* [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
@ 2021-10-04 6:48 Rakesh Pillai
2021-10-04 6:48 ` [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
` (3 more replies)
0 siblings, 4 replies; 17+ messages in thread
From: Rakesh Pillai @ 2021-10-04 6:48 UTC (permalink / raw)
To: agross, bjorn.andersson, ohad, mathieu.poirier, robh+dt, p.zabel
Cc: swboyd, linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise,
kuabhs, Rakesh Pillai
Add support for PIL loading of WPSS co-processor for SC7280 SOCs.
Changes from v4/v5:
- Add yaml conversion for adsp/cdsp dt-bindings
- Change clock names in wpss dt-bindings
- Correct mistake in signed-off enail ID
Rakesh Pillai (3):
dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
.../bindings/remoteproc/qcom,hexagon-v56.txt | 140 --------------
.../bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml | 167 ++++++++++++++++
.../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 196 +++++++++++++++++++
.../bindings/remoteproc/qcom,sdm845-adsp-pil.yaml | 160 ++++++++++++++++
drivers/remoteproc/qcom_q6v5_adsp.c | 209 +++++++++++++++++++--
5 files changed, 717 insertions(+), 155 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
--
2.7.4
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
2021-10-04 6:48 [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
@ 2021-10-04 6:48 ` Rakesh Pillai
2021-10-04 18:30 ` Stephen Boyd
2021-10-12 1:18 ` Rob Herring
2021-10-04 6:48 ` [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
` (2 subsequent siblings)
3 siblings, 2 replies; 17+ messages in thread
From: Rakesh Pillai @ 2021-10-04 6:48 UTC (permalink / raw)
To: agross, bjorn.andersson, ohad, mathieu.poirier, robh+dt, p.zabel
Cc: swboyd, linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise,
kuabhs, Rakesh Pillai
Convert Qualcomm ADSP/CDSP Remoteproc devicetree
binding to YAML.
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
.../bindings/remoteproc/qcom,hexagon-v56.txt | 140 -----------------
.../bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml | 167 +++++++++++++++++++++
.../bindings/remoteproc/qcom,sdm845-adsp-pil.yaml | 160 ++++++++++++++++++++
3 files changed, 327 insertions(+), 140 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
deleted file mode 100644
index 1337a3d..0000000
--- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
+++ /dev/null
@@ -1,140 +0,0 @@
-Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm Technology Inc. Hexagon v56 core.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,qcs404-cdsp-pil",
- "qcom,sdm845-adsp-pil"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must specify the base address and size of the qdsp6ss register
-
-- interrupts-extended:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must list the watchdog, fatal IRQs ready, handover and
- stop-ack IRQs
-
-- interrupt-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: List of phandles and clock specifier pairs for the Hexagon,
- per clock-names below.
-
-- clock-names:
- Usage: required for SDM845 ADSP
- Value type: <stringlist>
- Definition: List of clock input name strings sorted in the same
- order as the clocks property. Definition must have
- "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
- "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
- and "qdsp6ss_core".
-
-- clock-names:
- Usage: required for QCS404 CDSP
- Value type: <stringlist>
- Definition: List of clock input name strings sorted in the same
- order as the clocks property. Definition must have
- "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
- "q6ss_master", "q6_axim".
-
-- power-domains:
- Usage: required
- Value type: <phandle>
- Definition: reference to cx power domain node.
-
-- resets:
- Usage: required
- Value type: <phandle>
- Definition: reference to the list of resets for the Hexagon.
-
-- reset-names:
- Usage: required for SDM845 ADSP
- Value type: <stringlist>
- Definition: must be "pdc_sync" and "cc_lpass"
-
-- reset-names:
- Usage: required for QCS404 CDSP
- Value type: <stringlist>
- Definition: must be "restart"
-
-- qcom,halt-regs:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: a phandle reference to a syscon representing TCSR followed
- by the offset within syscon for Hexagon halt register.
-
-- memory-region:
- Usage: required
- Value type: <phandle>
- Definition: reference to the reserved-memory for the firmware
-
-- qcom,smem-states:
- Usage: required
- Value type: <phandle>
- Definition: reference to the smem state for requesting the Hexagon to
- shut down
-
-- qcom,smem-state-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "stop"
-
-
-= SUBNODES
-The adsp node may have an subnode named "glink-edge" that describes the
-communication edge, channels and devices related to the Hexagon.
-See ../soc/qcom/qcom,glink.txt for details on how to describe these.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the
-ADSP, as it is found on SDM845 boards.
-
- remoteproc@17300000 {
- compatible = "qcom,sdm845-adsp-pil";
- reg = <0x17300000 0x40c>;
-
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_LPASS_SWAY_CLK>,
- <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
- <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
- <&lpasscc LPASS_QDSP6SS_XO_CLK>,
- <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
- <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
- clock-names = "xo", "sway_cbcr",
- "lpass_ahbs_aon_cbcr",
- "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
- "qdsp6ss_sleep", "qdsp6ss_core";
-
- power-domains = <&rpmhpd SDM845_CX>;
-
- resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
- <&aoss_reset AOSS_CC_LPASS_RESTART>;
- reset-names = "pdc_sync", "cc_lpass";
-
- qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
-
- memory-region = <&pil_adsp_mem>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
- };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
new file mode 100644
index 0000000..b698bb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-cdsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 CDSP Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This document defines the binding for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. CDSP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,qcs404-cdsp-pil
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the qdsp6ss register
+
+ interrupts-extended:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+
+ clocks:
+ items:
+ - description: XO clock
+ - description: SWAY clock
+ - description: TBU clock
+ - description: BIMC clock
+ - description: AHB AON clock
+ - description: Q6SS SLAVE clock
+ - description: Q6SS MASTER clock
+ - description: Q6 AXIM clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sway
+ - const: tbu
+ - const: bimc
+ - const: ahb_aon
+ - const: q6ss_slave
+ - const: q6ss_master
+ - const: q6_axim
+
+ power-domains:
+ items:
+ - description: CX power domain
+
+ resets:
+ items:
+ - description: AOSS restart
+
+ reset-names:
+ items:
+ - const: restart
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle reference to a syscon representing TCSR followed by the
+ three offsets within syscon for q6, modem and nc halt registers.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - reset
+ - reset-names
+ - qcom,halt-regs
+ - memory-region
+ - qcom,smem-states
+ - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+ #include <dt-bindings/clock/qcom,turingcc-qcs404.h>
+ remoteproc@b00000 {
+ compatible = "qcom,qcs404-cdsp-pas";
+ reg = <0x00b00000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>,
+ <&gcc GCC_CDSP_CFG_AHB_CLK>,
+ <&gcc GCC_CDSP_TBU_CLK>,
+ <&gcc GCC_BIMC_CDSP_CLK>,
+ <&turingcc TURING_WRAPPER_AON_CLK>,
+ <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+ <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+ <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+ clock-names = "xo",
+ "sway",
+ "tbu",
+ "bimc",
+ "ahb_aon",
+ "q6ss_slave",
+ "q6ss_master",
+ "q6_axim";
+
+ resets = <&gcc GCC_CDSP_RESTART>;
+ reset-names = "restart";
+
+ qcom,halt-regs = <&tcsr 0x19004>;
+
+ memory-region = <&cdsp_fw_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <5>;
+ mboxes = <&apcs_glb 12>;
+
+ label = "cdsp";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
new file mode 100644
index 0000000..972671b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 ADSP Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This document defines the binding for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. ADSP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sdm845-adsp-pil
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the qdsp6ss register
+
+ interrupts-extended:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+
+ clocks:
+ items:
+ - description: XO clock
+ - description: SWAY clock
+ - description: LPASS AHBS AON clock
+ - description: LPASS AHBM AON clock
+ - description: QDSP XO clock
+ - description: Q6SP6SS SLEEP clock
+ - description: Q6SP6SS CORE clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sway_cbcr
+ - const: lpass_ahbs_aon_cbcr
+ - const: lpass_ahbm_aon_cbcr
+ - const: qdsp6ss_xo
+ - const: qdsp6ss_sleep
+ - const: qdsp6ss_core
+
+ power-domains:
+ items:
+ - description: CX power domain
+
+ resets:
+ items:
+ - description: PDC AUDIO SYNC RESET
+ - description: CC LPASS restart
+
+ reset-names:
+ items:
+ - const: pdc_sync
+ - const: cc_lpass
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle reference to a syscon representing TCSR followed by the
+ three offsets within syscon for q6, modem and nc halt registers.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+ - reset-names
+ - qcom,halt-regs
+ - memory-region
+ - qcom,smem-states
+ - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,lpass-sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ remoteproc@17300000 {
+ compatible = "qcom,sdm845-adsp-pil";
+ reg = <0x17300000 0x40c>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_LPASS_SWAY_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
+ <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
+ <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+ <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+ <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+ clock-names = "xo", "sway_cbcr",
+ "lpass_ahbs_aon_cbcr",
+ "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+ "qdsp6ss_sleep", "qdsp6ss_core";
+
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+ <&aoss_reset AOSS_CC_LPASS_RESTART>;
+ reset-names = "pdc_sync", "cc_lpass";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-04 6:48 [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-10-04 6:48 ` [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
@ 2021-10-04 6:48 ` Rakesh Pillai
2021-10-04 12:21 ` Rob Herring
2021-10-04 6:48 ` [PATCH v6 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
2021-10-07 18:34 ` [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Stephen Boyd
3 siblings, 1 reply; 17+ messages in thread
From: Rakesh Pillai @ 2021-10-04 6:48 UTC (permalink / raw)
To: agross, bjorn.andersson, ohad, mathieu.poirier, robh+dt, p.zabel
Cc: swboyd, linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise,
kuabhs, Rakesh Pillai
Add WPSS PIL loading support for SC7280 SoCs.
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
.../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 196 +++++++++++++++++++++
1 file changed, 196 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
new file mode 100644
index 0000000..bb62760
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 WPSS Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This document defines the binding for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. WPSS.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7280-wpss-pil
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the qdsp6ss register
+
+ interrupts:
+ minItems: 6
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ - description: Shutdown acknowledge interrupt
+
+ interrupt-names:
+ minItems: 6
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+ - const: shutdown-ack
+
+ clocks:
+ minItems: 4
+ items:
+ - description: GCC WPSS AHB BDG Master clock
+ - description: GCC WPSS AHB clock
+ - description: GCC WPSS RSCP clock
+ - description: XO clock
+
+ clock-names:
+ minItems: 4
+ items:
+ - const: ahb_bdg
+ - const: ahb
+ - const: rscp
+ - const: xo
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: CX power domain
+ - description: MX power domain
+
+ power-domain-names:
+ minItems: 2
+ items:
+ - const: cx
+ - const: mx
+
+ resets:
+ minItems: 2
+ items:
+ - description: AOSS restart
+ - description: PDC SYNC
+
+ reset-names:
+ minItems: 2
+ items:
+ - const: restart
+ - const: pdc_sync
+
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle reference to a syscon representing TCSR followed by the
+ three offsets within syscon for q6, modem and nc halt registers.
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+ glink-edge:
+ type: object
+ description:
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the ADSP.
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - reset
+ - reset-names
+ - qcom,halt-regs
+ - memory-region
+ - qcom,qmp
+ - qcom,smem-states
+ - qcom,smem-state-names
+ - glink-edge
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+ remoteproc@8a00000 {
+ compatible = "qcom,sc7280-wpss-pil";
+ reg = <0x08a00000 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+ <&gcc GCC_WPSS_AHB_CLK>,
+ <&gcc GCC_WPSS_RSCP_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ahb_bdg", "ahb",
+ "rscp", "xo";
+
+ power-domains = <&rpmhpd SC7280_CX>,
+ <&rpmhpd SC7280_MX>;
+ power-domain-names = "cx", "mx";
+
+ memory-region = <&wpss_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&wpss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+ <&pdc_reset PDC_WPSS_SYNC_RESET>;
+ reset-names = "restart", "pdc_sync";
+
+ qcom,halt-regs = <&tcsr_mutex 0x37000>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "wpss";
+ qcom,remote-pid = <13>;
+ };
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v6 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
2021-10-04 6:48 [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-10-04 6:48 ` [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
2021-10-04 6:48 ` [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
@ 2021-10-04 6:48 ` Rakesh Pillai
2021-10-04 18:35 ` Stephen Boyd
2021-10-07 18:34 ` [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Stephen Boyd
3 siblings, 1 reply; 17+ messages in thread
From: Rakesh Pillai @ 2021-10-04 6:48 UTC (permalink / raw)
To: agross, bjorn.andersson, ohad, mathieu.poirier, robh+dt, p.zabel
Cc: swboyd, linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise,
kuabhs, Rakesh Pillai
Add support for PIL loading of WPSS processor for SC7280
- WPSS boot will be requested by the wifi driver and hence
disable auto-boot for WPSS.
- Add a separate shutdown sequence handler for WPSS.
- Add multiple power-domain voting support
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
drivers/remoteproc/qcom_q6v5_adsp.c | 209 +++++++++++++++++++++++++++++++++---
1 file changed, 194 insertions(+), 15 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 098362e6..b6d3c3d 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -32,6 +32,7 @@
/* time out value */
#define ACK_TIMEOUT 1000
+#define ACK_TIMEOUT_US 1000000
#define BOOT_FSM_TIMEOUT 10000
/* mask values */
#define EVB_MASK GENMASK(27, 4)
@@ -51,6 +52,8 @@
#define QDSP6SS_CORE_CBCR 0x20
#define QDSP6SS_SLEEP_CBCR 0x3c
+#define QCOM_Q6V5_RPROC_PROXY_PD_MAX 3
+
struct adsp_pil_data {
int crash_reason_smem;
const char *firmware_name;
@@ -58,9 +61,13 @@ struct adsp_pil_data {
const char *ssr_name;
const char *sysmon_name;
int ssctl_id;
+ bool is_wpss;
+ bool auto_boot;
const char **clk_ids;
int num_clks;
+ const char **proxy_pd_names;
+ const char *load_state;
};
struct qcom_adsp {
@@ -93,11 +100,143 @@ struct qcom_adsp {
void *mem_region;
size_t mem_size;
+ struct device *proxy_pds[QCOM_Q6V5_RPROC_PROXY_PD_MAX];
+ int proxy_pd_count;
+
struct qcom_rproc_glink glink_subdev;
struct qcom_rproc_ssr ssr_subdev;
struct qcom_sysmon *sysmon;
+
+ int (*shutdown)(struct qcom_adsp *adsp);
};
+static int qcom_rproc_pds_attach(struct device *dev, struct device **devs,
+ const char **pd_names)
+{
+ size_t num_pds = 0;
+ int ret;
+ int i;
+
+ if (!pd_names)
+ return 0;
+
+ /* Handle single power domain */
+ if (dev->pm_domain) {
+ devs[0] = dev;
+ pm_runtime_enable(dev);
+ return 1;
+ }
+
+ while (pd_names[num_pds])
+ num_pds++;
+
+ for (i = 0; i < num_pds; i++) {
+ devs[i] = dev_pm_domain_attach_by_name(dev, pd_names[i]);
+ if (IS_ERR_OR_NULL(devs[i])) {
+ ret = PTR_ERR(devs[i]) ? : -ENODATA;
+ goto unroll_attach;
+ }
+ }
+
+ return num_pds;
+
+unroll_attach:
+ for (i--; i >= 0; i--)
+ dev_pm_domain_detach(devs[i], false);
+
+ return ret;
+}
+
+static void qcom_rproc_pds_detach(struct qcom_adsp *adsp, struct device **pds,
+ size_t pd_count)
+{
+ struct device *dev = adsp->dev;
+ int i;
+
+ /* Handle single power domain */
+ if (dev->pm_domain && pd_count) {
+ pm_runtime_disable(dev);
+ return;
+ }
+
+ for (i = 0; i < pd_count; i++)
+ dev_pm_domain_detach(pds[i], false);
+}
+
+static int qcom_rproc_pds_enable(struct qcom_adsp *adsp, struct device **pds,
+ size_t pd_count)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < pd_count; i++) {
+ dev_pm_genpd_set_performance_state(pds[i], INT_MAX);
+ ret = pm_runtime_get_sync(pds[i]);
+ if (ret < 0) {
+ pm_runtime_put_noidle(pds[i]);
+ dev_pm_genpd_set_performance_state(pds[i], 0);
+ goto unroll_pd_votes;
+ }
+ }
+
+ return 0;
+
+unroll_pd_votes:
+ for (i--; i >= 0; i--) {
+ dev_pm_genpd_set_performance_state(pds[i], 0);
+ pm_runtime_put(pds[i]);
+ }
+
+ return ret;
+}
+
+static void qcom_rproc_pds_disable(struct qcom_adsp *adsp, struct device **pds,
+ size_t pd_count)
+{
+ int i;
+
+ for (i = 0; i < pd_count; i++) {
+ dev_pm_genpd_set_performance_state(pds[i], 0);
+ pm_runtime_put(pds[i]);
+ }
+}
+
+static int qcom_wpss_shutdown(struct qcom_adsp *adsp)
+{
+ unsigned int val;
+
+ regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 1);
+
+ /* Wait for halt ACK from QDSP6 */
+ regmap_read_poll_timeout(adsp->halt_map,
+ adsp->halt_lpass + LPASS_HALTACK_REG, val,
+ val, 1000, ACK_TIMEOUT_US);
+
+ /* Assert the WPSS PDC Reset */
+ reset_control_assert(adsp->pdc_sync_reset);
+ /* Place the WPSS processor into reset */
+ reset_control_assert(adsp->restart);
+ /* wait after asserting subsystem restart from AOSS */
+ usleep_range(200, 205);
+ /* Remove the WPSS reset */
+ reset_control_deassert(adsp->restart);
+ /* De-assert the WPSS PDC Reset */
+ reset_control_deassert(adsp->pdc_sync_reset);
+
+ usleep_range(100, 105);
+
+ clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks);
+
+ regmap_write(adsp->halt_map, adsp->halt_lpass + LPASS_HALTREQ_REG, 0);
+
+ /* Wait for halt ACK from QDSP6 */
+ regmap_read_poll_timeout(adsp->halt_map,
+ adsp->halt_lpass + LPASS_HALTACK_REG, val,
+ !val, 1000, ACK_TIMEOUT_US);
+
+ return 0;
+}
+
static int qcom_adsp_shutdown(struct qcom_adsp *adsp)
{
unsigned long timeout;
@@ -193,12 +332,10 @@ static int adsp_start(struct rproc *rproc)
if (ret)
goto disable_irqs;
- dev_pm_genpd_set_performance_state(adsp->dev, INT_MAX);
- ret = pm_runtime_get_sync(adsp->dev);
- if (ret) {
- pm_runtime_put_noidle(adsp->dev);
+ ret = qcom_rproc_pds_enable(adsp, adsp->proxy_pds,
+ adsp->proxy_pd_count);
+ if (ret < 0)
goto disable_xo_clk;
- }
ret = clk_bulk_prepare_enable(adsp->num_clks, adsp->clks);
if (ret) {
@@ -243,8 +380,7 @@ static int adsp_start(struct rproc *rproc)
disable_adsp_clks:
clk_bulk_disable_unprepare(adsp->num_clks, adsp->clks);
disable_power_domain:
- dev_pm_genpd_set_performance_state(adsp->dev, 0);
- pm_runtime_put(adsp->dev);
+ qcom_rproc_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
disable_xo_clk:
clk_disable_unprepare(adsp->xo);
disable_irqs:
@@ -258,8 +394,7 @@ static void qcom_adsp_pil_handover(struct qcom_q6v5 *q6v5)
struct qcom_adsp *adsp = container_of(q6v5, struct qcom_adsp, q6v5);
clk_disable_unprepare(adsp->xo);
- dev_pm_genpd_set_performance_state(adsp->dev, 0);
- pm_runtime_put(adsp->dev);
+ qcom_rproc_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
}
static int adsp_stop(struct rproc *rproc)
@@ -272,7 +407,7 @@ static int adsp_stop(struct rproc *rproc)
if (ret == -ETIMEDOUT)
dev_err(adsp->dev, "timed out on wait\n");
- ret = qcom_adsp_shutdown(adsp);
+ ret = adsp->shutdown(adsp);
if (ret)
dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
@@ -441,6 +576,8 @@ static int adsp_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "unable to allocate remoteproc\n");
return -ENOMEM;
}
+
+ rproc->auto_boot = desc->auto_boot;
rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
adsp = (struct qcom_adsp *)rproc->priv;
@@ -449,6 +586,11 @@ static int adsp_probe(struct platform_device *pdev)
adsp->info_name = desc->sysmon_name;
platform_set_drvdata(pdev, adsp);
+ if (desc->is_wpss)
+ adsp->shutdown = qcom_wpss_shutdown;
+ else
+ adsp->shutdown = qcom_adsp_shutdown;
+
ret = adsp_alloc_memory_region(adsp);
if (ret)
goto free_rproc;
@@ -457,7 +599,13 @@ static int adsp_probe(struct platform_device *pdev)
if (ret)
goto free_rproc;
- pm_runtime_enable(adsp->dev);
+ ret = qcom_rproc_pds_attach(adsp->dev, adsp->proxy_pds,
+ desc->proxy_pd_names);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to attach proxy power domains\n");
+ goto free_rproc;
+ }
+ adsp->proxy_pd_count = ret;
ret = adsp_init_reset(adsp);
if (ret)
@@ -467,8 +615,8 @@ static int adsp_probe(struct platform_device *pdev)
if (ret)
goto disable_pm;
- ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, NULL,
- qcom_adsp_pil_handover);
+ ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+ desc->load_state, qcom_adsp_pil_handover);
if (ret)
goto disable_pm;
@@ -489,7 +637,8 @@ static int adsp_probe(struct platform_device *pdev)
return 0;
disable_pm:
- pm_runtime_disable(adsp->dev);
+ qcom_rproc_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
+
free_rproc:
rproc_free(rproc);
@@ -506,7 +655,7 @@ static int adsp_remove(struct platform_device *pdev)
qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
qcom_remove_sysmon_subdev(adsp->sysmon);
qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
- pm_runtime_disable(adsp->dev);
+ qcom_rproc_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
rproc_free(adsp->rproc);
return 0;
@@ -518,11 +667,16 @@ static const struct adsp_pil_data adsp_resource_init = {
.ssr_name = "lpass",
.sysmon_name = "adsp",
.ssctl_id = 0x14,
+ .is_wpss = false,
+ .auto_boot = true,
.clk_ids = (const char*[]) {
"sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr",
"qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core", NULL
},
.num_clks = 7,
+ .proxy_pd_names = (const char*[]) {
+ "cx", NULL
+ },
};
static const struct adsp_pil_data cdsp_resource_init = {
@@ -531,15 +685,40 @@ static const struct adsp_pil_data cdsp_resource_init = {
.ssr_name = "cdsp",
.sysmon_name = "cdsp",
.ssctl_id = 0x17,
+ .is_wpss = false,
+ .auto_boot = true,
.clk_ids = (const char*[]) {
"sway", "tbu", "bimc", "ahb_aon", "q6ss_slave", "q6ss_master",
"q6_axim", NULL
},
.num_clks = 7,
+ .proxy_pd_names = (const char*[]) {
+ "cx", NULL
+ },
+};
+
+static const struct adsp_pil_data wpss_resource_init = {
+ .crash_reason_smem = 626,
+ .firmware_name = "wpss.mdt",
+ .ssr_name = "wpss",
+ .sysmon_name = "wpss",
+ .ssctl_id = 0x19,
+ .is_wpss = true,
+ .auto_boot = false,
+ .load_state = "wpss",
+ .clk_ids = (const char*[]) {
+ "gcc_wpss_ahb_bdg_mst_clk", "gcc_wpss_ahb_clk",
+ "gcc_wpss_rscp_clk", NULL
+ },
+ .num_clks = 3,
+ .proxy_pd_names = (const char*[]) {
+ "cx", "mx", NULL
+ },
};
static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,qcs404-cdsp-pil", .data = &cdsp_resource_init },
+ { .compatible = "qcom,sc7280-wpss-pil", .data = &wpss_resource_init },
{ .compatible = "qcom,sdm845-adsp-pil", .data = &adsp_resource_init },
{ },
};
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-04 6:48 ` [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
@ 2021-10-04 12:21 ` Rob Herring
2021-10-06 5:09 ` pillair
0 siblings, 1 reply; 17+ messages in thread
From: Rob Herring @ 2021-10-04 12:21 UTC (permalink / raw)
To: Rakesh Pillai
Cc: mathieu.poirier, swboyd, p.zabel, devicetree, bjorn.andersson,
linux-kernel, robh+dt, sibis, kuabhs, agross, ohad,
linux-arm-msm, mpubbise
On Mon, 04 Oct 2021 12:18:52 +0530, Rakesh Pillai wrote:
> Add WPSS PIL loading support for SC7280 SoCs.
>
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
> .../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 196 +++++++++++++++++++++
> 1 file changed, 196 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: properties:interrupts: 'oneOf' conditional failed, one must be fixed:
[{'description': 'Watchdog interrupt'}, {'description': 'Fatal interrupt'}, {'description': 'Ready interrupt'}, {'description': 'Handover interrupt'}, {'description': 'Stop acknowledge interrupt'}, {'description': 'Shutdown acknowledge interrupt'}] is too long
[{'description': 'Watchdog interrupt'}, {'description': 'Fatal interrupt'}, {'description': 'Ready interrupt'}, {'description': 'Handover interrupt'}, {'description': 'Stop acknowledge interrupt'}, {'description': 'Shutdown acknowledge interrupt'}] is too short
False schema does not allow 6
1 was expected
6 is greater than the maximum of 2
6 is greater than the maximum of 3
6 is greater than the maximum of 4
6 is greater than the maximum of 5
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: properties:interrupt-names: 'oneOf' conditional failed, one must be fixed:
[{'const': 'wdog'}, {'const': 'fatal'}, {'const': 'ready'}, {'const': 'handover'}, {'const': 'stop-ack'}, {'const': 'shutdown-ack'}] is too long
[{'const': 'wdog'}, {'const': 'fatal'}, {'const': 'ready'}, {'const': 'handover'}, {'const': 'stop-ack'}, {'const': 'shutdown-ack'}] is too short
False schema does not allow 6
1 was expected
6 is greater than the maximum of 2
6 is greater than the maximum of 3
6 is greater than the maximum of 4
6 is greater than the maximum of 5
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: properties:clocks: 'oneOf' conditional failed, one must be fixed:
[{'description': 'GCC WPSS AHB BDG Master clock'}, {'description': 'GCC WPSS AHB clock'}, {'description': 'GCC WPSS RSCP clock'}, {'description': 'XO clock'}] is too long
[{'description': 'GCC WPSS AHB BDG Master clock'}, {'description': 'GCC WPSS AHB clock'}, {'description': 'GCC WPSS RSCP clock'}, {'description': 'XO clock'}] is too short
False schema does not allow 4
1 was expected
4 is greater than the maximum of 2
4 is greater than the maximum of 3
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed:
[{'const': 'ahb_bdg'}, {'const': 'ahb'}, {'const': 'rscp'}, {'const': 'xo'}] is too long
[{'const': 'ahb_bdg'}, {'const': 'ahb'}, {'const': 'rscp'}, {'const': 'xo'}] is too short
False schema does not allow 4
1 was expected
4 is greater than the maximum of 2
4 is greater than the maximum of 3
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: properties:power-domains: 'oneOf' conditional failed, one must be fixed:
[{'description': 'CX power domain'}, {'description': 'MX power domain'}] is too long
[{'description': 'CX power domain'}, {'description': 'MX power domain'}] is too short
False schema does not allow 2
1 was expected
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: properties:power-domain-names: 'oneOf' conditional failed, one must be fixed:
[{'const': 'cx'}, {'const': 'mx'}] is too long
[{'const': 'cx'}, {'const': 'mx'}] is too short
False schema does not allow 2
1 was expected
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: properties:resets: 'oneOf' conditional failed, one must be fixed:
[{'description': 'AOSS restart'}, {'description': 'PDC SYNC'}] is too long
[{'description': 'AOSS restart'}, {'description': 'PDC SYNC'}] is too short
False schema does not allow 2
1 was expected
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: properties:reset-names: 'oneOf' conditional failed, one must be fixed:
[{'const': 'restart'}, {'const': 'pdc_sync'}] is too long
[{'const': 'restart'}, {'const': 'pdc_sync'}] is too short
False schema does not allow 2
1 was expected
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml: ignoring, error in schema: properties: interrupts
warning: no schema found in file: ./Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.example.dt.yaml:0:0: /example-0/remoteproc@8a00000: failed to match any schema with compatible: ['qcom,sc7280-wpss-pil']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1535950
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
2021-10-04 6:48 ` [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
@ 2021-10-04 18:30 ` Stephen Boyd
2021-10-12 1:18 ` Rob Herring
1 sibling, 0 replies; 17+ messages in thread
From: Stephen Boyd @ 2021-10-04 18:30 UTC (permalink / raw)
To: Rakesh Pillai, agross, bjorn.andersson, mathieu.poirier, ohad,
p.zabel, robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
Quoting Rakesh Pillai (2021-10-03 23:48:51)
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
> new file mode 100644
> index 0000000..b698bb7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
> @@ -0,0 +1,167 @@
[...]
> +
> + qcom,smem-state-names:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: The names of the state bits used for SMP2P output
> + items:
> + - const: stop
> +
> +required:
> + - compatible
> + - reg
> + - interrupts-extended
> + - interrupt-names
> + - clocks
> + - clock-names
> + - power-domains
> + - reset
> + - reset-names
> + - qcom,halt-regs
> + - memory-region
> + - qcom,smem-states
> + - qcom,smem-state-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-qcs404.h>
> + #include <dt-bindings/clock/qcom,turingcc-qcs404.h>
> + remoteproc@b00000 {
> + compatible = "qcom,qcs404-cdsp-pas";
> + reg = <0x00b00000 0x4040>;
> +
> + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&xo_board>,
> + <&gcc GCC_CDSP_CFG_AHB_CLK>,
> + <&gcc GCC_CDSP_TBU_CLK>,
> + <&gcc GCC_BIMC_CDSP_CLK>,
> + <&turingcc TURING_WRAPPER_AON_CLK>,
> + <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
> + <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
> + <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
> + clock-names = "xo",
> + "sway",
> + "tbu",
> + "bimc",
> + "ahb_aon",
> + "q6ss_slave",
> + "q6ss_master",
> + "q6_axim";
> +
> + resets = <&gcc GCC_CDSP_RESTART>;
> + reset-names = "restart";
> +
> + qcom,halt-regs = <&tcsr 0x19004>;
> +
> + memory-region = <&cdsp_fw_mem>;
> +
> + qcom,smem-states = <&cdsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + glink-edge {
Where is glink-edge documented as a property?
> + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,remote-pid = <5>;
> + mboxes = <&apcs_glb 12>;
> +
> + label = "cdsp";
It would be good to have these properties defined as well and maybe
include the common schema for a glink edge that way.
> + };
> + };
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v6 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
2021-10-04 6:48 ` [PATCH v6 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
@ 2021-10-04 18:35 ` Stephen Boyd
0 siblings, 0 replies; 17+ messages in thread
From: Stephen Boyd @ 2021-10-04 18:35 UTC (permalink / raw)
To: Rakesh Pillai, agross, bjorn.andersson, mathieu.poirier, ohad,
p.zabel, robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
Quoting Rakesh Pillai (2021-10-03 23:48:53)
> Add support for PIL loading of WPSS processor for SC7280
> - WPSS boot will be requested by the wifi driver and hence
> disable auto-boot for WPSS.
> - Add a separate shutdown sequence handler for WPSS.
> - Add multiple power-domain voting support
>
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
This changed? Please don't keep reviewed-by if things changed
significantly.
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index 098362e6..b6d3c3d 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -531,15 +685,40 @@ static const struct adsp_pil_data cdsp_resource_init = {
> .ssr_name = "cdsp",
> .sysmon_name = "cdsp",
> .ssctl_id = 0x17,
> + .is_wpss = false,
> + .auto_boot = true,
> .clk_ids = (const char*[]) {
> "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave", "q6ss_master",
> "q6_axim", NULL
> },
> .num_clks = 7,
> + .proxy_pd_names = (const char*[]) {
> + "cx", NULL
> + },
> +};
> +
> +static const struct adsp_pil_data wpss_resource_init = {
> + .crash_reason_smem = 626,
> + .firmware_name = "wpss.mdt",
> + .ssr_name = "wpss",
> + .sysmon_name = "wpss",
> + .ssctl_id = 0x19,
> + .is_wpss = true,
> + .auto_boot = false,
> + .load_state = "wpss",
> + .clk_ids = (const char*[]) {
> + "gcc_wpss_ahb_bdg_mst_clk", "gcc_wpss_ahb_clk",
> + "gcc_wpss_rscp_clk", NULL
Please remove "gcc_wpss_" prefix and "_clk" postfix. Does that make this
match the binding?
> + },
> + .num_clks = 3,
> + .proxy_pd_names = (const char*[]) {
> + "cx", "mx", NULL
> + },
> };
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-04 12:21 ` Rob Herring
@ 2021-10-06 5:09 ` pillair
2021-10-06 7:09 ` Stephen Boyd
0 siblings, 1 reply; 17+ messages in thread
From: pillair @ 2021-10-06 5:09 UTC (permalink / raw)
To: 'Rob Herring'
Cc: mathieu.poirier, swboyd, p.zabel, devicetree, bjorn.andersson,
linux-kernel, robh+dt, sibis, kuabhs, agross, ohad,
linux-arm-msm, mpubbise
> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: Monday, October 4, 2021 5:51 PM
> To: Rakesh Pillai <pillair@codeaurora.org>
> Cc: mathieu.poirier@linaro.org; swboyd@chromium.org;
> p.zabel@pengutronix.de; devicetree@vger.kernel.org;
> bjorn.andersson@linaro.org; linux-kernel@vger.kernel.org;
> robh+dt@kernel.org; sibis@codeaurora.org; kuabhs@chromium.org;
> agross@kernel.org; ohad@wizery.com; linux-arm-msm@vger.kernel.org;
> mpubbise@codeaurora.org
> Subject: Re: [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280
> WPSS support
>
> On Mon, 04 Oct 2021 12:18:52 +0530, Rakesh Pillai wrote:
> > Add WPSS PIL loading support for SC7280 SoCs.
> >
> > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> > ---
> > .../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 196
> > +++++++++++++++++++++
> > 1 file changed, 196 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-
> pil.yaml
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m
> dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: properties:interrupts: 'oneOf' conditional failed, one must
be
> fixed:
> [{'description': 'Watchdog interrupt'}, {'description': 'Fatal
interrupt'},
> {'description': 'Ready interrupt'}, {'description': 'Handover interrupt'},
> {'description': 'Stop acknowledge interrupt'}, {'description': 'Shutdown
> acknowledge interrupt'}] is too long
> [{'description': 'Watchdog interrupt'}, {'description': 'Fatal
interrupt'},
> {'description': 'Ready interrupt'}, {'description': 'Handover interrupt'},
> {'description': 'Stop acknowledge interrupt'}, {'description': 'Shutdown
> acknowledge interrupt'}] is too short
> False schema does not allow 6
> 1 was expected
> 6 is greater than the maximum of 2
> 6 is greater than the maximum of 3
> 6 is greater than the maximum of 4
> 6 is greater than the maximum of 5
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: properties:interrupt-names: 'oneOf' conditional failed, one
> must be fixed:
> [{'const': 'wdog'}, {'const': 'fatal'}, {'const': 'ready'},
{'const':
> 'handover'}, {'const': 'stop-ack'}, {'const': 'shutdown-ack'}] is too long
> [{'const': 'wdog'}, {'const': 'fatal'}, {'const': 'ready'},
{'const':
> 'handover'}, {'const': 'stop-ack'}, {'const': 'shutdown-ack'}] is too
short
> False schema does not allow 6
> 1 was expected
> 6 is greater than the maximum of 2
> 6 is greater than the maximum of 3
> 6 is greater than the maximum of 4
> 6 is greater than the maximum of 5
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: properties:clocks: 'oneOf' conditional failed, one must be
> fixed:
> [{'description': 'GCC WPSS AHB BDG Master clock'}, {'description':
> 'GCC WPSS AHB clock'}, {'description': 'GCC WPSS RSCP clock'},
{'description':
> 'XO clock'}] is too long
> [{'description': 'GCC WPSS AHB BDG Master clock'}, {'description':
> 'GCC WPSS AHB clock'}, {'description': 'GCC WPSS RSCP clock'},
{'description':
> 'XO clock'}] is too short
> False schema does not allow 4
> 1 was expected
> 4 is greater than the maximum of 2
> 4 is greater than the maximum of 3
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: properties:clock-names: 'oneOf' conditional failed, one
must
> be fixed:
> [{'const': 'ahb_bdg'}, {'const': 'ahb'}, {'const': 'rscp'},
{'const': 'xo'}] is
> too long
> [{'const': 'ahb_bdg'}, {'const': 'ahb'}, {'const': 'rscp'},
{'const': 'xo'}] is
> too short
> False schema does not allow 4
> 1 was expected
> 4 is greater than the maximum of 2
> 4 is greater than the maximum of 3
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: properties:power-domains: 'oneOf' conditional failed, one
> must be fixed:
> [{'description': 'CX power domain'}, {'description': 'MX power
> domain'}] is too long
> [{'description': 'CX power domain'}, {'description': 'MX power
> domain'}] is too short
> False schema does not allow 2
> 1 was expected
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: properties:power-domain-names: 'oneOf' conditional failed,
> one must be fixed:
> [{'const': 'cx'}, {'const': 'mx'}] is too long
> [{'const': 'cx'}, {'const': 'mx'}] is too short
> False schema does not allow 2
> 1 was expected
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: properties:resets: 'oneOf' conditional failed, one must be
> fixed:
> [{'description': 'AOSS restart'}, {'description': 'PDC SYNC'}] is
too long
> [{'description': 'AOSS restart'}, {'description': 'PDC SYNC'}] is
too short
> False schema does not allow 2
> 1 was expected
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: properties:reset-names: 'oneOf' conditional failed, one
must
> be fixed:
> [{'const': 'restart'}, {'const': 'pdc_sync'}] is too long
> [{'const': 'restart'}, {'const': 'pdc_sync'}] is too short
> False schema does not allow 2
> 1 was expected
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/linux-dt-
> review/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-
> wpss-pil.yaml: ignoring, error in schema: properties: interrupts
> warning: no schema found in file:
> ./Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-
> pil.yaml
> Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-
> pil.example.dt.yaml:0:0: /example-0/remoteproc@8a00000: failed to match
> any schema with compatible: ['qcom,sc7280-wpss-pil']
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/patch/1535950
>
> This check can fail if there are any dependencies. The base for a patch
series
> is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
error(s),
> then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
I have updated the dtschema (2021.7) and still not seeing these errors. I
will fix the errors mentioned in this log though.
Is there any other flag/setting, which is to be enabled ?
Thanks,
Rakesh Pillai.
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-06 5:09 ` pillair
@ 2021-10-06 7:09 ` Stephen Boyd
2021-10-06 16:56 ` pillair
0 siblings, 1 reply; 17+ messages in thread
From: Stephen Boyd @ 2021-10-06 7:09 UTC (permalink / raw)
To: Rob Herring, pillair
Cc: mathieu.poirier, p.zabel, devicetree, bjorn.andersson,
linux-kernel, robh+dt, sibis, kuabhs, agross, ohad,
linux-arm-msm, mpubbise
Quoting pillair@codeaurora.org (2021-10-05 22:09:18)
>
> >
> > If you already ran 'make dt_binding_check' and didn't see the above
> error(s),
> > then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> >
> > pip3 install dtschema --upgrade
> >
> > Please check and re-submit.
>
>
> I have updated the dtschema (2021.7) and still not seeing these errors. I
> will fix the errors mentioned in this log though.
> Is there any other flag/setting, which is to be enabled ?
>
I have dtschema-2021.10 installed.
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
2021-10-06 7:09 ` Stephen Boyd
@ 2021-10-06 16:56 ` pillair
0 siblings, 0 replies; 17+ messages in thread
From: pillair @ 2021-10-06 16:56 UTC (permalink / raw)
To: 'Stephen Boyd', 'Rob Herring'
Cc: mathieu.poirier, p.zabel, devicetree, bjorn.andersson,
linux-kernel, robh+dt, sibis, kuabhs, agross, ohad,
linux-arm-msm, mpubbise
> -----Original Message-----
> From: Stephen Boyd <swboyd@chromium.org>
> Sent: Wednesday, October 6, 2021 12:40 PM
> To: Rob Herring <robh@kernel.org>; pillair@codeaurora.org
> Cc: mathieu.poirier@linaro.org; p.zabel@pengutronix.de;
> devicetree@vger.kernel.org; bjorn.andersson@linaro.org; linux-
> kernel@vger.kernel.org; robh+dt@kernel.org; sibis@codeaurora.org;
> kuabhs@chromium.org; agross@kernel.org; ohad@wizery.com; linux-arm-
> msm@vger.kernel.org; mpubbise@codeaurora.org
> Subject: RE: [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280
> WPSS support
>
> Quoting pillair@codeaurora.org (2021-10-05 22:09:18)
> >
> > >
> > > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s),
> > > then make sure 'yamllint' is installed and dt-schema is up to
> > > date:
> > >
> > > pip3 install dtschema --upgrade
> > >
> > > Please check and re-submit.
> >
> >
> > I have updated the dtschema (2021.7) and still not seeing these
> > errors. I will fix the errors mentioned in this log though.
> > Is there any other flag/setting, which is to be enabled ?
> >
>
> I have dtschema-2021.10 installed.
Thanks Stephen. Yes, my dtschema, for some reason, was not getting updated.
After upgrading it to 2021.10, I was able to see the same errors.
I will send out the next patchset with these errors fixed.
Thanks,
Rakesh Pillai.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
2021-10-04 6:48 [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
` (2 preceding siblings ...)
2021-10-04 6:48 ` [PATCH v6 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
@ 2021-10-07 18:34 ` Stephen Boyd
2021-10-28 13:08 ` pillair
3 siblings, 1 reply; 17+ messages in thread
From: Stephen Boyd @ 2021-10-07 18:34 UTC (permalink / raw)
To: Rakesh Pillai, agross, bjorn.andersson, mathieu.poirier, ohad,
p.zabel, robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
Quoting Rakesh Pillai (2021-10-03 23:48:50)
> Add support for PIL loading of WPSS co-processor for SC7280 SOCs.
>
> Changes from v4/v5:
> - Add yaml conversion for adsp/cdsp dt-bindings
> - Change clock names in wpss dt-bindings
> - Correct mistake in signed-off enail ID
Can you keep a running tally here of the full progression of the series?
That helps to look back and make sure we don't make a comment that has
already been made before.
One more request. Can you add support for 'firmware-name' like there is
in Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt so that we
can install firmware into some namespaced/versioned place instead of
having to put wpss files into /lib/firmware? It would also be nice to
load a single firmware file instead of having to split the file into
many pieces.
>
> Rakesh Pillai (3):
> dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
> dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
> remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
2021-10-04 6:48 ` [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
2021-10-04 18:30 ` Stephen Boyd
@ 2021-10-12 1:18 ` Rob Herring
2021-10-28 13:09 ` pillair
1 sibling, 1 reply; 17+ messages in thread
From: Rob Herring @ 2021-10-12 1:18 UTC (permalink / raw)
To: Rakesh Pillai
Cc: agross, bjorn.andersson, ohad, mathieu.poirier, p.zabel, swboyd,
linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
On Mon, Oct 04, 2021 at 12:18:51PM +0530, Rakesh Pillai wrote:
> Convert Qualcomm ADSP/CDSP Remoteproc devicetree
> binding to YAML.
>
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
> .../bindings/remoteproc/qcom,hexagon-v56.txt | 140 -----------------
> .../bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml | 167 +++++++++++++++++++++
> .../bindings/remoteproc/qcom,sdm845-adsp-pil.yaml | 160 ++++++++++++++++++++
> 3 files changed, 327 insertions(+), 140 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
> deleted file mode 100644
> index 1337a3d..0000000
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
> +++ /dev/null
> @@ -1,140 +0,0 @@
> -Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
> -
> -This document defines the binding for a component that loads and boots firmware
> -on the Qualcomm Technology Inc. Hexagon v56 core.
> -
> -- compatible:
> - Usage: required
> - Value type: <string>
> - Definition: must be one of:
> - "qcom,qcs404-cdsp-pil",
> - "qcom,sdm845-adsp-pil"
> -
> -- reg:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: must specify the base address and size of the qdsp6ss register
> -
> -- interrupts-extended:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: must list the watchdog, fatal IRQs ready, handover and
> - stop-ack IRQs
> -
> -- interrupt-names:
> - Usage: required
> - Value type: <stringlist>
> - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
> -
> -- clocks:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: List of phandles and clock specifier pairs for the Hexagon,
> - per clock-names below.
> -
> -- clock-names:
> - Usage: required for SDM845 ADSP
> - Value type: <stringlist>
> - Definition: List of clock input name strings sorted in the same
> - order as the clocks property. Definition must have
> - "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
> - "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
> - and "qdsp6ss_core".
> -
> -- clock-names:
> - Usage: required for QCS404 CDSP
> - Value type: <stringlist>
> - Definition: List of clock input name strings sorted in the same
> - order as the clocks property. Definition must have
> - "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
> - "q6ss_master", "q6_axim".
> -
> -- power-domains:
> - Usage: required
> - Value type: <phandle>
> - Definition: reference to cx power domain node.
> -
> -- resets:
> - Usage: required
> - Value type: <phandle>
> - Definition: reference to the list of resets for the Hexagon.
> -
> -- reset-names:
> - Usage: required for SDM845 ADSP
> - Value type: <stringlist>
> - Definition: must be "pdc_sync" and "cc_lpass"
> -
> -- reset-names:
> - Usage: required for QCS404 CDSP
> - Value type: <stringlist>
> - Definition: must be "restart"
> -
> -- qcom,halt-regs:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: a phandle reference to a syscon representing TCSR followed
> - by the offset within syscon for Hexagon halt register.
> -
> -- memory-region:
> - Usage: required
> - Value type: <phandle>
> - Definition: reference to the reserved-memory for the firmware
> -
> -- qcom,smem-states:
> - Usage: required
> - Value type: <phandle>
> - Definition: reference to the smem state for requesting the Hexagon to
> - shut down
> -
> -- qcom,smem-state-names:
> - Usage: required
> - Value type: <stringlist>
> - Definition: must be "stop"
> -
> -
> -= SUBNODES
> -The adsp node may have an subnode named "glink-edge" that describes the
> -communication edge, channels and devices related to the Hexagon.
> -See ../soc/qcom/qcom,glink.txt for details on how to describe these.
> -
> -= EXAMPLE
> -The following example describes the resources needed to boot control the
> -ADSP, as it is found on SDM845 boards.
> -
> - remoteproc@17300000 {
> - compatible = "qcom,sdm845-adsp-pil";
> - reg = <0x17300000 0x40c>;
> -
> - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
> - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_LPASS_SWAY_CLK>,
> - <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> - <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> - <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> - <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> - <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> - clock-names = "xo", "sway_cbcr",
> - "lpass_ahbs_aon_cbcr",
> - "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> - "qdsp6ss_sleep", "qdsp6ss_core";
> -
> - power-domains = <&rpmhpd SDM845_CX>;
> -
> - resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> - <&aoss_reset AOSS_CC_LPASS_RESTART>;
> - reset-names = "pdc_sync", "cc_lpass";
> -
> - qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> -
> - memory-region = <&pil_adsp_mem>;
> -
> - qcom,smem-states = <&adsp_smp2p_out 0>;
> - qcom,smem-state-names = "stop";
> - };
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
> new file mode 100644
> index 0000000..b698bb7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
> @@ -0,0 +1,167 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-cdsp-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm QCS404 CDSP Peripheral Image Loader
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> + This document defines the binding for a component that loads and boots firmware
> + on the Qualcomm Technology Inc. CDSP.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,qcs404-cdsp-pil
> +
> + reg:
> + maxItems: 1
> + description:
> + The base address and size of the qdsp6ss register
> +
> + interrupts-extended:
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> +
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> +
> + clocks:
> + items:
> + - description: XO clock
> + - description: SWAY clock
> + - description: TBU clock
> + - description: BIMC clock
> + - description: AHB AON clock
> + - description: Q6SS SLAVE clock
> + - description: Q6SS MASTER clock
> + - description: Q6 AXIM clock
> +
> + clock-names:
> + items:
> + - const: xo
> + - const: sway
> + - const: tbu
> + - const: bimc
> + - const: ahb_aon
> + - const: q6ss_slave
> + - const: q6ss_master
> + - const: q6_axim
> +
> + power-domains:
> + items:
> + - description: CX power domain
> +
> + resets:
> + items:
> + - description: AOSS restart
> +
> + reset-names:
> + items:
> + - const: restart
> +
> + memory-region:
> + maxItems: 1
> + description: Reference to the reserved-memory for the Hexagon core
> +
> + qcom,halt-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + three offsets within syscon for q6, modem and nc halt registers.
> +
> + qcom,smem-states:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: States used by the AP to signal the Hexagon core
> + items:
> + - description: Stop the modem
> +
> + qcom,smem-state-names:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: The names of the state bits used for SMP2P output
> + items:
> + - const: stop
> +
> +required:
> + - compatible
> + - reg
> + - interrupts-extended
> + - interrupt-names
> + - clocks
> + - clock-names
> + - power-domains
> + - reset
> + - reset-names
> + - qcom,halt-regs
> + - memory-region
> + - qcom,smem-states
> + - qcom,smem-state-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-qcs404.h>
> + #include <dt-bindings/clock/qcom,turingcc-qcs404.h>
> + remoteproc@b00000 {
> + compatible = "qcom,qcs404-cdsp-pas";
Doesn't match the schema.
> + reg = <0x00b00000 0x4040>;
> +
> + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&xo_board>,
> + <&gcc GCC_CDSP_CFG_AHB_CLK>,
> + <&gcc GCC_CDSP_TBU_CLK>,
> + <&gcc GCC_BIMC_CDSP_CLK>,
> + <&turingcc TURING_WRAPPER_AON_CLK>,
> + <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
> + <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
> + <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
> + clock-names = "xo",
> + "sway",
> + "tbu",
> + "bimc",
> + "ahb_aon",
> + "q6ss_slave",
> + "q6ss_master",
> + "q6_axim";
> +
> + resets = <&gcc GCC_CDSP_RESTART>;
> + reset-names = "restart";
> +
> + qcom,halt-regs = <&tcsr 0x19004>;
> +
> + memory-region = <&cdsp_fw_mem>;
> +
> + qcom,smem-states = <&cdsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,remote-pid = <5>;
> + mboxes = <&apcs_glb 12>;
> +
> + label = "cdsp";
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
> new file mode 100644
> index 0000000..972671b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
> @@ -0,0 +1,160 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SDM845 ADSP Peripheral Image Loader
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> + This document defines the binding for a component that loads and boots firmware
> + on the Qualcomm Technology Inc. ADSP.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,sdm845-adsp-pil
> +
> + reg:
> + maxItems: 1
> + description:
> + The base address and size of the qdsp6ss register
> +
> + interrupts-extended:
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> +
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> +
> + clocks:
> + items:
> + - description: XO clock
> + - description: SWAY clock
> + - description: LPASS AHBS AON clock
> + - description: LPASS AHBM AON clock
> + - description: QDSP XO clock
> + - description: Q6SP6SS SLEEP clock
> + - description: Q6SP6SS CORE clock
> +
> + clock-names:
> + items:
> + - const: xo
> + - const: sway_cbcr
> + - const: lpass_ahbs_aon_cbcr
> + - const: lpass_ahbm_aon_cbcr
> + - const: qdsp6ss_xo
> + - const: qdsp6ss_sleep
> + - const: qdsp6ss_core
> +
> + power-domains:
> + items:
> + - description: CX power domain
> +
> + resets:
> + items:
> + - description: PDC AUDIO SYNC RESET
> + - description: CC LPASS restart
> +
> + reset-names:
> + items:
> + - const: pdc_sync
> + - const: cc_lpass
> +
> + memory-region:
> + maxItems: 1
> + description: Reference to the reserved-memory for the Hexagon core
> +
> + qcom,halt-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + three offsets within syscon for q6, modem and nc halt registers.
> +
> + qcom,smem-states:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: States used by the AP to signal the Hexagon core
> + items:
> + - description: Stop the modem
> +
> + qcom,smem-state-names:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: The names of the state bits used for SMP2P output
> + items:
> + - const: stop
> +
> +required:
> + - compatible
> + - reg
> + - interrupts-extended
> + - interrupt-names
> + - clocks
> + - clock-names
> + - power-domains
> + - resets
> + - reset-names
> + - qcom,halt-regs
> + - memory-region
> + - qcom,smem-states
> + - qcom,smem-state-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,rpmh.h>
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> + #include <dt-bindings/clock/qcom,lpass-sdm845.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> + #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> + #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> + remoteproc@17300000 {
> + compatible = "qcom,sdm845-adsp-pil";
> + reg = <0x17300000 0x40c>;
> +
> + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_LPASS_SWAY_CLK>,
> + <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> + <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> + <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> + <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> + <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> + clock-names = "xo", "sway_cbcr",
> + "lpass_ahbs_aon_cbcr",
> + "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> + "qdsp6ss_sleep", "qdsp6ss_core";
> +
> + power-domains = <&rpmhpd SDM845_CX>;
> +
> + resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> + <&aoss_reset AOSS_CC_LPASS_RESTART>;
> + reset-names = "pdc_sync", "cc_lpass";
> +
> + qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> + };
> --
> 2.7.4
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
2021-10-07 18:34 ` [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Stephen Boyd
@ 2021-10-28 13:08 ` pillair
2021-10-28 22:01 ` Stephen Boyd
0 siblings, 1 reply; 17+ messages in thread
From: pillair @ 2021-10-28 13:08 UTC (permalink / raw)
To: 'Stephen Boyd',
agross, bjorn.andersson, mathieu.poirier, ohad, p.zabel, robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
> -----Original Message-----
> From: Stephen Boyd <swboyd@chromium.org>
> Sent: Friday, October 8, 2021 12:05 AM
> To: Rakesh Pillai <pillair@codeaurora.org>; agross@kernel.org;
> bjorn.andersson@linaro.org; mathieu.poirier@linaro.org; ohad@wizery.com;
> p.zabel@pengutronix.de; robh+dt@kernel.org
> Cc: linux-arm-msm@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; sibis@codeaurora.org; mpubbise@codeaurora.org;
> kuabhs@chromium.org
> Subject: Re: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
>
> Quoting Rakesh Pillai (2021-10-03 23:48:50)
> > Add support for PIL loading of WPSS co-processor for SC7280 SOCs.
> >
> > Changes from v4/v5:
> > - Add yaml conversion for adsp/cdsp dt-bindings
> > - Change clock names in wpss dt-bindings
> > - Correct mistake in signed-off enail ID
>
> Can you keep a running tally here of the full progression of the series?
> That helps to look back and make sure we don't make a comment that has
> already been made before.
>
> One more request. Can you add support for 'firmware-name' like there is in
> Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt so that we
> can install firmware into some namespaced/versioned place instead of
> having to put wpss files into /lib/firmware?
Hi Stephen,
I have posted v7 with the support for firmware-name to be provided in the DT entry.
> It would also be nice to load a
> single firmware file instead of having to split the file into many pieces.
This would require lot of changes and lot of code duplication from request firmware.
Also the base ath11k firmware files have been posted as split files.
Thanks,
Rakesh Pillai
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
2021-10-12 1:18 ` Rob Herring
@ 2021-10-28 13:09 ` pillair
0 siblings, 0 replies; 17+ messages in thread
From: pillair @ 2021-10-28 13:09 UTC (permalink / raw)
To: 'Rob Herring'
Cc: agross, bjorn.andersson, ohad, mathieu.poirier, p.zabel, swboyd,
linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: Tuesday, October 12, 2021 6:49 AM
> To: Rakesh Pillai <pillair@codeaurora.org>
> Cc: agross@kernel.org; bjorn.andersson@linaro.org; ohad@wizery.com;
> mathieu.poirier@linaro.org; p.zabel@pengutronix.de;
> swboyd@chromium.org; linux-arm-msm@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> sibis@codeaurora.org; mpubbise@codeaurora.org; kuabhs@chromium.org
> Subject: Re: [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert
> binding to YAML
>
> On Mon, Oct 04, 2021 at 12:18:51PM +0530, Rakesh Pillai wrote:
> > Convert Qualcomm ADSP/CDSP Remoteproc devicetree binding to YAML.
> >
> > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> > ---
> > .../bindings/remoteproc/qcom,hexagon-v56.txt | 140
-----------------
> > .../bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml | 167
> > +++++++++++++++++++++
> > .../bindings/remoteproc/qcom,sdm845-adsp-pil.yaml | 160
> > ++++++++++++++++++++
> > 3 files changed, 327 insertions(+), 140 deletions(-) delete mode
> > 100644
> > Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
> > create mode 100644
> > Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-
> pil.yaml
> > create mode 100644
> > Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-
> pil.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-
> v56.txt
> > b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-
> v56.txt
> > deleted file mode 100644
> > index 1337a3d..0000000
> > ---
> > a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-
> v56.txt
> > +++ /dev/null
> > @@ -1,140 +0,0 @@
> > -Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
> > -
> > -This document defines the binding for a component that loads and
> > boots firmware -on the Qualcomm Technology Inc. Hexagon v56 core.
> > -
> > -- compatible:
> > - Usage: required
> > - Value type: <string>
> > - Definition: must be one of:
> > - "qcom,qcs404-cdsp-pil",
> > - "qcom,sdm845-adsp-pil"
> > -
> > -- reg:
> > - Usage: required
> > - Value type: <prop-encoded-array>
> > - Definition: must specify the base address and size of the qdsp6ss
> register
> > -
> > -- interrupts-extended:
> > - Usage: required
> > - Value type: <prop-encoded-array>
> > - Definition: must list the watchdog, fatal IRQs ready, handover and
> > - stop-ack IRQs
> > -
> > -- interrupt-names:
> > - Usage: required
> > - Value type: <stringlist>
> > - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
> > -
> > -- clocks:
> > - Usage: required
> > - Value type: <prop-encoded-array>
> > - Definition: List of phandles and clock specifier pairs for the
Hexagon,
> > - per clock-names below.
> > -
> > -- clock-names:
> > - Usage: required for SDM845 ADSP
> > - Value type: <stringlist>
> > - Definition: List of clock input name strings sorted in the same
> > - order as the clocks property. Definition must have
> > - "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
> > - "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
> > - and "qdsp6ss_core".
> > -
> > -- clock-names:
> > - Usage: required for QCS404 CDSP
> > - Value type: <stringlist>
> > - Definition: List of clock input name strings sorted in the same
> > - order as the clocks property. Definition must have
> > - "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
> > - "q6ss_master", "q6_axim".
> > -
> > -- power-domains:
> > - Usage: required
> > - Value type: <phandle>
> > - Definition: reference to cx power domain node.
> > -
> > -- resets:
> > - Usage: required
> > - Value type: <phandle>
> > - Definition: reference to the list of resets for the Hexagon.
> > -
> > -- reset-names:
> > - Usage: required for SDM845 ADSP
> > - Value type: <stringlist>
> > - Definition: must be "pdc_sync" and "cc_lpass"
> > -
> > -- reset-names:
> > - Usage: required for QCS404 CDSP
> > - Value type: <stringlist>
> > - Definition: must be "restart"
> > -
> > -- qcom,halt-regs:
> > - Usage: required
> > - Value type: <prop-encoded-array>
> > - Definition: a phandle reference to a syscon representing TCSR
> followed
> > - by the offset within syscon for Hexagon halt register.
> > -
> > -- memory-region:
> > - Usage: required
> > - Value type: <phandle>
> > - Definition: reference to the reserved-memory for the firmware
> > -
> > -- qcom,smem-states:
> > - Usage: required
> > - Value type: <phandle>
> > - Definition: reference to the smem state for requesting the Hexagon
> to
> > - shut down
> > -
> > -- qcom,smem-state-names:
> > - Usage: required
> > - Value type: <stringlist>
> > - Definition: must be "stop"
> > -
> > -
> > -= SUBNODES
> > -The adsp node may have an subnode named "glink-edge" that describes
> > the -communication edge, channels and devices related to the Hexagon.
> > -See ../soc/qcom/qcom,glink.txt for details on how to describe these.
> > -
> > -= EXAMPLE
> > -The following example describes the resources needed to boot control
> > the -ADSP, as it is found on SDM845 boards.
> > -
> > - remoteproc@17300000 {
> > - compatible = "qcom,sdm845-adsp-pil";
> > - reg = <0x17300000 0x40c>;
> > -
> > - interrupts-extended = <&intc GIC_SPI 162
> IRQ_TYPE_EDGE_RISING>,
> > - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> > - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> > - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> > - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> > - interrupt-names = "wdog", "fatal", "ready",
> > - "handover", "stop-ack";
> > -
> > - clocks = <&rpmhcc RPMH_CXO_CLK>,
> > - <&gcc GCC_LPASS_SWAY_CLK>,
> > - <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> > - <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> > - <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> > - <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> > - <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> > - clock-names = "xo", "sway_cbcr",
> > - "lpass_ahbs_aon_cbcr",
> > - "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> > - "qdsp6ss_sleep", "qdsp6ss_core";
> > -
> > - power-domains = <&rpmhpd SDM845_CX>;
> > -
> > - resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> > - <&aoss_reset AOSS_CC_LPASS_RESTART>;
> > - reset-names = "pdc_sync", "cc_lpass";
> > -
> > - qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> > -
> > - memory-region = <&pil_adsp_mem>;
> > -
> > - qcom,smem-states = <&adsp_smp2p_out 0>;
> > - qcom,smem-state-names = "stop";
> > - };
> > diff --git
> > a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-
> pil.ya
> > ml
> > b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-
> pil.ya
> > ml
> > new file mode 100644
> > index 0000000..b698bb7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-
> cdsp-pi
> > +++ l.yaml
> > @@ -0,0 +1,167 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/remoteproc/qcom,qcs404-cdsp-pil.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm QCS404 CDSP Peripheral Image Loader
> > +
> > +maintainers:
> > + - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +description:
> > + This document defines the binding for a component that loads and
> > +boots firmware
> > + on the Qualcomm Technology Inc. CDSP.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - qcom,qcs404-cdsp-pil
> > +
> > + reg:
> > + maxItems: 1
> > + description:
> > + The base address and size of the qdsp6ss register
> > +
> > + interrupts-extended:
> > + items:
> > + - description: Watchdog interrupt
> > + - description: Fatal interrupt
> > + - description: Ready interrupt
> > + - description: Handover interrupt
> > + - description: Stop acknowledge interrupt
> > +
> > + interrupt-names:
> > + items:
> > + - const: wdog
> > + - const: fatal
> > + - const: ready
> > + - const: handover
> > + - const: stop-ack
> > +
> > + clocks:
> > + items:
> > + - description: XO clock
> > + - description: SWAY clock
> > + - description: TBU clock
> > + - description: BIMC clock
> > + - description: AHB AON clock
> > + - description: Q6SS SLAVE clock
> > + - description: Q6SS MASTER clock
> > + - description: Q6 AXIM clock
> > +
> > + clock-names:
> > + items:
> > + - const: xo
> > + - const: sway
> > + - const: tbu
> > + - const: bimc
> > + - const: ahb_aon
> > + - const: q6ss_slave
> > + - const: q6ss_master
> > + - const: q6_axim
> > +
> > + power-domains:
> > + items:
> > + - description: CX power domain
> > +
> > + resets:
> > + items:
> > + - description: AOSS restart
> > +
> > + reset-names:
> > + items:
> > + - const: restart
> > +
> > + memory-region:
> > + maxItems: 1
> > + description: Reference to the reserved-memory for the Hexagon
> > + core
> > +
> > + qcom,halt-regs:
> > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > + description:
> > + Phandle reference to a syscon representing TCSR followed by the
> > + three offsets within syscon for q6, modem and nc halt registers.
> > +
> > + qcom,smem-states:
> > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > + description: States used by the AP to signal the Hexagon core
> > + items:
> > + - description: Stop the modem
> > +
> > + qcom,smem-state-names:
> > + $ref: /schemas/types.yaml#/definitions/string
> > + description: The names of the state bits used for SMP2P output
> > + items:
> > + - const: stop
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts-extended
> > + - interrupt-names
> > + - clocks
> > + - clock-names
> > + - power-domains
> > + - reset
> > + - reset-names
> > + - qcom,halt-regs
> > + - memory-region
> > + - qcom,smem-states
> > + - qcom,smem-state-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/qcom,gcc-qcs404.h>
> > + #include <dt-bindings/clock/qcom,turingcc-qcs404.h>
> > + remoteproc@b00000 {
> > + compatible = "qcom,qcs404-cdsp-pas";
>
> Doesn't match the schema.
Hi Rob,
I have fixed this and posted v7.
Thanks,
Rakesh Pillai
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
2021-10-28 13:08 ` pillair
@ 2021-10-28 22:01 ` Stephen Boyd
2021-10-29 6:21 ` pillair
0 siblings, 1 reply; 17+ messages in thread
From: Stephen Boyd @ 2021-10-28 22:01 UTC (permalink / raw)
To: agross, bjorn.andersson, mathieu.poirier, ohad, p.zabel, pillair,
robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
Quoting pillair@codeaurora.org (2021-10-28 06:08:39)
>
>
> > -----Original Message-----
> > From: Stephen Boyd <swboyd@chromium.org>
> > Sent: Friday, October 8, 2021 12:05 AM
> > To: Rakesh Pillai <pillair@codeaurora.org>; agross@kernel.org;
> > bjorn.andersson@linaro.org; mathieu.poirier@linaro.org; ohad@wizery.com;
> > p.zabel@pengutronix.de; robh+dt@kernel.org
> > Cc: linux-arm-msm@vger.kernel.org; devicetree@vger.kernel.org; linux-
> > kernel@vger.kernel.org; sibis@codeaurora.org; mpubbise@codeaurora.org;
> > kuabhs@chromium.org
> > Subject: Re: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
> >
> > Quoting Rakesh Pillai (2021-10-03 23:48:50)
> > > Add support for PIL loading of WPSS co-processor for SC7280 SOCs.
> > >
> > > Changes from v4/v5:
> > > - Add yaml conversion for adsp/cdsp dt-bindings
> > > - Change clock names in wpss dt-bindings
> > > - Correct mistake in signed-off enail ID
> >
> > Can you keep a running tally here of the full progression of the series?
> > That helps to look back and make sure we don't make a comment that has
> > already been made before.
> >
> > One more request. Can you add support for 'firmware-name' like there is in
> > Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt so that we
> > can install firmware into some namespaced/versioned place instead of
> > having to put wpss files into /lib/firmware?
>
> Hi Stephen,
> I have posted v7 with the support for firmware-name to be provided in the DT entry.
Thanks. I didn't see it in my inbox. No Cc for me?
>
> > It would also be nice to load a
> > single firmware file instead of having to split the file into many pieces.
>
> This would require lot of changes and lot of code duplication from request firmware.
> Also the base ath11k firmware files have been posted as split files.
>
Other firmwares have done it so it seems technically possible. So
nothing is preventing it?
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
2021-10-28 22:01 ` Stephen Boyd
@ 2021-10-29 6:21 ` pillair
2021-10-29 6:34 ` Stephen Boyd
0 siblings, 1 reply; 17+ messages in thread
From: pillair @ 2021-10-29 6:21 UTC (permalink / raw)
To: 'Stephen Boyd',
agross, bjorn.andersson, mathieu.poirier, ohad, p.zabel, robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
> -----Original Message-----
> From: Stephen Boyd <swboyd@chromium.org>
> Sent: Friday, October 29, 2021 3:32 AM
> To: agross@kernel.org; bjorn.andersson@linaro.org;
> mathieu.poirier@linaro.org; ohad@wizery.com; p.zabel@pengutronix.de;
> pillair@codeaurora.org; robh+dt@kernel.org
> Cc: linux-arm-msm@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; sibis@codeaurora.org; mpubbise@codeaurora.org;
> kuabhs@chromium.org
> Subject: RE: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
>
> Quoting pillair@codeaurora.org (2021-10-28 06:08:39)
> >
> >
> > > -----Original Message-----
> > > From: Stephen Boyd <swboyd@chromium.org>
> > > Sent: Friday, October 8, 2021 12:05 AM
> > > To: Rakesh Pillai <pillair@codeaurora.org>; agross@kernel.org;
> > > bjorn.andersson@linaro.org; mathieu.poirier@linaro.org;
> > > ohad@wizery.com; p.zabel@pengutronix.de; robh+dt@kernel.org
> > > Cc: linux-arm-msm@vger.kernel.org; devicetree@vger.kernel.org;
> > > linux- kernel@vger.kernel.org; sibis@codeaurora.org;
> > > mpubbise@codeaurora.org; kuabhs@chromium.org
> > > Subject: Re: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
> > >
> > > Quoting Rakesh Pillai (2021-10-03 23:48:50)
> > > > Add support for PIL loading of WPSS co-processor for SC7280 SOCs.
> > > >
> > > > Changes from v4/v5:
> > > > - Add yaml conversion for adsp/cdsp dt-bindings
> > > > - Change clock names in wpss dt-bindings
> > > > - Correct mistake in signed-off enail ID
> > >
> > > Can you keep a running tally here of the full progression of the series?
> > > That helps to look back and make sure we don't make a comment that
> > > has already been made before.
> > >
> > > One more request. Can you add support for 'firmware-name' like there
> > > is in Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt so
> > > that we can install firmware into some namespaced/versioned place
> > > instead of having to put wpss files into /lib/firmware?
> >
> > Hi Stephen,
> > I have posted v7 with the support for firmware-name to be provided in the
> DT entry.
>
> Thanks. I didn't see it in my inbox. No Cc for me?
>
> >
> > > It would also be nice to load a
> > > single firmware file instead of having to split the file into many pieces.
> >
> > This would require lot of changes and lot of code duplication from request
> firmware.
> > Also the base ath11k firmware files have been posted as split files.
> >
>
> Other firmwares have done it so it seems technically possible. So nothing is
> preventing it?
Yes it should be possible.
I can probably add that support and post it as a different patch series, so as to
not club it with the current patch series. Does that sound okay ?
Thanks,
Rakesh Pillai.
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading
2021-10-29 6:21 ` pillair
@ 2021-10-29 6:34 ` Stephen Boyd
0 siblings, 0 replies; 17+ messages in thread
From: Stephen Boyd @ 2021-10-29 6:34 UTC (permalink / raw)
To: agross, bjorn.andersson, mathieu.poirier, ohad, p.zabel, pillair,
robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, sibis, mpubbise, kuabhs
Quoting pillair@codeaurora.org (2021-10-28 23:21:49)
> >
> > Other firmwares have done it so it seems technically possible. So nothing is
> > preventing it?
>
> Yes it should be possible.
> I can probably add that support and post it as a different patch series, so as to
> not club it with the current patch series. Does that sound okay ?
>
Yes
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2021-10-29 6:34 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-04 6:48 [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-10-04 6:48 ` [PATCH v6 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
2021-10-04 18:30 ` Stephen Boyd
2021-10-12 1:18 ` Rob Herring
2021-10-28 13:09 ` pillair
2021-10-04 6:48 ` [PATCH v6 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
2021-10-04 12:21 ` Rob Herring
2021-10-06 5:09 ` pillair
2021-10-06 7:09 ` Stephen Boyd
2021-10-06 16:56 ` pillair
2021-10-04 6:48 ` [PATCH v6 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai
2021-10-04 18:35 ` Stephen Boyd
2021-10-07 18:34 ` [PATCH v6 0/3] Add support for sc7280 WPSS PIL loading Stephen Boyd
2021-10-28 13:08 ` pillair
2021-10-28 22:01 ` Stephen Boyd
2021-10-29 6:21 ` pillair
2021-10-29 6:34 ` Stephen Boyd
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.