All of lore.kernel.org
 help / color / mirror / Atom feed
From: Prasad Malisetty <pmaliset@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	bhelgaas@google.com, robh+dt@kernel.org, swboyd@chromium.org,
	lorenzo.pieralisi@arm.com, svarbanov@mm-sol.com
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	dianders@chromium.org, mka@chromium.org, vbadigan@codeaurora.org,
	sallenki@codeaurora.org, manivannan.sadhasivam@linaro.org,
	linux-pci@vger.kernel.org,
	Prasad Malisetty <pmaliset@codeaurora.org>
Subject: [PATCH v12 2/5] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
Date: Thu,  7 Oct 2021 23:18:40 +0530	[thread overview]
Message-ID: <1633628923-25047-3-git-send-email-pmaliset@codeaurora.org> (raw)
In-Reply-To: <1633628923-25047-1-git-send-email-pmaliset@codeaurora.org>

Add PCIe controller and PHY nodes for sc7280 SOC.

Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 118 +++++++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 39635da..cde814f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1563,6 +1563,117 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sc7280";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+				 <&pcie1_lane 0>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>;
+
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_clkreq_n>;
+
+			iommus = <&apps_smmu 0x1c80 0x1>;
+
+			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: lanes@1c0e200 {
+				reg = <0 0x01c0e200 0 0x170>,
+				      <0 0x01c0e400 0 0x200>,
+				      <0 0x01c0ea00 0 0x1f0>,
+				      <0 0x01c0e600 0 0x170>,
+				      <0 0x01c0e800 0 0x200>,
+				      <0 0x01c0ee00 0 0xf4>;
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7280-ipa";
 
@@ -2676,6 +2787,13 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			pcie1_clkreq_n: pcie1-clkreq-n {
+				pins = "gpio79";
+				function = "pcie1_clkreqn";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			qspi_clk: qspi-clk {
 				pins = "gpio14";
 				function = "qspi_clk";
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2021-10-07 17:49 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-07 17:48 [PATCH v12 0/5] Add DT bindings and DT nodes for PCIe and PHY in SC7280 Prasad Malisetty
2021-10-07 17:48 ` [PATCH v12 1/5] dt-bindings: pci: qcom: Document PCIe bindings for SC7280 Prasad Malisetty
2021-10-28 22:02   ` Stephen Boyd
2021-10-07 17:48 ` Prasad Malisetty [this message]
2021-10-26 12:42   ` [PATCH v12 2/5] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes Dmitry Baryshkov
2021-10-07 17:48 ` [PATCH v12 3/5] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board Prasad Malisetty
2021-10-07 18:01   ` Stephen Boyd
2021-10-07 17:48 ` [PATCH v12 4/5] PCI: qcom: Add a flag in match data along with ops Prasad Malisetty
2021-10-07 18:03   ` Stephen Boyd
2021-10-08  1:59     ` Prasad Malisetty
2021-10-12 14:11       ` Lorenzo Pieralisi
2021-10-12 17:49         ` Prasad Malisetty
2021-10-07 17:48 ` [PATCH v12 5/5] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280 Prasad Malisetty
2021-10-07 19:13   ` Bjorn Helgaas
2021-10-13 10:00 ` [PATCH v12 0/5] Add DT bindings and DT nodes for PCIe and PHY " Lorenzo Pieralisi
2021-10-13 17:27   ` Prasad Malisetty
2021-10-15 19:43   ` Stephen Boyd
2021-10-18 21:57     ` Doug Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1633628923-25047-3-git-send-email-pmaliset@codeaurora.org \
    --to=pmaliset@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=sallenki@codeaurora.org \
    --cc=svarbanov@mm-sol.com \
    --cc=swboyd@chromium.org \
    --cc=vbadigan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.