All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, robh+dt@kernel.org, will@kernel.org,
	saiprakash.ranjan@codeaurora.org, swboyd@chromium.org,
	mka@chromium.org
Cc: ohad@wizery.com, agross@kernel.org, mathieu.poirier@linaro.org,
	robin.murphy@arm.com, joro@8bytes.org, p.zabel@pengutronix.de,
	linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, evgreen@chromium.org,
	dianders@chromium.org, Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH v5 05/10] remoteproc: mss: q6v5-mss: Add modem support on SC7280
Date: Fri, 17 Sep 2021 19:25:30 +0530	[thread overview]
Message-ID: <1631886935-14691-6-git-send-email-sibis@codeaurora.org> (raw)
In-Reply-To: <1631886935-14691-1-git-send-email-sibis@codeaurora.org>

Add out of reset sequence support for modem sub-system on SC7280 SoCs.
It requires access to an additional set of qaccept registers, external
power/clk control registers and halt vq6 register to put the modem back
into reset.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
v5:
 * Add pka to the clock list to boot secure modem devices.

 drivers/remoteproc/qcom_q6v5_mss.c | 253 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 249 insertions(+), 4 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 7a1422bd7925..ec0701126ab3 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -77,6 +77,14 @@
 
 #define HALT_ACK_TIMEOUT_US		100000
 
+/* QACCEPT Register Offsets */
+#define QACCEPT_ACCEPT_REG		0x0
+#define QACCEPT_ACTIVE_REG		0x4
+#define QACCEPT_DENY_REG		0x8
+#define QACCEPT_REQ_REG			0xC
+
+#define QACCEPT_TIMEOUT_US		50
+
 /* QDSP6SS_RESET */
 #define Q6SS_STOP_CORE			BIT(0)
 #define Q6SS_CORE_ARES			BIT(1)
@@ -143,6 +151,9 @@ struct rproc_hexagon_res {
 	bool has_alt_reset;
 	bool has_mba_logs;
 	bool has_spare_reg;
+	bool has_qaccept_regs;
+	bool has_ext_cntl_regs;
+	bool has_vq6;
 };
 
 struct q6v5 {
@@ -158,8 +169,18 @@ struct q6v5 {
 	u32 halt_q6;
 	u32 halt_modem;
 	u32 halt_nc;
+	u32 halt_vq6;
 	u32 conn_box;
 
+	u32 qaccept_mdm;
+	u32 qaccept_cx;
+	u32 qaccept_axi;
+
+	u32 axim1_clk_off;
+	u32 crypto_clk_off;
+	u32 force_clk_on;
+	u32 rscc_disable;
+
 	struct reset_control *mss_restart;
 	struct reset_control *pdc_reset;
 
@@ -201,6 +222,9 @@ struct q6v5 {
 	bool has_alt_reset;
 	bool has_mba_logs;
 	bool has_spare_reg;
+	bool has_qaccept_regs;
+	bool has_ext_cntl_regs;
+	bool has_vq6;
 	int mpss_perm;
 	int mba_perm;
 	const char *hexagon_mdt_image;
@@ -213,6 +237,7 @@ enum {
 	MSS_MSM8996,
 	MSS_MSM8998,
 	MSS_SC7180,
+	MSS_SC7280,
 	MSS_SDM845,
 };
 
@@ -473,6 +498,12 @@ static int q6v5_reset_assert(struct q6v5 *qproc)
 		regmap_update_bits(qproc->conn_map, qproc->conn_box,
 				   AXI_GATING_VALID_OVERRIDE, 0);
 		ret = reset_control_deassert(qproc->mss_restart);
+	} else if (qproc->has_ext_cntl_regs) {
+		regmap_write(qproc->conn_map, qproc->rscc_disable, 0);
+		reset_control_assert(qproc->pdc_reset);
+		reset_control_assert(qproc->mss_restart);
+		reset_control_deassert(qproc->pdc_reset);
+		ret = reset_control_deassert(qproc->mss_restart);
 	} else {
 		ret = reset_control_assert(qproc->mss_restart);
 	}
@@ -490,7 +521,7 @@ static int q6v5_reset_deassert(struct q6v5 *qproc)
 		ret = reset_control_reset(qproc->mss_restart);
 		writel(0, qproc->rmb_base + RMB_MBA_ALT_RESET);
 		reset_control_deassert(qproc->pdc_reset);
-	} else if (qproc->has_spare_reg) {
+	} else if (qproc->has_spare_reg || qproc->has_ext_cntl_regs) {
 		ret = reset_control_reset(qproc->mss_restart);
 	} else {
 		ret = reset_control_deassert(qproc->mss_restart);
@@ -604,7 +635,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 		}
 
 		goto pbl_wait;
-	} else if (qproc->version == MSS_SC7180) {
+	} else if (qproc->version == MSS_SC7180 || qproc->version == MSS_SC7280) {
 		val = readl(qproc->reg_base + QDSP6SS_SLEEP);
 		val |= Q6SS_CBCR_CLKEN;
 		writel(val, qproc->reg_base + QDSP6SS_SLEEP);
@@ -787,6 +818,89 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 	return ret;
 }
 
+static int q6v5proc_enable_qchannel(struct q6v5 *qproc, struct regmap *map, u32 offset)
+{
+	unsigned int val;
+	int ret;
+
+	if (!qproc->has_qaccept_regs)
+		return 0;
+
+	if (qproc->has_ext_cntl_regs) {
+		regmap_write(qproc->conn_map, qproc->rscc_disable, 0);
+		regmap_write(qproc->conn_map, qproc->force_clk_on, 1);
+
+		ret = regmap_read_poll_timeout(qproc->halt_map, qproc->axim1_clk_off, val,
+					       !val, 1, Q6SS_CBCR_TIMEOUT_US);
+		if (ret) {
+			dev_err(qproc->dev, "failed to enable axim1 clock\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	regmap_write(map, offset + QACCEPT_REQ_REG, 1);
+
+	/* Wait for accept */
+	ret = regmap_read_poll_timeout(map, offset + QACCEPT_ACCEPT_REG, val, val, 5,
+				       QACCEPT_TIMEOUT_US);
+	if (ret) {
+		dev_err(qproc->dev, "qchannel enable failed\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void q6v5proc_disable_qchannel(struct q6v5 *qproc, struct regmap *map, u32 offset)
+{
+	int ret;
+	unsigned int val, retry;
+	unsigned int nretry = 10;
+	bool takedown_complete = false;
+
+	if (!qproc->has_qaccept_regs)
+		return;
+
+	while (!takedown_complete && nretry) {
+		nretry--;
+
+		/* Wait for active transactions to complete */
+		regmap_read_poll_timeout(map, offset + QACCEPT_ACTIVE_REG, val, !val, 5,
+					 QACCEPT_TIMEOUT_US);
+
+		/* Request Q-channel transaction takedown */
+		regmap_write(map, offset + QACCEPT_REQ_REG, 0);
+
+		/*
+		 * If the request is denied, reset the Q-channel takedown request,
+		 * wait for active transactions to complete and retry takedown.
+		 */
+		retry = 10;
+		while (retry) {
+			usleep_range(5, 10);
+			retry--;
+			ret = regmap_read(map, offset + QACCEPT_DENY_REG, &val);
+			if (!ret && val) {
+				regmap_write(map, offset + QACCEPT_REQ_REG, 1);
+				break;
+			}
+
+			ret = regmap_read(map, offset + QACCEPT_ACCEPT_REG, &val);
+			if (!ret && !val) {
+				takedown_complete = true;
+				break;
+			}
+		}
+
+		if (!retry)
+			break;
+	}
+
+	/* Rely on mss_restart to clear out pending transactions on takedown failure */
+	if (!takedown_complete)
+		dev_err(qproc->dev, "qchannel takedown failed\n");
+}
+
 static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
 				   struct regmap *halt_map,
 				   u32 offset)
@@ -950,6 +1064,12 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 		goto assert_reset;
 	}
 
+	ret = q6v5proc_enable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi);
+	if (ret) {
+		dev_err(qproc->dev, "failed to enable axi bridge\n");
+		goto disable_active_clks;
+	}
+
 	/*
 	 * Some versions of the MBA firmware will upon boot wipe the MPSS region as well, so provide
 	 * the Q6 access to this region.
@@ -996,8 +1116,13 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 
 halt_axi_ports:
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
+	if (qproc->has_vq6)
+		q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_vq6);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
+	q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_mdm);
+	q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_cx);
+	q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi);
 	mba_load_err = true;
 reclaim_mba:
 	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
@@ -1047,6 +1172,8 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 	qproc->dp_size = 0;
 
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
+	if (qproc->has_vq6)
+		q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_vq6);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
 	if (qproc->version == MSS_MSM8996) {
@@ -1059,6 +1186,24 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 	}
 
+	if (qproc->has_ext_cntl_regs) {
+		regmap_write(qproc->conn_map, qproc->rscc_disable, 1);
+
+		ret = regmap_read_poll_timeout(qproc->halt_map, qproc->axim1_clk_off, val,
+					       !val, 1, Q6SS_CBCR_TIMEOUT_US);
+		if (ret)
+			dev_err(qproc->dev, "failed to enable axim1 clock\n");
+
+		ret = regmap_read_poll_timeout(qproc->halt_map, qproc->crypto_clk_off, val,
+					       !val, 1, Q6SS_CBCR_TIMEOUT_US);
+		if (ret)
+			dev_err(qproc->dev, "failed to enable crypto clock\n");
+	}
+
+	q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_mdm);
+	q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_cx);
+	q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi);
+
 	q6v5_reset_assert(qproc);
 
 	q6v5_clk_disable(qproc->dev, qproc->reset_clks,
@@ -1471,6 +1616,7 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
 {
 	struct of_phandle_args args;
 	struct resource *res;
+	int halt_cell_cnt = 3;
 	int ret;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qdsp6");
@@ -1483,8 +1629,11 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
 	if (IS_ERR(qproc->rmb_base))
 		return PTR_ERR(qproc->rmb_base);
 
+	if (qproc->has_vq6)
+		halt_cell_cnt++;
+
 	ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
-					       "qcom,halt-regs", 3, 0, &args);
+					       "qcom,halt-regs", halt_cell_cnt, 0, &args);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n");
 		return -EINVAL;
@@ -1499,6 +1648,52 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
 	qproc->halt_modem = args.args[1];
 	qproc->halt_nc = args.args[2];
 
+	if (qproc->has_vq6)
+		qproc->halt_vq6 = args.args[3];
+
+	if (qproc->has_qaccept_regs) {
+		ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+						       "qcom,qaccept-regs",
+						       3, 0, &args);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to parse qaccept-regs\n");
+			return -EINVAL;
+		}
+
+		qproc->qaccept_mdm = args.args[0];
+		qproc->qaccept_cx = args.args[1];
+		qproc->qaccept_axi = args.args[2];
+	}
+
+	if (qproc->has_ext_cntl_regs) {
+		ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+						       "qcom,ext-regs",
+						       2, 0, &args);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to parse ext-regs index 0\n");
+			return -EINVAL;
+		}
+
+		qproc->conn_map = syscon_node_to_regmap(args.np);
+		of_node_put(args.np);
+		if (IS_ERR(qproc->conn_map))
+			return PTR_ERR(qproc->conn_map);
+
+		qproc->force_clk_on = args.args[0];
+		qproc->rscc_disable = args.args[1];
+
+		ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+						       "qcom,ext-regs",
+						       2, 1, &args);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to parse ext-regs index 1\n");
+			return -EINVAL;
+		}
+
+		qproc->axim1_clk_off = args.args[0];
+		qproc->crypto_clk_off = args.args[1];
+	}
+
 	if (qproc->has_spare_reg) {
 		ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
 						       "qcom,spare-regs",
@@ -1590,7 +1785,7 @@ static int q6v5_init_reset(struct q6v5 *qproc)
 		return PTR_ERR(qproc->mss_restart);
 	}
 
-	if (qproc->has_alt_reset || qproc->has_spare_reg) {
+	if (qproc->has_alt_reset || qproc->has_spare_reg || qproc->has_ext_cntl_regs) {
 		qproc->pdc_reset = devm_reset_control_get_exclusive(qproc->dev,
 								    "pdc_reset");
 		if (IS_ERR(qproc->pdc_reset)) {
@@ -1697,6 +1892,9 @@ static int q6v5_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, qproc);
 
+	qproc->has_qaccept_regs = desc->has_qaccept_regs;
+	qproc->has_ext_cntl_regs = desc->has_ext_cntl_regs;
+	qproc->has_vq6 = desc->has_vq6;
 	qproc->has_spare_reg = desc->has_spare_reg;
 	ret = q6v5_init_mem(qproc, pdev);
 	if (ret)
@@ -1857,9 +2055,40 @@ static const struct rproc_hexagon_res sc7180_mss = {
 	.has_alt_reset = false,
 	.has_mba_logs = true,
 	.has_spare_reg = true,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
 	.version = MSS_SC7180,
 };
 
+static const struct rproc_hexagon_res sc7280_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_clk_names = (char*[]){
+		"xo",
+		"pka",
+		NULL
+	},
+	.active_clk_names = (char*[]){
+		"iface",
+		"offline",
+		"snoc_axi",
+		NULL
+	},
+	.proxy_pd_names = (char*[]){
+		"cx",
+		"mss",
+		NULL
+	},
+	.need_mem_protection = true,
+	.has_alt_reset = false,
+	.has_mba_logs = true,
+	.has_spare_reg = false,
+	.has_qaccept_regs = true,
+	.has_ext_cntl_regs = true,
+	.has_vq6 = true,
+	.version = MSS_SC7280,
+};
+
 static const struct rproc_hexagon_res sdm845_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_clk_names = (char*[]){
@@ -1889,6 +2118,9 @@ static const struct rproc_hexagon_res sdm845_mss = {
 	.has_alt_reset = true,
 	.has_mba_logs = false,
 	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
 	.version = MSS_SDM845,
 };
 
@@ -1917,6 +2149,9 @@ static const struct rproc_hexagon_res msm8998_mss = {
 	.has_alt_reset = false,
 	.has_mba_logs = false,
 	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
 	.version = MSS_MSM8998,
 };
 
@@ -1948,6 +2183,9 @@ static const struct rproc_hexagon_res msm8996_mss = {
 	.has_alt_reset = false,
 	.has_mba_logs = false,
 	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
 	.version = MSS_MSM8996,
 };
 
@@ -1990,6 +2228,9 @@ static const struct rproc_hexagon_res msm8916_mss = {
 	.has_alt_reset = false,
 	.has_mba_logs = false,
 	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
 	.version = MSS_MSM8916,
 };
 
@@ -2040,6 +2281,9 @@ static const struct rproc_hexagon_res msm8974_mss = {
 	.has_alt_reset = false,
 	.has_mba_logs = false,
 	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
 	.version = MSS_MSM8974,
 };
 
@@ -2050,6 +2294,7 @@ static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
 	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
 	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
+	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
 	{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
 	{ },
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2021-09-17 13:57 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-17 13:55 [PATCH v5 00/10] Add Modem support on SC7280 SoCs Sibi Sankar
2021-09-17 13:55 ` [PATCH v5 01/10] dt-bindings: remoteproc: qcom: pas: Add SC7280 MPSS support Sibi Sankar
2021-09-27 23:13   ` (subset) " Bjorn Andersson
2021-09-27 23:13     ` Bjorn Andersson
2021-09-17 13:55 ` [PATCH v5 02/10] remoteproc: qcom: pas: Add SC7280 Modem support Sibi Sankar
2021-09-27 23:13   ` (subset) " Bjorn Andersson
2021-09-27 23:13     ` Bjorn Andersson
2021-09-17 13:55 ` [PATCH v5 03/10] dt-bindings: remoteproc: qcom: Update Q6V5 Modem PIL binding Sibi Sankar
2021-09-27 23:13   ` (subset) " Bjorn Andersson
2021-09-27 23:13     ` Bjorn Andersson
2021-09-17 13:55 ` [PATCH v5 04/10] iommu/arm-smmu-qcom: Request direct mapping for modem device Sibi Sankar
2021-10-07 20:08   ` Sibi Sankar
2021-09-17 13:55 ` Sibi Sankar [this message]
2021-09-27 23:13   ` (subset) [PATCH v5 05/10] remoteproc: mss: q6v5-mss: Add modem support on SC7280 Bjorn Andersson
2021-09-27 23:13     ` Bjorn Andersson
2021-09-17 13:55 ` [PATCH v5 06/10] arm64: dts: qcom: sc7280: Update reserved memory map Sibi Sankar
2021-09-17 13:55 ` [PATCH v5 07/10] arm64: dts: qcom: sc7280: Add/Delete/Update reserved memory nodes Sibi Sankar
2021-09-17 13:55 ` [PATCH v5 08/10] arm64: dts: qcom: sc7280: Add nodes to boot modem Sibi Sankar
2021-09-17 13:55 ` [PATCH v5 09/10] arm64: dts: qcom: sc7280: Add Q6V5 MSS node Sibi Sankar
2021-09-17 13:55 ` [PATCH v5 10/10] arm64: dts: qcom: sc7280: Update " Sibi Sankar
2021-09-27 22:56 ` (subset) [PATCH v5 00/10] Add Modem support on SC7280 SoCs Bjorn Andersson
2021-09-27 22:56   ` Bjorn Andersson
2021-10-08 12:53 ` Will Deacon
2021-10-08 12:53   ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1631886935-14691-6-git-send-email-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=mka@chromium.org \
    --cc=ohad@wizery.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=saiprakash.ranjan@codeaurora.org \
    --cc=swboyd@chromium.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.