All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: pabeni@redhat.com, anthony.l.nguyen@intel.com,
	davem@davemloft.net, nechamax.kraus@linux.intel.com,
	sasha.neftin@intel.com, vinschen@redhat.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] igc: fix tunnel offloading" failed to apply to 5.10-stable tree
Date: Mon, 20 Sep 2021 10:08:24 +0200	[thread overview]
Message-ID: <1632125304178128@kroah.com> (raw)


The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 40ee363c844fcb6ae0f1f5cfea68aed7e268c2f4 Mon Sep 17 00:00:00 2001
From: Paolo Abeni <pabeni@redhat.com>
Date: Wed, 15 Sep 2021 10:19:07 -0700
Subject: [PATCH] igc: fix tunnel offloading

Checking tunnel offloading, it turns out that offloading doesn't work
as expected.  The following script allows to reproduce the issue.
Call it as `testscript DEVICE LOCALIP REMOTEIP NETMASK'

=== SNIP ===
if [ $# -ne 4 ]
then
  echo "Usage $0 DEVICE LOCALIP REMOTEIP NETMASK"
  exit 1
fi
DEVICE="$1"
LOCAL_ADDRESS="$2"
REMOTE_ADDRESS="$3"
NWMASK="$4"
echo "Driver: $(ethtool -i ${DEVICE} | awk '/^driver:/{print $2}') "
ethtool -k "${DEVICE}" | grep tx-udp
echo
echo "Set up NIC and tunnel..."
ip addr add "${LOCAL_ADDRESS}/${NWMASK}" dev "${DEVICE}"
ip link set "${DEVICE}" up
sleep 2
ip link add vxlan1 type vxlan id 42 \
		   remote "${REMOTE_ADDRESS}" \
		   local "${LOCAL_ADDRESS}" \
		   dstport 0 \
		   dev "${DEVICE}"
ip addr add fc00::1/64 dev vxlan1
ip link set vxlan1 up
sleep 2
rm -f vxlan.pcap
echo "Running tcpdump and iperf3..."
( nohup tcpdump -i any -w vxlan.pcap >/dev/null 2>&1 ) &
sleep 2
iperf3 -c fc00::2 >/dev/null
pkill tcpdump
echo
echo -n "Max. Paket Size: "
tcpdump -r vxlan.pcap -nnle 2>/dev/null \
| grep "${LOCAL_ADDRESS}.*> ${REMOTE_ADDRESS}.*OTV" \
| awk '{print $8}' | awk -F ':' '{print $1}' \
| sort -n | tail -1
echo
ip link del vxlan1
ip addr del ${LOCAL_ADDRESS}/${NWMASK} dev "${DEVICE}"
=== SNAP ===

The expected outcome is

  Max. Paket Size: 64904

This is what you see on igb, the code igc has been taken from.
However, on igc the output is

  Max. Paket Size: 1516

so the GSO aggregate packets are segmented by the kernel before calling
igc_xmit_frame.  Inside the subsequent call to igc_tso, the check for
skb_is_gso(skb) fails and the function returns prematurely.

It turns out that this occurs because the feature flags aren't set
entirely correctly in igc_probe.  In contrast to the original code
from igb_probe, igc_probe neglects to set the flags required to allow
tunnel offloading.

Setting the same flags as igb fixes the issue on igc.

Fixes: 34428dff3679 ("igc: Add GSO partial support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index b877efae61df..0e19b4d02e62 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6350,7 +6350,9 @@ static int igc_probe(struct pci_dev *pdev,
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	netdev->vlan_features |= netdev->features;
+	netdev->vlan_features |= netdev->features | NETIF_F_TSO_MANGLEID;
+	netdev->mpls_features |= NETIF_F_HW_CSUM;
+	netdev->hw_enc_features |= netdev->vlan_features;
 
 	/* MTU range: 68 - 9216 */
 	netdev->min_mtu = ETH_MIN_MTU;


                 reply	other threads:[~2021-09-20  8:08 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1632125304178128@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=nechamax.kraus@linux.intel.com \
    --cc=pabeni@redhat.com \
    --cc=sasha.neftin@intel.com \
    --cc=stable@vger.kernel.org \
    --cc=vinschen@redhat.com \
    --subject='Re: FAILED: patch "[PATCH] igc: fix tunnel offloading" failed to apply to 5.10-stable tree' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.