* [PATCH v6 0/7] Introducing an attribute to select the time setting
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
v6:
Add the judgment condition, clear the handshake signal between dma and
i2c when multiple msgs are transmitted.
v5:
1. Replace the previous variable name "default_timing_adjust" with "use-default-timing"
2. Added waiting for dma reset mechanism
3. Remove received patch(dt-bindings: i2c: update bindings for MT8195 SOC)
v4:
1. Remove the repeated assignment of the inter_clk_div parameter
2. Modify the wrong assignment of OFFSET_MULTI_DMA
3. Unify the log print format of the i2c_dump_register() and drop the extra outer parentheses
4. Place the fixes at the very least
5. Add fixed tags 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
6. Add "i2c: mediatek: modify bus speed calculation formula"
7. Fix single line characters exceeding 80 characters
8. Combine two different series of patches.
v3:
1. Fix code errors caused by v2 modification
v2:
1. Add "dt-bindings: i2c: add attribute default-timing-adjust"
2. Split the fix into sepatate patch.
Kewei Xu (7):
i2c: mediatek: fixing the incorrect register offset
i2c: mediatek: Reset the handshake signal between i2c and dma
i2c: mediatek: Dump i2c/dma register when a timeout occurs
dt-bindings: i2c: add attribute use-default-timing
i2c: mediatek: Add OFFSET_EXT_CONF setting back
i2c: mediatek: Isolate speed setting via dts for special devices
i2c: mediatek: modify bus speed calculation formula
.../devicetree/bindings/i2c/i2c-mt65xx.txt | 2 +
drivers/i2c/busses/i2c-mt65xx.c | 207 ++++++++++++++++--
2 files changed, 192 insertions(+), 17 deletions(-)
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 42+ messages in thread* [PATCH v6 0/7] Introducing an attribute to select the time setting
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
v6:
Add the judgment condition, clear the handshake signal between dma and
i2c when multiple msgs are transmitted.
v5:
1. Replace the previous variable name "default_timing_adjust" with "use-default-timing"
2. Added waiting for dma reset mechanism
3. Remove received patch(dt-bindings: i2c: update bindings for MT8195 SOC)
v4:
1. Remove the repeated assignment of the inter_clk_div parameter
2. Modify the wrong assignment of OFFSET_MULTI_DMA
3. Unify the log print format of the i2c_dump_register() and drop the extra outer parentheses
4. Place the fixes at the very least
5. Add fixed tags 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
6. Add "i2c: mediatek: modify bus speed calculation formula"
7. Fix single line characters exceeding 80 characters
8. Combine two different series of patches.
v3:
1. Fix code errors caused by v2 modification
v2:
1. Add "dt-bindings: i2c: add attribute default-timing-adjust"
2. Split the fix into sepatate patch.
Kewei Xu (7):
i2c: mediatek: fixing the incorrect register offset
i2c: mediatek: Reset the handshake signal between i2c and dma
i2c: mediatek: Dump i2c/dma register when a timeout occurs
dt-bindings: i2c: add attribute use-default-timing
i2c: mediatek: Add OFFSET_EXT_CONF setting back
i2c: mediatek: Isolate speed setting via dts for special devices
i2c: mediatek: modify bus speed calculation formula
.../devicetree/bindings/i2c/i2c-mt65xx.txt | 2 +
drivers/i2c/busses/i2c-mt65xx.c | 207 ++++++++++++++++--
2 files changed, 192 insertions(+), 17 deletions(-)
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 42+ messages in thread* [PATCH v6 1/7] i2c: mediatek: fixing the incorrect register offset
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-08-28 10:50 ` Kewei Xu
-1 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
The reason for the modification here is that the previous
offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
the correct value.
Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
---
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 4ca716e..2661ed0 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -193,7 +193,7 @@ enum I2C_REGS_OFFSET {
[OFFSET_CLOCK_DIV] = 0x48,
[OFFSET_SOFTRESET] = 0x50,
[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
- [OFFSET_DEBUGSTAT] = 0xe0,
+ [OFFSET_DEBUGSTAT] = 0xe4,
[OFFSET_DEBUGCTRL] = 0xe8,
[OFFSET_FIFO_STAT] = 0xf4,
[OFFSET_FIFO_THRESH] = 0xf8,
--
1.9.1
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 1/7] i2c: mediatek: fixing the incorrect register offset
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
The reason for the modification here is that the previous
offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
the correct value.
Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
---
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 4ca716e..2661ed0 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -193,7 +193,7 @@ enum I2C_REGS_OFFSET {
[OFFSET_CLOCK_DIV] = 0x48,
[OFFSET_SOFTRESET] = 0x50,
[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
- [OFFSET_DEBUGSTAT] = 0xe0,
+ [OFFSET_DEBUGSTAT] = 0xe4,
[OFFSET_DEBUGCTRL] = 0xe8,
[OFFSET_FIFO_STAT] = 0xf4,
[OFFSET_FIFO_THRESH] = 0xf8,
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 1/7] i2c: mediatek: fixing the incorrect register offset
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
The reason for the modification here is that the previous
offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
the correct value.
Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
---
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 4ca716e..2661ed0 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -193,7 +193,7 @@ enum I2C_REGS_OFFSET {
[OFFSET_CLOCK_DIV] = 0x48,
[OFFSET_SOFTRESET] = 0x50,
[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
- [OFFSET_DEBUGSTAT] = 0xe0,
+ [OFFSET_DEBUGSTAT] = 0xe4,
[OFFSET_DEBUGCTRL] = 0xe8,
[OFFSET_FIFO_STAT] = 0xf4,
[OFFSET_FIFO_THRESH] = 0xf8,
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH v6 1/7] i2c: mediatek: fixing the incorrect register offset
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-08-31 5:57 ` Qii Wang
-1 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-08-31 5:57 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> The reason for the modification here is that the previous
> offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
> the correct value.
>
> Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [PATCH v6 1/7] i2c: mediatek: fixing the incorrect register offset
@ 2021-08-31 5:57 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-08-31 5:57 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> The reason for the modification here is that the previous
> offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
> the correct value.
>
> Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [PATCH v6 1/7] i2c: mediatek: fixing the incorrect register offset
@ 2021-08-31 5:57 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-08-31 5:57 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> The reason for the modification here is that the previous
> offset information is incorrect, OFFSET_DEBUGSTAT = 0xE4 is
> the correct value.
>
> Fixes: 25708278f810 ("i2c: mediatek: Add i2c support for MediaTek MT8183")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v6 2/7] i2c: mediatek: Reset the handshake signal between i2c and dma
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-08-28 10:50 ` Kewei Xu
-1 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
Due to changes in the hardware design of the handshaking signal
between i2c and dma, it is necessary to reset the handshaking
signal before each transfer to ensure that the multi-msgs can
be transferred correctly.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2661ed0..7a1c538 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -47,6 +48,9 @@
#define I2C_RD_TRANAC_VALUE 0x0001
#define I2C_SCL_MIS_COMP_VALUE 0x0000
#define I2C_CHN_CLR_FLAG 0x0000
+#define I2C_CLR_DEBUGCTR 0x0000
+#define I2C_RELIABILITY 0x0010
+#define I2C_DMAACK_ENABLE 0x0008
#define I2C_DMA_CON_TX 0x0000
#define I2C_DMA_CON_RX 0x0001
@@ -842,6 +846,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
u16 restart_flag = 0;
u16 dma_sync = 0;
u32 reg_4g_mode;
+ u32 reg_dma_reset;
u8 *dma_rd_buf = NULL;
u8 *dma_wr_buf = NULL;
dma_addr_t rpaddr = 0;
@@ -855,6 +860,27 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
reinit_completion(&i2c->msg_complete);
+ if (i2c->dev_comp->apdma_sync && i2c->op != I2C_MASTER_WRRD && num > 1) {
+ mtk_i2c_writew(i2c, I2C_CLR_DEBUGCTR, OFFSET_DEBUGCTRL);
+ writel(I2C_DMA_HANDSHAKE_RST | I2C_DMA_WARM_RST,
+ i2c->pdmabase + OFFSET_RST);
+
+ ret = readw_poll_timeout(i2c->pdmabase + OFFSET_RST,
+ reg_dma_reset,
+ !(reg_dma_reset & I2C_DMA_WARM_RST),
+ 0, 100);
+ if (ret) {
+ dev_err(i2c->dev, "DMA warm reset timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
+ mtk_i2c_writew(i2c, I2C_HANDSHAKE_RST, OFFSET_SOFTRESET);
+ mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_SOFTRESET);
+ mtk_i2c_writew(i2c, I2C_RELIABILITY | I2C_DMAACK_ENABLE,
+ OFFSET_DEBUGCTRL);
+ }
+
control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
--
1.9.1
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 2/7] i2c: mediatek: Reset the handshake signal between i2c and dma
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
Due to changes in the hardware design of the handshaking signal
between i2c and dma, it is necessary to reset the handshaking
signal before each transfer to ensure that the multi-msgs can
be transferred correctly.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2661ed0..7a1c538 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -47,6 +48,9 @@
#define I2C_RD_TRANAC_VALUE 0x0001
#define I2C_SCL_MIS_COMP_VALUE 0x0000
#define I2C_CHN_CLR_FLAG 0x0000
+#define I2C_CLR_DEBUGCTR 0x0000
+#define I2C_RELIABILITY 0x0010
+#define I2C_DMAACK_ENABLE 0x0008
#define I2C_DMA_CON_TX 0x0000
#define I2C_DMA_CON_RX 0x0001
@@ -842,6 +846,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
u16 restart_flag = 0;
u16 dma_sync = 0;
u32 reg_4g_mode;
+ u32 reg_dma_reset;
u8 *dma_rd_buf = NULL;
u8 *dma_wr_buf = NULL;
dma_addr_t rpaddr = 0;
@@ -855,6 +860,27 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
reinit_completion(&i2c->msg_complete);
+ if (i2c->dev_comp->apdma_sync && i2c->op != I2C_MASTER_WRRD && num > 1) {
+ mtk_i2c_writew(i2c, I2C_CLR_DEBUGCTR, OFFSET_DEBUGCTRL);
+ writel(I2C_DMA_HANDSHAKE_RST | I2C_DMA_WARM_RST,
+ i2c->pdmabase + OFFSET_RST);
+
+ ret = readw_poll_timeout(i2c->pdmabase + OFFSET_RST,
+ reg_dma_reset,
+ !(reg_dma_reset & I2C_DMA_WARM_RST),
+ 0, 100);
+ if (ret) {
+ dev_err(i2c->dev, "DMA warm reset timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
+ mtk_i2c_writew(i2c, I2C_HANDSHAKE_RST, OFFSET_SOFTRESET);
+ mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_SOFTRESET);
+ mtk_i2c_writew(i2c, I2C_RELIABILITY | I2C_DMAACK_ENABLE,
+ OFFSET_DEBUGCTRL);
+ }
+
control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 2/7] i2c: mediatek: Reset the handshake signal between i2c and dma
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
Due to changes in the hardware design of the handshaking signal
between i2c and dma, it is necessary to reset the handshaking
signal before each transfer to ensure that the multi-msgs can
be transferred correctly.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2661ed0..7a1c538 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -47,6 +48,9 @@
#define I2C_RD_TRANAC_VALUE 0x0001
#define I2C_SCL_MIS_COMP_VALUE 0x0000
#define I2C_CHN_CLR_FLAG 0x0000
+#define I2C_CLR_DEBUGCTR 0x0000
+#define I2C_RELIABILITY 0x0010
+#define I2C_DMAACK_ENABLE 0x0008
#define I2C_DMA_CON_TX 0x0000
#define I2C_DMA_CON_RX 0x0001
@@ -842,6 +846,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
u16 restart_flag = 0;
u16 dma_sync = 0;
u32 reg_4g_mode;
+ u32 reg_dma_reset;
u8 *dma_rd_buf = NULL;
u8 *dma_wr_buf = NULL;
dma_addr_t rpaddr = 0;
@@ -855,6 +860,27 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
reinit_completion(&i2c->msg_complete);
+ if (i2c->dev_comp->apdma_sync && i2c->op != I2C_MASTER_WRRD && num > 1) {
+ mtk_i2c_writew(i2c, I2C_CLR_DEBUGCTR, OFFSET_DEBUGCTRL);
+ writel(I2C_DMA_HANDSHAKE_RST | I2C_DMA_WARM_RST,
+ i2c->pdmabase + OFFSET_RST);
+
+ ret = readw_poll_timeout(i2c->pdmabase + OFFSET_RST,
+ reg_dma_reset,
+ !(reg_dma_reset & I2C_DMA_WARM_RST),
+ 0, 100);
+ if (ret) {
+ dev_err(i2c->dev, "DMA warm reset timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
+ mtk_i2c_writew(i2c, I2C_HANDSHAKE_RST, OFFSET_SOFTRESET);
+ mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_SOFTRESET);
+ mtk_i2c_writew(i2c, I2C_RELIABILITY | I2C_DMAACK_ENABLE,
+ OFFSET_DEBUGCTRL);
+ }
+
control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH v6 2/7] i2c: mediatek: Reset the handshake signal between i2c and dma
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-09-01 9:30 ` Qii Wang
-1 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:30 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> Due to changes in the hardware design of the handshaking signal
> between i2c and dma, it is necessary to reset the handshaking
> signal before each transfer to ensure that the multi-msgs can
> be transferred correctly.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v6 2/7] i2c: mediatek: Reset the handshake signal between i2c and dma
@ 2021-09-01 9:30 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:30 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> Due to changes in the hardware design of the handshaking signal
> between i2c and dma, it is necessary to reset the handshaking
> signal before each transfer to ensure that the multi-msgs can
> be transferred correctly.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v6 2/7] i2c: mediatek: Reset the handshake signal between i2c and dma
@ 2021-09-01 9:30 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:30 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> Due to changes in the hardware design of the handshaking signal
> between i2c and dma, it is necessary to reset the handshaking
> signal before each transfer to ensure that the multi-msgs can
> be transferred correctly.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v6 3/7] i2c: mediatek: Dump i2c/dma register when a timeout occurs
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-08-28 10:50 ` Kewei Xu
-1 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
When a timeout error occurs in i2c transter, it is usually related
to the i2c/dma IP hardware configuration. Therefore, the purpose of
this patch is to dump the key register values of i2c/dma when a
timeout occurs in i2c for debugging.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 56 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 7a1c538..1aa0ba3 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -129,6 +129,7 @@ enum I2C_REGS_OFFSET {
OFFSET_HS,
OFFSET_SOFTRESET,
OFFSET_DCM_EN,
+ OFFSET_MULTI_DMA,
OFFSET_PATH_DIR,
OFFSET_DEBUGSTAT,
OFFSET_DEBUGCTRL,
@@ -196,6 +197,7 @@ enum I2C_REGS_OFFSET {
[OFFSET_TRANSFER_LEN_AUX] = 0x44,
[OFFSET_CLOCK_DIV] = 0x48,
[OFFSET_SOFTRESET] = 0x50,
+ [OFFSET_MULTI_DMA] = 0x8c,
[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
[OFFSET_DEBUGSTAT] = 0xe4,
[OFFSET_DEBUGCTRL] = 0xe8,
@@ -837,6 +839,57 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
return 0;
}
+static void i2c_dump_register(struct mtk_i2c *i2c)
+{
+ dev_err(i2c->dev, "SLAVE_ADDR: 0x%x, INTR_MASK: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_SLAVE_ADDR),
+ mtk_i2c_readw(i2c, OFFSET_INTR_MASK));
+ dev_err(i2c->dev, "INTR_STAT: 0x%x, CONTROL: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_INTR_STAT),
+ mtk_i2c_readw(i2c, OFFSET_CONTROL));
+ dev_err(i2c->dev, "TRANSFER_LEN: 0x%x, TRANSAC_LEN: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN),
+ mtk_i2c_readw(i2c, OFFSET_TRANSAC_LEN));
+ dev_err(i2c->dev, "DELAY_LEN: 0x%x, HTIMING: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DELAY_LEN),
+ mtk_i2c_readw(i2c, OFFSET_TIMING));
+ dev_err(i2c->dev, "START: 0x%x, EXT_CONF: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_START),
+ mtk_i2c_readw(i2c, OFFSET_EXT_CONF));
+ dev_err(i2c->dev, "HS: 0x%x, IO_CONFIG: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_HS),
+ mtk_i2c_readw(i2c, OFFSET_IO_CONFIG));
+ dev_err(i2c->dev, "DCM_EN: 0x%x, TRANSFER_LEN_AUX: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DCM_EN),
+ mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN_AUX));
+ dev_err(i2c->dev, "CLOCK_DIV: 0x%x, FIFO_STAT: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_CLOCK_DIV),
+ mtk_i2c_readw(i2c, OFFSET_FIFO_STAT));
+ dev_err(i2c->dev, "DEBUGCTRL : 0x%x, DEBUGSTAT: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DEBUGCTRL),
+ mtk_i2c_readw(i2c, OFFSET_DEBUGSTAT));
+ if (i2c->dev_comp->regs == mt_i2c_regs_v2) {
+ dev_err(i2c->dev, "LTIMING: 0x%x, MULTI_DMA: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_LTIMING),
+ mtk_i2c_readw(i2c, OFFSET_MULTI_DMA));
+ }
+ dev_err(i2c->dev, "\nDMA_INT_FLAG: 0x%x, DMA_INT_EN: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_INT_FLAG),
+ readl(i2c->pdmabase + OFFSET_INT_EN));
+ dev_err(i2c->dev, "DMA_EN: 0x%x, DMA_CON: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_EN),
+ readl(i2c->pdmabase + OFFSET_CON));
+ dev_err(i2c->dev, "DMA_TX_MEM_ADDR: 0x%x, DMA_RX_MEM_ADDR: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_MEM_ADDR),
+ readl(i2c->pdmabase + OFFSET_RX_MEM_ADDR));
+ dev_err(i2c->dev, "DMA_TX_LEN: 0x%x, DMA_RX_LEN: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_LEN),
+ readl(i2c->pdmabase + OFFSET_RX_LEN));
+ dev_err(i2c->dev, "DMA_TX_4G_MODE: 0x%x, DMA_RX_4G_MODE: 0x%x",
+ readl(i2c->pdmabase + OFFSET_TX_4G_MODE),
+ readl(i2c->pdmabase + OFFSET_RX_4G_MODE));
+}
+
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
@@ -1065,7 +1118,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
}
if (ret == 0) {
- dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+ dev_err(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+ i2c_dump_register(i2c);
mtk_i2c_init_hw(i2c);
return -ETIMEDOUT;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 3/7] i2c: mediatek: Dump i2c/dma register when a timeout occurs
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
When a timeout error occurs in i2c transter, it is usually related
to the i2c/dma IP hardware configuration. Therefore, the purpose of
this patch is to dump the key register values of i2c/dma when a
timeout occurs in i2c for debugging.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 56 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 7a1c538..1aa0ba3 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -129,6 +129,7 @@ enum I2C_REGS_OFFSET {
OFFSET_HS,
OFFSET_SOFTRESET,
OFFSET_DCM_EN,
+ OFFSET_MULTI_DMA,
OFFSET_PATH_DIR,
OFFSET_DEBUGSTAT,
OFFSET_DEBUGCTRL,
@@ -196,6 +197,7 @@ enum I2C_REGS_OFFSET {
[OFFSET_TRANSFER_LEN_AUX] = 0x44,
[OFFSET_CLOCK_DIV] = 0x48,
[OFFSET_SOFTRESET] = 0x50,
+ [OFFSET_MULTI_DMA] = 0x8c,
[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
[OFFSET_DEBUGSTAT] = 0xe4,
[OFFSET_DEBUGCTRL] = 0xe8,
@@ -837,6 +839,57 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
return 0;
}
+static void i2c_dump_register(struct mtk_i2c *i2c)
+{
+ dev_err(i2c->dev, "SLAVE_ADDR: 0x%x, INTR_MASK: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_SLAVE_ADDR),
+ mtk_i2c_readw(i2c, OFFSET_INTR_MASK));
+ dev_err(i2c->dev, "INTR_STAT: 0x%x, CONTROL: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_INTR_STAT),
+ mtk_i2c_readw(i2c, OFFSET_CONTROL));
+ dev_err(i2c->dev, "TRANSFER_LEN: 0x%x, TRANSAC_LEN: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN),
+ mtk_i2c_readw(i2c, OFFSET_TRANSAC_LEN));
+ dev_err(i2c->dev, "DELAY_LEN: 0x%x, HTIMING: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DELAY_LEN),
+ mtk_i2c_readw(i2c, OFFSET_TIMING));
+ dev_err(i2c->dev, "START: 0x%x, EXT_CONF: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_START),
+ mtk_i2c_readw(i2c, OFFSET_EXT_CONF));
+ dev_err(i2c->dev, "HS: 0x%x, IO_CONFIG: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_HS),
+ mtk_i2c_readw(i2c, OFFSET_IO_CONFIG));
+ dev_err(i2c->dev, "DCM_EN: 0x%x, TRANSFER_LEN_AUX: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DCM_EN),
+ mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN_AUX));
+ dev_err(i2c->dev, "CLOCK_DIV: 0x%x, FIFO_STAT: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_CLOCK_DIV),
+ mtk_i2c_readw(i2c, OFFSET_FIFO_STAT));
+ dev_err(i2c->dev, "DEBUGCTRL : 0x%x, DEBUGSTAT: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DEBUGCTRL),
+ mtk_i2c_readw(i2c, OFFSET_DEBUGSTAT));
+ if (i2c->dev_comp->regs == mt_i2c_regs_v2) {
+ dev_err(i2c->dev, "LTIMING: 0x%x, MULTI_DMA: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_LTIMING),
+ mtk_i2c_readw(i2c, OFFSET_MULTI_DMA));
+ }
+ dev_err(i2c->dev, "\nDMA_INT_FLAG: 0x%x, DMA_INT_EN: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_INT_FLAG),
+ readl(i2c->pdmabase + OFFSET_INT_EN));
+ dev_err(i2c->dev, "DMA_EN: 0x%x, DMA_CON: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_EN),
+ readl(i2c->pdmabase + OFFSET_CON));
+ dev_err(i2c->dev, "DMA_TX_MEM_ADDR: 0x%x, DMA_RX_MEM_ADDR: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_MEM_ADDR),
+ readl(i2c->pdmabase + OFFSET_RX_MEM_ADDR));
+ dev_err(i2c->dev, "DMA_TX_LEN: 0x%x, DMA_RX_LEN: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_LEN),
+ readl(i2c->pdmabase + OFFSET_RX_LEN));
+ dev_err(i2c->dev, "DMA_TX_4G_MODE: 0x%x, DMA_RX_4G_MODE: 0x%x",
+ readl(i2c->pdmabase + OFFSET_TX_4G_MODE),
+ readl(i2c->pdmabase + OFFSET_RX_4G_MODE));
+}
+
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
@@ -1065,7 +1118,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
}
if (ret == 0) {
- dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+ dev_err(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+ i2c_dump_register(i2c);
mtk_i2c_init_hw(i2c);
return -ETIMEDOUT;
}
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 3/7] i2c: mediatek: Dump i2c/dma register when a timeout occurs
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
When a timeout error occurs in i2c transter, it is usually related
to the i2c/dma IP hardware configuration. Therefore, the purpose of
this patch is to dump the key register values of i2c/dma when a
timeout occurs in i2c for debugging.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 56 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 7a1c538..1aa0ba3 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -129,6 +129,7 @@ enum I2C_REGS_OFFSET {
OFFSET_HS,
OFFSET_SOFTRESET,
OFFSET_DCM_EN,
+ OFFSET_MULTI_DMA,
OFFSET_PATH_DIR,
OFFSET_DEBUGSTAT,
OFFSET_DEBUGCTRL,
@@ -196,6 +197,7 @@ enum I2C_REGS_OFFSET {
[OFFSET_TRANSFER_LEN_AUX] = 0x44,
[OFFSET_CLOCK_DIV] = 0x48,
[OFFSET_SOFTRESET] = 0x50,
+ [OFFSET_MULTI_DMA] = 0x8c,
[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
[OFFSET_DEBUGSTAT] = 0xe4,
[OFFSET_DEBUGCTRL] = 0xe8,
@@ -837,6 +839,57 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
return 0;
}
+static void i2c_dump_register(struct mtk_i2c *i2c)
+{
+ dev_err(i2c->dev, "SLAVE_ADDR: 0x%x, INTR_MASK: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_SLAVE_ADDR),
+ mtk_i2c_readw(i2c, OFFSET_INTR_MASK));
+ dev_err(i2c->dev, "INTR_STAT: 0x%x, CONTROL: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_INTR_STAT),
+ mtk_i2c_readw(i2c, OFFSET_CONTROL));
+ dev_err(i2c->dev, "TRANSFER_LEN: 0x%x, TRANSAC_LEN: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN),
+ mtk_i2c_readw(i2c, OFFSET_TRANSAC_LEN));
+ dev_err(i2c->dev, "DELAY_LEN: 0x%x, HTIMING: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DELAY_LEN),
+ mtk_i2c_readw(i2c, OFFSET_TIMING));
+ dev_err(i2c->dev, "START: 0x%x, EXT_CONF: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_START),
+ mtk_i2c_readw(i2c, OFFSET_EXT_CONF));
+ dev_err(i2c->dev, "HS: 0x%x, IO_CONFIG: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_HS),
+ mtk_i2c_readw(i2c, OFFSET_IO_CONFIG));
+ dev_err(i2c->dev, "DCM_EN: 0x%x, TRANSFER_LEN_AUX: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DCM_EN),
+ mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN_AUX));
+ dev_err(i2c->dev, "CLOCK_DIV: 0x%x, FIFO_STAT: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_CLOCK_DIV),
+ mtk_i2c_readw(i2c, OFFSET_FIFO_STAT));
+ dev_err(i2c->dev, "DEBUGCTRL : 0x%x, DEBUGSTAT: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_DEBUGCTRL),
+ mtk_i2c_readw(i2c, OFFSET_DEBUGSTAT));
+ if (i2c->dev_comp->regs == mt_i2c_regs_v2) {
+ dev_err(i2c->dev, "LTIMING: 0x%x, MULTI_DMA: 0x%x\n",
+ mtk_i2c_readw(i2c, OFFSET_LTIMING),
+ mtk_i2c_readw(i2c, OFFSET_MULTI_DMA));
+ }
+ dev_err(i2c->dev, "\nDMA_INT_FLAG: 0x%x, DMA_INT_EN: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_INT_FLAG),
+ readl(i2c->pdmabase + OFFSET_INT_EN));
+ dev_err(i2c->dev, "DMA_EN: 0x%x, DMA_CON: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_EN),
+ readl(i2c->pdmabase + OFFSET_CON));
+ dev_err(i2c->dev, "DMA_TX_MEM_ADDR: 0x%x, DMA_RX_MEM_ADDR: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_MEM_ADDR),
+ readl(i2c->pdmabase + OFFSET_RX_MEM_ADDR));
+ dev_err(i2c->dev, "DMA_TX_LEN: 0x%x, DMA_RX_LEN: 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_LEN),
+ readl(i2c->pdmabase + OFFSET_RX_LEN));
+ dev_err(i2c->dev, "DMA_TX_4G_MODE: 0x%x, DMA_RX_4G_MODE: 0x%x",
+ readl(i2c->pdmabase + OFFSET_TX_4G_MODE),
+ readl(i2c->pdmabase + OFFSET_RX_4G_MODE));
+}
+
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
@@ -1065,7 +1118,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
}
if (ret == 0) {
- dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+ dev_err(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+ i2c_dump_register(i2c);
mtk_i2c_init_hw(i2c);
return -ETIMEDOUT;
}
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH v6 3/7] i2c: mediatek: Dump i2c/dma register when a timeout occurs
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-09-01 9:31 ` Qii Wang
-1 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:31 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> When a timeout error occurs in i2c transter, it is usually related
> to the i2c/dma IP hardware configuration. Therefore, the purpose of
> this patch is to dump the key register values of i2c/dma when a
> timeout occurs in i2c for debugging.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 56 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 55 insertions(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v6 3/7] i2c: mediatek: Dump i2c/dma register when a timeout occurs
@ 2021-09-01 9:31 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:31 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> When a timeout error occurs in i2c transter, it is usually related
> to the i2c/dma IP hardware configuration. Therefore, the purpose of
> this patch is to dump the key register values of i2c/dma when a
> timeout occurs in i2c for debugging.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 56 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 55 insertions(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v6 3/7] i2c: mediatek: Dump i2c/dma register when a timeout occurs
@ 2021-09-01 9:31 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:31 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> When a timeout error occurs in i2c transter, it is usually related
> to the i2c/dma IP hardware configuration. Therefore, the purpose of
> this patch is to dump the key register values of i2c/dma when a
> timeout occurs in i2c for debugging.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 56 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 55 insertions(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v6 4/7] dt-bindings: i2c: add attribute use-default-timing
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-08-28 10:50 ` Kewei Xu
-1 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
Add attribute use-default-timing for DT-binding document.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
index 5ea216a..4dbb697 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
@@ -34,6 +34,8 @@ Optional properties:
Only mt6589 and mt8135 support this feature.
- mediatek,use-push-pull: IO config use push-pull mode.
- vbus-supply: phandle to the regulator that provides power to SCL/SDA.
+ - mediatek,use-default-timing: use default timing calculation, no timing
+ adjustment.
Example:
--
1.9.1
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 4/7] dt-bindings: i2c: add attribute use-default-timing
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
Add attribute use-default-timing for DT-binding document.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
index 5ea216a..4dbb697 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
@@ -34,6 +34,8 @@ Optional properties:
Only mt6589 and mt8135 support this feature.
- mediatek,use-push-pull: IO config use push-pull mode.
- vbus-supply: phandle to the regulator that provides power to SCL/SDA.
+ - mediatek,use-default-timing: use default timing calculation, no timing
+ adjustment.
Example:
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 4/7] dt-bindings: i2c: add attribute use-default-timing
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
Add attribute use-default-timing for DT-binding document.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
index 5ea216a..4dbb697 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
@@ -34,6 +34,8 @@ Optional properties:
Only mt6589 and mt8135 support this feature.
- mediatek,use-push-pull: IO config use push-pull mode.
- vbus-supply: phandle to the regulator that provides power to SCL/SDA.
+ - mediatek,use-default-timing: use default timing calculation, no timing
+ adjustment.
Example:
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v6 5/7] i2c: mediatek: Add OFFSET_EXT_CONF setting back
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-08-28 10:50 ` Kewei Xu
-1 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
support"), we miss setting OFFSET_EXT_CONF register if
i2c->dev_comp->timing_adjust is false, now add it back.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1aa0ba3..6ded82e 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -42,6 +42,8 @@
#define I2C_HANDSHAKE_RST 0x0020
#define I2C_FIFO_ADDR_CLR 0x0001
#define I2C_DELAY_LEN 0x0002
+#define I2C_ST_START_CON 0x8001
+#define I2C_FS_START_CON 0x1800
#define I2C_TIME_CLR_VALUE 0x0000
#define I2C_TIME_DEFAULT_VALUE 0x0003
#define I2C_WRRD_TRANAC_VALUE 0x0002
@@ -486,6 +488,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
u16 intr_stat_reg;
+ u16 ext_conf_val;
mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START);
intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT);
@@ -524,8 +527,13 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
if (i2c->dev_comp->ltiming_adjust)
mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
+ if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ)
+ ext_conf_val = I2C_ST_START_CON;
+ else
+ ext_conf_val = I2C_FS_START_CON;
+
if (i2c->dev_comp->timing_adjust) {
- mtk_i2c_writew(i2c, i2c->ac_timing.ext, OFFSET_EXT_CONF);
+ ext_conf_val = i2c->ac_timing.ext;
mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div,
OFFSET_CLOCK_DIV);
mtk_i2c_writew(i2c, I2C_SCL_MIS_COMP_VALUE,
@@ -550,6 +558,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
OFFSET_HS_STA_STO_AC_TIMING);
}
}
+ mtk_i2c_writew(i2c, ext_conf_val, OFFSET_EXT_CONF);
/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
if (i2c->have_pmic)
--
1.9.1
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 5/7] i2c: mediatek: Add OFFSET_EXT_CONF setting back
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
support"), we miss setting OFFSET_EXT_CONF register if
i2c->dev_comp->timing_adjust is false, now add it back.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1aa0ba3..6ded82e 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -42,6 +42,8 @@
#define I2C_HANDSHAKE_RST 0x0020
#define I2C_FIFO_ADDR_CLR 0x0001
#define I2C_DELAY_LEN 0x0002
+#define I2C_ST_START_CON 0x8001
+#define I2C_FS_START_CON 0x1800
#define I2C_TIME_CLR_VALUE 0x0000
#define I2C_TIME_DEFAULT_VALUE 0x0003
#define I2C_WRRD_TRANAC_VALUE 0x0002
@@ -486,6 +488,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
u16 intr_stat_reg;
+ u16 ext_conf_val;
mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START);
intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT);
@@ -524,8 +527,13 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
if (i2c->dev_comp->ltiming_adjust)
mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
+ if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ)
+ ext_conf_val = I2C_ST_START_CON;
+ else
+ ext_conf_val = I2C_FS_START_CON;
+
if (i2c->dev_comp->timing_adjust) {
- mtk_i2c_writew(i2c, i2c->ac_timing.ext, OFFSET_EXT_CONF);
+ ext_conf_val = i2c->ac_timing.ext;
mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div,
OFFSET_CLOCK_DIV);
mtk_i2c_writew(i2c, I2C_SCL_MIS_COMP_VALUE,
@@ -550,6 +558,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
OFFSET_HS_STA_STO_AC_TIMING);
}
}
+ mtk_i2c_writew(i2c, ext_conf_val, OFFSET_EXT_CONF);
/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
if (i2c->have_pmic)
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 5/7] i2c: mediatek: Add OFFSET_EXT_CONF setting back
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
support"), we miss setting OFFSET_EXT_CONF register if
i2c->dev_comp->timing_adjust is false, now add it back.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1aa0ba3..6ded82e 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -42,6 +42,8 @@
#define I2C_HANDSHAKE_RST 0x0020
#define I2C_FIFO_ADDR_CLR 0x0001
#define I2C_DELAY_LEN 0x0002
+#define I2C_ST_START_CON 0x8001
+#define I2C_FS_START_CON 0x1800
#define I2C_TIME_CLR_VALUE 0x0000
#define I2C_TIME_DEFAULT_VALUE 0x0003
#define I2C_WRRD_TRANAC_VALUE 0x0002
@@ -486,6 +488,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
u16 intr_stat_reg;
+ u16 ext_conf_val;
mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START);
intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT);
@@ -524,8 +527,13 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
if (i2c->dev_comp->ltiming_adjust)
mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
+ if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ)
+ ext_conf_val = I2C_ST_START_CON;
+ else
+ ext_conf_val = I2C_FS_START_CON;
+
if (i2c->dev_comp->timing_adjust) {
- mtk_i2c_writew(i2c, i2c->ac_timing.ext, OFFSET_EXT_CONF);
+ ext_conf_val = i2c->ac_timing.ext;
mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div,
OFFSET_CLOCK_DIV);
mtk_i2c_writew(i2c, I2C_SCL_MIS_COMP_VALUE,
@@ -550,6 +558,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
OFFSET_HS_STA_STO_AC_TIMING);
}
}
+ mtk_i2c_writew(i2c, ext_conf_val, OFFSET_EXT_CONF);
/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
if (i2c->have_pmic)
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH v6 5/7] i2c: mediatek: Add OFFSET_EXT_CONF setting back
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-09-01 9:33 ` Qii Wang
-1 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:33 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
> support"), we miss setting OFFSET_EXT_CONF register if
> i2c->dev_comp->timing_adjust is false, now add it back.
>
> Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [PATCH v6 5/7] i2c: mediatek: Add OFFSET_EXT_CONF setting back
@ 2021-09-01 9:33 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:33 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
> support"), we miss setting OFFSET_EXT_CONF register if
> i2c->dev_comp->timing_adjust is false, now add it back.
>
> Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [PATCH v6 5/7] i2c: mediatek: Add OFFSET_EXT_CONF setting back
@ 2021-09-01 9:33 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:33 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
> support"), we miss setting OFFSET_EXT_CONF register if
> i2c->dev_comp->timing_adjust is false, now add it back.
>
> Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v6 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-08-28 10:50 ` Kewei Xu
-1 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
support"), the I2C timing calculation has been revised to support
ac-timing adjustment, however that will break on some I2C components.
As a result we want to introduce a new setting "default-adjust-timing"
so those components can choose to use the old (default) timing algorithm.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 77 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 73 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 6ded82e..0cf130b 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -66,6 +66,7 @@
#define I2C_DMA_HARD_RST 0x0002
#define I2C_DMA_HANDSHAKE_RST 0x0004
+#define I2C_DEFAULT_CLK_DIV 5
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
#define MAX_CLOCK_DIV 256
@@ -250,6 +251,7 @@ struct mtk_i2c {
struct clk *clk_arb; /* Arbitrator clock for i2c */
bool have_pmic; /* can use i2c pins from PMIC */
bool use_push_pull; /* IO config push-pull mode */
+ bool use_default_timing; /* no timing adjust mode */
u16 irq_stat; /* interrupt status */
unsigned int clk_src_div;
@@ -532,7 +534,11 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
else
ext_conf_val = I2C_FS_START_CON;
- if (i2c->dev_comp->timing_adjust) {
+ if (i2c->use_default_timing) {
+ if (i2c->dev_comp->timing_adjust)
+ mtk_i2c_writew(i2c, I2C_DEFAULT_CLK_DIV - 1,
+ OFFSET_CLOCK_DIV);
+ } else if (i2c->dev_comp->timing_adjust) {
ext_conf_val = i2c->ac_timing.ext;
mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div,
OFFSET_CLOCK_DIV);
@@ -615,7 +621,7 @@ static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
unsigned int sample_ns = div_u64(1000000000ULL * (sample_cnt + 1),
clk_src);
- if (!i2c->dev_comp->timing_adjust)
+ if (i2c->use_default_timing || !i2c->dev_comp->timing_adjust)
return 0;
if (i2c->dev_comp->ltiming_adjust)
@@ -775,7 +781,65 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
return 0;
}
-static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
+static int mtk_i2c_set_speed_default_timing(struct mtk_i2c *i2c,
+ unsigned int parent_clk)
+{
+ unsigned int clk_src;
+ unsigned int step_cnt;
+ unsigned int sample_cnt;
+ unsigned int l_step_cnt;
+ unsigned int l_sample_cnt;
+ unsigned int target_speed;
+ int ret;
+
+ if (i2c->dev_comp->timing_adjust)
+ i2c->clk_src_div *= I2C_DEFAULT_CLK_DIV;
+
+ clk_src = parent_clk / i2c->clk_src_div;
+ target_speed = i2c->speed_hz;
+
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
+ /* Set master code speed register */
+ ret = mtk_i2c_calculate_speed(i2c, clk_src,
+ I2C_MAX_FAST_MODE_FREQ,
+ &l_step_cnt, &l_sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
+
+ /* Set the high speed mode register */
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
+ (sample_cnt << 12) | (step_cnt << 8);
+
+ if (i2c->dev_comp->ltiming_adjust)
+ i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
+ (sample_cnt << 12) | (step_cnt << 9);
+ } else {
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+
+ /* Disable the high speed transaction */
+ i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
+
+ if (i2c->dev_comp->ltiming_adjust)
+ i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
+ }
+
+ return 0;
+}
+
+static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
+ unsigned int parent_clk)
{
unsigned int clk_src;
unsigned int step_cnt;
@@ -1271,6 +1335,8 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
i2c->use_push_pull =
of_property_read_bool(np, "mediatek,use-push-pull");
+ i2c->use_default_timing =
+ of_property_read_bool(np, "mediatek,use-default-timing");
i2c_parse_fw_timings(i2c->dev, &i2c->timing_info, true);
@@ -1357,7 +1423,10 @@ static int mtk_i2c_probe(struct platform_device *pdev)
strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
- ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk));
+ if (i2c->use_default_timing)
+ ret = mtk_i2c_set_speed_default_timing(i2c, clk_get_rate(clk));
+ else
+ ret = mtk_i2c_set_speed_adjust_timing(i2c, clk_get_rate(clk));
if (ret) {
dev_err(&pdev->dev, "Failed to set the speed.\n");
return -EINVAL;
--
1.9.1
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
support"), the I2C timing calculation has been revised to support
ac-timing adjustment, however that will break on some I2C components.
As a result we want to introduce a new setting "default-adjust-timing"
so those components can choose to use the old (default) timing algorithm.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 77 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 73 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 6ded82e..0cf130b 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -66,6 +66,7 @@
#define I2C_DMA_HARD_RST 0x0002
#define I2C_DMA_HANDSHAKE_RST 0x0004
+#define I2C_DEFAULT_CLK_DIV 5
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
#define MAX_CLOCK_DIV 256
@@ -250,6 +251,7 @@ struct mtk_i2c {
struct clk *clk_arb; /* Arbitrator clock for i2c */
bool have_pmic; /* can use i2c pins from PMIC */
bool use_push_pull; /* IO config push-pull mode */
+ bool use_default_timing; /* no timing adjust mode */
u16 irq_stat; /* interrupt status */
unsigned int clk_src_div;
@@ -532,7 +534,11 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
else
ext_conf_val = I2C_FS_START_CON;
- if (i2c->dev_comp->timing_adjust) {
+ if (i2c->use_default_timing) {
+ if (i2c->dev_comp->timing_adjust)
+ mtk_i2c_writew(i2c, I2C_DEFAULT_CLK_DIV - 1,
+ OFFSET_CLOCK_DIV);
+ } else if (i2c->dev_comp->timing_adjust) {
ext_conf_val = i2c->ac_timing.ext;
mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div,
OFFSET_CLOCK_DIV);
@@ -615,7 +621,7 @@ static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
unsigned int sample_ns = div_u64(1000000000ULL * (sample_cnt + 1),
clk_src);
- if (!i2c->dev_comp->timing_adjust)
+ if (i2c->use_default_timing || !i2c->dev_comp->timing_adjust)
return 0;
if (i2c->dev_comp->ltiming_adjust)
@@ -775,7 +781,65 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
return 0;
}
-static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
+static int mtk_i2c_set_speed_default_timing(struct mtk_i2c *i2c,
+ unsigned int parent_clk)
+{
+ unsigned int clk_src;
+ unsigned int step_cnt;
+ unsigned int sample_cnt;
+ unsigned int l_step_cnt;
+ unsigned int l_sample_cnt;
+ unsigned int target_speed;
+ int ret;
+
+ if (i2c->dev_comp->timing_adjust)
+ i2c->clk_src_div *= I2C_DEFAULT_CLK_DIV;
+
+ clk_src = parent_clk / i2c->clk_src_div;
+ target_speed = i2c->speed_hz;
+
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
+ /* Set master code speed register */
+ ret = mtk_i2c_calculate_speed(i2c, clk_src,
+ I2C_MAX_FAST_MODE_FREQ,
+ &l_step_cnt, &l_sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
+
+ /* Set the high speed mode register */
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
+ (sample_cnt << 12) | (step_cnt << 8);
+
+ if (i2c->dev_comp->ltiming_adjust)
+ i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
+ (sample_cnt << 12) | (step_cnt << 9);
+ } else {
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+
+ /* Disable the high speed transaction */
+ i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
+
+ if (i2c->dev_comp->ltiming_adjust)
+ i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
+ }
+
+ return 0;
+}
+
+static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
+ unsigned int parent_clk)
{
unsigned int clk_src;
unsigned int step_cnt;
@@ -1271,6 +1335,8 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
i2c->use_push_pull =
of_property_read_bool(np, "mediatek,use-push-pull");
+ i2c->use_default_timing =
+ of_property_read_bool(np, "mediatek,use-default-timing");
i2c_parse_fw_timings(i2c->dev, &i2c->timing_info, true);
@@ -1357,7 +1423,10 @@ static int mtk_i2c_probe(struct platform_device *pdev)
strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
- ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk));
+ if (i2c->use_default_timing)
+ ret = mtk_i2c_set_speed_default_timing(i2c, clk_get_rate(clk));
+ else
+ ret = mtk_i2c_set_speed_adjust_timing(i2c, clk_get_rate(clk));
if (ret) {
dev_err(&pdev->dev, "Failed to set the speed.\n");
return -EINVAL;
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
support"), the I2C timing calculation has been revised to support
ac-timing adjustment, however that will break on some I2C components.
As a result we want to introduce a new setting "default-adjust-timing"
so those components can choose to use the old (default) timing algorithm.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 77 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 73 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 6ded82e..0cf130b 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -66,6 +66,7 @@
#define I2C_DMA_HARD_RST 0x0002
#define I2C_DMA_HANDSHAKE_RST 0x0004
+#define I2C_DEFAULT_CLK_DIV 5
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
#define MAX_CLOCK_DIV 256
@@ -250,6 +251,7 @@ struct mtk_i2c {
struct clk *clk_arb; /* Arbitrator clock for i2c */
bool have_pmic; /* can use i2c pins from PMIC */
bool use_push_pull; /* IO config push-pull mode */
+ bool use_default_timing; /* no timing adjust mode */
u16 irq_stat; /* interrupt status */
unsigned int clk_src_div;
@@ -532,7 +534,11 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
else
ext_conf_val = I2C_FS_START_CON;
- if (i2c->dev_comp->timing_adjust) {
+ if (i2c->use_default_timing) {
+ if (i2c->dev_comp->timing_adjust)
+ mtk_i2c_writew(i2c, I2C_DEFAULT_CLK_DIV - 1,
+ OFFSET_CLOCK_DIV);
+ } else if (i2c->dev_comp->timing_adjust) {
ext_conf_val = i2c->ac_timing.ext;
mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div,
OFFSET_CLOCK_DIV);
@@ -615,7 +621,7 @@ static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
unsigned int sample_ns = div_u64(1000000000ULL * (sample_cnt + 1),
clk_src);
- if (!i2c->dev_comp->timing_adjust)
+ if (i2c->use_default_timing || !i2c->dev_comp->timing_adjust)
return 0;
if (i2c->dev_comp->ltiming_adjust)
@@ -775,7 +781,65 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
return 0;
}
-static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
+static int mtk_i2c_set_speed_default_timing(struct mtk_i2c *i2c,
+ unsigned int parent_clk)
+{
+ unsigned int clk_src;
+ unsigned int step_cnt;
+ unsigned int sample_cnt;
+ unsigned int l_step_cnt;
+ unsigned int l_sample_cnt;
+ unsigned int target_speed;
+ int ret;
+
+ if (i2c->dev_comp->timing_adjust)
+ i2c->clk_src_div *= I2C_DEFAULT_CLK_DIV;
+
+ clk_src = parent_clk / i2c->clk_src_div;
+ target_speed = i2c->speed_hz;
+
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
+ /* Set master code speed register */
+ ret = mtk_i2c_calculate_speed(i2c, clk_src,
+ I2C_MAX_FAST_MODE_FREQ,
+ &l_step_cnt, &l_sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
+
+ /* Set the high speed mode register */
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
+ (sample_cnt << 12) | (step_cnt << 8);
+
+ if (i2c->dev_comp->ltiming_adjust)
+ i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
+ (sample_cnt << 12) | (step_cnt << 9);
+ } else {
+ ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
+ &step_cnt, &sample_cnt);
+ if (ret < 0)
+ return ret;
+
+ i2c->timing_reg = (sample_cnt << 8) | step_cnt;
+
+ /* Disable the high speed transaction */
+ i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
+
+ if (i2c->dev_comp->ltiming_adjust)
+ i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
+ }
+
+ return 0;
+}
+
+static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
+ unsigned int parent_clk)
{
unsigned int clk_src;
unsigned int step_cnt;
@@ -1271,6 +1335,8 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
i2c->use_push_pull =
of_property_read_bool(np, "mediatek,use-push-pull");
+ i2c->use_default_timing =
+ of_property_read_bool(np, "mediatek,use-default-timing");
i2c_parse_fw_timings(i2c->dev, &i2c->timing_info, true);
@@ -1357,7 +1423,10 @@ static int mtk_i2c_probe(struct platform_device *pdev)
strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
- ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk));
+ if (i2c->use_default_timing)
+ ret = mtk_i2c_set_speed_default_timing(i2c, clk_get_rate(clk));
+ else
+ ret = mtk_i2c_set_speed_adjust_timing(i2c, clk_get_rate(clk));
if (ret) {
dev_err(&pdev->dev, "Failed to set the speed.\n");
return -EINVAL;
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH v6 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-09-01 9:34 ` Qii Wang
-1 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:34 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
> support"), the I2C timing calculation has been revised to support
> ac-timing adjustment, however that will break on some I2C components.
> As a result we want to introduce a new setting "default-adjust-timing"
> so those components can choose to use the old (default) timing algorithm.
>
> Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 77 ++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 73 insertions(+), 4 deletions(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [PATCH v6 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
@ 2021-09-01 9:34 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:34 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
> support"), the I2C timing calculation has been revised to support
> ac-timing adjustment, however that will break on some I2C components.
> As a result we want to introduce a new setting "default-adjust-timing"
> so those components can choose to use the old (default) timing algorithm.
>
> Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 77 ++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 73 insertions(+), 4 deletions(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [PATCH v6 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
@ 2021-09-01 9:34 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:34 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
> support"), the I2C timing calculation has been revised to support
> ac-timing adjustment, however that will break on some I2C components.
> As a result we want to introduce a new setting "default-adjust-timing"
> so those components can choose to use the old (default) timing algorithm.
>
> Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 77 ++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 73 insertions(+), 4 deletions(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v6 7/7] i2c: mediatek: modify bus speed calculation formula
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-08-28 10:50 ` Kewei Xu
-1 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
When clock-div is 0 or greater than 1, the bus speed
calculated by the old speed calculation formula will be
larger than the target speed. So we update the formula.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 0cf130b..b2dcdc3f 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -69,11 +69,12 @@
#define I2C_DEFAULT_CLK_DIV 5
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
-#define MAX_CLOCK_DIV 256
+#define MAX_CLOCK_DIV_8BITS 256
+#define MAX_CLOCK_DIV_5BITS 32
#define MAX_HS_STEP_CNT_DIV 8
-#define I2C_STANDARD_MODE_BUFFER (1000 / 2)
-#define I2C_FAST_MODE_BUFFER (300 / 2)
-#define I2C_FAST_MODE_PLUS_BUFFER (20 / 2)
+#define I2C_STANDARD_MODE_BUFFER (1000 / 3)
+#define I2C_FAST_MODE_BUFFER (300 / 3)
+#define I2C_FAST_MODE_PLUS_BUFFER (20 / 3)
#define I2C_CONTROL_RS (0x1 << 1)
#define I2C_CONTROL_DMA_EN (0x1 << 2)
@@ -725,14 +726,26 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
unsigned int best_mul;
unsigned int cnt_mul;
int ret = -EINVAL;
+ int clock_div_constraint = 0;
if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ)
target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ;
+ if (i2c->use_default_timing) {
+ clock_div_constraint = 0;
+ } else if (i2c->dev_comp->ltiming_adjust &&
+ i2c->ac_timing.inter_clk_div > 1) {
+ clock_div_constraint = 1;
+ } else if (i2c->dev_comp->ltiming_adjust &&
+ i2c->ac_timing.inter_clk_div == 0) {
+ clock_div_constraint = -1;
+ }
+
max_step_cnt = mtk_i2c_max_step_cnt(target_speed);
base_step_cnt = max_step_cnt;
/* Find the best combination */
- opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed);
+ opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed) +
+ clock_div_constraint;
best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt;
/* Search for the best pair (sample_cnt, step_cnt) with
@@ -767,7 +780,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
sample_cnt = base_sample_cnt;
step_cnt = base_step_cnt;
- if ((clk_src / (2 * sample_cnt * step_cnt)) > target_speed) {
+ if ((clk_src / (2 * (sample_cnt * step_cnt - clock_div_constraint))) >
+ target_speed) {
/* In this case, hardware can't support such
* low i2c_bus_freq
*/
@@ -854,13 +868,16 @@ static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
target_speed = i2c->speed_hz;
parent_clk /= i2c->clk_src_div;
- if (i2c->dev_comp->timing_adjust)
- max_clk_div = MAX_CLOCK_DIV;
+ if (i2c->dev_comp->timing_adjust && i2c->dev_comp->ltiming_adjust)
+ max_clk_div = MAX_CLOCK_DIV_5BITS;
+ else if (i2c->dev_comp->timing_adjust)
+ max_clk_div = MAX_CLOCK_DIV_8BITS;
else
max_clk_div = 1;
for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
clk_src = parent_clk / clk_div;
+ i2c->ac_timing.inter_clk_div = clk_div - 1;
if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
/* Set master code speed register */
@@ -907,8 +924,6 @@ static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
break;
}
- i2c->ac_timing.inter_clk_div = clk_div - 1;
-
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 7/7] i2c: mediatek: modify bus speed calculation formula
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
When clock-div is 0 or greater than 1, the bus speed
calculated by the old speed calculation formula will be
larger than the target speed. So we update the formula.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 0cf130b..b2dcdc3f 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -69,11 +69,12 @@
#define I2C_DEFAULT_CLK_DIV 5
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
-#define MAX_CLOCK_DIV 256
+#define MAX_CLOCK_DIV_8BITS 256
+#define MAX_CLOCK_DIV_5BITS 32
#define MAX_HS_STEP_CNT_DIV 8
-#define I2C_STANDARD_MODE_BUFFER (1000 / 2)
-#define I2C_FAST_MODE_BUFFER (300 / 2)
-#define I2C_FAST_MODE_PLUS_BUFFER (20 / 2)
+#define I2C_STANDARD_MODE_BUFFER (1000 / 3)
+#define I2C_FAST_MODE_BUFFER (300 / 3)
+#define I2C_FAST_MODE_PLUS_BUFFER (20 / 3)
#define I2C_CONTROL_RS (0x1 << 1)
#define I2C_CONTROL_DMA_EN (0x1 << 2)
@@ -725,14 +726,26 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
unsigned int best_mul;
unsigned int cnt_mul;
int ret = -EINVAL;
+ int clock_div_constraint = 0;
if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ)
target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ;
+ if (i2c->use_default_timing) {
+ clock_div_constraint = 0;
+ } else if (i2c->dev_comp->ltiming_adjust &&
+ i2c->ac_timing.inter_clk_div > 1) {
+ clock_div_constraint = 1;
+ } else if (i2c->dev_comp->ltiming_adjust &&
+ i2c->ac_timing.inter_clk_div == 0) {
+ clock_div_constraint = -1;
+ }
+
max_step_cnt = mtk_i2c_max_step_cnt(target_speed);
base_step_cnt = max_step_cnt;
/* Find the best combination */
- opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed);
+ opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed) +
+ clock_div_constraint;
best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt;
/* Search for the best pair (sample_cnt, step_cnt) with
@@ -767,7 +780,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
sample_cnt = base_sample_cnt;
step_cnt = base_step_cnt;
- if ((clk_src / (2 * sample_cnt * step_cnt)) > target_speed) {
+ if ((clk_src / (2 * (sample_cnt * step_cnt - clock_div_constraint))) >
+ target_speed) {
/* In this case, hardware can't support such
* low i2c_bus_freq
*/
@@ -854,13 +868,16 @@ static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
target_speed = i2c->speed_hz;
parent_clk /= i2c->clk_src_div;
- if (i2c->dev_comp->timing_adjust)
- max_clk_div = MAX_CLOCK_DIV;
+ if (i2c->dev_comp->timing_adjust && i2c->dev_comp->ltiming_adjust)
+ max_clk_div = MAX_CLOCK_DIV_5BITS;
+ else if (i2c->dev_comp->timing_adjust)
+ max_clk_div = MAX_CLOCK_DIV_8BITS;
else
max_clk_div = 1;
for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
clk_src = parent_clk / clk_div;
+ i2c->ac_timing.inter_clk_div = clk_div - 1;
if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
/* Set master code speed register */
@@ -907,8 +924,6 @@ static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
break;
}
- i2c->ac_timing.inter_clk_div = clk_div - 1;
-
return 0;
}
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH v6 7/7] i2c: mediatek: modify bus speed calculation formula
@ 2021-08-28 10:50 ` Kewei Xu
0 siblings, 0 replies; 42+ messages in thread
From: Kewei Xu @ 2021-08-28 10:50 UTC (permalink / raw)
To: wsa
Cc: matthias.bgg, robh+dt, linux-i2c, devicetree, linux-arm-kernel,
linux-kernel, linux-mediatek, srv_heupstream, leilk.liu,
qii.wang, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei,
kewei.xu
When clock-div is 0 or greater than 1, the bus speed
calculated by the old speed calculation formula will be
larger than the target speed. So we update the formula.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 0cf130b..b2dcdc3f 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -69,11 +69,12 @@
#define I2C_DEFAULT_CLK_DIV 5
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
-#define MAX_CLOCK_DIV 256
+#define MAX_CLOCK_DIV_8BITS 256
+#define MAX_CLOCK_DIV_5BITS 32
#define MAX_HS_STEP_CNT_DIV 8
-#define I2C_STANDARD_MODE_BUFFER (1000 / 2)
-#define I2C_FAST_MODE_BUFFER (300 / 2)
-#define I2C_FAST_MODE_PLUS_BUFFER (20 / 2)
+#define I2C_STANDARD_MODE_BUFFER (1000 / 3)
+#define I2C_FAST_MODE_BUFFER (300 / 3)
+#define I2C_FAST_MODE_PLUS_BUFFER (20 / 3)
#define I2C_CONTROL_RS (0x1 << 1)
#define I2C_CONTROL_DMA_EN (0x1 << 2)
@@ -725,14 +726,26 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
unsigned int best_mul;
unsigned int cnt_mul;
int ret = -EINVAL;
+ int clock_div_constraint = 0;
if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ)
target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ;
+ if (i2c->use_default_timing) {
+ clock_div_constraint = 0;
+ } else if (i2c->dev_comp->ltiming_adjust &&
+ i2c->ac_timing.inter_clk_div > 1) {
+ clock_div_constraint = 1;
+ } else if (i2c->dev_comp->ltiming_adjust &&
+ i2c->ac_timing.inter_clk_div == 0) {
+ clock_div_constraint = -1;
+ }
+
max_step_cnt = mtk_i2c_max_step_cnt(target_speed);
base_step_cnt = max_step_cnt;
/* Find the best combination */
- opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed);
+ opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed) +
+ clock_div_constraint;
best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt;
/* Search for the best pair (sample_cnt, step_cnt) with
@@ -767,7 +780,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
sample_cnt = base_sample_cnt;
step_cnt = base_step_cnt;
- if ((clk_src / (2 * sample_cnt * step_cnt)) > target_speed) {
+ if ((clk_src / (2 * (sample_cnt * step_cnt - clock_div_constraint))) >
+ target_speed) {
/* In this case, hardware can't support such
* low i2c_bus_freq
*/
@@ -854,13 +868,16 @@ static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
target_speed = i2c->speed_hz;
parent_clk /= i2c->clk_src_div;
- if (i2c->dev_comp->timing_adjust)
- max_clk_div = MAX_CLOCK_DIV;
+ if (i2c->dev_comp->timing_adjust && i2c->dev_comp->ltiming_adjust)
+ max_clk_div = MAX_CLOCK_DIV_5BITS;
+ else if (i2c->dev_comp->timing_adjust)
+ max_clk_div = MAX_CLOCK_DIV_8BITS;
else
max_clk_div = 1;
for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
clk_src = parent_clk / clk_div;
+ i2c->ac_timing.inter_clk_div = clk_div - 1;
if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
/* Set master code speed register */
@@ -907,8 +924,6 @@ static int mtk_i2c_set_speed_adjust_timing(struct mtk_i2c *i2c,
break;
}
- i2c->ac_timing.inter_clk_div = clk_div - 1;
-
return 0;
}
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH v6 7/7] i2c: mediatek: modify bus speed calculation formula
2021-08-28 10:50 ` Kewei Xu
(?)
@ 2021-09-01 9:35 ` Qii Wang
-1 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:35 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> When clock-div is 0 or greater than 1, the bus speed
> calculated by the old speed calculation formula will be
> larger than the target speed. So we update the formula.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 35 +++++++++++++++++++++++++----------
> 1 file changed, 25 insertions(+), 10 deletions(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v6 7/7] i2c: mediatek: modify bus speed calculation formula
@ 2021-09-01 9:35 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:35 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> When clock-div is 0 or greater than 1, the bus speed
> calculated by the old speed calculation formula will be
> larger than the target speed. So we update the formula.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 35 +++++++++++++++++++++++++----------
> 1 file changed, 25 insertions(+), 10 deletions(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v6 7/7] i2c: mediatek: modify bus speed calculation formula
@ 2021-09-01 9:35 ` Qii Wang
0 siblings, 0 replies; 42+ messages in thread
From: Qii Wang @ 2021-09-01 9:35 UTC (permalink / raw)
To: Kewei Xu
Cc: wsa, matthias.bgg, robh+dt, linux-i2c, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, srv_heupstream,
leilk.liu, liguo.zhang, caiyu.chen, ot_daolong.zhu, yuhan.wei
On Sat, 2021-08-28 at 18:50 +0800, Kewei Xu wrote:
> When clock-div is 0 or greater than 1, the bus speed
> calculated by the old speed calculation formula will be
> larger than the target speed. So we update the formula.
>
> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 35 +++++++++++++++++++++++++----------
> 1 file changed, 25 insertions(+), 10 deletions(-)
>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 42+ messages in thread