FAILED: patch "[PATCH] net: dp83822: disable rx error interrupt" failed to apply to 4.19-stable tree

FAILED: patch "[PATCH] net: dp83822: disable rx error interrupt" failed to apply to 4.19-stable tree

[gregkh]

The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0e597e2affb90d6ea48df6890d882924acf71e19 Mon Sep 17 00:00:00 2001
From: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Date: Thu, 23 Jun 2022 15:46:45 +0200
Subject: [PATCH] net: dp83822: disable rx error interrupt

Some RX errors, notably when disconnecting the cable, increase the RCSR
register. Once half full (0x7fff), an interrupt flood is generated. I
measured ~3k/s interrupts even after the RX errors transfer was
stopped.

Since we don't read and clear the RCSR register, we should disable this
interrupt.

Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 95ef507053a6..8549e0e356c9 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -229,8 +229,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
 		if (misr_status < 0)
 			return misr_status;
 
-		misr_status |= (DP83822_RX_ERR_HF_INT_EN |
-				DP83822_LINK_STAT_INT_EN |
+		misr_status |= (DP83822_LINK_STAT_INT_EN |
 				DP83822_ENERGY_DET_INT_EN |
 				DP83822_LINK_QUAL_INT_EN);