Does anybody else have any idea about what is going on here?
Yocto is seeing my request to change the kernel config, suggests that the change is acceptable, but then doesn't make it.
Thanks in advance for any insight,
Greg
From: Greg Wilson-Lindberg
Sent: Tuesday, October 02, 2018 02:22 PM
To: yocto@yoctoproject.org
Subject: changing kernel config in Morty build
I'm trying to change some kernel configuration flags in a raspberrypi3 Morty build and I get warnings that it isn't working.
Here is the build info and warnings:
Build Configuration:
BB_VERSION = "1.32.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "universal"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "raspberrypi3"
DISTRO = "b2qt"
DISTRO_VERSION = "2.2.4"
TUNE_FEATURES = "arm armv7ve vfp thumb neon vfpv4 callconvention-hard cortexa7"
TARGET_FPU = "hard"
SDKMACHINE = "x86_64"
meta
meta-poky = "HEAD:df76669bdd70aa0d903c4211dde731221c7e756d"
meta-raspberrypi = "HEAD:2a192261a914892019f4f428d7462bb3c585ebac"
meta-oe
meta-python
meta-networking
meta-initramfs
meta-multimedia = "HEAD:b40116cf457b88a2db14b86fda9627fb34d56ae6"
meta-boot2qt
meta-raspberrypi-extras = "<unknown>:<unknown>"
meta-mingw = "HEAD:1c2e155111dce94423cc227ea69f7f50f316c78e"
meta-qt5 = "HEAD:49e9d9a73b5c6e3d6eab88dc0005305e85b1a62d"
meta-sakura = "<unknown>:<unknown>"
Initialising tasks: 100% |#############################################################################################################################################| Time: 0:00:00
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: linux-raspberrypi-1_4.4.50+gitAUTOINC+04c8e47067-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:
---------- CONFIG_SND_SOC_MAX9768 -----------------
Config: CONFIG_SND_SOC_MAX9768
From: /home/gwilson/Qt/Qt-5.9.6/Yocto-build-RPi3/build-raspberrypi3/tmp/work-shared/raspberrypi3/kernel-source/.kernel-meta/configs/Scribe.cfg
Requested value: CONFIG_SND_SOC_MAX9768=y
Actual value:
Config 'SND_SOC_MAX9768' has the following conditionals:
Dependency values are:
---------- CONFIG_MAX1363 -----------------
Config: CONFIG_MAX1363
From: /home/gwilson/Qt/Qt-5.9.6/Yocto-build-RPi3/build-raspberrypi3/tmp/work-shared/raspberrypi3/kernel-source/.kernel-meta/configs/Scribe.cfg
Requested value: CONFIG_MAX1363=m
Actual value: # CONFIG_MAX1363 is not set
Config 'MAX1363' has the following conditionals:
I2C (value: "y")
Dependency values are:
I2C [y]
---------- CONFIG_CAN_EMS_USB -----------------
Config: CONFIG_CAN_EMS_USB
From: /home/gwilson/Qt/Qt-5.9.6/Yocto-build-RPi3/build-raspberrypi3/tmp/work-shared/raspberrypi3/kernel-source/.kernel-meta/configs/Scribe.cfg
Requested value: CONFIG_CAN_EMS_USB=m
Actual value: # CONFIG_CAN_EMS_USB is not set
Config 'CAN_EMS_USB' has the following conditionals:
(none)
Dependency values are:
Here is my
linux-raspberrypi_4.4.bbappend for the kernel:
# Scribe additions to Kernel configuration
FILESEXTRAPATHS_prepend := "${FILE_DIRNAME}/files:"
FILESEXTRAPATHS_prepend := "${FILE_DIRNAME}/${PN}:"
SRC_URI += "file://Scribe.scc"
SRC_URI += "file://mcp251x.c.patch"
The Scribe.scc file:
# Scribe additions to kernel configuration
kconf hardware Scribe.cfg
And the Scribe.cfg file:
# Scribe additions to kernel configuration
# Enable MAX9768
#CONFIG_SOC_ALL_CODECS=m
#CONFIG_COMPILE_TEST=y
CONFIG_SND_SOC_MAX9768=y
# Enable MAX11606
#IIO=y
CONFIG_MAX1363=m
# Enable EMS CPC-USB
CONFIG_CAN_EMS_USB=m
Here is my directory tree:
Qt-5.9.6
Yocto-mirror # Yocto build mirror
Yocto-build-RPi3 # Yocto build root
build-raspberrypi # build directory
sources # yocto sources
meta-sakura # our recipes
recipes-kernel # directory for kernel changes
linux # directory that contains linux-raspberrypi_4.4.bbappend
files # directory that contains .scc & .cfg files
As seen above none of the changes are accepted although there is nothing that blocks any of them.
Any help understanding this would be greatly appreciated.
Regards,
Greg Wilson-Lindberg