[PATCH 0/4] Add QPIC BAM and QPIC NAND devicetree support for SDX65

[PATCH 0/4] Add QPIC BAM and QPIC NAND devicetree support for SDX65

[Kaushal Kumar]

Hello,

This series adds and enables devicetree nodes for QPIC BAM
and QPIC NAND for Qualcomm SDX65 platform.

Kaushal Kumar (4):
  ARM: dts: qcom: sdx65: Add QPIC BAM support
  ARM: dts: qcom: sdx65: Add QPIC NAND support
  ARM: dts: qcom: sdx65-mtp: Enable QPIC BAM support
  ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support

 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 19 +++++++++++++++++++
 arch/arm/boot/dts/qcom-sdx65.dtsi    | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+)

--
2.7.4

[PATCH 1/4] ARM: dts: qcom: sdx65: Add QPIC BAM support

[Kaushal Kumar]

Add devicetree node to enable support for QPIC
BAM DMA controller on Qualcomm SDX65 platform.

Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index a64be20..d6a6087 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -199,6 +199,18 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		qpic_bam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x01b04000 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x01f40000 0x40000>;
-- 
2.7.4

[PATCH 2/4] ARM: dts: qcom: sdx65: Add QPIC NAND support

[Kaushal Kumar]

Add devicetree node to enable support for QPIC
NAND controller on Qualcomm SDX65 platform.
Since there is no "aon" clock in SDX65, a dummy
clock is provided.

Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index d6a6087..a75e9f1 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -37,6 +37,12 @@
 			clock-output-names = "sleep_clk";
 			#clock-cells = <0>;
 		};
+
+		nand_clk_dummy: nand-clk-dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
 	};
 
 	cpus {
@@ -211,6 +217,22 @@
 			status = "disabled";
 		};
 
+		qpic_nand: nand-controller@1b30000 {
+			compatible = "qcom,sdx55-nand";
+			reg = <0x01b30000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&nand_clk_dummy>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x01f40000 0x40000>;
-- 
2.7.4

[PATCH 3/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC BAM support

[Kaushal Kumar]

Enable QPIC BAM devicetree node for Qualcomm SDX65-MTP board.

Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 6920524..5c5fcb0 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -68,6 +68,10 @@
 	status = "ok";
 };
 
+&qpic_bam {
+	status = "ok";
+};
+
 &apps_rsc {
 	pmx65-rpmh-regulators {
 		compatible = "qcom,pmx65-rpmh-regulators";
-- 
2.7.4

[PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support

[Kaushal Kumar]

Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board.

Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 5c5fcb0..3628104 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -72,6 +72,21 @@
 	status = "ok";
 };
 
+&qpic_nand {
+	status = "ok";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* ico and efs2 partitions are secured */
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
+	};
+};
+
 &apps_rsc {
 	pmx65-rpmh-regulators {
 		compatible = "qcom,pmx65-rpmh-regulators";
-- 
2.7.4

Re: [PATCH 1/4] ARM: dts: qcom: sdx65: Add QPIC BAM support

[Manivannan Sadhasivam]

On Sat, Apr 30, 2022 at 08:30:07AM -0700, Kaushal Kumar wrote:
> Add devicetree node to enable support for QPIC
> BAM DMA controller on Qualcomm SDX65 platform.
> 
> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  arch/arm/boot/dts/qcom-sdx65.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
> index a64be20..d6a6087 100644
> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
> @@ -199,6 +199,18 @@
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
> +		qpic_bam: dma-controller@1b04000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x01b04000 0x1c000>;
> +			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rpmhcc RPMH_QPIC_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +			qcom,controlled-remotely;
> +			status = "disabled";
> +		};
> +
>  		tcsr_mutex: hwlock@1f40000 {
>  			compatible = "qcom,tcsr-mutex";
>  			reg = <0x01f40000 0x40000>;
> -- 
> 2.7.4
> 

Re: [PATCH 2/4] ARM: dts: qcom: sdx65: Add QPIC NAND support

[Manivannan Sadhasivam]

On Sat, Apr 30, 2022 at 08:30:08AM -0700, Kaushal Kumar wrote:
> Add devicetree node to enable support for QPIC
> NAND controller on Qualcomm SDX65 platform.
> Since there is no "aon" clock in SDX65, a dummy
> clock is provided.
> 
> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  arch/arm/boot/dts/qcom-sdx65.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
> index d6a6087..a75e9f1 100644
> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
> @@ -37,6 +37,12 @@
>  			clock-output-names = "sleep_clk";
>  			#clock-cells = <0>;
>  		};
> +
> +		nand_clk_dummy: nand-clk-dummy {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32764>;
> +			#clock-cells = <0>;
> +		};
>  	};
>  
>  	cpus {
> @@ -211,6 +217,22 @@
>  			status = "disabled";
>  		};
>  
> +		qpic_nand: nand-controller@1b30000 {
> +			compatible = "qcom,sdx55-nand";
> +			reg = <0x01b30000 0x10000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			clocks = <&rpmhcc RPMH_QPIC_CLK>,
> +				 <&nand_clk_dummy>;
> +			clock-names = "core", "aon";
> +
> +			dmas = <&qpic_bam 0>,
> +			       <&qpic_bam 1>,
> +			       <&qpic_bam 2>;
> +			dma-names = "tx", "rx", "cmd";
> +			status = "disabled";
> +		};
> +
>  		tcsr_mutex: hwlock@1f40000 {
>  			compatible = "qcom,tcsr-mutex";
>  			reg = <0x01f40000 0x40000>;
> -- 
> 2.7.4
> 

Re: [PATCH 3/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC BAM support

[Manivannan Sadhasivam]

On Sat, Apr 30, 2022 at 08:30:09AM -0700, Kaushal Kumar wrote:
> Enable QPIC BAM devicetree node for Qualcomm SDX65-MTP board.
> 
> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
> ---
>  arch/arm/boot/dts/qcom-sdx65-mtp.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> index 6920524..5c5fcb0 100644
> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> @@ -68,6 +68,10 @@
>  	status = "ok";
>  };
>  
> +&qpic_bam {

Nodes need to be sorted in alphabetical order.

Thanks,
Mani

> +	status = "ok";
> +};
> +
>  &apps_rsc {
>  	pmx65-rpmh-regulators {
>  		compatible = "qcom,pmx65-rpmh-regulators";
> -- 
> 2.7.4
> 

Re: [PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support

[Manivannan Sadhasivam]

On Sat, Apr 30, 2022 at 08:30:10AM -0700, Kaushal Kumar wrote:
> Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board.
> 
> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
> ---
>  arch/arm/boot/dts/qcom-sdx65-mtp.dts | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> index 5c5fcb0..3628104 100644
> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> @@ -72,6 +72,21 @@
>  	status = "ok";
>  };
>  
> +&qpic_nand {

Nodes need to be sorted in alphabetical order.

Thanks,
Mani

> +	status = "ok";
> +
> +	nand@0 {
> +		reg = <0>;
> +
> +		nand-ecc-strength = <4>;
> +		nand-ecc-step-size = <512>;
> +		nand-bus-width = <8>;
> +		/* ico and efs2 partitions are secured */
> +		secure-regions = /bits/ 64 <0x500000 0x500000
> +					    0xa00000 0xb00000>;
> +	};
> +};
> +
>  &apps_rsc {
>  	pmx65-rpmh-regulators {
>  		compatible = "qcom,pmx65-rpmh-regulators";
> -- 
> 2.7.4
>