From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
<robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
<dianders@chromium.org>, <swboyd@chromium.org>,
<judyhsiao@chromium.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
"Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v8 2/4] arm64: dts: qcom: sc7280: Add nodes for wcd9385 and max98360a codec
Date: Mon, 18 Apr 2022 19:44:10 +0530 [thread overview]
Message-ID: <1650291252-30398-3-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1650291252-30398-1-git-send-email-quic_srivasam@quicinc.com>
Add wcd938x and max98360a codecs for audio use case on
sc7280 based platforms.
Add tlmm gpio property in wcd938x node for switching CTIA/OMTP Headset.
Add amp_en node for max98360a codec.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 6 ++
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 97 ++++++++++++++++++++++++++
3 files changed, 111 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 344338a..aa0bf6e2 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -87,6 +87,12 @@ ap_ts_pen_1v8: &i2c13 {
pins = "gpio51";
};
+&wcd938x {
+ pinctrl-names = "default";
+ pinctrl-0 = <&us_euro_hs_sel>;
+ us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
&tlmm {
tp_int_odl: tp-int-odl {
pins = "gpio7";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index d58045d..f247403 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -20,6 +20,14 @@
#include "sc7280-chrome-common.dtsi"
/ {
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&_en>;
+ sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2f863c0..8dad599 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -20,6 +20,42 @@
serial1 = &uart7;
};
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&_en>;
+ sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+ wcd938x: audio-codec-1 {
+ compatible = "qcom,wcd9385-codec";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wcd_reset_n>;
+ pinctrl-1 = <&wcd_reset_n_sleep>;
+
+ reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ vdd-rxtx-supply = <&vreg_l18b_1p8>;
+ vdd-io-supply = <&vreg_l18b_1p8>;
+ vdd-buck-supply = <&vreg_l17b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+ 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ #sound-dai-cells = <1>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
@@ -238,6 +274,19 @@
modem-init;
};
+&lpass_rx_macro {
+ status = "okay";
+};
+
+&lpass_tx_macro {
+ status = "okay";
+};
+
+&lpass_va_macro {
+ status = "okay";
+ vdd-micb-supply = <&vreg_bob>;
+};
+
&pcie1 {
status = "okay";
perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
@@ -298,6 +347,26 @@
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};
+&swr0 {
+ status = "okay";
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ #sound-dai-cells = <1>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ #sound-dai-cells = <1>;
+ qcom,tx-port-mapping = <1 2 3 4>;
+ };
+};
+
&uart5 {
compatible = "qcom,geni-debug-uart";
status = "okay";
@@ -561,6 +630,12 @@
};
&tlmm {
+ amp_en: amp-en {
+ pins = "gpio63";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
bt_en: bt-en {
pins = "gpio85";
function = "gpio";
@@ -643,6 +718,28 @@
function = "gpio";
bias-pull-down;
};
+
+ us_euro_hs_sel: us-euro-hs-sel {
+ pins = "gpio81";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ wcd_reset_n: wcd-reset-n {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ wcd_reset_n_sleep: wcd-reset-n-sleep {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ output-low;
+ };
};
&remoteproc_wpss {
--
2.7.4
next prev parent reply other threads:[~2022-04-18 15:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-18 14:14 [PATCH v8 0/4] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-04-18 14:14 ` [PATCH v8 1/4] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-04-18 16:03 ` Matthias Kaehlcke
2022-04-18 14:14 ` Srinivasa Rao Mandadapu [this message]
2022-04-18 16:45 ` [PATCH v8 2/4] arm64: dts: qcom: sc7280: Add nodes for wcd9385 and max98360a codec Matthias Kaehlcke
2022-04-19 11:24 ` Srinivasa Rao Mandadapu
2022-04-21 7:01 ` Srinivasa Rao Mandadapu
2022-04-21 15:42 ` Matthias Kaehlcke
2022-04-22 13:26 ` Srinivasa Rao Mandadapu
2022-04-18 14:14 ` [PATCH v8 3/4] arm64: dts: qcom: sc7280: Add lpass cpu node Srinivasa Rao Mandadapu
2022-04-18 14:14 ` [PATCH v8 4/4] arm64: dts: qcom: sc7280: Add dt nodes for sound card Srinivasa Rao Mandadapu
2022-04-18 18:02 ` Matthias Kaehlcke
2022-04-19 11:28 ` Srinivasa Rao Mandadapu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1650291252-30398-3-git-send-email-quic_srivasam@quicinc.com \
--to=quic_srivasam@quicinc.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=judyhsiao@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_potturu@quicinc.com \
--cc=quic_rohkumar@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.