMA device.
+ */
+enum rte_dmadev_state {
+	/** Device is unused before being probed. */
+	RTE_DMADEV_UNUSED = 0,
+	/** Device is attached when allocated in probing. */
+	RTE_DMADEV_ATTACHED,
+};
+
+/**
+ * DMA device operations function pointer table
+ */
+struct rte_dmadev_ops {
+	dmadev_info_get_t dev_info_get;
+	dmadev_configure_t dev_configure;
+	dmadev_start_t dev_start;
+	dmadev_stop_t dev_stop;
+	dmadev_close_t dev_close;
+	dmadev_vchan_setup_t vchan_setup;
+	dmadev_vchan_release_t vchan_release;
+	dmadev_stats_get_t stats_get;
+	dmadev_stats_reset_t stats_reset;
+	dmadev_dump_t dev_dump;
+	dmadev_selftest_t dev_selftest;
+};
+
+/**
+ * @internal
+ * The data part, with no function pointers, associated with each DMA device.
+ *
+ * This structure is safe to place in shared memory to be common among different
+ * processes in a multi-process configuration.
+ */
+struct rte_dmadev_data {
+	void *dev_private; /**< PMD-specific private data. */
+	uint16_t dev_id; /**< Device [external] identifier. */
+	char dev_name[RTE_DMADEV_NAME_MAX_LEN]; /**< Unique identifier name */
+	struct rte_dmadev_conf dev_conf; /**< DMA device configuration. */
+	uint8_t dev_started : 1; /**< Device state: STARTED(1)/STOPPED(0). */
+	uint64_t reserved[2]; /**< Reserved for future fields */
+} __rte_cache_aligned;
+
+/**
+ * @internal
+ * The generic data structure associated with each DMA device.
+ *
+ * The dataplane APIs are located at the beginning of the structure, along
+ * with the pointer to where all the data elements for the particular device
+ * are stored in shared memory. This split scheme allows the function pointer
+ * and driver data to be per-process, while the actual configuration data for
+ * the device is shared.
+ */
+struct rte_dmadev {
+	dmadev_copy_t copy;
+	dmadev_copy_sg_t copy_sg;
+	dmadev_fill_t fill;
+	dmadev_submit_t submit;
+	dmadev_completed_t completed;
+	dmadev_completed_fails_t completed_fails;
+	void *reserved_ptr; /**< Reserved for future IO function */
+	struct rte_dmadev_data *data; /**< Pointer to device data. */
+
+	const struct rte_dmadev_ops *dev_ops; /**< Functions exported by PMD. */
+	/** Device info which supplied during device initialization. */
+	struct rte_device *device;
+	enum rte_dmadev_state state; /**< Flag indicating the device state */
+	uint64_t reserved[2]; /**< Reserved for future fields */
+} __rte_cache_aligned;
+
+extern struct rte_dmadev rte_dmadevices[];
+
+#endif /* _RTE_DMADEV_CORE_H_ */
diff --git a/lib/dmadev/rte_dmadev_pmd.h b/lib/dmadev/rte_dmadev_pmd.h
new file mode 100644
index 0000000..45141f9
--- /dev/null
+++ b/lib/dmadev/rte_dmadev_pmd.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 HiSilicon Limited.
+ */
+
+#ifndef _RTE_DMADEV_PMD_H_
+#define _RTE_DMADEV_PMD_H_
+
+/**
+ * @file
+ *
+ * RTE DMA Device PMD APIs
+ *
+ * Driver facing APIs for a DMA device. These are not to be called directly by
+ * any application.
+ */
+
+#include "rte_dmadev.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @internal
+ * Allocates a new dmadev slot for an DMA device and returns the pointer
+ * to that slot for the driver to use.
+ *
+ * @param name
+ *   DMA device name.
+ *
+ * @return
+ *   A pointer to the DMA device slot case of success,
+ *   NULL otherwise.
+ */
+__rte_internal
+struct rte_dmadev *
+rte_dmadev_pmd_allocate(const char *name);
+
+/**
+ * @internal
+ * Release the specified dmadev.
+ *
+ * @param dev
+ *   Device to be released.
+ *
+ * @return
+ *   - 0 on success, negative on error
+ */
+__rte_internal
+int
+rte_dmadev_pmd_release(struct rte_dmadev *dev);
+
+/**
+ * @internal
+ * Return the DMA device based on the device name.
+ *
+ * @param name
+ *   DMA device name.
+ *
+ * @return
+ *   A pointer to the DMA device slot case of success,
+ *   NULL otherwise.
+ */
+__rte_internal
+struct rte_dmadev *
+rte_dmadev_get_device_by_name(const char *name);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_DMADEV_PMD_H_ */
diff --git a/lib/dmadev/version.map b/lib/dmadev/version.map
new file mode 100644
index 0000000..2af78e4
--- /dev/null
+++ b/lib/dmadev/version.map
@@ -0,0 +1,37 @@
+EXPERIMENTAL {
+	global:
+
+	rte_dmadev_close;
+	rte_dmadev_completed;
+	rte_dmadev_completed_fails;
+	rte_dmadev_configure;
+	rte_dmadev_copy;
+	rte_dmadev_copy_sg;
+	rte_dmadev_count;
+	rte_dmadev_dump;
+	rte_dmadev_fill;
+	rte_dmadev_info_get;
+	rte_dmadev_is_valid_dev;
+	rte_dmadev_selftest;
+	rte_dmadev_start;
+	rte_dmadev_stats_get;
+	rte_dmadev_stats_reset;
+	rte_dmadev_stop;
+	rte_dmadev_submit;
+	rte_dmadev_vchan_release;
+	rte_dmadev_vchan_setup;
+
+	local: *;
+};
+
+INTERNAL {
+        global:
+
+	rte_dmadevices;
+	rte_dmadev_get_device_by_name;
+	rte_dmadev_pmd_allocate;
+	rte_dmadev_pmd_release;
+
+	local: *;
+};
+
diff --git a/lib/meson.build b/lib/meson.build
index 1673ca4..68d239f 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -60,6 +60,7 @@ libraries = [
         'bpf',
         'graph',
         'node',
+        'dmadev',
 ]
 
 if is_windows
-- 
2.8.1


  parent reply	other threads:[~2021-07-13 12:31 UTC|newest]

Thread overview: 339+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-02 13:18 [dpdk-dev] [PATCH] " Chengwen Feng
2021-07-02 13:59 ` Bruce Richardson
2021-07-04  9:30 ` Jerin Jacob
2021-07-05 10:52   ` Bruce Richardson
2021-07-05 11:12     ` Morten Brørup
2021-07-05 13:44       ` Bruce Richardson
2021-07-05 15:55     ` Jerin Jacob
2021-07-05 17:16       ` Bruce Richardson
2021-07-07  8:08         ` Jerin Jacob
2021-07-07  8:35           ` Bruce Richardson
2021-07-07 10:34             ` Jerin Jacob
2021-07-07 11:01               ` Bruce Richardson
2021-07-08  3:11                 ` fengchengwen
2021-07-08 18:35                   ` Jerin Jacob
2021-07-09  9:14                     ` Bruce Richardson
2021-07-11  7:14                       ` Jerin Jacob
2021-07-12  7:01                         ` Morten Brørup
2021-07-12  7:59                           ` Jerin Jacob
2021-07-06  8:20     ` fengchengwen
2021-07-06  9:27       ` Bruce Richardson
2021-07-06  3:01   ` fengchengwen
2021-07-06 10:01     ` Bruce Richardson
2021-07-04 14:57 ` Andrew Rybchenko
2021-07-06  3:56   ` fengchengwen
2021-07-06 10:02     ` Bruce Richardson
2021-07-04 15:21 ` Matan Azrad
2021-07-06  6:25   ` fengchengwen
2021-07-06  6:50     ` Matan Azrad
2021-07-06  9:08       ` fengchengwen
2021-07-06  9:17         ` Matan Azrad
2021-07-06 20:28 ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 1/9] dmadev: add missing exports Bruce Richardson
2021-07-07  8:26     ` David Marchand
2021-07-07  8:36       ` Bruce Richardson
2021-07-07  8:57         ` David Marchand
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 2/9] dmadev: change virtual addresses to IOVA Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 3/9] dmadev: add dump function Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 4/9] dmadev: remove xstats functions Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 5/9] dmadev: drop cookie typedef Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 6/9] dmadev: allow NULL parameters to completed ops call Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 7/9] dmadev: stats structure updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 8/9] drivers: add dma driver category Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 9/9] app/test: add basic dmadev unit test Bruce Richardson
2021-07-07  3:16   ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates fengchengwen
2021-07-07  8:11     ` Bruce Richardson
2021-07-07  8:14     ` Bruce Richardson
2021-07-07 10:42     ` Jerin Jacob
2021-07-11  9:25 ` [dpdk-dev] [PATCH v2] dmadev: introduce DMA device library Chengwen Feng
2021-07-11  9:42   ` fengchengwen
2021-07-11 13:34     ` Jerin Jacob
2021-07-12  7:40       ` Morten Brørup
2021-07-11 14:25   ` Jerin Jacob
2021-07-12  7:15   ` Morten Brørup
2021-07-12  9:59   ` Jerin Jacob
2021-07-12 13:32     ` Bruce Richardson
2021-07-12 16:34       ` Jerin Jacob
2021-07-12 17:00         ` Bruce Richardson
2021-07-13  8:59           ` Jerin Jacob
2021-07-12 12:05   ` Bruce Richardson
2021-07-12 15:50   ` Bruce Richardson
2021-07-13  9:07     ` Jerin Jacob
2021-07-13 14:19   ` Ananyev, Konstantin
2021-07-13 14:28     ` Bruce Richardson
2021-07-13 12:27 ` Chengwen Feng [this message]
2021-07-13 13:06   ` [dpdk-dev] [PATCH v3] " fengchengwen
2021-07-13 13:37     ` Bruce Richardson
2021-07-15  6:44       ` Jerin Jacob
2021-07-15  8:25         ` Bruce Richardson
2021-07-15  9:49           ` Jerin Jacob
2021-07-15 10:00             ` Bruce Richardson
2021-07-13 16:02   ` Bruce Richardson
2021-07-14 12:22   ` Nipun Gupta
2021-07-15  8:29     ` fengchengwen
2021-07-15 11:16       ` Nipun Gupta
2021-07-15 12:11         ` Bruce Richardson
2021-07-15 12:31           ` Jerin Jacob
2021-07-15 12:34             ` Nipun Gupta
2021-07-14 16:05   ` Bruce Richardson
2021-07-15  7:10   ` Jerin Jacob
2021-07-15  9:03     ` Bruce Richardson
2021-07-15  9:30       ` Jerin Jacob
2021-07-15 10:03         ` Bruce Richardson
2021-07-15 10:05           ` Bruce Richardson
2021-07-15 15:41 ` [dpdk-dev] [PATCH v4] " Chengwen Feng
2021-07-15 16:04   ` fengchengwen
2021-07-15 16:33     ` Bruce Richardson
2021-07-16  3:04       ` fengchengwen
2021-07-16  9:50         ` Bruce Richardson
2021-07-16 12:34           ` Jerin Jacob
2021-07-16 12:40         ` Jerin Jacob
2021-07-16 12:48           ` Bruce Richardson
2021-07-16 12:54     ` Jerin Jacob
2021-07-16  2:45 ` [dpdk-dev] [PATCH v5] " Chengwen Feng
2021-07-16 13:20   ` Jerin Jacob
2021-07-16 14:41   ` Bruce Richardson
2021-07-19  3:29 ` [dpdk-dev] [PATCH v6] " Chengwen Feng
2021-07-19  6:21   ` Jerin Jacob
2021-07-19 13:20     ` fengchengwen
2021-07-19 13:36       ` Jerin Jacob
2021-07-19 13:05 ` [dpdk-dev] [PATCH v7] " Chengwen Feng
2021-07-20  1:14 ` [dpdk-dev] [PATCH v8] " Chengwen Feng
2021-07-20  5:03   ` Jerin Jacob
2021-07-20  6:53     ` fengchengwen
2021-07-20  9:43       ` Jerin Jacob
2021-07-20 10:13       ` Bruce Richardson
2021-07-20 11:12 ` [dpdk-dev] [PATCH v9] " Chengwen Feng
2021-07-20 12:05   ` Bruce Richardson
2021-07-20 12:46 ` [dpdk-dev] [PATCH v10] " Chengwen Feng
2021-07-26  6:53   ` fengchengwen
2021-07-26  8:31     ` Bruce Richardson
2021-07-27  3:57       ` fengchengwen
2021-07-26 11:03     ` Morten Brørup
2021-07-26 11:21       ` Jerin Jacob
2021-07-27  3:39 ` [dpdk-dev] [PATCH v11 0/2] support dmadev Chengwen Feng
2021-07-27  3:39   ` [dpdk-dev] [PATCH v11 1/2] dmadev: introduce DMA device library Chengwen Feng
2021-07-28 11:13     ` Bruce Richardson
2021-07-29  1:26       ` fengchengwen
2021-07-29  9:15         ` Bruce Richardson
2021-07-29 13:33           ` fengchengwen
2021-07-29 10:44         ` Jerin Jacob
2021-07-29 13:30           ` fengchengwen
2021-07-27  3:40   ` [dpdk-dev] [PATCH v11 2/2] doc: add dmadev library guide Chengwen Feng
2021-07-29 11:02     ` Jerin Jacob
2021-07-29 13:13       ` fengchengwen
2021-07-29 13:28         ` fengchengwen
2021-07-29 13:06 ` [dpdk-dev] [PATCH v12 0/6] support dmadev Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 5/6] doc: add DMA device library guide Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:29 ` [dpdk-dev] [PATCH v13 0/6] support dmadev Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-05 12:56     ` Walsh, Conor
2021-08-05 13:12       ` fengchengwen
2021-08-05 13:44         ` Conor Walsh
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-03 14:55     ` Jerin Jacob
2021-08-05 13:15       ` fengchengwen
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:46   ` [dpdk-dev] [PATCH v13 0/6] support dmadev fengchengwen
2021-08-10 11:54 ` [dpdk-dev] [PATCH v14 " Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-10 15:27     ` Walsh, Conor
2021-08-11  0:47       ` fengchengwen
2021-08-13  9:20       ` fengchengwen
2021-08-13 10:12         ` Walsh, Conor
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-13  9:09 ` [dpdk-dev] [PATCH v15 0/6] support dmadev Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-19 14:52     ` Bruce Richardson
2021-08-23  3:43       ` fengchengwen
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-23  3:31 ` [dpdk-dev] [PATCH v16 0/9] support dmadev Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 1/9] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 2/9] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 3/9] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 4/9] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 5/9] doc: add DMA device library guide Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 6/9] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-26 18:39     ` Bruce Richardson
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 7/9] dma/skeleton: add test cases Chengwen Feng
2021-08-23 14:03     ` Bruce Richardson
2021-08-26  9:30       ` fengchengwen
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 8/9] test: enable dmadev skeleton test Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 9/9] maintainers: add for dmadev Chengwen Feng
2021-08-28  7:29 ` [dpdk-dev] [PATCH v17 0/8] support dmadev Chengwen Feng
2021-08-28  7:29   ` [dpdk-dev] [PATCH v17 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 5/8] doc: add DMA device library guide Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 7/8] app/test: add dmadev API test Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 8/8] maintainers: add for dmadev Chengwen Feng
2021-08-28  8:25     ` fengchengwen
2021-08-30  8:19       ` Bruce Richardson
2021-09-02 10:54 ` [dpdk-dev] [PATCH v18 0/8] support dmadev Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 5/8] doc: add DMA device library guide Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 7/8] app/test: add dmadev API test Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 8/8] maintainers: add for dmadev Chengwen Feng
2021-09-02 11:51     ` Bruce Richardson
2021-09-02 13:39       ` fengchengwen
2021-09-03 12:59         ` Maxime Coquelin
2021-09-04  7:02           ` fengchengwen
2021-09-06  1:46             ` Li, Xiaoyun
2021-09-06  8:00               ` fengchengwen
2021-09-06  2:03           ` Xia, Chenbo
2021-09-06  8:01             ` fengchengwen
2021-09-02 13:13 ` [dpdk-dev] [PATCH v19 0/7] support dmadev Chengwen Feng
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-03 11:42     ` Gagandeep Singh
2021-09-04  1:31       ` fengchengwen
2021-09-06  6:48         ` Gagandeep Singh
2021-09-06  7:52           ` fengchengwen
2021-09-06  8:06             ` Jerin Jacob
2021-09-06  8:08             ` Bruce Richardson
2021-09-07 12:55             ` fengchengwen
2021-09-03 13:03     ` Bruce Richardson
2021-09-04  3:05       ` fengchengwen
2021-09-04 10:10       ` Morten Brørup
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:30       ` Bruce Richardson
2021-09-03 15:35     ` Conor Walsh
2021-09-04  8:52       ` fengchengwen
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-03 15:14     ` Kevin Laatz
2021-09-04  7:17       ` fengchengwen
2021-09-03 15:36     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-02 14:11     ` Walsh, Conor
2021-09-03  0:39       ` fengchengwen
2021-09-03 15:38         ` Walsh, Conor
2021-09-04  7:22           ` fengchengwen
2021-09-03 15:14     ` Kevin Laatz
2021-09-04 10:10 ` [dpdk-dev] [PATCH v20 0/7] support dmadev Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-06 13:35     ` Bruce Richardson
2021-09-07 13:05       ` fengchengwen
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-04 10:17     ` Jerin Jacob
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-06 13:37   ` [dpdk-dev] [PATCH v20 0/7] support dmadev Bruce Richardson
2021-09-07 12:56 ` [dpdk-dev] [PATCH v21 " Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-09 10:33     ` Thomas Monjalon
2021-09-09 11:18       ` Bruce Richardson
2021-09-09 11:29         ` Thomas Monjalon
2021-09-09 12:45           ` Bruce Richardson
2021-09-09 13:54             ` fengchengwen
2021-09-09 14:26               ` Thomas Monjalon
2021-09-09 14:31                 ` Bruce Richardson
2021-09-09 14:28               ` Bruce Richardson
2021-09-09 15:12                 ` Morten Brørup
2021-09-09 13:33       ` fengchengwen
2021-09-09 14:19         ` Thomas Monjalon
2021-09-16  3:57       ` fengchengwen
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-08  9:54     ` Walsh, Conor
2021-09-09 13:25       ` fengchengwen
2021-09-15 13:51     ` Kevin Laatz
2021-09-15 14:34       ` Bruce Richardson
2021-09-15 14:47         ` Kevin Laatz
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-16  3:41 ` [dpdk-dev] [PATCH v22 0/5] support dmadev Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 1/5] dmadev: introduce DMA device library Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 2/5] dmadev: add control plane function support Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 3/5] dmadev: add data " Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 4/5] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 5/5] app/test: add dmadev API test Chengwen Feng
2021-09-24 10:53 ` [dpdk-dev] [PATCH v23 0/6] support dmadev Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-04 21:12     ` Radha Mohan
2021-10-05  8:24       ` Kevin Laatz
2021-10-05 16:39         ` Radha Mohan
2021-10-08  1:52       ` fengchengwen
2021-10-06 10:26     ` Thomas Monjalon
2021-10-08  7:13       ` fengchengwen
2021-10-08 10:09         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 2/6] dmadev: add control plane function support Chengwen Feng
2021-10-05 10:16     ` Matan Azrad
2021-10-08  3:28       ` fengchengwen
2021-10-06 10:46     ` Thomas Monjalon
2021-10-08  7:55       ` fengchengwen
2021-10-08 10:18         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 3/6] dmadev: add data " Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 4/6] dmadev: add multi-process support Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-09  9:33 ` [dpdk-dev] [PATCH v24 0/6] support dmadev Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 3/6] dmadev: add data " Chengwen Feng
2021-10-09 10:03     ` fengchengwen
2021-10-11 10:40     ` Bruce Richardson
2021-10-11 12:31       ` fengchengwen
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-11  7:33 ` [dpdk-dev] [PATCH v25 0/6] support dmadev Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-12 19:09     ` Thomas Monjalon
2021-10-13  0:21       ` fengchengwen
2021-10-13  7:41         ` Thomas Monjalon
2021-10-15  8:29           ` Thomas Monjalon
2021-10-15  9:59             ` fengchengwen
2021-10-15 13:46               ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-11 15:44     ` Bruce Richardson
2021-10-12  3:57       ` fengchengwen
2021-10-12 18:57     ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 3/6] dmadev: add data " Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-13 12:24 ` [dpdk-dev] [PATCH v26 0/6] support dmadev Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 3/6] dmadev: add data " Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-13 12:25   ` [dpdk-dev] [PATCH v26 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-17 19:17   ` [dpdk-dev] [PATCH v26 0/6] support dmadev Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1626179263-14645-1-git-send-email-fengchengwen@huawei.com \
    --to=fengchengwen@huawei.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=honnappa.nagarahalli@arm.com \
    --cc=jerinj@marvell.com \
    --cc=jerinjacobk@gmail.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=mb@smartsharesystems.com \
    --cc=nipun.gupta@nxp.com \
    --cc=pkapoor@marvell.com \
    --cc=sburla@marvell.com \
    --cc=thomas@monjalon.net \
    --subject='Re: [dpdk-dev] [PATCH v3] dmadev: introduce DMA device library' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.