All of lore.kernel.org
 help / color / mirror / Atom feed
From: Prasad Malisetty <pmaliset@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	bhelgaas@google.com, robh+dt@kernel.org, swboyd@chromium.org,
	lorenzo.pieralisi@arm.com, svarbanov@mm-sol.com
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	dianders@chromium.org, mka@chromium.org, vbadigan@codeaurora.org,
	sallenki@codeaurora.org, manivannan.sadhasivam@linaro.org,
	Prasad Malisetty <pmaliset@codeaurora.org>
Subject: [PATCH v9 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
Date: Tue, 28 Sep 2021 19:25:49 +0530	[thread overview]
Message-ID: <1632837350-12100-4-git-send-email-pmaliset@codeaurora.org> (raw)
In-Reply-To: <1632837350-12100-1-git-send-email-pmaliset@codeaurora.org>

Enable PCIe controller and PHY for sc7280 IDP board.
Add specific NVMe GPIO entries for SKU1 and SKU2 support.

Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts  |  9 ++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 54 ++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp2.dts |  9 ++++++
 3 files changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 64fc22a..1562386 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -61,6 +61,15 @@
 	modem-init;
 };
 
+&nvme_pwren_pin {
+	pins = "gpio19";
+};
+
+&nvme_3v3_regulators {
+	gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+};
+
 &pmk8350_vadc {
 	pmr735a_die_temp {
 		reg = <PMR735A_ADC7_DIE_TEMP>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index def22ff..5b5505f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -31,6 +31,17 @@
 			linux,can-disable;
 		};
 	};
+
+	nvme_3v3_regulators: nvme-3v3-regulators {
+		compatible = "regulator-fixed";
+		regulator-name = "VLDO_3V3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_pwren_pin>;
+	};
 };
 
 &apps_rsc {
@@ -220,6 +231,42 @@
 	modem-init;
 };
 
+&pcie1 {
+	status = "okay";
+	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&nvme_3v3_regulators>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pcie1_default_state {
+	reset-n {
+		pins = "gpio2";
+		function = "gpio";
+
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	wake-n {
+		pins = "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
 &pmk8350_vadc {
 	pmk8350_die_temp {
 		reg = <PMK8350_ADC7_DIE_TEMP>;
@@ -489,3 +536,10 @@
 		bias-pull-up;
 	};
 };
+
+&tlmm {
+	nvme_pwren_pin: nvme-pwren-pin {
+		function = "gpio";
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
index 1fc2add..0548cb6 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -21,3 +21,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 };
+
+&nvme_pwren_pin {
+	pins = "gpio51";
+};
+
+&nvme_3v3_regulators {
+	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2021-09-28 13:56 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-28 13:55 [PATCH v9 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280 Prasad Malisetty
2021-09-28 13:55 ` [PATCH v9 1/4] dt-bindings: pci: qcom: Document PCIe bindings for SC7280 Prasad Malisetty
2021-09-28 13:55 ` [PATCH v9 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes Prasad Malisetty
2021-09-28 13:55 ` Prasad Malisetty [this message]
2021-09-28 20:52   ` [PATCH v9 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board Stephen Boyd
2021-09-29 15:53     ` Prasad Malisetty
2021-10-01  4:29     ` Prasad Malisetty
2021-09-28 13:55 ` [PATCH v9 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280 Prasad Malisetty
2021-09-28 16:21   ` Bjorn Helgaas
2021-09-29 15:51     ` Prasad Malisetty

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1632837350-12100-4-git-send-email-pmaliset@codeaurora.org \
    --to=pmaliset@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=sallenki@codeaurora.org \
    --cc=svarbanov@mm-sol.com \
    --cc=swboyd@chromium.org \
    --cc=vbadigan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.