All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chengwen Feng <fengchengwen@huawei.com>
To: <thomas@monjalon.net>, <ferruh.yigit@intel.com>,
	<bruce.richardson@intel.com>, <jerinj@marvell.com>,
	<jerinjacobk@gmail.com>, <andrew.rybchenko@oktetlabs.ru>
Cc: <dev@dpdk.org>, <mb@smartsharesystems.com>, <nipun.gupta@nxp.com>,
	<hemant.agrawal@nxp.com>, <maxime.coquelin@redhat.com>,
	<honnappa.nagarahalli@arm.com>, <david.marchand@redhat.com>,
	<sburla@marvell.com>, <pkapoor@marvell.com>,
	<konstantin.ananyev@intel.com>
Subject: [dpdk-dev] [PATCH v17 1/8] dmadev: introduce DMA device library public APIs
Date: Sat, 28 Aug 2021 15:29:59 +0800	[thread overview]
Message-ID: <1630135806-21931-2-git-send-email-fengchengwen@huawei.com> (raw)
In-Reply-To: <1630135806-21931-1-git-send-email-fengchengwen@huawei.com>

The 'dmadevice' is a generic type of DMA device.

This patch introduce the 'dmadevice' public APIs which expose generic
operations that can enable configuration and I/O with the DMA devices.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Jerin Jacob <jerinjacobk@gmail.com>
---
 doc/api/doxy-api-index.md |   1 +
 doc/api/doxy-api.conf.in  |   1 +
 lib/dmadev/meson.build    |   4 +
 lib/dmadev/rte_dmadev.h   | 939 ++++++++++++++++++++++++++++++++++++++++++++++
 lib/dmadev/version.map    |  24 ++
 lib/meson.build           |   1 +
 6 files changed, 970 insertions(+)
 create mode 100644 lib/dmadev/meson.build
 create mode 100644 lib/dmadev/rte_dmadev.h
 create mode 100644 lib/dmadev/version.map

diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 1992107..ce08250 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -27,6 +27,7 @@ The public API headers are grouped by topics:
   [event_timer_adapter]    (@ref rte_event_timer_adapter.h),
   [event_crypto_adapter]   (@ref rte_event_crypto_adapter.h),
   [rawdev]             (@ref rte_rawdev.h),
+  [dmadev]             (@ref rte_dmadev.h),
   [metrics]            (@ref rte_metrics.h),
   [bitrate]            (@ref rte_bitrate.h),
   [latency]            (@ref rte_latencystats.h),
diff --git a/doc/api/doxy-api.conf.in b/doc/api/doxy-api.conf.in
index 325a019..a44a92b 100644
--- a/doc/api/doxy-api.conf.in
+++ b/doc/api/doxy-api.conf.in
@@ -34,6 +34,7 @@ INPUT                   = @TOPDIR@/doc/api/doxy-api-index.md \
                           @TOPDIR@/lib/cmdline \
                           @TOPDIR@/lib/compressdev \
                           @TOPDIR@/lib/cryptodev \
+                          @TOPDIR@/lib/dmadev \
                           @TOPDIR@/lib/distributor \
                           @TOPDIR@/lib/efd \
                           @TOPDIR@/lib/ethdev \
diff --git a/lib/dmadev/meson.build b/lib/dmadev/meson.build
new file mode 100644
index 0000000..6d5bd85
--- /dev/null
+++ b/lib/dmadev/meson.build
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2021 HiSilicon Limited.
+
+headers = files('rte_dmadev.h')
diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h
new file mode 100644
index 0000000..e523ebd
--- /dev/null
+++ b/lib/dmadev/rte_dmadev.h
@@ -0,0 +1,939 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 HiSilicon Limited.
+ * Copyright(c) 2021 Intel Corporation.
+ * Copyright(c) 2021 Marvell International Ltd.
+ * Copyright(c) 2021 SmartShare Systems.
+ */
+
+#ifndef _RTE_DMADEV_H_
+#define _RTE_DMADEV_H_
+
+/**
+ * @file rte_dmadev.h
+ *
+ * RTE DMA (Direct Memory Access) device APIs.
+ *
+ * The DMA framework is built on the following model:
+ *
+ *     ---------------   ---------------       ---------------
+ *     | virtual DMA |   | virtual DMA |       | virtual DMA |
+ *     | channel     |   | channel     |       | channel     |
+ *     ---------------   ---------------       ---------------
+ *            |                |                      |
+ *            ------------------                      |
+ *                     |                              |
+ *               ------------                    ------------
+ *               |  dmadev  |                    |  dmadev  |
+ *               ------------                    ------------
+ *                     |                              |
+ *            ------------------               ------------------
+ *            | HW-DMA-channel |               | HW-DMA-channel |
+ *            ------------------               ------------------
+ *                     |                              |
+ *                     --------------------------------
+ *                                     |
+ *                           ---------------------
+ *                           | HW-DMA-Controller |
+ *                           ---------------------
+ *
+ * The DMA controller could have multiple HW-DMA-channels (aka. HW-DMA-queues),
+ * each HW-DMA-channel should be represented by a dmadev.
+ *
+ * The dmadev could create multiple virtual DMA channels, each virtual DMA
+ * channel represents a different transfer context. The DMA operation request
+ * must be submitted to the virtual DMA channel. e.g. Application could create
+ * virtual DMA channel 0 for memory-to-memory transfer scenario, and create
+ * virtual DMA channel 1 for memory-to-device transfer scenario.
+ *
+ * The dmadev are dynamically allocated by rte_dmadev_pmd_allocate() during the
+ * PCI/SoC device probing phase performed at EAL initialization time. And could
+ * be released by rte_dmadev_pmd_release() during the PCI/SoC device removing
+ * phase.
+ *
+ * This framework uses 'uint16_t dev_id' as the device identifier of a dmadev,
+ * and 'uint16_t vchan' as the virtual DMA channel identifier in one dmadev.
+ *
+ * The functions exported by the dmadev API to setup a device designated by its
+ * device identifier must be invoked in the following order:
+ *     - rte_dmadev_configure()
+ *     - rte_dmadev_vchan_setup()
+ *     - rte_dmadev_start()
+ *
+ * Then, the application can invoke dataplane APIs to process jobs.
+ *
+ * If the application wants to change the configuration (i.e. invoke
+ * rte_dmadev_configure() or rte_dmadev_vchan_setup()), it must invoke
+ * rte_dmadev_stop() first to stop the device and then do the reconfiguration
+ * before invoking rte_dmadev_start() again. The dataplane APIs should not be
+ * invoked when the device is stopped.
+ *
+ * Finally, an application can close a dmadev by invoking the
+ * rte_dmadev_close() function.
+ *
+ * The dataplane APIs include two parts:
+ * The first part is the submission of operation requests:
+ *     - rte_dmadev_copy()
+ *     - rte_dmadev_copy_sg()
+ *     - rte_dmadev_fill()
+ *     - rte_dmadev_submit()
+ *
+ * These APIs could work with different virtual DMA channels which have
+ * different contexts.
+ *
+ * The first three APIs are used to submit the operation request to the virtual
+ * DMA channel, if the submission is successful, an uint16_t ring_idx is
+ * returned, otherwise a negative number is returned.
+ *
+ * The last API was used to issue doorbell to hardware, and also there are flags
+ * (@see RTE_DMA_OP_FLAG_SUBMIT) parameter of the first three APIs could do the
+ * same work.
+ *
+ * The second part is to obtain the result of requests:
+ *     - rte_dmadev_completed()
+ *         - return the number of operation requests completed successfully.
+ *     - rte_dmadev_completed_status()
+ *         - return the number of operation requests completed.
+ *
+ * @note If the dmadev works in silent mode (@see RTE_DMADEV_CAPA_SILENT),
+ * application does not invoke the above two completed APIs.
+ *
+ * About the ring_idx which enqueue APIs (e.g. rte_dmadev_copy()
+ * rte_dmadev_fill()) returned, the rules are as follows:
+ *     - ring_idx for each virtual DMA channel are independent.
+ *     - For a virtual DMA channel, the ring_idx is monotonically incremented,
+ *       when it reach UINT16_MAX, it wraps back to zero.
+ *     - This ring_idx can be used by applications to track per-operation
+ *       metadata in an application-defined circular ring.
+ *     - The initial ring_idx of a virtual DMA channel is zero, after the
+ *       device is stopped, the ring_idx needs to be reset to zero.
+ *
+ * One example:
+ *     - step-1: start one dmadev
+ *     - step-2: enqueue a copy operation, the ring_idx return is 0
+ *     - step-3: enqueue a copy operation again, the ring_idx return is 1
+ *     - ...
+ *     - step-101: stop the dmadev
+ *     - step-102: start the dmadev
+ *     - step-103: enqueue a copy operation, the cookie return is 0
+ *     - ...
+ *     - step-x+0: enqueue a fill operation, the ring_idx return is 65535
+ *     - step-x+1: enqueue a copy operation, the ring_idx return is 0
+ *     - ...
+ *
+ * The DMA operation address used in enqueue APIs (i.e. rte_dmadev_copy(),
+ * rte_dmadev_copy_sg(), rte_dmadev_fill()) defined as rte_iova_t type. The
+ * dmadev supports two types of address: memory address and device address.
+ *
+ * - memory address: the source and destination address of the memory-to-memory
+ * transfer type, or the source address of the memory-to-device transfer type,
+ * or the destination address of the device-to-memory transfer type.
+ * @note If the device support SVA (@see RTE_DMADEV_CAPA_SVA), the memory
+ * address can be any VA address, otherwise it must be an IOVA address.
+ *
+ * - device address: the source and destination address of the device-to-device
+ * transfer type, or the source address of the device-to-memory transfer type,
+ * or the destination address of the memory-to-device transfer type.
+ *
+ * By default, all the functions of the dmadev API exported by a PMD are
+ * lock-free functions which assume to not be invoked in parallel on different
+ * logical cores to work on the same target dmadev object.
+ * @note Different virtual DMA channels on the same dmadev *DO NOT* support
+ * parallel invocation because these virtual DMA channels share the same
+ * HW-DMA-channel.
+ *
+ */
+
+#include <rte_common.h>
+#include <rte_compat.h>
+#include <rte_dev.h>
+#include <rte_errno.h>
+#include <rte_memory.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define RTE_DMADEV_NAME_MAX_LEN	RTE_DEV_NAME_MAX_LEN
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get the device identifier for the named DMA device.
+ *
+ * @param name
+ *   DMA device name.
+ *
+ * @return
+ *   Returns DMA device identifier on success.
+ *   - <0: Failure to find named DMA device.
+ */
+__rte_experimental
+int
+rte_dmadev_get_dev_id(const char *name);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * @param dev_id
+ *   DMA device index.
+ *
+ * @return
+ *   - If the device index is valid (true) or not (false).
+ */
+__rte_experimental
+bool
+rte_dmadev_is_valid_dev(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get the total number of DMA devices that have been successfully
+ * initialised.
+ *
+ * @return
+ *   The total number of usable DMA devices.
+ */
+__rte_experimental
+uint16_t
+rte_dmadev_count(void);
+
+/* Enumerates DMA device capabilities. */
+#define RTE_DMADEV_CAPA_MEM_TO_MEM	(1ull << 0)
+/**< DMA device support memory-to-memory transfer.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+
+#define RTE_DMADEV_CAPA_MEM_TO_DEV	(1ull << 1)
+/**< DMA device support memory-to-device transfer.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ * @see struct rte_dmadev_port_param::port_type
+ */
+
+#define RTE_DMADEV_CAPA_DEV_TO_MEM	(1ull << 2)
+/**< DMA device support device-to-memory transfer.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ * @see struct rte_dmadev_port_param::port_type
+ */
+
+#define RTE_DMADEV_CAPA_DEV_TO_DEV	(1ull << 3)
+/**< DMA device support device-to-device transfer.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ * @see struct rte_dmadev_port_param::port_type
+ */
+
+#define RTE_DMADEV_CAPA_SVA		(1ull << 4)
+/**< DMA device support SVA which could use VA as DMA address.
+ * If device support SVA then application could pass any VA address like memory
+ * from rte_malloc(), rte_memzone(), malloc, stack memory.
+ * If device don't support SVA, then application should pass IOVA address which
+ * from rte_malloc(), rte_memzone().
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+
+#define RTE_DMADEV_CAPA_SILENT		(1ull << 5)
+/**< DMA device support work in silent mode.
+ * In this mode, application don't required to invoke rte_dmadev_completed*()
+ * API.
+ *
+ * @see struct rte_dmadev_conf::silent_mode
+ */
+
+#define RTE_DMADEV_CAPA_OPS_COPY	(1ull << 32)
+/**< DMA device support copy ops.
+ * This capability start with index of 32, so that it could leave gap between
+ * normal capability and ops capability.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+
+#define RTE_DMADEV_CAPA_OPS_COPY_SG	(1ull << 33)
+/**< DMA device support scatter-gather list copy ops.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+
+#define RTE_DMADEV_CAPA_OPS_FILL	(1ull << 34)
+/**< DMA device support fill ops.
+ *
+ * @see struct rte_dmadev_info::dev_capa
+ */
+
+/**
+ * A structure used to retrieve the information of a DMA device.
+ */
+struct rte_dmadev_info {
+	struct rte_device *device; /**< Generic Device information. */
+	uint64_t dev_capa; /**< Device capabilities (RTE_DMADEV_CAPA_*). */
+	uint16_t max_vchans;
+	/**< Maximum number of virtual DMA channels supported. */
+	uint16_t max_desc;
+	/**< Maximum allowed number of virtual DMA channel descriptors. */
+	uint16_t min_desc;
+	/**< Minimum allowed number of virtual DMA channel descriptors. */
+	uint16_t max_sges;
+	/**< Maximum number of source or destination scatter-gather entry
+	 * supported.
+	 * If the device does not support COPY_SG capability, this value can be
+	 * zero.
+	 * If the device supports COPY_SG capability, then rte_dmadev_copy_sg()
+	 * parameter nb_src/nb_dst should not exceed this value.
+	 */
+	uint16_t nb_vchans; /**< Number of virtual DMA channel configured. */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve information of a DMA device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param[out] dev_info
+ *   A pointer to a structure of type *rte_dmadev_info* to be filled with the
+ *   information of the device.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info);
+
+/**
+ * A structure used to configure a DMA device.
+ */
+struct rte_dmadev_conf {
+	uint16_t nb_vchans;
+	/**< The number of virtual DMA channels to set up for the DMA device.
+	 * This value cannot be greater than the field 'max_vchans' of struct
+	 * rte_dmadev_info which get from rte_dmadev_info_get().
+	 */
+	bool enable_silent;
+	/**< Indicates whether to enable silent mode.
+	 * false-default mode, true-silent mode.
+	 * This value can be set to true only when the SILENT capability is
+	 * supported.
+	 *
+	 * @see RTE_DMADEV_CAPA_SILENT
+	 */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Configure a DMA device.
+ *
+ * This function must be invoked first before any other function in the
+ * API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * @param dev_id
+ *   The identifier of the device to configure.
+ * @param dev_conf
+ *   The DMA device configuration structure encapsulated into rte_dmadev_conf
+ *   object.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start a DMA device.
+ *
+ * The device start step is the last one and consists of setting the DMA
+ * to start accepting jobs.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_start(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Stop a DMA device.
+ *
+ * The device can be restarted with a call to rte_dmadev_start().
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_stop(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Close a DMA device.
+ *
+ * The device cannot be restarted after this call.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_close(uint16_t dev_id);
+
+/**
+ * rte_dma_direction - DMA transfer direction defines.
+ */
+enum rte_dma_direction {
+	RTE_DMA_DIR_MEM_TO_MEM,
+	/**< DMA transfer direction - from memory to memory.
+	 *
+	 * @see struct rte_dmadev_vchan_conf::direction
+	 */
+	RTE_DMA_DIR_MEM_TO_DEV,
+	/**< DMA transfer direction - from memory to device.
+	 * In a typical scenario, the SoCs are installed on host servers as
+	 * iNICs through the PCIe interface. In this case, the SoCs works in
+	 * EP(endpoint) mode, it could initiate a DMA move request from memory
+	 * (which is SoCs memory) to device (which is host memory).
+	 *
+	 * @see struct rte_dmadev_vchan_conf::direction
+	 */
+	RTE_DMA_DIR_DEV_TO_MEM,
+	/**< DMA transfer direction - from device to memory.
+	 * In a typical scenario, the SoCs are installed on host servers as
+	 * iNICs through the PCIe interface. In this case, the SoCs works in
+	 * EP(endpoint) mode, it could initiate a DMA move request from device
+	 * (which is host memory) to memory (which is SoCs memory).
+	 *
+	 * @see struct rte_dmadev_vchan_conf::direction
+	 */
+	RTE_DMA_DIR_DEV_TO_DEV,
+	/**< DMA transfer direction - from device to device.
+	 * In a typical scenario, the SoCs are installed on host servers as
+	 * iNICs through the PCIe interface. In this case, the SoCs works in
+	 * EP(endpoint) mode, it could initiate a DMA move request from device
+	 * (which is host memory) to the device (which is another host memory).
+	 *
+	 * @see struct rte_dmadev_vchan_conf::direction
+	 */
+};
+
+/**
+ * enum rte_dmadev_port_type - DMA access port type defines.
+ *
+ * @see struct rte_dmadev_port_param::port_type
+ */
+enum rte_dmadev_port_type {
+	RTE_DMADEV_PORT_NONE,
+	RTE_DMADEV_PORT_PCIE, /**< The DMA access port is PCIe. */
+};
+
+/**
+ * A structure used to descript DMA access port parameters.
+ *
+ * @see struct rte_dmadev_vchan_conf::src_port
+ * @see struct rte_dmadev_vchan_conf::dst_port
+ */
+struct rte_dmadev_port_param {
+	enum rte_dmadev_port_type port_type;
+	/**< The device access port type.
+	 * @see enum rte_dmadev_port_type
+	 */
+	union {
+		/** PCIe access port parameters.
+		 *
+		 * The following model shows SoC's PCIe module connects to
+		 * multiple PCIe hosts and multiple endpoints. The PCIe module
+		 * has an integrated DMA controller.
+		 *
+		 * If the DMA wants to access the memory of host A, it can be
+		 * initiated by PF1 in core0, or by VF0 of PF0 in core0.
+		 *
+		 * \code{.unparsed}
+		 * System Bus
+		 *    |     ----------PCIe module----------
+		 *    |     Bus
+		 *    |     Interface
+		 *    |     -----        ------------------
+		 *    |     |   |        | PCIe Core0     |
+		 *    |     |   |        |                |        -----------
+		 *    |     |   |        |   PF-0 -- VF-0 |        | Host A  |
+		 *    |     |   |--------|        |- VF-1 |--------| Root    |
+		 *    |     |   |        |   PF-1         |        | Complex |
+		 *    |     |   |        |   PF-2         |        -----------
+		 *    |     |   |        ------------------
+		 *    |     |   |
+		 *    |     |   |        ------------------
+		 *    |     |   |        | PCIe Core1     |
+		 *    |     |   |        |                |        -----------
+		 *    |     |   |        |   PF-0 -- VF-0 |        | Host B  |
+		 *    |-----|   |--------|   PF-1 -- VF-0 |--------| Root    |
+		 *    |     |   |        |        |- VF-1 |        | Complex |
+		 *    |     |   |        |   PF-2         |        -----------
+		 *    |     |   |        ------------------
+		 *    |     |   |
+		 *    |     |   |        ------------------
+		 *    |     |DMA|        |                |        ------
+		 *    |     |   |        |                |--------| EP |
+		 *    |     |   |--------| PCIe Core2     |        ------
+		 *    |     |   |        |                |        ------
+		 *    |     |   |        |                |--------| EP |
+		 *    |     |   |        |                |        ------
+		 *    |     -----        ------------------
+		 *
+		 * \endcode
+		 *
+		 * @note If some fields can not be supported by the
+		 * hardware/driver, then the driver ignores those fields.
+		 * Please check driver-specific documentation for limitations
+		 * and capablites.
+		 */
+		struct {
+			uint64_t coreid : 4; /**< PCIe core id used. */
+			uint64_t pfid : 8; /**< PF id used. */
+			uint64_t vfen : 1; /**< VF enable bit. */
+			uint64_t vfid : 16; /**< VF id used. */
+			uint64_t pasid : 20;
+			/**< The pasid filed in TLP packet. */
+			uint64_t attr : 3;
+			/**< The attributes filed in TLP packet. */
+			uint64_t ph : 2;
+			/**< The processing hint filed in TLP packet. */
+			uint64_t st : 16;
+			/**< The steering tag filed in TLP packet. */
+		} pcie;
+	};
+	uint64_t reserved[2]; /**< Reserved for future fields. */
+};
+
+/**
+ * A structure used to configure a virtual DMA channel.
+ */
+struct rte_dmadev_vchan_conf {
+	enum rte_dma_direction direction;
+	/**< Transfer direction
+	 * @see enum rte_dma_direction
+	 */
+	uint16_t nb_desc;
+	/**< Number of descriptor for the virtual DMA channel */
+	struct rte_dmadev_port_param src_port;
+	/**< 1) Used to describes the device access port parameter in the
+	 * device-to-memory transfer scenario.
+	 * 2) Used to describes the source device access port parameter in the
+	 * device-to-device transfer scenario.
+	 * @see struct rte_dmadev_port_param
+	 */
+	struct rte_dmadev_port_param dst_port;
+	/**< 1) Used to describes the device access port parameter in the
+	 * memory-to-device transfer scenario.
+	 * 2) Used to describes the destination device access port parameter in
+	 * the device-to-device transfer scenario.
+	 * @see struct rte_dmadev_port_param
+	 */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Allocate and set up a virtual DMA channel.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel. The value must be in the range
+ *   [0, nb_vchans - 1] previously supplied to rte_dmadev_configure().
+ * @param conf
+ *   The virtual DMA channel configuration structure encapsulated into
+ *   rte_dmadev_vchan_conf object.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_vchan_setup(uint16_t dev_id, uint16_t vchan,
+		       const struct rte_dmadev_vchan_conf *conf);
+
+/**
+ * rte_dmadev_stats - running statistics.
+ */
+struct rte_dmadev_stats {
+	uint64_t submitted;
+	/**< Count of operations which were submitted to hardware. */
+	uint64_t completed;
+	/**< Count of operations which were completed. */
+	uint64_t errors;
+	/**< Count of operations which failed to complete. */
+};
+
+#define RTE_DMADEV_ALL_VCHAN	0xFFFFu
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve basic statistics of a or all virtual DMA channel(s).
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ *   If equal RTE_DMADEV_ALL_VCHAN means all channels.
+ * @param[out] stats
+ *   The basic statistics structure encapsulated into rte_dmadev_stats
+ *   object.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_stats_get(uint16_t dev_id, uint16_t vchan,
+		     struct rte_dmadev_stats *stats);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Reset basic statistics of a or all virtual DMA channel(s).
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ *   If equal RTE_DMADEV_ALL_VCHAN means all channels.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_stats_reset(uint16_t dev_id, uint16_t vchan);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Dump DMA device info.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param f
+ *   The file to write the output to.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_dump(uint16_t dev_id, FILE *f);
+
+/**
+ * rte_dma_status_code - DMA transfer result status code defines.
+ */
+enum rte_dma_status_code {
+	RTE_DMA_STATUS_SUCCESSFUL,
+	/**< The operation completed successfully. */
+	RTE_DMA_STATUS_USER_ABORT,
+	/**< The operation failed to complete due abort by user.
+	 * This is mainly used when processing dev_stop, user could modidy the
+	 * descriptors (e.g. change one bit to tell hardware abort this job),
+	 * it allows outstanding requests to be complete as much as possible,
+	 * so reduce the time to stop the device.
+	 */
+	RTE_DMA_STATUS_NOT_ATTEMPTED,
+	/**< The operation failed to complete due to following scenarios:
+	 * The jobs in a particular batch are not attempted because they
+	 * appeared after a fence where a previous job failed. In some HW
+	 * implementation it's possible for jobs from later batches would be
+	 * completed, though, so report the status from the not attempted jobs
+	 * before reporting those newer completed jobs.
+	 */
+	RTE_DMA_STATUS_INVALID_SRC_ADDR,
+	/**< The operation failed to complete due invalid source address. */
+	RTE_DMA_STATUS_INVALID_DST_ADDR,
+	/**< The operation failed to complete due invalid destination
+	 * address.
+	 */
+	RTE_DMA_STATUS_INVALID_ADDR,
+	/**< The operation failed to complete due invalid source or destination
+	 * address, cover the case that only knows the address error, but not
+	 * sure which address error.
+	 */
+	RTE_DMA_STATUS_INVALID_LENGTH,
+	/**< The operation failed to complete due invalid length. */
+	RTE_DMA_STATUS_INVALID_OPCODE,
+	/**< The operation failed to complete due invalid opcode.
+	 * The DMA descriptor could have multiple format, which are
+	 * distinguished by the opcode field.
+	 */
+	RTE_DMA_STATUS_BUS_ERROR,
+	/**< The operation failed to complete due bus err. */
+	RTE_DMA_STATUS_DATA_POISION,
+	/**< The operation failed to complete due data poison. */
+	RTE_DMA_STATUS_DESCRIPTOR_READ_ERROR,
+	/**< The operation failed to complete due descriptor read error. */
+	RTE_DMA_STATUS_DEV_LINK_ERROR,
+	/**< The operation failed to complete due device link error.
+	 * Used to indicates that the link error in the memory-to-device/
+	 * device-to-memory/device-to-device transfer scenario.
+	 */
+	RTE_DMA_STATUS_ERROR_UNKNOWN = 0x100,
+	/**< The operation failed to complete due unknown reason.
+	 * The initial value is 256, which reserves space for future errors.
+	 */
+};
+
+/**
+ * rte_dmadev_sge - can hold scatter-gather DMA operation request entry.
+ */
+struct rte_dmadev_sge {
+	rte_iova_t addr; /**< The DMA operation address. */
+	uint32_t length; /**< The DMA operation length. */
+};
+
+/* DMA flags to augment operation preparation. */
+#define RTE_DMA_OP_FLAG_FENCE	(1ull << 0)
+/**< DMA fence flag.
+ * It means the operation with this flag must be processed only after all
+ * previous operations are completed.
+ * If the specify DMA HW works in-order (it means it has default fence between
+ * operations), this flag could be NOP.
+ *
+ * @see rte_dmadev_copy()
+ * @see rte_dmadev_copy_sg()
+ * @see rte_dmadev_fill()
+ */
+
+#define RTE_DMA_OP_FLAG_SUBMIT	(1ull << 1)
+/**< DMA submit flag.
+ * It means the operation with this flag must issue doorbell to hardware after
+ * enqueued jobs.
+ */
+
+#define RTE_DMA_OP_FLAG_LLC	(1ull << 2)
+/**< DMA write data to low level cache hint.
+ * Used for performance optimization, this is just a hint, and there is no
+ * capability bit for this, driver should not return error if this flag was set.
+ */
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a copy operation onto the virtual DMA channel.
+ *
+ * This queues up a copy operation to be performed by hardware, if the 'flags'
+ * parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell to begin
+ * this operation, otherwise do not trigger doorbell.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param src
+ *   The address of the source buffer.
+ * @param dst
+ *   The address of the destination buffer.
+ * @param length
+ *   The length of the data to be copied.
+ * @param flags
+ *   An flags for this operation.
+ *   @see RTE_DMA_OP_FLAG_*
+ *
+ * @return
+ *   - 0..UINT16_MAX: index of enqueued job.
+ *   - -ENOSPC: if no space left to enqueue.
+ *   - other values < 0 on failure.
+ */
+__rte_experimental
+int
+rte_dmadev_copy(uint16_t dev_id, uint16_t vchan, rte_iova_t src, rte_iova_t dst,
+		uint32_t length, uint64_t flags);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a scatter-gather list copy operation onto the virtual DMA channel.
+ *
+ * This queues up a scatter-gather list copy operation to be performed by
+ * hardware, if the 'flags' parameter contains RTE_DMA_OP_FLAG_SUBMIT then
+ * trigger doorbell to begin this operation, otherwise do not trigger doorbell.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param src
+ *   The pointer of source scatter-gather entry array.
+ * @param dst
+ *   The pointer of destination scatter-gather entry array.
+ * @param nb_src
+ *   The number of source scatter-gather entry.
+ *   @see struct rte_dmadev_info::max_sges
+ * @param nb_dst
+ *   The number of destination scatter-gather entry.
+ *   @see struct rte_dmadev_info::max_sges
+ * @param flags
+ *   An flags for this operation.
+ *   @see RTE_DMA_OP_FLAG_*
+ *
+ * @return
+ *   - 0..UINT16_MAX: index of enqueued job.
+ *   - -ENOSPC: if no space left to enqueue.
+ *   - other values < 0 on failure.
+ */
+__rte_experimental
+int
+rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vchan, struct rte_dmadev_sge *src,
+		   struct rte_dmadev_sge *dst, uint16_t nb_src, uint16_t nb_dst,
+		   uint64_t flags);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a fill operation onto the virtual DMA channel.
+ *
+ * This queues up a fill operation to be performed by hardware, if the 'flags'
+ * parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell to begin
+ * this operation, otherwise do not trigger doorbell.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param pattern
+ *   The pattern to populate the destination buffer with.
+ * @param dst
+ *   The address of the destination buffer.
+ * @param length
+ *   The length of the destination buffer.
+ * @param flags
+ *   An flags for this operation.
+ *   @see RTE_DMA_OP_FLAG_*
+ *
+ * @return
+ *   - 0..UINT16_MAX: index of enqueued job.
+ *   - -ENOSPC: if no space left to enqueue.
+ *   - other values < 0 on failure.
+ */
+__rte_experimental
+int
+rte_dmadev_fill(uint16_t dev_id, uint16_t vchan, uint64_t pattern,
+		rte_iova_t dst, uint32_t length, uint64_t flags);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Trigger hardware to begin performing enqueued operations.
+ *
+ * This API is used to write the "doorbell" to the hardware to trigger it
+ * to begin the operations previously enqueued by rte_dmadev_copy/fill().
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ *
+ * @return
+ *   0 on success. Otherwise negative value is returned.
+ */
+__rte_experimental
+int
+rte_dmadev_submit(uint16_t dev_id, uint16_t vchan);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Returns the number of operations that have been successfully completed.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param nb_cpls
+ *   The maximum number of completed operations that can be processed.
+ * @param[out] last_idx
+ *   The last completed operation's index.
+ *   If not required, NULL can be passed in.
+ * @param[out] has_error
+ *   Indicates if there are transfer error.
+ *   If not required, NULL can be passed in.
+ *
+ * @return
+ *   The number of operations that successfully completed. This return value
+ *   must be less than or equal to the value of nb_cpls.
+ */
+__rte_experimental
+uint16_t
+rte_dmadev_completed(uint16_t dev_id, uint16_t vchan, const uint16_t nb_cpls,
+		     uint16_t *last_idx, bool *has_error);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Returns the number of operations that have been completed, and the
+ * operations result may succeed or fail.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vchan
+ *   The identifier of virtual DMA channel.
+ * @param nb_cpls
+ *   Indicates the size of status array.
+ * @param[out] last_idx
+ *   The last completed operation's index.
+ *   If not required, NULL can be passed in.
+ * @param[out] status
+ *   This is a pointer to an array of length 'nb_cpls' that holds the completion
+ *   status code of each operation.
+ *   @see enum rte_dma_status_code
+ *
+ * @return
+ *   The number of operations that completed. This return value must be less
+ *   than or equal to the value of nb_cpls.
+ *   If this number is greater than zero (assuming n), then n values in the
+ *   status array are also set.
+ */
+__rte_experimental
+uint16_t
+rte_dmadev_completed_status(uint16_t dev_id, uint16_t vchan,
+			    const uint16_t nb_cpls, uint16_t *last_idx,
+			    enum rte_dma_status_code *status);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_DMADEV_H_ */
diff --git a/lib/dmadev/version.map b/lib/dmadev/version.map
new file mode 100644
index 0000000..2e37882
--- /dev/null
+++ b/lib/dmadev/version.map
@@ -0,0 +1,24 @@
+EXPERIMENTAL {
+	global:
+
+	rte_dmadev_close;
+	rte_dmadev_completed;
+	rte_dmadev_completed_status;
+	rte_dmadev_configure;
+	rte_dmadev_copy;
+	rte_dmadev_copy_sg;
+	rte_dmadev_count;
+	rte_dmadev_dump;
+	rte_dmadev_fill;
+	rte_dmadev_get_dev_id;
+	rte_dmadev_info_get;
+	rte_dmadev_is_valid_dev;
+	rte_dmadev_start;
+	rte_dmadev_stats_get;
+	rte_dmadev_stats_reset;
+	rte_dmadev_stop;
+	rte_dmadev_submit;
+	rte_dmadev_vchan_setup;
+
+	local: *;
+};
diff --git a/lib/meson.build b/lib/meson.build
index 1673ca4..a542c23 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -44,6 +44,7 @@ libraries = [
         'power',
         'pdump',
         'rawdev',
+        'dmadev',
         'regexdev',
         'rib',
         'reorder',
-- 
2.8.1


  reply	other threads:[~2021-08-28  7:34 UTC|newest]

Thread overview: 339+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-02 13:18 [dpdk-dev] [PATCH] dmadev: introduce DMA device library Chengwen Feng
2021-07-02 13:59 ` Bruce Richardson
2021-07-04  9:30 ` Jerin Jacob
2021-07-05 10:52   ` Bruce Richardson
2021-07-05 11:12     ` Morten Brørup
2021-07-05 13:44       ` Bruce Richardson
2021-07-05 15:55     ` Jerin Jacob
2021-07-05 17:16       ` Bruce Richardson
2021-07-07  8:08         ` Jerin Jacob
2021-07-07  8:35           ` Bruce Richardson
2021-07-07 10:34             ` Jerin Jacob
2021-07-07 11:01               ` Bruce Richardson
2021-07-08  3:11                 ` fengchengwen
2021-07-08 18:35                   ` Jerin Jacob
2021-07-09  9:14                     ` Bruce Richardson
2021-07-11  7:14                       ` Jerin Jacob
2021-07-12  7:01                         ` Morten Brørup
2021-07-12  7:59                           ` Jerin Jacob
2021-07-06  8:20     ` fengchengwen
2021-07-06  9:27       ` Bruce Richardson
2021-07-06  3:01   ` fengchengwen
2021-07-06 10:01     ` Bruce Richardson
2021-07-04 14:57 ` Andrew Rybchenko
2021-07-06  3:56   ` fengchengwen
2021-07-06 10:02     ` Bruce Richardson
2021-07-04 15:21 ` Matan Azrad
2021-07-06  6:25   ` fengchengwen
2021-07-06  6:50     ` Matan Azrad
2021-07-06  9:08       ` fengchengwen
2021-07-06  9:17         ` Matan Azrad
2021-07-06 20:28 ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 1/9] dmadev: add missing exports Bruce Richardson
2021-07-07  8:26     ` David Marchand
2021-07-07  8:36       ` Bruce Richardson
2021-07-07  8:57         ` David Marchand
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 2/9] dmadev: change virtual addresses to IOVA Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 3/9] dmadev: add dump function Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 4/9] dmadev: remove xstats functions Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 5/9] dmadev: drop cookie typedef Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 6/9] dmadev: allow NULL parameters to completed ops call Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 7/9] dmadev: stats structure updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 8/9] drivers: add dma driver category Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 9/9] app/test: add basic dmadev unit test Bruce Richardson
2021-07-07  3:16   ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates fengchengwen
2021-07-07  8:11     ` Bruce Richardson
2021-07-07  8:14     ` Bruce Richardson
2021-07-07 10:42     ` Jerin Jacob
2021-07-11  9:25 ` [dpdk-dev] [PATCH v2] dmadev: introduce DMA device library Chengwen Feng
2021-07-11  9:42   ` fengchengwen
2021-07-11 13:34     ` Jerin Jacob
2021-07-12  7:40       ` Morten Brørup
2021-07-11 14:25   ` Jerin Jacob
2021-07-12  7:15   ` Morten Brørup
2021-07-12  9:59   ` Jerin Jacob
2021-07-12 13:32     ` Bruce Richardson
2021-07-12 16:34       ` Jerin Jacob
2021-07-12 17:00         ` Bruce Richardson
2021-07-13  8:59           ` Jerin Jacob
2021-07-12 12:05   ` Bruce Richardson
2021-07-12 15:50   ` Bruce Richardson
2021-07-13  9:07     ` Jerin Jacob
2021-07-13 14:19   ` Ananyev, Konstantin
2021-07-13 14:28     ` Bruce Richardson
2021-07-13 12:27 ` [dpdk-dev] [PATCH v3] " Chengwen Feng
2021-07-13 13:06   ` fengchengwen
2021-07-13 13:37     ` Bruce Richardson
2021-07-15  6:44       ` Jerin Jacob
2021-07-15  8:25         ` Bruce Richardson
2021-07-15  9:49           ` Jerin Jacob
2021-07-15 10:00             ` Bruce Richardson
2021-07-13 16:02   ` Bruce Richardson
2021-07-14 12:22   ` Nipun Gupta
2021-07-15  8:29     ` fengchengwen
2021-07-15 11:16       ` Nipun Gupta
2021-07-15 12:11         ` Bruce Richardson
2021-07-15 12:31           ` Jerin Jacob
2021-07-15 12:34             ` Nipun Gupta
2021-07-14 16:05   ` Bruce Richardson
2021-07-15  7:10   ` Jerin Jacob
2021-07-15  9:03     ` Bruce Richardson
2021-07-15  9:30       ` Jerin Jacob
2021-07-15 10:03         ` Bruce Richardson
2021-07-15 10:05           ` Bruce Richardson
2021-07-15 15:41 ` [dpdk-dev] [PATCH v4] " Chengwen Feng
2021-07-15 16:04   ` fengchengwen
2021-07-15 16:33     ` Bruce Richardson
2021-07-16  3:04       ` fengchengwen
2021-07-16  9:50         ` Bruce Richardson
2021-07-16 12:34           ` Jerin Jacob
2021-07-16 12:40         ` Jerin Jacob
2021-07-16 12:48           ` Bruce Richardson
2021-07-16 12:54     ` Jerin Jacob
2021-07-16  2:45 ` [dpdk-dev] [PATCH v5] " Chengwen Feng
2021-07-16 13:20   ` Jerin Jacob
2021-07-16 14:41   ` Bruce Richardson
2021-07-19  3:29 ` [dpdk-dev] [PATCH v6] " Chengwen Feng
2021-07-19  6:21   ` Jerin Jacob
2021-07-19 13:20     ` fengchengwen
2021-07-19 13:36       ` Jerin Jacob
2021-07-19 13:05 ` [dpdk-dev] [PATCH v7] " Chengwen Feng
2021-07-20  1:14 ` [dpdk-dev] [PATCH v8] " Chengwen Feng
2021-07-20  5:03   ` Jerin Jacob
2021-07-20  6:53     ` fengchengwen
2021-07-20  9:43       ` Jerin Jacob
2021-07-20 10:13       ` Bruce Richardson
2021-07-20 11:12 ` [dpdk-dev] [PATCH v9] " Chengwen Feng
2021-07-20 12:05   ` Bruce Richardson
2021-07-20 12:46 ` [dpdk-dev] [PATCH v10] " Chengwen Feng
2021-07-26  6:53   ` fengchengwen
2021-07-26  8:31     ` Bruce Richardson
2021-07-27  3:57       ` fengchengwen
2021-07-26 11:03     ` Morten Brørup
2021-07-26 11:21       ` Jerin Jacob
2021-07-27  3:39 ` [dpdk-dev] [PATCH v11 0/2] support dmadev Chengwen Feng
2021-07-27  3:39   ` [dpdk-dev] [PATCH v11 1/2] dmadev: introduce DMA device library Chengwen Feng
2021-07-28 11:13     ` Bruce Richardson
2021-07-29  1:26       ` fengchengwen
2021-07-29  9:15         ` Bruce Richardson
2021-07-29 13:33           ` fengchengwen
2021-07-29 10:44         ` Jerin Jacob
2021-07-29 13:30           ` fengchengwen
2021-07-27  3:40   ` [dpdk-dev] [PATCH v11 2/2] doc: add dmadev library guide Chengwen Feng
2021-07-29 11:02     ` Jerin Jacob
2021-07-29 13:13       ` fengchengwen
2021-07-29 13:28         ` fengchengwen
2021-07-29 13:06 ` [dpdk-dev] [PATCH v12 0/6] support dmadev Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 5/6] doc: add DMA device library guide Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:29 ` [dpdk-dev] [PATCH v13 0/6] support dmadev Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-05 12:56     ` Walsh, Conor
2021-08-05 13:12       ` fengchengwen
2021-08-05 13:44         ` Conor Walsh
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-03 14:55     ` Jerin Jacob
2021-08-05 13:15       ` fengchengwen
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:46   ` [dpdk-dev] [PATCH v13 0/6] support dmadev fengchengwen
2021-08-10 11:54 ` [dpdk-dev] [PATCH v14 " Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-10 15:27     ` Walsh, Conor
2021-08-11  0:47       ` fengchengwen
2021-08-13  9:20       ` fengchengwen
2021-08-13 10:12         ` Walsh, Conor
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-13  9:09 ` [dpdk-dev] [PATCH v15 0/6] support dmadev Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-19 14:52     ` Bruce Richardson
2021-08-23  3:43       ` fengchengwen
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-23  3:31 ` [dpdk-dev] [PATCH v16 0/9] support dmadev Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 1/9] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 2/9] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 3/9] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 4/9] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 5/9] doc: add DMA device library guide Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 6/9] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-26 18:39     ` Bruce Richardson
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 7/9] dma/skeleton: add test cases Chengwen Feng
2021-08-23 14:03     ` Bruce Richardson
2021-08-26  9:30       ` fengchengwen
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 8/9] test: enable dmadev skeleton test Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 9/9] maintainers: add for dmadev Chengwen Feng
2021-08-28  7:29 ` [dpdk-dev] [PATCH v17 0/8] support dmadev Chengwen Feng
2021-08-28  7:29   ` Chengwen Feng [this message]
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 5/8] doc: add DMA device library guide Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 7/8] app/test: add dmadev API test Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 8/8] maintainers: add for dmadev Chengwen Feng
2021-08-28  8:25     ` fengchengwen
2021-08-30  8:19       ` Bruce Richardson
2021-09-02 10:54 ` [dpdk-dev] [PATCH v18 0/8] support dmadev Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 5/8] doc: add DMA device library guide Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 7/8] app/test: add dmadev API test Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 8/8] maintainers: add for dmadev Chengwen Feng
2021-09-02 11:51     ` Bruce Richardson
2021-09-02 13:39       ` fengchengwen
2021-09-03 12:59         ` Maxime Coquelin
2021-09-04  7:02           ` fengchengwen
2021-09-06  1:46             ` Li, Xiaoyun
2021-09-06  8:00               ` fengchengwen
2021-09-06  2:03           ` Xia, Chenbo
2021-09-06  8:01             ` fengchengwen
2021-09-02 13:13 ` [dpdk-dev] [PATCH v19 0/7] support dmadev Chengwen Feng
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-03 11:42     ` Gagandeep Singh
2021-09-04  1:31       ` fengchengwen
2021-09-06  6:48         ` Gagandeep Singh
2021-09-06  7:52           ` fengchengwen
2021-09-06  8:06             ` Jerin Jacob
2021-09-06  8:08             ` Bruce Richardson
2021-09-07 12:55             ` fengchengwen
2021-09-03 13:03     ` Bruce Richardson
2021-09-04  3:05       ` fengchengwen
2021-09-04 10:10       ` Morten Brørup
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:30       ` Bruce Richardson
2021-09-03 15:35     ` Conor Walsh
2021-09-04  8:52       ` fengchengwen
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-03 15:14     ` Kevin Laatz
2021-09-04  7:17       ` fengchengwen
2021-09-03 15:36     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-02 14:11     ` Walsh, Conor
2021-09-03  0:39       ` fengchengwen
2021-09-03 15:38         ` Walsh, Conor
2021-09-04  7:22           ` fengchengwen
2021-09-03 15:14     ` Kevin Laatz
2021-09-04 10:10 ` [dpdk-dev] [PATCH v20 0/7] support dmadev Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-06 13:35     ` Bruce Richardson
2021-09-07 13:05       ` fengchengwen
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-04 10:17     ` Jerin Jacob
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-06 13:37   ` [dpdk-dev] [PATCH v20 0/7] support dmadev Bruce Richardson
2021-09-07 12:56 ` [dpdk-dev] [PATCH v21 " Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-09 10:33     ` Thomas Monjalon
2021-09-09 11:18       ` Bruce Richardson
2021-09-09 11:29         ` Thomas Monjalon
2021-09-09 12:45           ` Bruce Richardson
2021-09-09 13:54             ` fengchengwen
2021-09-09 14:26               ` Thomas Monjalon
2021-09-09 14:31                 ` Bruce Richardson
2021-09-09 14:28               ` Bruce Richardson
2021-09-09 15:12                 ` Morten Brørup
2021-09-09 13:33       ` fengchengwen
2021-09-09 14:19         ` Thomas Monjalon
2021-09-16  3:57       ` fengchengwen
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-08  9:54     ` Walsh, Conor
2021-09-09 13:25       ` fengchengwen
2021-09-15 13:51     ` Kevin Laatz
2021-09-15 14:34       ` Bruce Richardson
2021-09-15 14:47         ` Kevin Laatz
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-16  3:41 ` [dpdk-dev] [PATCH v22 0/5] support dmadev Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 1/5] dmadev: introduce DMA device library Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 2/5] dmadev: add control plane function support Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 3/5] dmadev: add data " Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 4/5] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 5/5] app/test: add dmadev API test Chengwen Feng
2021-09-24 10:53 ` [dpdk-dev] [PATCH v23 0/6] support dmadev Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-04 21:12     ` Radha Mohan
2021-10-05  8:24       ` Kevin Laatz
2021-10-05 16:39         ` Radha Mohan
2021-10-08  1:52       ` fengchengwen
2021-10-06 10:26     ` Thomas Monjalon
2021-10-08  7:13       ` fengchengwen
2021-10-08 10:09         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 2/6] dmadev: add control plane function support Chengwen Feng
2021-10-05 10:16     ` Matan Azrad
2021-10-08  3:28       ` fengchengwen
2021-10-06 10:46     ` Thomas Monjalon
2021-10-08  7:55       ` fengchengwen
2021-10-08 10:18         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 3/6] dmadev: add data " Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 4/6] dmadev: add multi-process support Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-09  9:33 ` [dpdk-dev] [PATCH v24 0/6] support dmadev Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 3/6] dmadev: add data " Chengwen Feng
2021-10-09 10:03     ` fengchengwen
2021-10-11 10:40     ` Bruce Richardson
2021-10-11 12:31       ` fengchengwen
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-11  7:33 ` [dpdk-dev] [PATCH v25 0/6] support dmadev Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-12 19:09     ` Thomas Monjalon
2021-10-13  0:21       ` fengchengwen
2021-10-13  7:41         ` Thomas Monjalon
2021-10-15  8:29           ` Thomas Monjalon
2021-10-15  9:59             ` fengchengwen
2021-10-15 13:46               ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-11 15:44     ` Bruce Richardson
2021-10-12  3:57       ` fengchengwen
2021-10-12 18:57     ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 3/6] dmadev: add data " Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-13 12:24 ` [dpdk-dev] [PATCH v26 0/6] support dmadev Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 3/6] dmadev: add data " Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-13 12:25   ` [dpdk-dev] [PATCH v26 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-17 19:17   ` [dpdk-dev] [PATCH v26 0/6] support dmadev Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1630135806-21931-2-git-send-email-fengchengwen@huawei.com \
    --to=fengchengwen@huawei.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=honnappa.nagarahalli@arm.com \
    --cc=jerinj@marvell.com \
    --cc=jerinjacobk@gmail.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=mb@smartsharesystems.com \
    --cc=nipun.gupta@nxp.com \
    --cc=pkapoor@marvell.com \
    --cc=sburla@marvell.com \
    --cc=thomas@monjalon.net \
    --subject='Re: [dpdk-dev] [PATCH v17 1/8] dmadev: introduce DMA device library public APIs' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.