[PATCH v3 1/4] baseband/acc100: introduce PMD for ACC101

[Nicolas Chautru <nicolas.chautru@intel.com>]

Support for ACC101 as a derivative of ACC100.
Reusing existing code when possible.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 doc/guides/bbdevs/acc101.rst             | 237 +++++++++++++++++++++++++++++++
 doc/guides/bbdevs/features/acc101.ini    |  13 ++
 doc/guides/bbdevs/index.rst              |   1 +
 doc/guides/rel_notes/release_22_07.rst   |   4 +
 drivers/baseband/acc100/rte_acc100_pmd.c | 194 ++++++++++++++++++++++++-
 drivers/baseband/acc100/rte_acc100_pmd.h |   6 +
 drivers/baseband/acc100/rte_acc101_pmd.h |  65 +++++++++
 7 files changed, 515 insertions(+), 5 deletions(-)
 create mode 100644 doc/guides/bbdevs/acc101.rst
 create mode 100644 doc/guides/bbdevs/features/acc101.ini
 create mode 100644 drivers/baseband/acc100/rte_acc101_pmd.h

diff --git a/doc/guides/bbdevs/acc101.rst b/doc/guides/bbdevs/acc101.rst
new file mode 100644
index 0000000..46c310b
--- /dev/null
+++ b/doc/guides/bbdevs/acc101.rst
@@ -0,0 +1,237 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2020 Intel Corporation
+
+Intel(R) ACC101 5G/4G FEC Poll Mode Driver
+==========================================
+
+The BBDEV ACC101 5G/4G FEC poll mode driver (PMD) supports an
+implementation of a VRAN FEC wireless acceleration function.
+This device is also known as Mount Cirrus.
+This is a follow-up to Mount Bryce (ACC100) and includes fixes, improved
+feature set for error scenarios and performance capacity increase.
+
+Features
+--------
+
+ACC101 5G/4G FEC PMD supports the following features:
+
+- LDPC Encode in the DL (5GNR)
+- LDPC Decode in the UL (5GNR)
+- Turbo Encode in the DL (4G)
+- Turbo Decode in the UL (4G)
+- 16 VFs per PF (physical device)
+- Maximum of 128 queues per VF
+- PCIe Gen-3 x16 Interface
+- MSI
+- SR-IOV
+
+ACC101 5G/4G FEC PMD supports the following BBDEV capabilities:
+
+* For the LDPC encode operation:
+   - ``RTE_BBDEV_LDPC_CRC_24B_ATTACH`` :  set to attach CRC24B to CB(s)
+   - ``RTE_BBDEV_LDPC_RATE_MATCH`` :  if set then do not do Rate Match bypass
+   - ``RTE_BBDEV_LDPC_INTERLEAVER_BYPASS`` : if set then bypass interleaver
+
+* For the LDPC decode operation:
+   - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK`` :  check CRC24B from CB(s)
+   - ``RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE`` :  disable early termination
+   - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP`` :  drops CRC24B bits appended while decoding
+   - ``RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE`` :  provides an input for HARQ combining
+   - ``RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE`` :  provides an input for HARQ combining
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE`` :  HARQ memory input is internal
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE`` :  HARQ memory output is internal
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK`` :  loopback data to/from HARQ memory
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS`` :  HARQ memory includes the fillers bits
+   - ``RTE_BBDEV_LDPC_DEC_SCATTER_GATHER`` :  supports scatter-gather for input/output data
+   - ``RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION`` :  supports compression of the HARQ input/output
+   - ``RTE_BBDEV_LDPC_LLR_COMPRESSION`` :  supports LLR input compression
+
+* For the turbo encode operation:
+   - ``RTE_BBDEV_TURBO_CRC_24B_ATTACH`` :  set to attach CRC24B to CB(s)
+   - ``RTE_BBDEV_TURBO_RATE_MATCH`` :  if set then do not do Rate Match bypass
+   - ``RTE_BBDEV_TURBO_ENC_INTERRUPTS`` :  set for encoder dequeue interrupts
+   - ``RTE_BBDEV_TURBO_RV_INDEX_BYPASS`` :  set to bypass RV index
+   - ``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER`` :  supports scatter-gather for input/output data
+
+* For the turbo decode operation:
+   - ``RTE_BBDEV_TURBO_CRC_TYPE_24B`` :  check CRC24B from CB(s)
+   - ``RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE`` :  perform subblock de-interleave
+   - ``RTE_BBDEV_TURBO_DEC_INTERRUPTS`` :  set for decoder dequeue interrupts
+   - ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN`` :  set if negative LLR encoder i/p is supported
+   - ``RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN`` :  set if positive LLR encoder i/p is supported
+   - ``RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP`` :  keep CRC24B bits appended while decoding
+   - ``RTE_BBDEV_TURBO_DEC_CRC_24B_DROP`` : option to drop the code block CRC after decoding
+   - ``RTE_BBDEV_TURBO_EARLY_TERMINATION`` :  set early termination feature
+   - ``RTE_BBDEV_TURBO_DEC_SCATTER_GATHER`` :  supports scatter-gather for input/output data
+   - ``RTE_BBDEV_TURBO_HALF_ITERATION_EVEN`` :  set half iteration granularity
+
+Installation
+------------
+
+Section 3 of the DPDK manual provides instructions on installing and compiling DPDK.
+
+DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual.
+The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
+hugepage configuration of a server may be examined using:
+
+.. code-block:: console
+
+   grep Huge* /proc/meminfo
+
+
+Initialization
+--------------
+
+When the device first powers up, its PCI Physical Functions (PF) can be listed through this command:
+
+.. code-block:: console
+
+  sudo lspci -vd8086:57c4
+
+The physical and virtual functions are compatible with Linux UIO drivers:
+``vfio`` and ``igb_uio``. However, in order to work the ACC101 5G/4G
+FEC device first needs to be bound to one of these linux drivers through DPDK.
+
+
+Bind PF UIO driver(s)
+~~~~~~~~~~~~~~~~~~~~~
+
+Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
+``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
+
+The igb_uio driver may be bound to the PF PCI device using one of two methods:
+
+
+1. PCI functions (physical or virtual, depending on the use case) can be bound to
+the UIO driver by repeating this command for every function.
+
+.. code-block:: console
+
+  cd <dpdk-top-level-directory>
+  insmod ./build/kmod/igb_uio.ko
+  echo "8086 57c4" > /sys/bus/pci/drivers/igb_uio/new_id
+  lspci -vd8086:57c4
+
+
+2. Another way to bind PF with DPDK UIO driver is by using the ``dpdk-devbind.py`` tool
+
+.. code-block:: console
+
+  cd <dpdk-top-level-directory>
+  ./usertools/dpdk-devbind.py -b igb_uio 0000:06:00.0
+
+where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:57c4
+
+
+In a similar way the ACC101 5G/4G FEC PF may be bound with vfio-pci as any PCIe device.
+
+
+Enable Virtual Functions
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Now, it should be visible in the printouts that PCI PF is under igb_uio control
+"``Kernel driver in use: igb_uio``"
+
+To show the number of available VFs on the device, read ``sriov_totalvfs`` file..
+
+.. code-block:: console
+
+  cat /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_totalvfs
+
+  where 0000\:<b>\:<d>.<f> is the PCI device ID
+
+
+To enable VFs via igb_uio, echo the number of virtual functions intended to
+enable to ``max_vfs`` file..
+
+.. code-block:: console
+
+  echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/max_vfs
+
+
+Afterwards, all VFs must be bound to appropriate UIO drivers as required, same
+way it was done with the physical function previously.
+
+Enabling SR-IOV via vfio driver is pretty much the same, except that the file
+name is different:
+
+.. code-block:: console
+
+  echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_numvfs
+
+
+Configure the VFs through PF
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The PCI virtual functions must be configured before working or getting assigned
+to VMs/Containers. The configuration involves allocating the number of hardware
+queues, priorities, load balance, bandwidth and other settings necessary for the
+device to perform FEC functions.
+
+This configuration needs to be executed at least once after reboot or PCI FLR and can
+be achieved by using the function ``acc101_configure()``, which sets up the
+parameters defined in ``acc100_conf`` structure.
+
+Test Application
+----------------
+
+BBDEV provides a test application, ``test-bbdev.py`` and range of test data for testing
+the functionality of ACC101 5G/4G FEC encode and decode, depending on the device's
+capabilities. The test application is located under app->test-bbdev folder and has the
+following options:
+
+.. code-block:: console
+
+  "-p", "--testapp-path": specifies path to the bbdev test app.
+  "-e", "--eal-params"	: EAL arguments which are passed to the test app.
+  "-t", "--timeout"	: Timeout in seconds (default=300).
+  "-c", "--test-cases"	: Defines test cases to run. Run all if not specified.
+  "-v", "--test-vector"	: Test vector path (default=dpdk_path+/app/test-bbdev/test_vectors/bbdev_null.data).
+  "-n", "--num-ops"	: Number of operations to process on device (default=32).
+  "-b", "--burst-size"	: Operations enqueue/dequeue burst size (default=32).
+  "-s", "--snr"		: SNR in dB used when generating LLRs for bler tests.
+  "-s", "--iter_max"	: Number of iterations for LDPC decoder.
+  "-l", "--num-lcores"	: Number of lcores to run (default=16).
+  "-i", "--init-device" : Initialise PF device with default values.
+
+
+To execute the test application tool using simple decode or encode data,
+type one of the following:
+
+.. code-block:: console
+
+  ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_dec_default.data
+  ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_enc_default.data
+
+
+The test application ``test-bbdev.py``, supports the ability to configure the PF device with
+a default set of values, if the "-i" or "- -init-device" option is included. The default values
+are defined in test_bbdev_perf.c.
+
+
+Test Vectors
+~~~~~~~~~~~~
+
+In addition to the simple LDPC decoder and LDPC encoder tests, bbdev also provides
+a range of additional tests under the test_vectors folder, which may be useful. The results
+of these tests will depend on the ACC101 5G/4G FEC capabilities which may cause some
+testcases to be skipped, but no failure should be reported.
+
+
+Alternate Baseband Device configuration tool
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+On top of the embedded configuration feature supported in test-bbdev using "- -init-device"
+option mentioned above, there is also a tool available to perform that device configuration
+using a companion application.
+The ``pf_bb_config`` application notably enables then to run bbdev-test from the VF
+and not only limited to the PF as captured above.
+
+See for more details: https://github.com/intel/pf-bb-config
+
+Specifically for the BBDEV ACC101 PMD, the command below can be used:
+
+.. code-block:: console
+
+  ./pf_bb_config ACC101 -c acc101/acc101_config_4vf_4g5g.cfg
+  ./test-bbdev.py -e="-c 0xff0 -a${VF_PCI_ADDR}" -c validation -l 1 -v ./ldpc_dec_default.data
\ No newline at end of file
diff --git a/doc/guides/bbdevs/features/acc101.ini b/doc/guides/bbdevs/features/acc101.ini
new file mode 100644
index 0000000..0e2c21a
--- /dev/null
+++ b/doc/guides/bbdevs/features/acc101.ini
@@ -0,0 +1,13 @@
+;
+; Supported features of the 'acc101' bbdev driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Turbo Decoder (4G)     = Y
+Turbo Encoder (4G)     = Y
+LDPC Decoder (5G)      = Y
+LDPC Encoder (5G)      = Y
+LLR/HARQ Compression   = Y
+External DDR Access    = Y
+HW Accelerated         = Y
diff --git a/doc/guides/bbdevs/index.rst b/doc/guides/bbdevs/index.rst
index cedd706..e76883c 100644
--- a/doc/guides/bbdevs/index.rst
+++ b/doc/guides/bbdevs/index.rst
@@ -14,4 +14,5 @@ Baseband Device Drivers
     fpga_lte_fec
     fpga_5gnr_fec
     acc100
+    acc101
     la12xx
diff --git a/doc/guides/rel_notes/release_22_07.rst b/doc/guides/rel_notes/release_22_07.rst
index 42a5f2d..ef9906b 100644
--- a/doc/guides/rel_notes/release_22_07.rst
+++ b/doc/guides/rel_notes/release_22_07.rst
@@ -55,6 +55,10 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added Intel ACC101 baseband PMD.**
+
+  * Added a new baseband PMD for Intel ACC101 device (Mount Cirrus).
+  * See the :doc:`../bbdevs/acc101` for more details.
 
 Removed Items
 -------------
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
index de7e4bc..fca27ef 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.c
+++ b/drivers/baseband/acc100/rte_acc100_pmd.c
@@ -22,6 +22,7 @@
 #include <rte_bbdev.h>
 #include <rte_bbdev_pmd.h>
 #include "rte_acc100_pmd.h"
+#include "rte_acc101_pmd.h"
 
 #ifdef RTE_LIBRTE_BBDEV_DEBUG
 RTE_LOG_REGISTER_DEFAULT(acc100_logtype, DEBUG);
@@ -1286,6 +1287,12 @@
 			RTE_BBDEV_TURBO_HALF_ITERATION_EVEN);
 }
 
+static inline bool
+is_acc100(struct acc100_queue *q)
+{
+	return (q->d->device_variant == ACC100_VARIANT);
+}
+
 /* Fill in a frame control word for LDPC decoding. */
 static inline void
 acc100_fcw_ld_fill(const struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
@@ -1412,6 +1419,139 @@
 	}
 }
 
+/* Convert offset to harq index for harq_layout structure */
+static inline uint32_t hq_index(uint32_t offset)
+{
+	return (offset >> ACC100_HARQ_OFFSET_SHIFT) & ACC100_HARQ_OFFSET_MASK;
+}
+
+/* Fill in a frame control word for LDPC decoding for ACC101 */
+static inline void
+acc101_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
+		union acc100_harq_layout_data *harq_layout)
+{
+	uint16_t harq_out_length, harq_in_length, ncb_p, k0_p, parity_offset;
+	uint32_t harq_index;
+	uint32_t l;
+
+	fcw->qm = op->ldpc_dec.q_m;
+	fcw->nfiller = op->ldpc_dec.n_filler;
+	fcw->BG = (op->ldpc_dec.basegraph - 1);
+	fcw->Zc = op->ldpc_dec.z_c;
+	fcw->ncb = op->ldpc_dec.n_cb;
+	fcw->k0 = get_k0(fcw->ncb, fcw->Zc, op->ldpc_dec.basegraph,
+			op->ldpc_dec.rv_index);
+	if (op->ldpc_dec.code_block_mode == RTE_BBDEV_CODE_BLOCK)
+		fcw->rm_e = op->ldpc_dec.cb_params.e;
+	else
+		fcw->rm_e = (op->ldpc_dec.tb_params.r <
+				op->ldpc_dec.tb_params.cab) ?
+						op->ldpc_dec.tb_params.ea :
+						op->ldpc_dec.tb_params.eb;
+
+	if (unlikely(check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE) &&
+			(op->ldpc_dec.harq_combined_input.length == 0))) {
+		rte_bbdev_log(WARNING, "Null HARQ input size provided");
+		/* Disable HARQ input in that case to carry forward */
+		op->ldpc_dec.op_flags ^= RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE;
+	}
+
+	fcw->hcin_en = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE);
+	fcw->hcout_en = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE);
+	fcw->crc_select = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK);
+	fcw->bypass_dec = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_DECODE_BYPASS);
+	fcw->bypass_intlv = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS);
+	if (op->ldpc_dec.q_m == 1) {
+		fcw->bypass_intlv = 1;
+		fcw->qm = 2;
+	}
+	fcw->hcin_decomp_mode = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
+	fcw->hcout_comp_mode = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
+	fcw->llr_pack_mode = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_LLR_COMPRESSION);
+	harq_index = hq_index(op->ldpc_dec.harq_combined_output.offset);
+	if (fcw->hcin_en > 0) {
+		harq_in_length = op->ldpc_dec.harq_combined_input.length;
+		if (fcw->hcin_decomp_mode > 0)
+			harq_in_length = harq_in_length * 8 / 6;
+		harq_in_length = RTE_MIN(harq_in_length, op->ldpc_dec.n_cb
+				- op->ldpc_dec.n_filler);
+		/* Alignment on next 64B - Already enforced from HC output */
+		harq_in_length = RTE_ALIGN_FLOOR(harq_in_length, 64);
+		fcw->hcin_size0 = harq_in_length;
+		fcw->hcin_offset = 0;
+		fcw->hcin_size1 = 0;
+	} else {
+		fcw->hcin_size0 = 0;
+		fcw->hcin_offset = 0;
+		fcw->hcin_size1 = 0;
+	}
+
+	fcw->itmax = op->ldpc_dec.iter_max;
+	fcw->itstop = check_bit(op->ldpc_dec.op_flags,
+			RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE);
+	fcw->synd_precoder = fcw->itstop;
+	/*
+	 * These are all implicitly set
+	 * fcw->synd_post = 0;
+	 * fcw->so_en = 0;
+	 * fcw->so_bypass_rm = 0;
+	 * fcw->so_bypass_intlv = 0;
+	 * fcw->dec_convllr = 0;
+	 * fcw->hcout_convllr = 0;
+	 * fcw->hcout_size1 = 0;
+	 * fcw->so_it = 0;
+	 * fcw->hcout_offset = 0;
+	 * fcw->negstop_th = 0;
+	 * fcw->negstop_it = 0;
+	 * fcw->negstop_en = 0;
+	 * fcw->gain_i = 1;
+	 * fcw->gain_h = 1;
+	 */
+	if (fcw->hcout_en > 0) {
+		parity_offset = (op->ldpc_dec.basegraph == 1 ? 20 : 8)
+			* op->ldpc_dec.z_c - op->ldpc_dec.n_filler;
+		k0_p = (fcw->k0 > parity_offset) ?
+				fcw->k0 - op->ldpc_dec.n_filler : fcw->k0;
+		ncb_p = fcw->ncb - op->ldpc_dec.n_filler;
+		l = RTE_MIN(k0_p + fcw->rm_e, INT16_MAX);
+		harq_out_length = (uint16_t) fcw->hcin_size0;
+		harq_out_length = RTE_MAX(harq_out_length, l);
+		/* Cannot exceed the pruned Ncb circular buffer */
+		harq_out_length = RTE_MIN(harq_out_length, ncb_p);
+		/* Alignment on next 64B */
+		harq_out_length = RTE_ALIGN_CEIL(harq_out_length, 64);
+		fcw->hcout_size0 = harq_out_length;
+		fcw->hcout_size1 = 0;
+		fcw->hcout_offset = 0;
+		harq_layout[harq_index].offset = fcw->hcout_offset;
+		harq_layout[harq_index].size0 = fcw->hcout_size0;
+	} else {
+		fcw->hcout_size0 = 0;
+		fcw->hcout_size1 = 0;
+		fcw->hcout_offset = 0;
+	}
+}
+
+static inline void
+acc10x_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
+		union acc100_harq_layout_data *harq_layout, struct acc100_queue *q)
+{
+	if (is_acc100(q))
+		return acc100_fcw_ld_fill(op, fcw, harq_layout);
+	else
+		return acc101_fcw_ld_fill(op, fcw, harq_layout);
+}
+
+
 /**
  * Fills descriptor with data pointers of one block type.
  *
@@ -2960,7 +3100,7 @@
 		struct acc100_fcw_ld *fcw;
 		uint32_t seg_total_left;
 		fcw = &desc->req.fcw_ld;
-		acc100_fcw_ld_fill(op, fcw, harq_layout);
+		acc10x_fcw_ld_fill(op, fcw, harq_layout, q);
 
 		/* Special handling when overusing mbuf */
 		if (fcw->rm_e < ACC100_MAX_E_MBUF)
@@ -3027,7 +3167,7 @@
 	desc = q->ring_addr + desc_idx;
 	uint64_t fcw_offset = (desc_idx << 8) + ACC100_DESC_FCW_OFFSET;
 	union acc100_harq_layout_data *harq_layout = q->d->harq_layout;
-	acc100_fcw_ld_fill(op, &desc->req.fcw_ld, harq_layout);
+	acc10x_fcw_ld_fill(op, &desc->req.fcw_ld, harq_layout, q);
 
 	input = op->ldpc_dec.input.data;
 	h_output_head = h_output = op->ldpc_dec.hard_output.data;
@@ -4139,9 +4279,17 @@
 	dev->dequeue_ldpc_enc_ops = acc100_dequeue_ldpc_enc;
 	dev->dequeue_ldpc_dec_ops = acc100_dequeue_ldpc_dec;
 
-	((struct acc100_device *) dev->data->dev_private)->pf_device =
-			!strcmp(drv->driver.name,
-					RTE_STR(ACC100PF_DRIVER_NAME));
+	if ((!strcmp(drv->driver.name, RTE_STR(ACC100PF_DRIVER_NAME))) ||
+			(!strcmp(drv->driver.name, RTE_STR(ACC100VF_DRIVER_NAME)))) {
+		((struct acc100_device *) dev->data->dev_private)->pf_device =
+				!strcmp(drv->driver.name, RTE_STR(ACC100PF_DRIVER_NAME));
+		((struct acc100_device *) dev->data->dev_private)->device_variant = ACC100_VARIANT;
+	} else {
+		((struct acc100_device *) dev->data->dev_private)->pf_device =
+				!strcmp(drv->driver.name, RTE_STR(ACC101PF_DRIVER_NAME));
+		((struct acc100_device *) dev->data->dev_private)->device_variant = ACC101_VARIANT;
+	}
+
 	((struct acc100_device *) dev->data->dev_private)->mmio_base =
 			pci_dev->mem_resource[0].addr;
 
@@ -4251,6 +4399,42 @@ static int acc100_pci_remove(struct rte_pci_device *pci_dev)
 RTE_PMD_REGISTER_PCI(ACC100VF_DRIVER_NAME, acc100_pci_vf_driver);
 RTE_PMD_REGISTER_PCI_TABLE(ACC100VF_DRIVER_NAME, pci_id_acc100_vf_map);
 
+/* ACC101 PCI PF address map */
+static struct rte_pci_id pci_id_acc101_pf_map[] = {
+	{
+		RTE_PCI_DEVICE(RTE_ACC101_VENDOR_ID, RTE_ACC101_PF_DEVICE_ID)
+	},
+	{.device_id = 0},
+};
+
+/* ACC101 PCI VF address map */
+static struct rte_pci_id pci_id_acc101_vf_map[] = {
+	{
+		RTE_PCI_DEVICE(RTE_ACC101_VENDOR_ID, RTE_ACC101_VF_DEVICE_ID)
+	},
+	{.device_id = 0},
+};
+
+
+static struct rte_pci_driver acc101_pci_pf_driver = {
+		.probe = acc100_pci_probe,
+		.remove = acc100_pci_remove,
+		.id_table = pci_id_acc101_pf_map,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING
+};
+
+static struct rte_pci_driver acc101_pci_vf_driver = {
+		.probe = acc100_pci_probe,
+		.remove = acc100_pci_remove,
+		.id_table = pci_id_acc101_vf_map,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING
+};
+
+RTE_PMD_REGISTER_PCI(ACC101PF_DRIVER_NAME, acc101_pci_pf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(ACC101PF_DRIVER_NAME, pci_id_acc101_pf_map);
+RTE_PMD_REGISTER_PCI(ACC101VF_DRIVER_NAME, acc101_pci_vf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(ACC101VF_DRIVER_NAME, pci_id_acc101_vf_map);
+
 /*
  * Workaround implementation to fix the power on status of some 5GUL engines
  * This requires DMA permission if ported outside DPDK
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.h b/drivers/baseband/acc100/rte_acc100_pmd.h
index cbcece2..6438031 100644
--- a/drivers/baseband/acc100/rte_acc100_pmd.h
+++ b/drivers/baseband/acc100/rte_acc100_pmd.h
@@ -22,6 +22,9 @@
 #define rte_bbdev_log_debug(fmt, ...)
 #endif
 
+#define ACC100_VARIANT 0
+#define ACC101_VARIANT 1
+
 /* ACC100 PF and VF driver names */
 #define ACC100PF_DRIVER_NAME           intel_acc100_pf
 #define ACC100VF_DRIVER_NAME           intel_acc100_vf
@@ -67,6 +70,8 @@
 #define ACC100_HARQ_LAYOUT             (64*1024*1024)
 /* Assume offset for HARQ in memory */
 #define ACC100_HARQ_OFFSET             (32*1024)
+#define ACC100_HARQ_OFFSET_SHIFT       15
+#define ACC100_HARQ_OFFSET_MASK        0x7ffffff
 /* Mask used to calculate an index in an Info Ring array (not a byte offset) */
 #define ACC100_INFO_RING_MASK          (ACC100_INFO_RING_NUM_ENTRIES-1)
 /* Number of Virtual Functions ACC100 supports */
@@ -590,6 +595,7 @@ struct acc100_device {
 	uint16_t q_assigned_bit_map[ACC100_NUM_QGRPS];
 	bool pf_device; /**< True if this is a PF ACC100 device */
 	bool configured; /**< True if this ACC100 device is configured */
+	uint16_t device_variant;  /**< Device variant */
 };
 
 /**
diff --git a/drivers/baseband/acc100/rte_acc101_pmd.h b/drivers/baseband/acc100/rte_acc101_pmd.h
new file mode 100644
index 0000000..1c57f63
--- /dev/null
+++ b/drivers/baseband/acc100/rte_acc101_pmd.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation
+ */
+
+/* ACC101 PF and VF driver names */
+#define ACC101PF_DRIVER_NAME           intel_acc101_pf
+#define ACC101VF_DRIVER_NAME           intel_acc101_vf
+
+/* ACC101 PCI vendor & device IDs */
+#define RTE_ACC101_VENDOR_ID           (0x8086)
+#define RTE_ACC101_PF_DEVICE_ID        (0x57c4)
+#define RTE_ACC101_VF_DEVICE_ID        (0x57c5)
+
+/* Define as 1 to use only a single FEC engine */
+#ifndef RTE_ACC101_SINGLE_FEC
+#define RTE_ACC101_SINGLE_FEC 0
+#endif
+
+/* Values used in writing to the registers */
+#define ACC101_REG_IRQ_EN_ALL          0x1FF83FF  /* Enable all interrupts */
+
+/* Number of Virtual Functions ACC101 supports */
+#define ACC101_NUM_VFS                  16
+#define ACC101_NUM_QGRPS                8
+#define ACC101_NUM_AQS                  16
+/* All ACC101 Registers alignment are 32bits = 4B */
+#define ACC101_BYTES_IN_WORD                 4
+
+#define ACC101_GRP_ID_SHIFT    10 /* Queue Index Hierarchy */
+#define ACC101_VF_ID_SHIFT     4  /* Queue Index Hierarchy */
+#define ACC101_VF_OFFSET_QOS   16 /* offset in Memory specific to QoS Mon */
+#define ACC101_TMPL_PRI_0      0x03020100
+#define ACC101_TMPL_PRI_1      0x07060504
+#define ACC101_TMPL_PRI_2      0x0b0a0908
+#define ACC101_TMPL_PRI_3      0x0f0e0d0c
+#define ACC101_WORDS_IN_ARAM_SIZE (128 * 1024 / 4)
+
+#define ACC101_NUM_TMPL       32
+/* Mapping of signals for the available engines */
+#define ACC101_SIG_UL_5G      0
+#define ACC101_SIG_UL_5G_LAST 8
+#define ACC101_SIG_DL_5G      13
+#define ACC101_SIG_DL_5G_LAST 15
+#define ACC101_SIG_UL_4G      16
+#define ACC101_SIG_UL_4G_LAST 19
+#define ACC101_SIG_DL_4G      27
+#define ACC101_SIG_DL_4G_LAST 31
+#define ACC101_NUM_ACCS       5
+#define ACC101_PF_VAL         2
+
+/* ACC101 Configuration */
+#define ACC101_CFG_DMA_ERROR    0x3D7
+#define ACC101_CFG_AXI_CACHE    0x11
+#define ACC101_CFG_QMGR_HI_P    0x0F0F
+#define ACC101_CFG_PCI_AXI      0xC003
+#define ACC101_CFG_PCI_BRIDGE   0x40006033
+#define ACC101_ENGINE_OFFSET    0x1000
+#define ACC101_LONG_WAIT        1000
+#define ACC101_GPEX_AXIMAP_NUM  17
+#define ACC101_CLOCK_GATING_EN  0x30000
+#define ACC101_DMA_INBOUND      0x104
+/* DDR Size per VF - 512MB by default
+ * Can be increased up to 4 GB with single PF/VF
+ */
+#define ACC101_HARQ_DDR         (512 * 1)
-- 
1.8.3.1