All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: manivannan.sadhasivam@linaro.org
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
	linux-kernel@vger.kernel.org, loic.poulain@linaro.org,
	quic_jhugo@quicinc.com, Bhaumik Bhatt <bbhatt@codeaurora.org>
Subject: [PATCH v2 2/2] bus: mhi: core: Optimize and update MMIO register write method
Date: Thu, 19 Aug 2021 10:15:54 -0700	[thread overview]
Message-ID: <1629393354-20769-3-git-send-email-bbhatt@codeaurora.org> (raw)
In-Reply-To: <1629393354-20769-1-git-send-email-bbhatt@codeaurora.org>

As of now, MMIO writes done after ready state transition use the
mhi_write_reg_field() API even though the whole register is being
written in most cases. Optimize this process by using mhi_write_reg()
API instead for those writes and use the mhi_write_reg_field()
API for MHI config registers only.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/init.c | 64 ++++++++++++++++++++++-----------------------
 1 file changed, 31 insertions(+), 33 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 0917465..e4be171 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -433,75 +433,65 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	struct {
 		u32 offset;
-		u32 mask;
-		u32 shift;
 		u32 val;
 	} reg_info[] = {
 		{
-			CCABAP_HIGHER, U32_MAX, 0,
+			CCABAP_HIGHER,
 			upper_32_bits(mhi_cntrl->mhi_ctxt->chan_ctxt_addr),
 		},
 		{
-			CCABAP_LOWER, U32_MAX, 0,
+			CCABAP_LOWER,
 			lower_32_bits(mhi_cntrl->mhi_ctxt->chan_ctxt_addr),
 		},
 		{
-			ECABAP_HIGHER, U32_MAX, 0,
+			ECABAP_HIGHER,
 			upper_32_bits(mhi_cntrl->mhi_ctxt->er_ctxt_addr),
 		},
 		{
-			ECABAP_LOWER, U32_MAX, 0,
+			ECABAP_LOWER,
 			lower_32_bits(mhi_cntrl->mhi_ctxt->er_ctxt_addr),
 		},
 		{
-			CRCBAP_HIGHER, U32_MAX, 0,
+			CRCBAP_HIGHER,
 			upper_32_bits(mhi_cntrl->mhi_ctxt->cmd_ctxt_addr),
 		},
 		{
-			CRCBAP_LOWER, U32_MAX, 0,
+			CRCBAP_LOWER,
 			lower_32_bits(mhi_cntrl->mhi_ctxt->cmd_ctxt_addr),
 		},
 		{
-			MHICFG, MHICFG_NER_MASK, MHICFG_NER_SHIFT,
-			mhi_cntrl->total_ev_rings,
-		},
-		{
-			MHICFG, MHICFG_NHWER_MASK, MHICFG_NHWER_SHIFT,
-			mhi_cntrl->hw_ev_rings,
-		},
-		{
-			MHICTRLBASE_HIGHER, U32_MAX, 0,
+			MHICTRLBASE_HIGHER,
 			upper_32_bits(mhi_cntrl->iova_start),
 		},
 		{
-			MHICTRLBASE_LOWER, U32_MAX, 0,
+			MHICTRLBASE_LOWER,
 			lower_32_bits(mhi_cntrl->iova_start),
 		},
 		{
-			MHIDATABASE_HIGHER, U32_MAX, 0,
+			MHIDATABASE_HIGHER,
 			upper_32_bits(mhi_cntrl->iova_start),
 		},
 		{
-			MHIDATABASE_LOWER, U32_MAX, 0,
+			MHIDATABASE_LOWER,
 			lower_32_bits(mhi_cntrl->iova_start),
 		},
 		{
-			MHICTRLLIMIT_HIGHER, U32_MAX, 0,
+			MHICTRLLIMIT_HIGHER,
 			upper_32_bits(mhi_cntrl->iova_stop),
 		},
 		{
-			MHICTRLLIMIT_LOWER, U32_MAX, 0,
+			MHICTRLLIMIT_LOWER,
 			lower_32_bits(mhi_cntrl->iova_stop),
 		},
 		{
-			MHIDATALIMIT_HIGHER, U32_MAX, 0,
+			MHIDATALIMIT_HIGHER,
 			upper_32_bits(mhi_cntrl->iova_stop),
 		},
 		{
-			MHIDATALIMIT_LOWER, U32_MAX, 0,
+			MHIDATALIMIT_LOWER,
 			lower_32_bits(mhi_cntrl->iova_stop),
 		},
-		{ 0, 0, 0 }
+		{0, 0}
 	};
 
 	dev_dbg(dev, "Initializing MHI registers\n");
@@ -544,14 +534,22 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
 	mhi_cntrl->mhi_cmd[PRIMARY_CMD_RING].ring.db_addr = base + CRDB_LOWER;
 
 	/* Write to MMIO registers */
-	for (i = 0; reg_info[i].offset; i++) {
-		ret = mhi_write_reg_field(mhi_cntrl, base, reg_info[i].offset,
-					  reg_info[i].mask, reg_info[i].shift,
-					  reg_info[i].val);
-		if (ret) {
-			dev_err(dev, "Unable to write to MMIO registers");
-			return ret;
-		}
+	for (i = 0; reg_info[i].offset; i++)
+		mhi_write_reg(mhi_cntrl, base, reg_info[i].offset,
+			      reg_info[i].val);
+
+	ret = mhi_write_reg_field(mhi_cntrl, base, MHICFG, MHICFG_NER_MASK,
+				  MHICFG_NER_SHIFT, mhi_cntrl->total_ev_rings);
+	if (ret) {
+		dev_err(dev, "Unable to read MHICFG register\n");
+		return ret;
+	}
+
+	ret = mhi_write_reg_field(mhi_cntrl, base, MHICFG, MHICFG_NHWER_MASK,
+				  MHICFG_NHWER_SHIFT, mhi_cntrl->hw_ev_rings);
+	if (ret) {
+		dev_err(dev, "Unable to read MHICFG register\n");
+		return ret;
 	}
 
 	return 0;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


      parent reply	other threads:[~2021-08-19 17:17 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-19 17:15 [PATCH v2 0/2] MHI MMIO register write updates Bhaumik Bhatt
2021-08-19 17:15 ` [PATCH v2 1/2] bus: mhi: core: Bail on writing register fields if read fails Bhaumik Bhatt
2021-08-19 17:15 ` Bhaumik Bhatt [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1629393354-20769-3-git-send-email-bbhatt@codeaurora.org \
    --to=bbhatt@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=quic_jhugo@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.