All of lore.kernel.org
 help / color / mirror / Atom feed
From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com, bjorn.andersson@linaro.org
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
	linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
	rjliao@codeaurora.org, hbandi@codeaurora.org,
	abhishekpandit@chromium.org, mcchou@chromium.org,
	saluvala@codeaurora.org
Subject: [PATCH v4] arm64: dts: qcom: sc7280: Add bluetooth node on SC7280 IDP boards
Date: Wed, 15 Dec 2021 22:36:03 +0530	[thread overview]
Message-ID: <1639587963-22503-1-git-send-email-bgodavar@codeaurora.org> (raw)

Add bluetooth SoC WCN6750 node for SC7280 IDP boards.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
v4:
  * updated commit subject
  * Removed drive strength for bt_en
  * updated swctrl_gpio name to sw_ctrl

v3:
  * Addressed reviewers comments
  * Added pin config for sw_ctrl line.
v2:
  * merged two patches into one
  * Removed unused comments
  * Removed pinmux & pin conf.
  * Addressed reviewers comments

v1: initial patch
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts  |  4 ++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 36 ++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp2.dts |  4 ++++
 3 files changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 9b991ba..19bd228 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -56,6 +56,10 @@
 	};
 };
 
+&bluetooth {
+	vddio-supply = <&vreg_l19b_1p8>;
+};
+
 &ipa {
 	status = "okay";
 	modem-init;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71..a146d0d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -14,6 +14,11 @@
 #include "pmk8350.dtsi"
 
 / {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial1 = &uart7;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -422,6 +427,23 @@
 				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en>, <&sw_ctrl>;
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vddaon-supply = <&vreg_s7b_0p9>;
+		vddbtcxmx-supply = <&vreg_s7b_0p9>;
+		vddrfacmn-supply = <&vreg_s7b_0p9>;
+		vddrfa0p8-supply = <&vreg_s7b_0p9>;
+		vddrfa1p7-supply = <&vreg_s1b_1p8>;
+		vddrfa1p2-supply = <&vreg_s8b_1p2>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		max-speed = <3200000>;
+	};
 };
 
 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
@@ -491,6 +513,13 @@
 };
 
 &tlmm {
+	bt_en: bt-en {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
 	nvme_pwren: nvme-pwren {
 		function = "gpio";
 	};
@@ -554,6 +583,13 @@
 		 */
 		bias-pull-up;
 	};
+
+	sw_ctrl: sw-ctrl {
+		pins = "gpio86";
+		function = "gpio";
+		input-enable;
+		bias-pull-down;
+	};
 };
 
 &sdc1_on {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
index 0382c77..73b9911 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -23,6 +23,10 @@
 	};
 };
 
+&bluetooth {
+	vddio-supply = <&vreg_l18b_1p8>;
+};
+
 &nvme_pwren {
 	pins = "gpio51";
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


             reply	other threads:[~2021-12-15 17:07 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-15 17:06 Balakrishna Godavarthi [this message]
2021-12-15 17:57 ` [PATCH v4] arm64: dts: qcom: sc7280: Add bluetooth node on SC7280 IDP boards Matthias Kaehlcke
2021-12-22  7:54 ` Marcel Holtmann
2021-12-22 16:13   ` Matthias Kaehlcke
2021-12-22 16:41     ` Bjorn Andersson
2021-12-22 22:02       ` Marcel Holtmann
2021-12-24 18:10 ` Bjorn Andersson
2022-01-13 23:59   ` Doug Anderson
2022-01-25  4:49     ` Miao-chen Chou
2022-01-31 21:09       ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1639587963-22503-1-git-send-email-bgodavar@codeaurora.org \
    --to=bgodavar@codeaurora.org \
    --cc=abhishekpandit@chromium.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=hbandi@codeaurora.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mcchou@chromium.org \
    --cc=mka@chromium.org \
    --cc=rjliao@codeaurora.org \
    --cc=saluvala@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.