All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rakesh Pillai <pillair@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, sibis@codeaurora.org,
	sboyd@kernel.org, mpubbise@codeaurora.org,
	Rakesh Pillai <pillair@codeaurora.org>
Subject: [PATCH v2 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
Date: Tue, 10 Aug 2021 23:31:23 +0530	[thread overview]
Message-ID: <1628618483-664-4-git-send-email-pillair@codeaurora.org> (raw)
In-Reply-To: <1628618483-664-1-git-send-email-pillair@codeaurora.org>

Add support for PIL loading of WPSS processor for SC7280
WPSS boot will be requested by the wifi driver and hence
disable auto-boot for WPSS. Also add a separate shutdown
sequence handler for WPSS.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_adsp.c | 70 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 8b0d8bb..178ee7e 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -32,6 +32,7 @@
 
 /* time out value */
 #define ACK_TIMEOUT			1000
+#define ACK_TIMEOUT_US			1000000
 #define BOOT_FSM_TIMEOUT		10000
 /* mask values */
 #define EVB_MASK			GENMASK(27, 4)
@@ -58,6 +59,8 @@ struct adsp_pil_data {
 	const char *ssr_name;
 	const char *sysmon_name;
 	int ssctl_id;
+	bool is_wpss;
+	bool auto_boot;
 
 	const char **clk_ids;
 	int num_clks;
@@ -96,8 +99,46 @@ struct qcom_adsp {
 	struct qcom_rproc_glink glink_subdev;
 	struct qcom_rproc_ssr ssr_subdev;
 	struct qcom_sysmon *sysmon;
+
+	int (*shutdown)(struct qcom_adsp *adsp);
 };
 
+static int qcom_wpss_shutdown(struct qcom_adsp *adsp)
+{
+	unsigned int val;
+
+	regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 1);
+
+	/* Wait for halt ACK from QDSP6 */
+	regmap_read_poll_timeout(adsp->halt_map,
+				 adsp->halt_lpass + LPASS_HALTACK_REG, val,
+				 val, 1000, ACK_TIMEOUT_US);
+
+	/* Assert the WPSS PDC Reset */
+	reset_control_assert(adsp->pdc_sync_reset);
+	/* Place the WPSS processor into reset */
+	reset_control_assert(adsp->restart);
+	/* wait after asserting subsystem restart from AOSS */
+	usleep_range(200, 205);
+	/* Remove the WPSS reset */
+	reset_control_deassert(adsp->restart);
+	/* De-assert the WPSS PDC Reset */
+	reset_control_deassert(adsp->pdc_sync_reset);
+
+	usleep_range(100, 105);
+
+	clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks);
+
+	regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 0);
+
+	/* Wait for halt ACK from QDSP6 */
+	regmap_read_poll_timeout(adsp->halt_map,
+				 adsp->halt_lpass + LPASS_HALTACK_REG, val,
+				 !val, 1000, ACK_TIMEOUT_US);
+
+	return 0;
+}
+
 static int qcom_adsp_shutdown(struct qcom_adsp *adsp)
 {
 	unsigned long timeout;
@@ -270,7 +311,7 @@ static int adsp_stop(struct rproc *rproc)
 	if (ret == -ETIMEDOUT)
 		dev_err(adsp->dev, "timed out on wait\n");
 
-	ret = qcom_adsp_shutdown(adsp);
+	ret = adsp->shutdown(adsp);
 	if (ret)
 		dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
 
@@ -439,6 +480,8 @@ static int adsp_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "unable to allocate remoteproc\n");
 		return -ENOMEM;
 	}
+
+	rproc->auto_boot = desc->auto_boot;
 	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
 
 	adsp = (struct qcom_adsp *)rproc->priv;
@@ -447,6 +490,11 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->info_name = desc->sysmon_name;
 	platform_set_drvdata(pdev, adsp);
 
+	if (desc->is_wpss)
+		adsp->shutdown = qcom_wpss_shutdown;
+	else
+		adsp->shutdown = qcom_adsp_shutdown;
+
 	ret = adsp_alloc_memory_region(adsp);
 	if (ret)
 		goto free_rproc;
@@ -515,6 +563,8 @@ static const struct adsp_pil_data adsp_resource_init = {
 	.ssr_name = "lpass",
 	.sysmon_name = "adsp",
 	.ssctl_id = 0x14,
+	.is_wpss = false,
+	.auto_boot = true,
 	.clk_ids = (const char*[]) {
 		"sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr",
 		"qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core", NULL
@@ -528,6 +578,8 @@ static const struct adsp_pil_data cdsp_resource_init = {
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
 	.ssctl_id = 0x17,
+	.is_wpss = false,
+	.auto_boot = true,
 	.clk_ids = (const char*[]) {
 		"sway", "tbu", "bimc", "ahb_aon", "q6ss_slave", "q6ss_master",
 		"q6_axim", NULL
@@ -535,8 +587,24 @@ static const struct adsp_pil_data cdsp_resource_init = {
 	.num_clks = 7,
 };
 
+static const struct adsp_pil_data wpss_resource_init = {
+	.crash_reason_smem = 626,
+	.firmware_name = "wpss.mdt",
+	.ssr_name = "wpss",
+	.sysmon_name = "wpss",
+	.ssctl_id = 0x19,
+	.is_wpss = true,
+	.auto_boot = false,
+	.clk_ids = (const char*[]) {
+		"gcc_wpss_ahb_bdg_mst_clk", "gcc_wpss_ahb_clk",
+		"gcc_wpss_rscp_clk", NULL
+	},
+	.num_clks = 3,
+};
+
 static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,qcs404-cdsp-pil", .data = &cdsp_resource_init },
+	{ .compatible = "qcom,sc7280-wpss-pil", .data = &wpss_resource_init },
 	{ .compatible = "qcom,sdm845-adsp-pil", .data = &adsp_resource_init },
 	{ },
 };
-- 
2.7.4


      parent reply	other threads:[~2021-08-10 18:05 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-10 18:01 [PATCH v2 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-08-10 18:01 ` [PATCH v2 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
2021-08-10 18:01 ` [PATCH v2 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
2021-08-11 17:24   ` Rob Herring
2021-09-09  8:36     ` pillair
2021-08-11 17:37   ` Rob Herring
2021-08-10 18:01 ` Rakesh Pillai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1628618483-664-4-git-send-email-pillair@codeaurora.org \
    --to=pillair@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpubbise@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.