[PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Peter Geis]

Good Morning,

Apologies Heiko on taking so long for this v2.

This patch series adds support for the Pine64 touch panel to the
rockpro64 single board computer.
This panel attaches to the dsi port and includes an i2c touch screen.

The first two patches involve making the reset pin to the Feiyang
fy07024di26a30d panel optional. On the rockpro64 and quartz64-a this pin
is tied to dvdd and automatically comes high when power is applied.
The third patch adds the device tree nodes to rockpro64 to permit the
panel to be used.

Changelog:
v2:
- Drop patch 4 so we don't "enable" the nodes
- Drop the unnecessary null checks
- Rebase to 5.18-rc1

Peter Geis (3):
  dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio
    optional
  drm/panel: feiyang-fy07024di26a30d: make reset gpio optional
  arm64: dts: rockchip: add pine64 touch panel display to rockpro64

 .../panel/feiyang,fy07024di26a30d.yaml        |  1 -
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 80 ++++++++++++++++++-
 .../drm/panel/panel-feiyang-fy07024di26a30d.c |  2 +-
 3 files changed, 77 insertions(+), 6 deletions(-)

-- 
2.25.1

[PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Peter Geis]

Good Morning,

Apologies Heiko on taking so long for this v2.

This patch series adds support for the Pine64 touch panel to the
rockpro64 single board computer.
This panel attaches to the dsi port and includes an i2c touch screen.

The first two patches involve making the reset pin to the Feiyang
fy07024di26a30d panel optional. On the rockpro64 and quartz64-a this pin
is tied to dvdd and automatically comes high when power is applied.
The third patch adds the device tree nodes to rockpro64 to permit the
panel to be used.

Changelog:
v2:
- Drop patch 4 so we don't "enable" the nodes
- Drop the unnecessary null checks
- Rebase to 5.18-rc1

Peter Geis (3):
  dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio
    optional
  drm/panel: feiyang-fy07024di26a30d: make reset gpio optional
  arm64: dts: rockchip: add pine64 touch panel display to rockpro64

 .../panel/feiyang,fy07024di26a30d.yaml        |  1 -
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 80 ++++++++++++++++++-
 .../drm/panel/panel-feiyang-fy07024di26a30d.c |  2 +-
 3 files changed, 77 insertions(+), 6 deletions(-)

-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Peter Geis]

Good Morning,

Apologies Heiko on taking so long for this v2.

This patch series adds support for the Pine64 touch panel to the
rockpro64 single board computer.
This panel attaches to the dsi port and includes an i2c touch screen.

The first two patches involve making the reset pin to the Feiyang
fy07024di26a30d panel optional. On the rockpro64 and quartz64-a this pin
is tied to dvdd and automatically comes high when power is applied.
The third patch adds the device tree nodes to rockpro64 to permit the
panel to be used.

Changelog:
v2:
- Drop patch 4 so we don't "enable" the nodes
- Drop the unnecessary null checks
- Rebase to 5.18-rc1

Peter Geis (3):
  dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio
    optional
  drm/panel: feiyang-fy07024di26a30d: make reset gpio optional
  arm64: dts: rockchip: add pine64 touch panel display to rockpro64

 .../panel/feiyang,fy07024di26a30d.yaml        |  1 -
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 80 ++++++++++++++++++-
 .../drm/panel/panel-feiyang-fy07024di26a30d.c |  2 +-
 3 files changed, 77 insertions(+), 6 deletions(-)

-- 
2.25.1

[PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Peter Geis]

Good Morning,

Apologies Heiko on taking so long for this v2.

This patch series adds support for the Pine64 touch panel to the
rockpro64 single board computer.
This panel attaches to the dsi port and includes an i2c touch screen.

The first two patches involve making the reset pin to the Feiyang
fy07024di26a30d panel optional. On the rockpro64 and quartz64-a this pin
is tied to dvdd and automatically comes high when power is applied.
The third patch adds the device tree nodes to rockpro64 to permit the
panel to be used.

Changelog:
v2:
- Drop patch 4 so we don't "enable" the nodes
- Drop the unnecessary null checks
- Rebase to 5.18-rc1

Peter Geis (3):
  dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio
    optional
  drm/panel: feiyang-fy07024di26a30d: make reset gpio optional
  arm64: dts: rockchip: add pine64 touch panel display to rockpro64

 .../panel/feiyang,fy07024di26a30d.yaml        |  1 -
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 80 ++++++++++++++++++-
 .../drm/panel/panel-feiyang-fy07024di26a30d.c |  2 +-
 3 files changed, 77 insertions(+), 6 deletions(-)

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/3] dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional

[Peter Geis]

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/display/panel/feiyang,fy07024di26a30d.yaml          | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
index 95acf9e96f1c..1cf84c8dd85e 100644
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -35,7 +35,6 @@ required:
   - reg
   - avdd-supply
   - dvdd-supply
-  - reset-gpios
 
 additionalProperties: false
 
-- 
2.25.1

[PATCH v2 1/3] dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional

[Peter Geis]

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/display/panel/feiyang,fy07024di26a30d.yaml          | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
index 95acf9e96f1c..1cf84c8dd85e 100644
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -35,7 +35,6 @@ required:
   - reg
   - avdd-supply
   - dvdd-supply
-  - reset-gpios
 
 additionalProperties: false
 
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v2 1/3] dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional

[Peter Geis]

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/display/panel/feiyang,fy07024di26a30d.yaml          | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
index 95acf9e96f1c..1cf84c8dd85e 100644
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -35,7 +35,6 @@ required:
   - reg
   - avdd-supply
   - dvdd-supply
-  - reset-gpios
 
 additionalProperties: false
 
-- 
2.25.1

[PATCH v2 1/3] dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional

[Peter Geis]

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/display/panel/feiyang,fy07024di26a30d.yaml          | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
index 95acf9e96f1c..1cf84c8dd85e 100644
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -35,7 +35,6 @@ required:
   - reg
   - avdd-supply
   - dvdd-supply
-  - reset-gpios
 
 additionalProperties: false
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/3] drm/panel: feiyang-fy07024di26a30d: make reset gpio optional

[Peter Geis]

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
index a9cd7135cb51..ee61d60eceae 100644
--- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
+++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
@@ -209,7 +209,7 @@ static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd),
 				     "Couldn't get avdd regulator\n");
 
-	ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+	ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset))
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
 				     "Couldn't get our reset GPIO\n");
-- 
2.25.1

[PATCH v2 2/3] drm/panel: feiyang-fy07024di26a30d: make reset gpio optional

[Peter Geis]

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
index a9cd7135cb51..ee61d60eceae 100644
--- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
+++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
@@ -209,7 +209,7 @@ static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd),
 				     "Couldn't get avdd regulator\n");
 
-	ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+	ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset))
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
 				     "Couldn't get our reset GPIO\n");
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v2 2/3] drm/panel: feiyang-fy07024di26a30d: make reset gpio optional

[Peter Geis]

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
index a9cd7135cb51..ee61d60eceae 100644
--- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
+++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
@@ -209,7 +209,7 @@ static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd),
 				     "Couldn't get avdd regulator\n");
 
-	ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+	ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset))
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
 				     "Couldn't get our reset GPIO\n");
-- 
2.25.1

[PATCH v2 2/3] drm/panel: feiyang-fy07024di26a30d: make reset gpio optional

[Peter Geis]

Some implementations do not use the reset signal, instead tying it to dvdd.
Make the reset gpio optional to permit this.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
index a9cd7135cb51..ee61d60eceae 100644
--- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
+++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
@@ -209,7 +209,7 @@ static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd),
 				     "Couldn't get avdd regulator\n");
 
-	ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+	ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset))
 		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
 				     "Couldn't get our reset GPIO\n");
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/3] arm64: dts: rockchip: add pine64 touch panel display to rockpro64

[Peter Geis]

The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
panel with a Goodix gt911 touch screen. Add the device tree nodes to the
rockpro64 to permit attaching this display to the device.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 80 ++++++++++++++++++-
 1 file changed, 76 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 45e77f86d329..f0fb450ddba6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -20,6 +20,15 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	/* enable for panel backlight support */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		status = "disabled";
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -220,6 +229,14 @@ vdd_log: vdd-log {
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1700000>;
 	};
+
+	avdd: avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <11000000>;
+		regulator-max-microvolt = <11000000>;
+		vin-supply = <&vcc3v3_s0>;
+	};
 };
 
 &cpu_l0 {
@@ -301,6 +318,11 @@ &hdmi {
 	status = "okay";
 };
 
+/* force hdmi to vopb */
+&hdmi_in_vopl {
+	status = "disabled";
+};
+
 &hdmi_sound {
 	status = "okay";
 };
@@ -400,8 +422,6 @@ regulator-state-mem {
 
 			vcc3v0_touch: LDO_REG2 {
 				regulator-name = "vcc3v0_touch";
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
@@ -490,8 +510,6 @@ regulator-state-mem {
 
 			vcc3v3_s0: SWITCH_REG2 {
 				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -565,6 +583,19 @@ fusb0: typec-portc@22 {
 		vbus-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};
+
+	/* enable for pine64 touch screen support */
+	touch: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
 };
 
 &i2s0 {
@@ -600,6 +631,47 @@ &io_domains {
 	gpio1830-supply = <&vcc_3v0>;
 };
 
+/* enable for pine64 panel display support */
+&mipi_dsi {
+	status = "disabled";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		compatible = "feiyang,fy07024di26a30d";
+		reg = <0>;
+		avdd-supply = <&avdd>;
+		backlight = <&backlight>;
+		dvdd-supply = <&vcc3v3_s0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+/* force dsi to vopl */
+&mipi_in_vopb {
+	status="disabled";
+};
+
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
-- 
2.25.1

[PATCH v2 3/3] arm64: dts: rockchip: add pine64 touch panel display to rockpro64

[Peter Geis]

The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
panel with a Goodix gt911 touch screen. Add the device tree nodes to the
rockpro64 to permit attaching this display to the device.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 80 ++++++++++++++++++-
 1 file changed, 76 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 45e77f86d329..f0fb450ddba6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -20,6 +20,15 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	/* enable for panel backlight support */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		status = "disabled";
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -220,6 +229,14 @@ vdd_log: vdd-log {
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1700000>;
 	};
+
+	avdd: avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <11000000>;
+		regulator-max-microvolt = <11000000>;
+		vin-supply = <&vcc3v3_s0>;
+	};
 };
 
 &cpu_l0 {
@@ -301,6 +318,11 @@ &hdmi {
 	status = "okay";
 };
 
+/* force hdmi to vopb */
+&hdmi_in_vopl {
+	status = "disabled";
+};
+
 &hdmi_sound {
 	status = "okay";
 };
@@ -400,8 +422,6 @@ regulator-state-mem {
 
 			vcc3v0_touch: LDO_REG2 {
 				regulator-name = "vcc3v0_touch";
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
@@ -490,8 +510,6 @@ regulator-state-mem {
 
 			vcc3v3_s0: SWITCH_REG2 {
 				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -565,6 +583,19 @@ fusb0: typec-portc@22 {
 		vbus-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};
+
+	/* enable for pine64 touch screen support */
+	touch: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
 };
 
 &i2s0 {
@@ -600,6 +631,47 @@ &io_domains {
 	gpio1830-supply = <&vcc_3v0>;
 };
 
+/* enable for pine64 panel display support */
+&mipi_dsi {
+	status = "disabled";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		compatible = "feiyang,fy07024di26a30d";
+		reg = <0>;
+		avdd-supply = <&avdd>;
+		backlight = <&backlight>;
+		dvdd-supply = <&vcc3v3_s0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+/* force dsi to vopl */
+&mipi_in_vopb {
+	status="disabled";
+};
+
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v2 3/3] arm64: dts: rockchip: add pine64 touch panel display to rockpro64

[Peter Geis]

The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
panel with a Goodix gt911 touch screen. Add the device tree nodes to the
rockpro64 to permit attaching this display to the device.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 80 ++++++++++++++++++-
 1 file changed, 76 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 45e77f86d329..f0fb450ddba6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -20,6 +20,15 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	/* enable for panel backlight support */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		status = "disabled";
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -220,6 +229,14 @@ vdd_log: vdd-log {
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1700000>;
 	};
+
+	avdd: avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <11000000>;
+		regulator-max-microvolt = <11000000>;
+		vin-supply = <&vcc3v3_s0>;
+	};
 };
 
 &cpu_l0 {
@@ -301,6 +318,11 @@ &hdmi {
 	status = "okay";
 };
 
+/* force hdmi to vopb */
+&hdmi_in_vopl {
+	status = "disabled";
+};
+
 &hdmi_sound {
 	status = "okay";
 };
@@ -400,8 +422,6 @@ regulator-state-mem {
 
 			vcc3v0_touch: LDO_REG2 {
 				regulator-name = "vcc3v0_touch";
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
@@ -490,8 +510,6 @@ regulator-state-mem {
 
 			vcc3v3_s0: SWITCH_REG2 {
 				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -565,6 +583,19 @@ fusb0: typec-portc@22 {
 		vbus-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};
+
+	/* enable for pine64 touch screen support */
+	touch: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
 };
 
 &i2s0 {
@@ -600,6 +631,47 @@ &io_domains {
 	gpio1830-supply = <&vcc_3v0>;
 };
 
+/* enable for pine64 panel display support */
+&mipi_dsi {
+	status = "disabled";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		compatible = "feiyang,fy07024di26a30d";
+		reg = <0>;
+		avdd-supply = <&avdd>;
+		backlight = <&backlight>;
+		dvdd-supply = <&vcc3v3_s0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+/* force dsi to vopl */
+&mipi_in_vopb {
+	status="disabled";
+};
+
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
-- 
2.25.1

[PATCH v2 3/3] arm64: dts: rockchip: add pine64 touch panel display to rockpro64

[Peter Geis]

The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
panel with a Goodix gt911 touch screen. Add the device tree nodes to the
rockpro64 to permit attaching this display to the device.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 .../boot/dts/rockchip/rk3399-rockpro64.dtsi   | 80 ++++++++++++++++++-
 1 file changed, 76 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 45e77f86d329..f0fb450ddba6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -20,6 +20,15 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	/* enable for panel backlight support */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		status = "disabled";
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -220,6 +229,14 @@ vdd_log: vdd-log {
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1700000>;
 	};
+
+	avdd: avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <11000000>;
+		regulator-max-microvolt = <11000000>;
+		vin-supply = <&vcc3v3_s0>;
+	};
 };
 
 &cpu_l0 {
@@ -301,6 +318,11 @@ &hdmi {
 	status = "okay";
 };
 
+/* force hdmi to vopb */
+&hdmi_in_vopl {
+	status = "disabled";
+};
+
 &hdmi_sound {
 	status = "okay";
 };
@@ -400,8 +422,6 @@ regulator-state-mem {
 
 			vcc3v0_touch: LDO_REG2 {
 				regulator-name = "vcc3v0_touch";
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
@@ -490,8 +510,6 @@ regulator-state-mem {
 
 			vcc3v3_s0: SWITCH_REG2 {
 				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -565,6 +583,19 @@ fusb0: typec-portc@22 {
 		vbus-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};
+
+	/* enable for pine64 touch screen support */
+	touch: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
 };
 
 &i2s0 {
@@ -600,6 +631,47 @@ &io_domains {
 	gpio1830-supply = <&vcc_3v0>;
 };
 
+/* enable for pine64 panel display support */
+&mipi_dsi {
+	status = "disabled";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		compatible = "feiyang,fy07024di26a30d";
+		reg = <0>;
+		avdd-supply = <&avdd>;
+		backlight = <&backlight>;
+		dvdd-supply = <&vcc3v3_s0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+/* force dsi to vopl */
+&mipi_in_vopb {
+	status="disabled";
+};
+
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Heiko Stuebner]

On Wed, 11 May 2022 07:35:13 -0400, Peter Geis wrote:
> Good Morning,
> 
> Apologies Heiko on taking so long for this v2.
> 
> This patch series adds support for the Pine64 touch panel to the
> rockpro64 single board computer.
> This panel attaches to the dsi port and includes an i2c touch screen.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional
      commit: d0956e2c520c9d730979a9669f27a77d40acac13
[2/3] drm/panel: feiyang-fy07024di26a30d: make reset gpio optional
      commit: de5db71e4c8c35ed5e92006e3064ce9230881ece

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Heiko Stuebner]

On Wed, 11 May 2022 07:35:13 -0400, Peter Geis wrote:
> Good Morning,
> 
> Apologies Heiko on taking so long for this v2.
> 
> This patch series adds support for the Pine64 touch panel to the
> rockpro64 single board computer.
> This panel attaches to the dsi port and includes an i2c touch screen.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional
      commit: d0956e2c520c9d730979a9669f27a77d40acac13
[2/3] drm/panel: feiyang-fy07024di26a30d: make reset gpio optional
      commit: de5db71e4c8c35ed5e92006e3064ce9230881ece

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Heiko Stuebner]

On Wed, 11 May 2022 07:35:13 -0400, Peter Geis wrote:
> Good Morning,
> 
> Apologies Heiko on taking so long for this v2.
> 
> This patch series adds support for the Pine64 touch panel to the
> rockpro64 single board computer.
> This panel attaches to the dsi port and includes an i2c touch screen.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional
      commit: d0956e2c520c9d730979a9669f27a77d40acac13
[2/3] drm/panel: feiyang-fy07024di26a30d: make reset gpio optional
      commit: de5db71e4c8c35ed5e92006e3064ce9230881ece

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: (subset) [PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Heiko Stuebner]

On Wed, 11 May 2022 07:35:13 -0400, Peter Geis wrote:
> Good Morning,
> 
> Apologies Heiko on taking so long for this v2.
> 
> This patch series adds support for the Pine64 touch panel to the
> rockpro64 single board computer.
> This panel attaches to the dsi port and includes an i2c touch screen.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: display: panel: feiyang, fy07024di26a30d: make reset gpio optional
      commit: d0956e2c520c9d730979a9669f27a77d40acac13
[2/3] drm/panel: feiyang-fy07024di26a30d: make reset gpio optional
      commit: de5db71e4c8c35ed5e92006e3064ce9230881ece

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: (subset) [PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Heiko Stuebner]

On Wed, 11 May 2022 07:35:13 -0400, Peter Geis wrote:
> Good Morning,
> 
> Apologies Heiko on taking so long for this v2.
> 
> This patch series adds support for the Pine64 touch panel to the
> rockpro64 single board computer.
> This panel attaches to the dsi port and includes an i2c touch screen.
> 
> [...]

Applied, thanks!

[3/3] arm64: dts: rockchip: add pine64 touch panel display to rockpro64
 ... for 5.20 .

The binding- and driver-change most likely won't reach drm-main and thus
the next merge-window in time, so I've put the dts patch on a branch for
5.20 instead.

I've also made some ordering changes and dropped both the "force X to vopY"
parts. DT is a hardware-description and not a configuration space ;-) .
And a devicetree should definitly not try to work around implementation
deficits of the kernel driver.

Both VOPs are capable of driving both hdmi and dsi with their relevant
deficiencies being in terms of resolution or clock rates I guess, so
anything related to selecting a matching VOP should be done in code in
the kernel.


Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Heiko Stuebner]

On Wed, 11 May 2022 07:35:13 -0400, Peter Geis wrote:
> Good Morning,
> 
> Apologies Heiko on taking so long for this v2.
> 
> This patch series adds support for the Pine64 touch panel to the
> rockpro64 single board computer.
> This panel attaches to the dsi port and includes an i2c touch screen.
> 
> [...]

Applied, thanks!

[3/3] arm64: dts: rockchip: add pine64 touch panel display to rockpro64
 ... for 5.20 .

The binding- and driver-change most likely won't reach drm-main and thus
the next merge-window in time, so I've put the dts patch on a branch for
5.20 instead.

I've also made some ordering changes and dropped both the "force X to vopY"
parts. DT is a hardware-description and not a configuration space ;-) .
And a devicetree should definitly not try to work around implementation
deficits of the kernel driver.

Both VOPs are capable of driving both hdmi and dsi with their relevant
deficiencies being in terms of resolution or clock rates I guess, so
anything related to selecting a matching VOP should be done in code in
the kernel.


Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: (subset) [PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Heiko Stuebner]

On Wed, 11 May 2022 07:35:13 -0400, Peter Geis wrote:
> Good Morning,
> 
> Apologies Heiko on taking so long for this v2.
> 
> This patch series adds support for the Pine64 touch panel to the
> rockpro64 single board computer.
> This panel attaches to the dsi port and includes an i2c touch screen.
> 
> [...]

Applied, thanks!

[3/3] arm64: dts: rockchip: add pine64 touch panel display to rockpro64
 ... for 5.20 .

The binding- and driver-change most likely won't reach drm-main and thus
the next merge-window in time, so I've put the dts patch on a branch for
5.20 instead.

I've also made some ordering changes and dropped both the "force X to vopY"
parts. DT is a hardware-description and not a configuration space ;-) .
And a devicetree should definitly not try to work around implementation
deficits of the kernel driver.

Both VOPs are capable of driving both hdmi and dsi with their relevant
deficiencies being in terms of resolution or clock rates I guess, so
anything related to selecting a matching VOP should be done in code in
the kernel.


Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH v2 0/3] add Pine64 touch panel support to rockpro64

[Heiko Stuebner]

On Wed, 11 May 2022 07:35:13 -0400, Peter Geis wrote:
> Good Morning,
> 
> Apologies Heiko on taking so long for this v2.
> 
> This patch series adds support for the Pine64 touch panel to the
> rockpro64 single board computer.
> This panel attaches to the dsi port and includes an i2c touch screen.
> 
> [...]

Applied, thanks!

[3/3] arm64: dts: rockchip: add pine64 touch panel display to rockpro64
 ... for 5.20 .

The binding- and driver-change most likely won't reach drm-main and thus
the next merge-window in time, so I've put the dts patch on a branch for
5.20 instead.

I've also made some ordering changes and dropped both the "force X to vopY"
parts. DT is a hardware-description and not a configuration space ;-) .
And a devicetree should definitly not try to work around implementation
deficits of the kernel driver.

Both VOPs are capable of driving both hdmi and dsi with their relevant
deficiencies being in terms of resolution or clock rates I guess, so
anything related to selecting a matching VOP should be done in code in
the kernel.


Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel